Setting up of Centre for Skill Development Courses and Career Planning at Thavakkara Campus of Kannur University under PM-USHA Scheme

Amount

Civil Work- General

Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

Dismantling C.I/Asbestos/pvc pipes exposed on wall, manually / by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer - in- Charge:Up to 150 mm diameter

Dismantling of all types of toilet fittings in a single toilet, (C.I. / PVC/ Vitrous China) including stacking of useful materials near the site and disposal of unserviceable materials.

Dismantling PVC door inculding stacking useful materials near the site and disposal of un serviceable materials

Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge.

Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc.

12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour.One coat

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with Zinc coating of 120 gms/ (both side inclusive), consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG),plaster board conforming to IS : 2095 : (part 3) 1996 (Board with BIS Certification marks)

Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.With 15 mm thick tegular edged light weight calcium silicate false ceiling tiles.

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately)

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS: 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors including cost of cutting floors, embeding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer -in- Charge.With stainless steel cover plate minimum 1.25 mm thickness

Providing and fixing 3M Fasara frosted etching film of thickness 25 microns self- adhesive of approved colour, shade, and quality with cutting as per approved design and pattern, including cleaning of glass and making surface smooth for fixing of film to the surface, all completed as per the direction of the engineer in charge.

Providing and fixing of glass door SS Patch Lock with out handle in toughened glass door including all necessary screws etc. complete

Providing and fixing SS H handle having min 30cm length in toughed glass door including all necessary screws etc. complete

Providing and fixing 12 mm thick frameless toughened glass partition of approved brand and manufacture, including top &amp; bottom fixing arrangement and making necessary holes etc. for fixing required fittings, all complete as per direction of Engineer-in-charge

Cleaning existing floor tile/Wall tile in neat and shiny by using stain remover /chemicals and clean water with due care and precaution, by mechanical / manual means ( using a rag or chamois-type mop rather than sponge mop), including preparing and cleaning the surface for re-pointing/refilling of joints, including disposal of rubbish to the dumping ground all complete.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer,in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

Providing and fixing of Stylam & Cuboid make toilet cubicles of the following dimensions. Depth & 1500mm, Width &ndash; 1200mm, Height &ndash; 1980 - 2000mm which includes door size of 600mm width x 1830mm height, made up of thermosetting resin treated high pressure, self supporting decorative compact laminate with permanently incorporated anti-bacterial agent during manufacturing. Compact board shall be resistance to water immersion through permissible increase on weight 0.60-0.80% and board density 1.40kg/cm3 and manufactured as per EN 438 & IS 2046 standard. 12mm thick compact board should be Moisture resistance, Impact resistance, Termite resistance, Scratch resistance, Weather and climatic shock resistance. Finish of the compact laminate should be of suede finish , which includes door, pilasters &amp; intermediate panels, finished with approved texture/shades as per IS 2046 and fulfil the criteria of fire retardant under BS1D0 standard. Pilaster to be supported with SS (grade 316) adjustable foot and the immediate panel will be attached to the wall with the help of SS (grade 304) U channels made up of Stainless Steel as per manufacturers specification. This also includes providing &amp; fixing in position necessary hardware made-up of Stainless steel(grade & 304) as per manufacturers specification &amp; architects instruction like (1) Door Knob .( 2) Gravity Hinges (3)Thumb turn lockset with occupancy indicators (4)Coat Hook with Door stopper (5) U Channels of size 21mmx16.4mmx0.8mm , (6) Adjustable Legs/Pedestals ( SS grade- 316) (7) Rectangle type SS top rail 55mmx42mm which will get fixed with Mid and end pilaster. All the screws shall be SS (grade 304). All the pilasters are supported by SS (Grade -316) adjustable foot. The base of the stainless adjustable foot will be anchored to the floor with a clearance height up to 100-150mm. The colour, Shade, finish of the Toilet cubicles should be approved by the architect/ Engineer &ndash;in-charge.

Plumbing work

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid

Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.

Providing and fixing ceramic urinal partitions of standard size as per direction of Engineer-in Charge and of approved shade

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore

Supplying and fixing CP Towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in- charge.

Providing and fixing uplasticised PVC connection pipe with brass unions: 30 cm length15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with C.P. brass screws and washers complete.

Providing and fixing SS grating of approved quality and colour. Rectangular type with openable lid150 mm nominal size square 100 mm diameter of the inner hinged grating.

Supplying and fixing PVC Floor Trap 100mmx75mm size without Jali including cutting open, boring through RCC slabs and making good the damages.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall32 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall40 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall50 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.25 mm nominal outer dia pipes

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10 Kfg/cm - Internal work- Exposed on wall

Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall

Providing and fixing PVC pipes, including all fittings like bent, tee, elbow, collar, etc., is complete for the jointing of pipes. This includes jointing of pipes with one-step PVC solvent cement and testing of joints as per direction of Engineer-in-Charge 110 m dia, 4 kg/cm2; external work; exposed to the wall

Providing and fixing PVC pipes including all fitting like bent,tee,elbow, collar etc fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes &amp; fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall

Aluminium work

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Single rubber stopper

Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:300x10 mm

Furniture

Modular ergonomic Computer table: Providing and fixing unit wise modular type Computer Table of 900mm(L) x 600mm(W) x 750mm(H), all frames made with powder coated CRCA steel tubes of size 40X40X2mm and vertical leg supports at 900mm centre to centre with level adjusting screws and horizontal supports at 500mm centre to centre on both direction and top fixed with 25 mm thick Pre-Laminated MDF Board, CPU Rack in from Leg support. Cable Grommets and 8 Module Supply Box with min 2 nos universal type power socket, 2 data points on table top including divided power and control cable &amp; wire ways from end to end should be provided. Front and sides vertical cover panel with powder coated perforated steel sheet of thick 1.2mm in all vertical leg supports. Key board tray with telescopic slides (nylon roller slides) of size 600mm x 350 mm made out of 18mm thick pre laminated MDF board and PVC edge beading on all edges of workstation. 450mm height 10mm thick edge moulded frosted toughened glass to be provided on end sides of workstation. 450mm height fabric cover magnetic friendly back side with 12mm MDF board on tabletop with necessary fittings. To be executed as per approved design of engineer in charge.

Revolving Chair: Medium back ergonomic chair with five nos. star shaped Nylon base. Castor: 50mm diameter nylon twin wheel, gas lift height adjustment, back angle adjustment , Fixed armrest providing natural resting for arms. Seat with PU coated foam backed fabric, back rest with mesh type fabric, upholstery: Heavy duty rubber backed fabric in BLACK

Providing and fixing Over Head Shelves with 18mm thick Pre-laminated medium density fibre board with 4.0mm Sliding glass with necessary locks and railings. Shelves Size shall 90cm Height and 100cm Depth with necessary supports with Hollow Tubes covered with matching 12mm MDF board. Pre-laminated with decorative lamination on both side exterior for medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked, to backing or studding with screws etc. complete. (Elevation Area to be measured)

Executive Chair: Medium back ergonomic chair with five nos. star shaped Nylon base. Castor: 50mm diameter nylon twin wheel, gas lift height adjustment, back angle adjustment , Fixed armrest providing natural resting for arms. Seat with PU coated foam backed fabric, back rest with mesh type fabric, upholstery: Heavy duty rubber backed fabric in BLACK

Office Chair: Non-revolving executive chair with fixed armrest providing natural resting for arms. Seat with PU cutted foam backed fabric, back rest with mesh type fabric, Upholstery: Heavy duty rubber backed fabric in BLACK ( Size -55x60 cm)

Training Chair: Supply of training chair with tapering back profile ,ample lower back support and gives freedom for arm movement the seat and back are made from injection moulded plastic engineered to perfection offering rigidity for performance and enough flexibility for comfort. Fame made of mild steel with adjustable and Non Lipped Desklet material made of prelaminated particle board with sturdy wire basket to store your belongings.

Cabinet/Wardrobe: Providing and fixing Cabinet/Wardrobe unit with 18 mm thick Multi wood board with one side decorative and other side balancing lamination. cupboard shutters edge to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickel plated bright finishing M.S. piano hinges conforming to IS:3818 marked with fixing chromium plated brass 50 mm cupboard or wardrobe knobs, special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. Depth of shelves to be 300-600mm and shelves to be fix with proper support and bracket holders. as per layout drawing approved by Engineer in charge. Make laminate: Greenlam/ Merino / Century. Only front elevation will be measured.

3 seater Sofa for visitors: - Supply and placing finished 3 seater sofa with Fabric of approved shade & pattern, supported on wooden/ metal legs and frame. Contemporary design of elegance and comfortable, Covered with top-quality Imported faux leatherette/Fabric upholstery as per approved colour/patterns. Sponge: high quality polymeric urethane foam 40 minimum density as the difference part, seat and back. Spring: imported spring for strong support. Minimum dimension-one sofa W x H x D: 210 cm x80cm x 75cm etc. Complete as per the direction of Engineer-in- charge.

Supply and erection of Airport type 3 seater waiting chair with powder coated chromium finish having minimum dimensions 1675mm length X 710mm width X 775mm total height and 400mm seat height . Seat: High quality cold rolled 1.2mm thick steel perforated sheet pressed and welded to form the shape. Arm & Leg: High quality 1.2mm thick MS Tube / Sheet . Cross bar: High quality cold rolled 2mm thick steel sheet pressed and welded to form the shape.

Providing &amp; supply of Conference Table with executive chair of 8 Pax with the following specifications. Table top size :3000 x 1000mm. Table Tops &ndash;made of 25mm thick MDF with waterfall top edges finished in PVC Membrane using unique wrap around technology for better aesthetics &amp; long lasting use. Under structure &ndash; Legs made of 25 mm thick standard Black matt color post formed panels interconnected with 18mm thick standard Black matt color pre-laminated modesty panels, with height adjustable levelers to take care of uneven floors. Wire Management &ndash; Concealed wire management to take care of basic wiring requirements both horizontally &amp; vertically. For closed configurations, lifetable top cover, made of 12mm MDF finished in PVC Membrane, is provided to access the horizontal wire carrier. Vertical wire management is through flexible vertical wire manager. Designed for Flexibility through modular Construction, PVC Membrane Finish Tops for seamless surface, Post formed Legs for safe use, Provision for easy wire management, Upgradeable / reconfigurable for future needs. 15 Nos Revolving adjustable type Medium height Back Office Chair with arm rest with back tilt and swivel mechanism constructed out of mild steel and high quality plastic.

L TYPE WORKSTATION WITH MODULAR PEDESTAL STORAGE UNIT (1350+900)+*(600+450)*750 mm : TABLE TOP Made of minimum 18mm BWR ISI (303 Grade) plywood (Century, Greenply, Fineply or equivalent). On top and all sides with 1mm thick hot press (3M or Henkel) laminates (Brand MERINO, Associates or equivalent) of approved colour and pattern as per the design. Table top shall be provided with 2mm thick edge band Underside: MS Unique Leg Trapezoidal cross section of size 60mm x 50mm x 20mm is made of 1.6mm thick CRCA Powder Coated. Horizontal Beams Below Table Top will be with 50mm x 25mm Rectangular Tube made of 1.6mm thick CRCA Powder coated. Flip Cover and Cable Management Tray Considered, includes three drawer modular pedestal unit ( min width 450mm,depth 500 mm, height 650) with channel handles ,hinges, lock all complete as per approved design of engineer in charge/Architect

Supply and fixing high quality lacquer writing board of minimum thickness 6mm

Zebra Blinds: Providing and Fixing Zebra blinds for windows with approved colours as per Indian standards with following Specification Head Rail, Bottom Rail: Made of extruded aluminium powder-coated with high mechanical strength, UV-resistant, and anti-fogging polyester powders, it is expressly made for accessories to set inside IG units. Ladder tape and cords are provided with 100% polyester, excellent dimensional stability, and high mechanical &amp; UV resistance. Modular and durable chain for vertical movement.

Electrical Works

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

Erection of wall bracket / ceiling fittings of all sizes and shapes containing upto two GLS lamps per fitting, complete with all accessories including connection etc. as required.

Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light plugs to be used in non residential buildings).

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Upto 35 sq. mm (clamped with 1mm thick saddle)

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 25 sq. mm (28mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 50 sq. mm (35mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 10 sq. mm (22mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 16 sq. mm (25mm)

Providing, Fixing, Laying & Clamping at site of Copper earthing conductors inclusive of providing earthing terminations and bracing of the terminations etc. 25x3 earth bench

Supply of 4C x 50 Sq.MM armoured aluminum cables with ISI mark, including suitable double earthing as per KSEI standards, complete and made functional.

Supply of 4C x 25 Sq.MM armoured aluminum cables with ISI mark, including suitable double earthing as per KSEI standards, complete and made functional.

Supply of 3C x 16 Sq.MM armoured aluminum cables with ISI mark, including suitable double earthing as per KSEI standards, complete and made functional.

Supply of 3C x 10 Sq.MM armoured aluminum cables with ISI mark, including suitable double earthing as per KSEI standards, complete and made functional.

Supply of following Light/Fan fixtures complete with accessories. Rate shall include necessary mounting bracket, suspension chains etc. ;Aesthetically designed 34W or nearest LED cool day light flat panel for surface mounting which provides soft light and glare free symmetrical illumination 600x600x70mm size, 6500K or nearest

Supply of LED recessed Downlight with minimum 2000 Lumens Lighting output from 20w,4000K Diecast aluminum Housing, 50,000 burning hours, 130-320 Voltage Range, THD<10%, minimum 2KV Surge Protection.

Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required8 way (8+18) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43)

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.100 amps

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray cable tray with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts &amp; nuts, etc as required. 150 mm width X50 mm depth X 1.6 mm Thickness

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Supply, Installation, Testing and Commissioning of True on-line Double Conversion 10 KVA UPS system with 3:3 Crest Factor Three Phase Input Three Phase Output. Inversion shall be Microprocessor controlled with instantaneous sine wave Control using IGBT. UPS shall have standard display features, alarms, safeties, etc Input Voltage range : a) Phase - Three Phase with ground b)Votage range 190 VAC - 470 VAC c)Input Frequency :50/60 Hz d)Power Factor : 0.95 or above e)THD : less than 5% with full load Bypass f) Voltage Range - 200VAC -240 VAC ) Frequency range- 45-55 Hz/55-65 Hz Output Voltage Range h)Voltage Range- 200VAC - 240 VAC i)Frequency range- 50/60 Hz j)Voltage distortion- linear load <= 2% k)Voltage distortion - nonlinear load <= 5% l)Output waveform - pure sinewave m) Crest Factor -3:1 Minimum Back up time : Continuous 30 Minutes at full load Rectifier shall be Full wave Type (Shall fully meet the specified input power requirements) Battery Type: Sealed Lead Acid Maintenance Free DC Voltage : 96V DC System, Battery Nos and capacity shall be designed for optimum storage space. Installation & Commissioning Required Breakers also needs to be provided in input and output side for the UPS. Make: Liebert Vertiv/APC by Schneider/Numeric by Legrand

Networking

Supply, Installation, and Integration of IP PBX Switch having capacity of minimum 80 concurrent calls, 50 attendee conference, Integrated 4 PSTN Trunk FXO Ports Plus 2 FXS Ports, Highest level of security protection using SRTP, TLS and HTTPS encryption, Supports up to 500 users, 80 SIP trunk accounts, minimum 1.5GHz Quad- core processor, 1GB DDR RAM, 8GB EMMC Flash,Built-in Call Detail Records (CDR) for tracking phone usage by line, date, etc. Make: Matrix/Grandstream/Clixoo or equivalent

Supply, Installation, Testing & Commissioning of IP Reception/ Console Phone

Supply, Installation, Testing & Commissioning of IP Phone.

Supply, Installation,testing and commissioning of indoor 2MP IR IP H.265 Compact Dome camera. 1/2.9", 2.0 Megapixel,Progressive scan, CMOS. 2.8/3.6 mm Fixed Lens. Angle of View (H): 97.4 deg. IR-cut filter with auto switch (ICR).Auto/Manual, 1~1/100000 s. Auto/Manual. IR Range Up to 30M. 52dB. Digital Defog. 2D/3D DNR. DWDR.Max.Resolution: 1920x1080. Supported HLC/BLC. Up to 3 OSDs. Motion Detection. H.265+, H.265, H.264, MJPEG Video Compression. IP67. 10/100MBase-TXEthernet. With Audio.

Supply, installation, testing and Commissioning of 16 Ch Embedded Network Video Recorder with 4 HDD Bays Supports 4K Cameras, HDMI, VGA. Two-way Audio Input: 1ch, 3.5mm. IP Video Input: 16-Ch (Upgradable to 16 Channels).Incoming Bandwidth: 160Mbps. Outgoing Bandwidth: 160Mbps. HDMI Output. VGA Output. Audio Output. Compression:H.265+, H.265, H.264, MJPEG. Recording Resolution: 8MP/6MP/5MP/4MP/3MP/ 1080P. Network: 2&times;RJ45 self-adaptive 10/100/1000 Mbps network interfaces. 4 SATA interface. Up to 10TB for each HDD. 100~240V AC.support all channel Audio

Supply, Installation, Testing & Commissioning of 15U Network Rack with below specifications as minimum and all the necessary accessories Dimensions - Height - 15U 600 x 600, Fan Units with 4 Fans, PDU 6 point - 1 Nos's ;Mounting Hardware Kit (1 lot) ;Tray - Front glass doors and back steel door and side panels.

Supply, Installation, Testing and Commissioning of Wifi Access Point with superior 802.11ac performance (up to 1.2Gbps) 2 x 2 (Transmit x Receive) with 2 streams of data for 2.4 GHz (300 Mbps) and 5 GHz (1750 Mbps) of reliable data delivery 802.11ac beamforming to improve range, minimizes interference while maximizing data rates Internal antennas for maximum RF performance. including Wall / Ceiling Mount Kit for fixing access points With required licenses &amp; OEM technical support / warranty along with required accessories

Supply, Installation, Testing and Commissioning of 24 PORT POE Switch. Ports 24 x 10/100/ 1000 + 4 x gigabit SFP .Layer 2 switching, dhcp, vlan support, igmp snooping, syslog, dos attack prevention, port mirroring, diffserv, weighted round robin (WRR) queuing, broadcast storm control, ipv6, multicast storm control, unicast storm control, firmware upgradable, spanning tree protocol (STP) support, rapid spanning tree protocol RSTP) support, power AC 120/230 v (50/60 Hz) DAHUA DH PFS3228-24GT-240

Supply, Installation, Testing of CAT6 Patch/Jack Panel, 24-port, Modular, PCB based, Unshielded Twisted Pair, Category 6, TIA / EIA 568-C.2 and ISO/IEC 11801.

Patch Cable - Supply, Installation, Testing and Commissioning of CAT6 LSZH Patch Cord with molded strain relief boot & 50u" gold plated contact pins - 1 Meter etc. of approved make as required for complete installation.

Additional charging of Gas R-32 for split units

Supply and installation of outdoor stand for fixing AC outdoor units including accessories

Scaffolding work upto one floor height for installing outdoor unit

Extra lenth for control cable for the above installation if it exceeds 5 mtr per unit

Supply and fixing of 1" PVC drain pipe for indoor units

Extra length for copper refrigerant piping for the above installation if it exceeds 5 metre per unit

Supply installation testing and commissioning of Hi wall mounted inverted type 5 star split Air Conditioner with Energy efficient Compressor and wireless Remote control,Clamps for fixing condenser on wall ,Drain piping, copper pipping upto 5 metre in between evaporator and condensor units. etc complete Remote control unit to be fixed on wall. 1.0TR with 5 KVA Voltage Stabilizer having intellegent time delay,use only copper pipes in bewteen condenser unit and room unit etc complete

Supply installation testing and commissioning of Hi wall mounted inverted type 5 star split Air Conditioner with Energy efficient Compressor and wireless Remote control,Clamps for fixing condenser on wall ,Drain piping, copper pipping upto 5 metre in between evaporator and condensor units. etc complete Remote control unit to be fixed on wall. 2.0TR with 5 KVA Voltage Stabilizer having intellegent time delay,use only copper pipes in bewteen condenser unit and room unit etc complete

IT Equipment

Network Printer A4 Multi-Function B&W Ink Tank Printer Technology: Ink Tank Monochrome Type: Print, Scan, Copy Min Print Speed: 10 IPM Paper Size:A4,Legal,Envelope Feature: Auto Duplex Paper Tray Input Capacity : Min 150 sheets Duty Cycle: Max 5000 Pages per month Interface: USB 2.0 and network port Supported OS: Ubuntu 18.04 & 20.04, Windows Warranty: 3-year comprehensive onsite warranty, excluding consumables Network : WiFi, WiFi Direct, Ethernet

Desktop : Processor: Intel Core i3 12th Generation or higher Motherboard : compatible with i3 processor Memory: 16 GB DDR4 RAM Expandable up to at least 32GB Hard Disk: 512 GB SSD Monitor : 19" Wireless connectivity: WiFi adapter to be included Audio: Integrated Expansion Port: 4 USB Port (at least two number of USB 3.0 , ,10/100/1000 Ethernet Card, HDMI, Head phone/microphone combo or Separate & other Standard Features Power Supply: 230V, 50Hz AC Supply Mouse: Optical Scroll mouse Key Board Warranty: 3-year comprehensive onsite warranty Operating System: Windows 11 Home

Laptop : Processor: Intel Core i7 12th Generation or higher Memory: 16 GB DDR4 RAM Expandable up to at least 32GB Hard Disk: 512 GB SSD Display: Antiglare Full HD LED Backlit Display Display Size: 14" or higher Wireless connectivity: Integrated wireless b/g/n, Integrated Bluetooth Speaker: Integrated Stereo Speaker Keyboard: Keyboard with Touch PadCamera: Integrated HD Camera Audio: Integrated Expansion Port: 3 USB Port (at least two number of USB 3.0 and One number of Type C) ,10/100/1000 Ethernet Card, HDMI, 1Head phone/microphonee combo or eparate & other Standard features Power Supply: 230V, 50Hz AC Supply with rechargeable Battery Pack comprising of Li- Polymer battery/ Li- Ion Polymer battery Mouse: Optical Scroll mouse Carry case: Backpack Weight: Less than or equal to 1.7Kg (Weight without Charger) Warranty: 3-year comprehensive onsite warranty including battery and charger Certification: ROHS Compliance & BIS for Product Operating System: Windows 11 Home

Laptop : i5 Processor: Intel Core i5 12th Generation or higher Memory: 16 GB DDR4 RAM Expandable up to at least 32GB Hard Disk: 256 GB SSD Display: Antiglare Full HD LED Backlit Display Display Size: 14" Wireless connectivity: Integrated wireless b/g/n, Integrated Bluetooth Speaker: Integrated Stereo Speaker Keyboard: Keyboard with Touch PadCamera: Integrated HD Camera Audio: Integrated Expansion Port: 3 USB Port (at east two number of USB 3.0 and One number of Type C) ,10/100/1000 Ethernet Card, HDMI, 1Head phone/microphonee combo or Separate & ther Standard features Power Supply: 230V, 50Hz AC Supply with rechargeable Battery Pack comprising of Li-Polymer battery/ Li- Ion Polymer battery Mouse: Optical Scroll mouse Carry case: Backpack Weight: Less than or equal to 1.7Kg (Weight without Charger) Warranty: 3-year comprehensive onsite warranty including battery and charger Certification: ROHS Compliance &amp; BIS for Product Operating System: Windows 11

Headset Type: Stereo Wired OverEar Headphones Microphone: Built-in microphone for voice calls and voice commands Connectivity: USB connection for easy plugand- play setup Compatibility: Compatible with PC, Mac, and Laptop devices Warranty: 2-year warranty Cord length > 1.5 meter