Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.6 LAccepted-AOC | ₹4.6 L | L1 | Accepted-AOC L1 |
| 2 | L2₹4.8 L+₹18,725.09 (4.10%)Rejected-AOC | ₹4.8 L+₹18,725.09 (4.10%) | L2 | Rejected-AOC L2 |
| 3 | L3₹4.8 L+₹25,422.87 (5.57%)Rejected-AOC | ₹4.8 L+₹25,422.87 (5.57%) | L3 | Rejected-AOC L3 |
| Sl No | Description | Qty | Unit | Abdul Sathar L2 | Abdul Basheer.NC L3 | UDAYAKUMAR M M L1 |
|---|---|---|---|---|---|---|
| 1.00Mini MCF | ||||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 0.54 | cum | 336.3 ₹181.6 | 341.01 ₹184.15 | 323 ₹174.42 Lowest |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.54 | cum | 8,635.6 ₹4,663.22 | 8,755.7 ₹4,728.08 | 8,294 ₹4,478.76 Lowest |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 1,930.27 | kg | 181.6 ₹3,50,536.49 | 184.17 ₹3,55,497.27 | 174.45 ₹3,36,735.08 Lowest |
| 1.00 | OD510098/2025-2026:Providing and fixing Aluminium powder coated profile sheet ( size, shape and pitch of corrugation as approved by engineer incharge) 0.40 mm ( + 0.05%) . Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 m as directed by Engineer incharge. The sheet shall be fixed using self drilling/ self tapping screws of size ( 5.5 x 55 mm ) with EPDM seal complete up to any pitch in horizontal/vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required | 58.09 | per sqm | 656.25 ₹38,121.56 | 665.41 ₹38,653.67 | 630.3 ₹36,614.13 Lowest |
| 1.00 | OD510097/2025-2026:Providing and fixing aluminium sheet roofing accessories 0.40mm (+0.05%) and polyester top coat 15 -
18 microns using self drilling/ self tapping screws complete Ridge plain (500 - 600 mm) | 18.5 | metre | 668.95 ₹12,375.58 | 678.27 ₹12,548 | 642.45 ₹11,885.33 Lowest |
| 1.01 | 13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work | 292.44 | sqm | 236.5 ₹69,163.01 | 239.8 ₹70,128.07 | 227.15 ₹66,428.65 Lowest |
Tender Value
₹5.1 L
EMD Value
₹12,704
Closing Date
17 Mar 2026, 4:00 pmClosed
Assistant Engineer LSGD(EW) Section Sreekrishnapur
O/o Assistant Engineer LSGD(EW) Section Sreekrishnapuram Grama Panchayath
Mini MCF Sreekrishnapuram GP
2026_LSGD_844813_1
TR/16701/2026_5_1_1/1
Open Tender
Civil Works - Others
Item Rate
Sreekrishnapuram
Please refer Tender documents.
9 documents required · 9 mandatory
₹1,120
Yes
₹12,704
Yes
2 Jul 2026
7 Mar 2026
19 Mar 2026
7 Mar 2026
17 Mar 2026
7 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Mini MCF | |||||
| 1.001 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | - | cum | - | - |
| 1.002 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | - | cum | - | - |
| 1.003 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 0.8 | kg | - | - |
| 1.004 | OD510098/2025-2026:Providing and fixing Aluminium powder coated profile sheet ( size, shape and pitch of corrugation as approved by engineer incharge) 0.40 mm ( + 0.05%) . Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 m as directed by Engineer incharge. The sheet shall be fixed using self drilling/ self tapping screws of size ( 5.5 x 55 mm ) with EPDM seal complete up to any pitch in horizontal/vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required | - | per sqm | - | - |
| 1.005 | OD510097/2025-2026:Providing and fixing aluminium sheet roofing accessories 0.40mm (+0.05%) and polyester top coat 15 -
18 microns using self drilling/ self tapping screws complete Ridge plain (500 - 600 mm) | - | metre | - | - |
| 1.006 | 13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work | 0.6 | sqm | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1426426.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.04 MB
BOQ_1426426.xls
BOQ • 0.30 MB
viewsbd.pdf
Tender Documents • 2.38 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .