Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.4 LAccepted-AOC HARINBARI SAGAR SOUTH 24 PARGANAS PIN CODE 743373 | 24 PARAGANAS SOUTH | WEST BENGAL | 743373 | ₹9.4 L | L1 | Accepted-AOC LOWEST BIDDER L1 |
| 2 | L2₹9.4 LRejected-AOC NAZRUL SARANI BALURGHAT DAKSHIN DINAJPUR | DINAJPUR DAKSHIN | WEST BENGAL | 733101 | ₹9.4 L | L2 | Rejected-AOC NOT LOWEST BIDDER L1 |
| 3 | L3₹9.4 LRejected-AOC P W D PARA GANGARAMPUR DAKSHIN DINAJPUR | DINAJPUR DAKSHIN | WEST BENGAL | 733101 | ₹9.4 L | L3 | Rejected-AOC NOT LOWEST BIDDER L1 |
Tender Value
₹9.4 L
EMD Value
₹18,900
Closing Date
6 Feb 2026, 12:00 pmClosed
Executive Engineer (A.M), Balurghat A.M Division
Executive Engineer (A.M), Balurghat A.M Division, Balurghat, Dakshin Dinajpur
Jungle Cutting and Cleaning Compound Premises, Fencig Wall and Lighting Arrangement at the Office under Balurghat-II (Agri-Mech) Sub-Division under Balurghat A.M Division
2026_WRDD_992030_3
WRDD/EEAM/BLG/NP/NIT NO.- 15/2025-26
Open Tender
CIVIL WORKS
45 days
Dakshin Dinajpur
Refer Tender Documents
4 documents required · 4 mandatory
₹18,900
Yes
16 Feb 2026
21 Jan 2026
9 Feb 2026
21 Jan 2026
6 Feb 2026
21 Jan 2026
Clearing compound premises of shurbs, plants, jungles etc. by cutting and removing as directed (Specific permission of Engineerin-Charge prior to execution will be necessary). (Payment to be made on area cleared)
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm.
Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes. a) Pakur Variety.
M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erectionall complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. I) For structural members of specified sections weighing less than 22.5 Kg./m.
Supplying, fitting, fixing, Chain link fencing of approved quality with R.C.C posts wooden posts or iron posts by means of galvanised "C" clips to grid of horizontal strands of galvanised high tensile spring steel wire of 12 S.W.G which have to be tensioned and fixed to the vertical posts by means of galvanised special clips, bolts and nuts etc. (II) 65 mm. x 65 mm. x 8 g.
(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white)
Painting with superior quality aluminium paint of approved make and brand including smoothening surface by sand papering etc. on steel surface : b) Two coats
Supply & Delivery of 9.0 mtr long sweged and welded steel stubular poles as per IS- 2713-1980 (410-SP-29) approx. weight 125 Kg having following diamensions, Bottom- 139.7mm dia. X 5.0mm thick X 5m long, Middle- 114.3mm dia. X3.65mm thick X 2.0m long, Top- 88.9mm dia X 3.25mm thick X 2.0m long incl. pole base ( Make- Subham Pole / Utkarsh/Bansal /Calcutta poles & Tubes).
Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC 4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly. (a ) Upto 9.0 mtr. Size 0.6x0.6x1.70 mts.
S & F 240V LED Outdoor luminaries having Pressure dia cast aluminum housing. Heat resistant glass. IP65 protection and uniform distribution with suitable clamping arrangement incl necessary interconnection as per direction of EIC. (Non Schedule) i) BVP 102 LED 30 CW FG GR PSU with SDP (Philips).
Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint.
Distribution wiring for streel light on pole for outdoor fluorescent/SV/MV light fitting with 2x1/1.40 PVC insulated and sheathed wire (single core) in 15 mm dia GI Pipe (ISI-Medium), without control switch, incl. fitting and fixing the light fitting by providing 32 mm dia GI Pipe bracket of lengh 1.05 mts, on pole incl. S&F sutable MS flat clamps with bolts, nuts etc. as required and painting.
2.5 sqmm'FR' stranded Copper Wire
Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.
Supplying and fixing Sheet steel Main Switches on flat iron frame on wall. 32 A 240V DP with fuse on L&N (Make : Havells).
Supply & Fixing 240 V 6 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.
GST @18% on item no. 1 to 19
Labour welfare cess @ 1% on item no. 1 to 20
Please Enable Macros to View BoQ information
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 8.42 MB
Tendernotice_2.pdf
PDF • 0.51 MB
BOQ_2425662.xls
BOQ • 0.37 MB
Download all tender documents and submit your bid