KODIKKUNIL SURESH MP (LS) HIGH MAST PROVIDING IN KSRTC BUS STATION

SUPPLY OF TRISCOOTER

Supply of 12 M high mast shaft suitable for wind speed as per IS 875 Part-2, with raising lowering system comprising, head frame, luminaries carriage suitable to install 6 No luminaries in symmetrical arrangement, double drum winch, 6 mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightening finial etc as required. ( Bajaj/ Cromptom/ Equivalant

Foundation bolts manufactured from special steel along with Nuts, washers, anchor plates and templates

Supply of 200 w LED flood light luminaire (IP 65 protection) with aluminium alloy housing with scientifically designed extebded heat fins with open construction for facilitating faster heat dissipation, input voltage 100- 240 V and pf. > 95% surge protection uo to 6kA, efficency of Lumins shall be > 90 Lm/W. Housing finish done with corrosive powder coated by Nano technology optical and driver components shall be IP 66.( Make: Philips/ Crompton/Havells) (Warranty- 5 years)

Charges for errecting the 12 mts high mast lighting system including the following works:- Errection of the highmast with the help of suitable equipment and wiring of luminaires wirh 2.5 sq.mm wiring materials, connection to power tool, highmast, earth terminal and labour etc.

Earth work excavation in ordinary soil and depositing with a lead up to 50 m and lift up to 1.50 m including neat banking

Plain cement concrete 1:4:8 using 40mm ( Normal size ) broken stone. ( m3 )

Reinforcement for R.C.C works, bend tied and placed in position (plain grill requiring bend cold) using tor steel

Cement concrete 1:2:4 using 20mm (nominal size) broken stone for reinforced concrete work.

Form work for reinforced cement concrete in slabs including wooden planks, joists, bamboo posts and labour for taking down after completion of work (Hire and labour charges only)

Plastering with cement mortar 1:4, 12mm thick one coat.

Colour washing, two coats

Supply and providing pipe earthing as per IS 3043 with 3.60 m long 40 mm dia B class GI pipe, GI funnel with weld mesh, filling required quantity of charcoal & salt including construction of inspection chamber with a bed concrete of 1:4:8 PCC using 40 mm broken stone brick work in cement mortar 1:6, plastering the surface of brick masonry and the exposed surface of PCC bed with cement mortar 1:4, 12 mm thick, (the finished inside dimension shall be 300 x 300 x 300 mm) but excluding test joint, earth continuity conductor to the plate, and covering at the top. (in hard soil)

300 x 300 x 6 mm cast iron gully trap with covering

2 x 25 x 3 mm tinned copper strip

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required. - 3.15 mm copper conductor (10 SWG)

supply of superior quality copper earth socket for the following sizes of earth conductor including crimping etc. as required. - 3.15 mm (10 SWG)

Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required - 25 x 3 mm brass bolt & nut

Supply and laying strips of 25x3 mm GI sizes along with wiring/ cables and giving connection as required.

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of 2 core 6 sq.mm sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in hard soil).

Supplying siemens / tropodur type nickel plated compression brass cable gland for PVC insulated and PVC sheathed armoured aluminium/ copper conductor cable 1.1 KV grade, and making end termination suitable for 2/ 3/ 3½/ 4 core cable of 6 sq mm sizes as required.

4sqmm-16 sq mm with 12 mm wide x 1 mm thick clip

Supply of superior quality aluminium tubular cable socket and making core termination of cables of 6 sq. Mm sizes including crimping etc. as required.

Supplying, laying and jointing of 32/40 mm sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench

Supply and clamping 32 mm dia sizes of "B" class GI pipe on wall with all required accessories & clamps etc., including cutting and making good the walls, painting the exposed portions etc., as protective covering to earth leads / cables.

Supply and drawing 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

1.50 sq mm 2 run

4.00 sq mm 2 run

Fabrication, supply & installation of dust and vermin proof, wall mounting, Sintex make meter box of 600x600x 214 mm size suitable for fixing KSEB meter,fuse units, Timer, RCCB etc, hinged door construction for the front side with compartments if necessary, providing vision panel for the meter compartment, knock out for cable entry and exit.

Supplying and installation including all manner of supports/ suspenders, anchor bolts etc for metering cubicle made out of suitable size , slotted angles, flats, MS plates etc as required including painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.

Supply and installation of the following accessories suitable for 50 Hz , AC supply conforming to IS 8828-1995/ IEC 60898 of the following current ratings in the existing enclosure and giving connections as required

6 A to 25 A, 10 kA, DP MCB (C curve)

25 A, 2 pole, 100 mA RCCB

Single dial timer unit analog type

2 pole 32 A contactor

Control Relay

32A,415V HRC type kit kat fuse unit

25A HRC fuse link

2 way neutral Link

Aluminium anidised danger nitice board

Supply and fixing suitable size name Board made on Aluminium sheet on frame work with inscription there on, fixing it on suitable place as required

candelaengineering corporation