Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 2 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 3 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 4 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 5 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
Refer Docs
Closing Date
4 Mar 2021, 4:00 pmClosed
Executive Engineer R and B Division ganderbal
Executive Engineer R and B Division ganderbal
Remodeling/Renovation and Repairs to Additional Accommodation of (RandB) Divisional Office Building at Mini Secretariat Ganderbal (Part-B)
2021_PWDJK_118347_1
NIT NO.189/2020-21
Open Tender
Civil Works
Item Rate
30 days
Ganderbal
As per NIT
5 documents required · 5 mandatory
₹600
Yes
Executive Engineer RnB Division Ganderbal
Exempted
4 Mar 2021
27 Feb 2021
4 Mar 2021
27 Feb 2021
4 Mar 2021
27 Feb 2021
Amount
Brick work with F.P.S bricks of class designation 75 in cement mortar 1:6 (1 cement: 6 coarse sand). up-to floor V level including cost and carriage of all the materials invovled.
12mm thick cement sand plaster in 1:4 mix (1 cement: 4 coarse sand). incl. leads lifts and all carriage complete.
Demolishing/Dismantling carefully of R.CC work in slab avg. thickness 150mm manually/by mechanically means including stacking of serviceable materials and disposal of unserviceable material beyond Muncipal limits as per the directions of Engineer Incharge.
Centering and shuttering incld. strutting ,propping etc. and removal of form work for Foundations, sidesfootings, Lintels, Beams, landing,Stairs etc, complete
P/L, in position reinforced cement concrete of specified grade upto Floor V-Level excluding the cost of centering & shuttering. in 1:1.5:3 (1cement: 1.5 coarse sand: 3 graded stone aggregate of 20 mm Nominal size Crushed in Lintels, Beams, Stair, Landing suspended floors, etc all inclusive leads, lifts, loading, un-loading, cost and carriage of materials from approved nearest sources to site of work complete.
Reinforcement for R.C.C work incld straightening, cutting, bending, placing in position and binding all complete:- (Thermo Mechanically Treated Bars.).
Providing and applying upto 5mm thick plaster of Paris of approved brand and manufacture over the wall, ceiling, columns, beams, edges, corners etc. surfaces including scoff holding charges, with cost & carriage of materials complete.
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs of with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately (Superior quality imported Wood).
Providing and Fixing 35 mm thick panelled or panelled and glazed shutters for windows and clerestory windows including IS Marked M.S pressed butt hinges bright finished of required size with necessary screws excluding paneling all complete (Superior quality imported Wood).
Providing and Fixing 35 mm thick panelled shutters for doors including IS Marked M.S pressed butt hinges bright finished of required size with necessary screws Incl. paneling all complete (Superior quality imported Wood).
Providing and fixing of 12mm thick ply wood for ceiling of standard quality incl. frame work of Budloo wood and cost of Cornice and beading complete.
Providing and fixing of Glass Wool insulation 20-40mm thickness over 12mm thick ply wood ceiling of superior quality including all leads, lifts, carraige etc complete.
Providing and fixing of ready made T&G wooden ready made Ceiling of approved quality 12mm thick incl. all necessary fittings incl. applying touch wood Two or more coats and carriages etc complete Pattern and Design to be approved by the Engineer Incharge (Superior quality imported Wood).
Providing and fixing of stainless steel railing of required size, section and pattern including fixing of blusters on each step of tread and nevel posts and horizental tubes of required section minimum with two strands at required spacing complete in all respects incl. Main front vertical post (design to approved by Engineer incharge).
Providing and fixing of aluminuim hardware fittings for doors, windows of approved brand of required colour shade and patern with necessary nails, screws etc. complete.
L-Drops 250mm
Tower Bolts 100mm
Handles 100mm
Handles 150mm
I-Hooks
Door Stoppers
Magnetic Catcher
Providing 40x5mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1 cement :3 coarse sand :6 graded stone aggregate 20mm nominal size.)
Providing and fixing 3.5mm thick glass panes glazed windows, clestory windows including wooden beading of required size and section with necessary nails etc. complete.
Providing and fixing 8mm thick glass panes glazed windows, clestory windows including wooden beading of required size and section with necessary nails etc. complete.
IRSHAD AHMAD PARRAY
IMTIYAZ AHMAD GANAYEE
TARIQ AHMAD SOFI
SYED MOHAMMAD SHAFI
stage.html
html • 0.02 MB
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .