SYSTEM IMPROVEMENT AND AB CABLE WORK

Amount

Cartage of following material from Store Centre, Rudrapur to work site including loading at Store Centre & unloading at work site safely distance approx. upto 40 Km.

PCC Pole 8.5 Mtr. Long

11/0.4 KV 100 KVA T/F

11/0.4 KV 250 KVA T/F

Other Line Material & Conductor

Head Load Cartage of following material distance approx. upto 0-3 Km.

PCC Pole 8.5 Mtr. Long

11/0.4 KV 100 KVA T/F

Other Line Material & Conductor

Erection of following supports after digging of pits & back filling by soil with grouting of poles in case of S.T. Poles by CC mixture of ratio 1:4:8 including fitting of all accessories with the cost of required cement, sand, stone grit etc. complete in all respect as per RESPO Spn. & instruction of Engineer In Charge.

PCC Pole 8.5 Mtr. Long

D/P on PCC Pole

Digging of pits and grouting of stay by CC mixture of ratio 1:4:8 with binding & nozzling including cost of cement, sand & stone grit complete in all respect.

Fixing of M.S. Earthing rod 20x2500 for earthing of support including driving earth rod 2.5 mtr deep below ground level complete in all respects.

Removal of previous connection 1 Phase

Removal of previous connection 3 Phase

Laying, spreading, stringing & sagging of A.B. Cable 3x120+1x95 sq.mm. including binding on insulators and final jumpering.

Laying & fixing Insulated Cable 4x25 sq.mm.

Installation of LT. Distribution Box

Dismantling of old L.T. Line

1 Phase 2 Wire

2 Phase 3 Wire

3 Phase 4 Wire

Mounting of following T/Fs on Sub-Station D/P Structure including neutral & body earthing of T/F separately & making connection, jumpering etc. complete work as per direction of Engineer In Charge of the work.

11/0.4 KV 100 KVA T/F

Providing & fixing of wire mesh fencing around the T/F plinth made of M.S. Angle etc.

Construction of T/F plinth 2*2*1.2 Mtr. Height 1:2:4 in foundation brick work in 1:6 cement, sand mortar filling by and E&B and cc 1:2:4 in top of plinth and plastering of plinth 1:4 cement in all respect.

Toe Wall for fixing of fencing

Supply and fixing of chemical earthing rod

Back cartage of 100 KVA T/F and etc. from work site to store

Reconnection of 1 Phase legal consumer

Reconnection of 3 Phase legal consumer

Supply of following material:

Stay Clamp for PCC Pole

Nut & Bolt

M.S. Clamp with nut bolt for fixing L.T. Distribution Box

M.S. Clamp with nut bolt Suspension Clamp

M.S. Clamp with nut bolt Dead End Clamp

3 Phase L.T. Distribution Box

Shear Head Type Piercing Connector contact tech for jumpering line to line tapping 120 sq.mm.

Shear Head Type Piercing Connector contact tech for jumpering line to DB tapping 120 sq.mm.

Dead End Clamp with I-Hook

Suspension Clamp with I-Hook

L.T. PG Clamp 95 sq.mm. to 25 sq.mm.

L.T. PG Clamp 95 sq.mm. to 95 sq.mm.

All. Lug 120 sq.mm. for L.T. Bushing

All. Lug 240 sq.mm. for L.T. Bushing

Holding Clamp

Stone Pad

Vision Electricals