SCTL- PROVIDING AMENITIES AND DEVELOPMENT OF BLIND SCHOOL IN THIRUVANANTHAPURAM

Amount

CIVIL WORK

15.60 : Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved

15.2.2 : Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 leaner mix ( including equivalent design mix)

2.1.1 : Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil

15.56 : Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

13.26 : Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.46.1 : Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

13.48.1 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm

13.48.2 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture

13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

15.23.2 : Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles above 25 mm and up to 40 mm

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

od368969/2023_2024 : Flooring with Anti Skid Flooring tiles of approved colour, quality, make and size laid over a bed of 20 mm thick cement mortar 1:4 ratio, adding necessary pure cement grout for the proper binding of the tiles to mortar including pointing the joints with tile joint filler of "Roff" or "Fosroc" make as per manufacturers specification to match in colour with the tiles including curing, finishing, etc. complete .

16.90 : Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

12.45.1 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1

11.3.1 : Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate)finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate

11.37 : Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

10.16.2 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes

12.50 : Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

9.119 : Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door fame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer-in Charge.

9.120.1 : Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and sized of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of whicj 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5mm thick, 95 mm wide PVC sheet out of which75 mm shall be tapered in 45 degree on th inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mmx2) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded /sealed to the styles & rails with 7 mm (5 mm + 2 mm ) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer -in-charge, manufacture's specification & drawing.30 mm thick plain PVC door shutters

25.6 : Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc., all complete for the required performance as specified, as per the architectural drawings, as per the approved shop drawings, as specified, and as directed by the Engineer- in - Charge. For payment, only the actual area of glass on face # 1 of the glass panels (but excluding the area of grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (Payment for fixing of Spandrel Glass panels in the curtain glazing is included in cost of relevent item*). (ii) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face #2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35%, Light reflection internal 10 to 15%, light reflection external 10 to 20%, shading coefficient (0.25 - 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.

25.7 : Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Alumini um sheets (each0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

24.2 : Providing and fixing double scaffolding system (Cup lock type ) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube chakkus, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and / or pointing and / or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-Charge. Note: - ( 1) The evaluational area of the scaffolding shall be measured for payment purpose, (2) The payment will be made once only for execution of all items of such works.

od368970/2023_2024 : Providing, erecting, maintaining, and removing temporary protective screens made out of specified fabric with all necessary fixing arrangements to ensure that remain in position for the work duration as required by the engineer in charge.

od371735/2023_2024 : Providing and fixing hard drawn steel wire fabric fencing of required width in mesh size 25x25 mm including wire or nuts, bolts, and washers as required complete as per the direction of Engineer-in-charge.

11.4 : 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete

51.13.21.1 : Water proof plastering with Cement Mortar 1:4 (1 cement : 4 fine sand) 12mm thick plaster finished with a floating coat of neat cement mixed with water proofing compound of approved make @ 2kg/m2 of mix floated hard and troweled smooth including all labour, material, conveyance charges etc complete.

10.28 : Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

10.26.3 : Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.G.I. pipes

9.147D.5 : Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Three track three panels sliding window made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 +/- 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm)

od3324/2024_2025 : Providing and fixing of vertical/roller blinds width 100 mm regular quantity made from 100 % polyester/Fibre yarn coated with fade resistant polymer to ensure complete opaquely with zero light transmittance, having suitable coating on exterior, including all fixtures and fittings complete in all respect as per design and instruction of Engineer in-charge and as per site conditions. The colour will be approved by the competent authority and inclusive of all labour charges.

21.3.1 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness

15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

15.13.2 : Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area beyond 3 sq. metres

14.75 : Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge.

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

7.2.1 : Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like.Cement mortar 1:6 (1 cement : 6 coarse sand)

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

50.6.2.2 : Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15⁰ landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).

13.8.2 : 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix:1: 4 ( 1 cement : 4 fine sand)

21.1.2.3 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micorn)

21.2.2 : Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides

od371205/2023_2024 : Supplying and Fixing pressed steel door of standard pattern with frame as per profile of IS 4351 of section 105x60 mm using 18G (1.2mm thick CRCA ) sheet and shutters made of section 75x30 cm of outer styles and horizontal members and then put with enclose and stiffened sheet 26 CR as per the direction of engineer in charge

9.83 : Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

21.12.2 : Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0mm thick & 2100 mm long with S.S. screws etc. complete as per direction of Engineer -in-Charge.Powder coated minimum thickness 50 micron aluminium tubular handle bar

21.13 : Providing and fixing 100 mm brass locks ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete

9.70.2 : Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete:100x58x1.90 mm

9.74.3 : Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:150x10 mm

16.91.2 : Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

od370562/2023_2024 : Providing and fixing in position of Wall Mount Bracket for IFPD 75" etc to complete as per the direction of engineer in charge.

od370563/2023_2024 : Supply and installation of Open Pluggable System (OPS-PC) i5 8GB /256GB SSD (Make: Promethean, Wisdomatic or equivalent)

od370566/2023_2024 : Supply, Installation and Commissioning of Software attached Interactive Flat Panel Display - 75" 8GB RAM/128GB ROM with Android 13.0 (Make: Promethean, Wisdomatic or equivalent)

od370581/2023_2024 : Supply and fixing of uninterruptible power supply (1KVA UPS with Built in battery)

od370582/2023_2024 : Supply and Installation Audio System with Wirless Microphone

od372158/2023_2024 : Supplying and Installation of Cupboard with Shelving unit, using 17 mm Pre-lam particle board with 4mm plane glasses and other accessories including all fittings, all materials, all conveyance, etc complete as per the direction of the engineer-in-charge.

od380889/2023_2024 : Supplying and installation of 2mm Acrylic signage board with braillie letters by incorporating raised dots representing letters and numbers which can be easily sensed by visually impaired persons along with English alphabets etc. complete

od381009/2023_2024 : Installation and Supply of Tactile World Globe including stand with the dimension of 14.4 × 14.55 × 18.6 inch which contains raised topographical and area, major oceans, raised latitude and longitude lines, discernible, contrasting raised lines for the equator, International Date Line, Prime Meridian, Tropic of Cancer, and Tropic of Capricorn, with all continents labeled in braille including all materials, conveyance, etc complete as per the direction of engineer in charge

od381023/2023_2024 : Installation and Supply of Outdoor Percussion Freechimes Crafted with durability and safety in mind, the Duo Outdoor Xylophone is built to withstand the elements and rigorous play which is constructed from high-quality materials, including weather resistant metals and durable synthetic components which ensures years of reliable performance in outdoor environments etc complete as per the direction of engineer in charge.

od381029/2023_2024 : Installation and Supply of Outdoor Multicolor Rainbow Sambas Drum Ensemble with array of drums (5 drum per set), each bursting with vibrant colors that not only stimulate the senses but also add a playful aesthetic to outdoor spaces. It is engineered with durable and weather-resistant materials, these drums are built to withstand the rigors of outdoor environments, ensuring longevity and performance in all seasons including all materials, conveyance, etc complete as per the direction of engineer in charge.

od381035/2023_2024 : Installation and Supply of Outdoor Duet Xylophone Crafted with durability and safety in mind, the Duo Outdoor Xylophone is built to withstand the elements and rigorous play. It is constructed from high-quality materials, including weather resistant metals and durable synthetic components and it ensures years of reliable performance in outdoor environments etc complete as per the direction of engineer in charge.

od381155/2023_2024 : Supply and Installation of Kids' chair which is durable and safe with rounded edges. The PU lacquer surface makes it easy to clean so spills are not a problem. The elegant wood finish gives it a simple classic look to effort easily into any decor including all materials, conveyance, all accessories etc complete as per the direction of an engineer in charge.

od381156/2023_2024 : Supply and Installation of Kids' table which is durable and safe with rounded edges. The PU lacquer surface makes it easy to clean so spills are not a problem. The elegant wood finish gives it a simple classic look to effort easily into any decor including all materials, conveyance, all accessories etc complete as per the direction of an engineer in charge.

od1515/2024_2025 : Supplying and Installation of 4mm thick Acrylic board with Braille English Alphabets of size A3 (297 x 420 mm) etc complete as the direction of engineer in charge.

od1554/2024_2025 : Supplying and Installation of 4mm thick Acrylic board with Braille Malayalam Alphabets of size A3 (297 x 420 mm) etc complete as the direction of engineer in charge.

50.12.2.3 : Providing & fixing poly carbonate multi wall plain sheet 5 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling/ self tapping screw of size ( 5.5x55 mm) with EPDM seal complete upto any pitch in horizontal/ vertical/ curved surfaces, but excluding the cost of purlins, rafters, trusses, and including cutting to size and shapes where ever required.

2.27 : Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming consolidating and dressing complete.

od2730/2024_2025 : Providing and fixing cement moulded upto a height of 1.15 m, using 100 cm X 20 cm X 5 cm thick verticals and 50mm cement repears in all heights by fixing in cement grout with line and levels, and PU painting after applying two coats putty etc complete.

od2765/2024_2025 : Supply and fixing of Acrylic board of Tactile Braille World Map of A3 Size (297 x 420 mm) which is designed in a manner such that the illustrations can be comprehended by the visually impaired person with the help of the fingertips etc as required as per the engineer in charge

od2776/2024_2025 : Supply and fixing of Acrylic board of Tactile Braille India Map of A3 size (297 x 420 mm) which is designed in a manner such that the illustrations can be comprehended by the visually impaired person with the help of the fingertips etc as required as per the engineer in charge

od2777/2024_2025 : Supply and fixing of Acrylic board of Tactile Braille Kerala Map of A3 Size (297 x 420mm ) which is designed in a manner such that the illustrations can be comprehended by the visually impaired person with the help of the fingertips etc as required as per the engineer in charge

od3718/2024_2025 : Supply, storing and planting of Phyllostachys Aurea (golden bamboo) plants of certain heights in pots as per direction of the officer- in- charge

PLUMBING

17.2.1 : Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid

15.52 : Dismantling of flushing cistern of all types (C.I. / PVC/ Vitrous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead

17.7.8 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated levers

17.32.1 : Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Circular shape 450 mm dia

17.70.1 : Providing and fixing PTMT Bottle Trap for Wash basin and sink.Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the center of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms

17.73.1 : Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm. weighing not less than 170 gms

50.17.1.5 : Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

50.18.7.2.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with claps at 1.00 metre spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20 mm dia 12Kgf/cm2 - Internal work - Exposed on wall

50.18.7.3.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer- in- Charge 25 mm dia 12 Kgf/cm2 - Internal work - Exposed on wall

50.18.7.5.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 10 Kgf/cm2- Internal work- exposed on wall

50.18.9.9.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2

50.18.9.19.1 : Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall

18.8.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes

18.8.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.25 mm nominal outer dia pipes

18.48 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

50.18.9.1.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge 15 mm dia 12Kfg/cm2

18.53.1 : Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore

18.56.1 : Providing and fixing PTMT pillar cock of approved quality and colour.15 mm nominal bore, 107 mm long, weighing not less than 110 gms

18.51.1 : Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore

ELECTRIFICATION

1.10.1 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group A

1.10.2 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group B

1.8.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

1.11 : Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

1.14.1 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire

1.14.2 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

1.55.1 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group A

1.58 : Supplying and fixing PVC batten/ angle holder including connection etc. as required.

90.3.7 : Supplying and providing extra steel chain (16 SWG) 2 x 1.00 m long with 16/0.20 mm 3 core copper conductor flex wire conforming to relevant ISS or with the extended original wiring and giving connection etc. as required.

od370282/2023_2024 : Supply & Installation of 36 W LED square 600x600mm size light fittings including driver,frame, with epoxy powder coated body. working on 230V AC Supply.

90.3.12 : Conveyance and fixing charges of recess mounting down light fittings of all types complete with all accessories in the existing opening of false ceiling, giving connections with the existing wire etc., as required.

90.3.19.3 : Supply conveyance, installation, testing and commissioning the light fittings of following types made from CRCA sheet 0.5mm thickness with all accessories and lamps directly on wall and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required1200 mm 1X20W LED Lamp with box type fixture

90.15.4.1 : Supply Conveyance, installation, testing and commissioning of 20W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

90.5.1.3 : Supply and fixing the following types of superior quality 250V A.C call bell on existing M.S. box and giving connections with required length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and PVC sheathed round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, earthing the MS box and making good the surface as required.Ding dong bell

90.5.1.4 : Supply and fixing the following types of superior quality 250V A.C call bell on existing M.S. box and giving connections with required length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and PVC sheathed round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, earthing the MS box and making good the surface as required.Musical bell with bird sound

90.5.1.6 : Supply and fixing the following types of superior quality 250V A.C call bell on existing M.S. box and giving connections with required length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and PVC sheathed round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, earthing the MS box and making good the surface as required.Gong bell 75mm-without MS box

1.22.5 : Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.180 mm X 100 mm X 60 mm deep

90.4.1 : Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required.

1.25 : Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

1.47 : Supplying and fixing extra down rod of 10 cm length G.I. pipe, 15 mm dia, heavy gauge including painting etc. as required. (Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)

90.4.5.2 : Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.1200mm sweep -5star rated ceiling fan complete with 300mm down rod , canopies, shackles and blades working on 230V/240V single phase A/C

1.17.3 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

1.17.11 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 2.5 sq. mm

1.17.12 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm

1.17.22 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 4 sq. mm

1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.4 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

1.26 : Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

90.12.1.28 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).3.5 core 35 sq mm

1.27.2 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)

1.59 : Dismantling of ceiling fan and painting the same with with one or more coats of spray painting with synthetic enamel paint of approved brand and manufacture to give an even shade, including cleaning of surface with detergent and replacing the damaged rubber reel, nuts and bolts with washers and safety pins reinstalling the same as required.

90.11.1.10 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - three phase double cover (IP 42/43)

90.11.1.19 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8 + 18) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43)

90.11.1.14 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43)

90.16.1.1 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.00 mm copper conductor ( 14 SWG)

90.16.1.2 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)

90.16.5.1 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.00 mm (14 SWG)

90.16.5.2 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)

2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.10.4 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole

90.14.10.3 : Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16 A-100A, 16 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL

2.11 : Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

2.12.1 : Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.13.1 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.13.2 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

2.14.1 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps

2.15.3 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

2.15.2 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.1.2 : Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 Amp TP & N

90.12.7.28 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 35 sq mm with factory made clamp

9.1.20 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X25 sq.mm (28mm)

9.1.21 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm)

1.17.13 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 2.5 sq. mm

1.17.20 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 4 sq. mm

1.17.21 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm

1.17.24 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 4 sq. mm

1.17.31 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 6 sq. mm

1.27.5 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm)

90.10.1.2 : Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )2 module moulded plastic box on surface

90.10.1.3 : Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )3 module moulded plastic box on surface

90.10.3.15 : Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )32A DP switch with indicator

90.10.3.32 : Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )25A 3 pin plug top with indicator

90.10.3.33 : Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )25A 3pin Shuttered socket

od370325/2023_2024 : Supplying and fixing of 20mm sizes of Flexible conduit along with accessoriesin surface/recess including cutting the wall and making good the same in case ofrecessed conduit as required.

od370387/2023_2024 : Supply and Installation 3 Star Two ton Inverter Split AC Make Voltas, Samsung, or equivalent

od371776/2023_2024 : Supply and installation of wired computer keyboard with Integrated Multimedia Keys, Minimalist Design, Compatible with Laptop/Desktop including all materials, conveyance, etc as per the direction of engineer -in- charge. Make: Dell, Philips, HO/ equivalent

od372069/2023_2024 : Supply and installation of wired computer mouse with Integrated Multimedia Keys, Minimalist Design, Compatible with Laptop/Desktop including all materials, conveyance, etc as per the direction of engineer -in- charge. Make: Dell, Philips, HO/ equivalent

od371920/2023_2024 : Supply and fixing D-Link 5 port desktop switch 10/100 Mbps, Model - DES-1005c Network switch and giving connections as required

od371921/2023_2024 : Supplying and drawn of UTP 4 pair CAT 6 outdoor cable, outer jacket material- PVC+HDPE as required 1 run of Cable

od371922/2023_2024 : Supply and installation of WIFI Extender of Model-DAP-1325,802.11n,802.11g wireless rate up to 300mbps of Dlink/TPlink or equivalent

od371923/2023_2024 : Supplying and installation of micro SD card 128gb of SanDisk ultra/Samsung/hp or equivalent

od371924/2023_2024 : Supplying and fixing Tenda Access point of Model -AC 10, MU-MIMO Dual band Gigabit WIFI router,IEEE802.11a/b/g/n/ac wireless rate-2,4GHZ up to 300 Mbps+ 5GHZ up to 867Mbps including installation etc. as required.

od372174/2023_2024 : Providing 3 phase digital Ammeter which covers a wide range of digital ammeter measurements including all materials, fittings, conveyance and all other accessories, etc as per the direction of engineer in charge.

od372166/2023_2024 : Providing 3 phase digital Voltmeter which covers a wide range of digital ammeter measurements including all materials, fittings, conveyance and all other accessories, etc as per the direction of engineer in charge.

od372173/2023_2024 : Providing Current Transformer (CT) 150/5 which is housed in a protective casing made of high-quality insulating materials to ensure safety and reliability including all materials, fittings, conveyance and all other accessories, etc as per the direction of engineer in charge. Make: L&T/ TAMCO/ equivalent.

1.33 : Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

1.24.8 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Bell push

od380847/2023_2024 : Supplying Automatic Electric Wheelchair typically powered by rechargeable lithium-ion 24 V, 13AH batteries with a maximum lifting height of 3 inches from the ground and a maximum load capacity of 100 kgs including all accessories, etc. as required.

od381153/2023_2024 : Supply, installation, testing, commissioning of Passenger elevator/ Lift with 1 no. of unit having 10 person capacity and 680kg load with the speed of 1 m/s and travel height of 9.93 m. Its car dimensions are 1100 mm x 1600 mm x 2200 mm, Door dimensions are 900 mm wide x 2000 mm internal height with Two-panel centre opening Plain Panel Door type. The car design is SS silver brushed, Car Panel Finish is with Stainless steel Hairline AISI441 including Round Bend Handrail of Silver brushed stainless steel (ST4) at Rear Wall, flooring with 20mm Car skirting material including car operating panel of 1 Full Height Stainless Steel Face Plate Silver brushed StSt Segmented LCD display Square surface mounted Buttons with braille KDS90 and landing signalization with Stainless Steel 7 segment display Flush Mounted Silver brushed StSt Square,surface mounted with braille KDS90 etc complete as per the direction of engineer in charge.

od2/2023_2024 : Supply and Installation of a gate-opening motor in the swing gate using roller type opener (DC) with a maximum weight/length per gate leaf is 1000kg/5m along with 24V DC electro-mechanical gear motors with 2 nos of self-lock system Motor and 1nos Control Box & 2 no.s of remote including all materials, conveyance, all accessories etc complete as per the direction of engineer in charge.

od298/2024_2025 : Supply, Installation, testing, and commissioning of Orbit 40 Refreshable Braille Display Device which can be connected to a computer device as well as a mobile device via USB/Bluetooth including all materials, conveyance, all accessories etc complete as per the direction of engineer in charge.

od339/2024_2025 : Supply and installation of 10W hexagonal LED FT of model 857SSYMBOPC which will provide an environment-friendly, ultra-modern, energy-saving, surface-mounted, decorative appearance including all materials, conveyance, all accessories etc complete as per the direction of an engineer in charge. Make: Havells/ Philips/ Crompton/ equivalent

od2731/2024_2025 : Supply and Installation of Kibo XS, a portable, foldable, lightweight, table-lamp-like scanning device with camera-mounted-on-top and 3-toggle LED fill light. It connects seamlessly to any PC, Computer or Laptop via USB and works with web software to listen, translate, digitize, audio’tize and edit printed and handwritten documents with 3 level LED fill light etc. required as per direction of Engineer-in-charge.

CCTV INSTALLATION

od371775/2023_2024 : Supply and Installation of CCTV Camera with 2 MP IP Bullet camera 30m(Metal) DS-2CE16DOT-ITF (Hikvision/ Belkin/ TP-link or Equivalent) including all labour, materials, conveyance charges etc. as required.

od372154/2023_2024 : Supplying and installing of CCTV camera with 2 MP IP Bullet camera 30 m DS -2CD1023GOE-I(Hikvision/ Belkin/TP-Link or Equivalent) including all labour,materials and conveyance charge etc completed.

od372130/2023_2024 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron6 U Rack (Galvanisation thickness not less than 50 microns) with perforation notmore than 17.5%, in convenient sections and glass panelled doors, having adesignation of "500D" joined with connectors, suspended from the ceiling with G.I.suspenders including G.I. bolts & nuts, etc. as required.21.65" X 10" X 7"

od371918/2023_2024 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron2 U Rack (Galvanisation thickness not less than 50 microns) with perforation notmore than 17.5%, in convenient sections and glass panelled doors, having adesignation of "350D" joined with connectors, suspended from the ceiling with G.I.suspenders including G.I. bolts & nuts, etc. as required.21.65" X 10" X 7"

od371919/2023_2024 : Supply and Installation of CCTV Camera with 4 MP IP Bullet camera 30m(Metal) DS-2CD1T43G0-I(Hikvision/ Belkin/ TP-link or Equivalent) including all labour, materials, conveyance charges etc. as required.

od372184/2023_2024 : Supply and installation of CCTV camera with 2 MP IP Dome camera 30m DS-2CD1323GOE-1 (Hikvision/ D-link/ Belkin/ equivalent) including all labour, materials, conveyance charges etc complete as per the direction of engineer in charge.

od372190/2023_2024 : Supply and installation of CCTV camera with 2 MP IP Dome camera 30m DS-2CE76DOT-ITPFS (Make: Hikvision/ D-link/ Belkin/ equivalent) including all labour, materials, conveyance charges etc complete as per the direction of engineer in charge.

od372185/2023_2024 : Supply and installation of CCTV camera with 4 MP IP Bullet camera of 30m DS-2CD1043GOE-1 (Hikvision/ D-link/ Belkin/ equivalent) including all labour, materials, conveyance charges etc completed.

od372192/2023_2024 : Providing and fixing a specific Network Video Recorder (NVR) model, the DS-7632NXI-K2 for CCTV cameras manufactured by Hikvision/ Belkin/ TP-link or equivalent with 32 channels (indicating it can handle up to 32 video channels or cameras) implying support for connecting up to 2 SATA hard drives for storage including all connections as required.

od372194/2023_2024 : Providing and fixing a network switch of Power over Ethernet (PoE) capability with 8 Port and Full Giga which supports gigabit speeds (1,000 Mbps) on each port for faster data transfer manufactured by CP Plus/ TP-Link/ Hikvision/ D-link/ equivalents including all other accessories and connections as required.

od372195/2023_2024 : Providing and fixing hard disk drive with storage capacity 6 terabytes (TB) manufactured by Western Digital (W.D)/ equivalent having common interfaces for hard drives include SATA (Serial ATA) or NVMe (Non-Volatile Memory Express) for faster performance, especially in SSDs including all connections as required.

od372199/2023_2024 : Providing and fixing RJ-45 connector with twisted pair cables, such as Cat5e,Cat6, or Cat6a cables to establish ethernet networking having eight pins orconductors with TIA/EIA-568 standard wiring arrangements manufactured by D?Link/ Siemon/ Belkin / equivalent including all connections and other accessories etc as required.

od372200/2023_2024 : Providing and fixing a network switch of Power over Ethernet (PoE) capability with 4 Port and Full Giga which supports gigabit speeds (1,000 Mbps) on each port for faster data transfer manufactured by CP Plus/ TP-Link/ Hikvision/ D-link/ equivalents including all other accessories and connections as required.

od372225/2023_2024 : CAMERA BOXES:- Supply and fixing of PVC water proof boxes for the purpose of covering cameras having the size 4" X 4" including labour, materials, conveyance, all other accessories etc complete.

od372265/2023_2024 : POE Boxes- Supply and fixing of PVC water proof boxes for the purpose of covering POE- enabled network switches having the dimensions 10" X 8" X 5" including all labour, materials, conveyance, all other accessories etc complete

STUDIO EQUIPMENTS

od380844/2023_2024 : Supply of 5-inch powered Studio sound Monitor pair designed for professional audio and delivers clear, accurate sound reproduction across the frequency spectrum, from bass frequencies to high end details make of Vault/ Yamaha/ JBL or Equivalent.

od380845/2023_2024 : Supplying an inverter with a capacity of 800 VA, 100 Amp Hours Battery with best in class performance equipped with multiple features of Luminous power technologies/ Genus/ V-Guard / Equivalent.

od380846/2023_2024 : Supply and providing of Core i7 12 generation Computers with 16gb ram and 12700k Cooler master, L240 gigabytez790 aorus elite 16gb ram corsair 5200 3060 12gb msi 2tb ssd wd nvme etc complete including all materials, conveyance, all other accessories as per the direction of engineer in charge.

od381146/2023_2024 : Supply of PC 8 Over ear USB, Wired VOIP Headphones with mic which delivers quality stereo sound, easy USB connectivity with PC or Laptop and a clear noise cancelling microphone to match make of Boat/ Sennheiser/ Sony or Equivalent.

od381147/2023_2024 : Supply of Wired Over Ear Headphones without mic which is lightweight and comfortable to wear; good attenuation of ambient noise make of Boat/ Sennheiser/ Sony or Equivalent.

od381148/2023_2024 : Supply of 16 input 6 Bus Mixer for studio which provide the flexibility and control necessary to blend multiple audio sources, shape the sound, and deliver professional quality audio for a wide range of applications make of Studio master/ Ahuja/ Yamaha or Equivalent.

od381149/2023_2024 : Providing a pair of 8-inch Console sound active sound monitor designed for professional audio monitoring and it delivers precise and articulate bass response, complemented by a dedicated tweeter for high frequency reproduction make of JBL/ Vault/ Yamaha or equivalent.

od381150/2023_2024 : Providing HDMI Splitter 1 in 2 out which allows to display the same content from one source device on two different displays simultaneously etc. complete.

od381151/2023_2024 : Supply and Installation of 27 inch LED Curved Display monitor typically features a gently curved screen for an immersive viewing experience, providing a wider field of view and enhance comfort make of LG/ Samsung/ Panasonic or Equivalent.

od118/2024_2025 : Supplying of Sound card which processes digital audio data and converts it into analog signals for speakers or headphones, and vice versa for microphone input and are essential for audio playback, recording and communication functions on a computer make of Behringer/ Focusrite/ Presonus or Equivalent

od119/2024_2025 : Providing a Mic Stand for Studio with high quality steel structure with maximum carriage capacity and the base provides stability, while the shaft can be adjusted in height and angle to suit the user's needs make of Bespeco/ Samson/ Ahuja or Equivalent

od120/2024_2025 : Providing a Multi pattern large diaphragm true Condenser Microphone for demanding project studio recording applications, offering high sensitivity and delivers a warm, transparent sound quality perfectly suited for ensemble recording, make of Vault/ Cezo/ AKG or Equivalent.

od543/2024_2025 : Supplying a Pendrive of 128 GB of storage make of Hp/ Sandisk/ Samsung or Equivalent

od617/2024_2025 : Providing Sound Forge sound editing software for recording podcasts or audio books in high quality, cutting and editing audio files with professional restoration and mastering tools etc. as required

od619/2024_2025 : Supply of Mic Stand Boom arm for Microphone where the height and the angle of the rod can be adjusted and has a good structure, quality and weight make of Kreo/ Kadence/ Techblaze or Equivalent etc. as complete

od632/2024_2025 : Providing a High performance general purpose recording Microphone delivers a clear sound with accurate sonic detail for vocals, speech and instrument recording in project studios, make of Vault/ Cezo/ AKG or Equivalent.

od727/2024_2025 : Providing Cubase Pro10.5 Sound editing Software for composing, recording, editing and mastering music etc. as complete.

od730/2024_2025 : Providing Davinci Video editing Software enables production through colour correction, visual effects, motion graphics and post production audio etc. as required.

od782/2024_2025 : Providing speaker 2 in 1 delivers a sensationl sound and ambience make of Zebronics/ Fingers/ Philips or Equivalent etc. as complete

od5216/2024_2025 : Providing External Hard Disk Drive of capacity 2 TB make of Seagate/ Toshiba/ Tiasy or Equivalent

od5217/2024_2025 : Providing and installation of Operating System windows 11 pro 2021 home & student with MS Office Package etc. complete.

od5218/2024_2025 : Headset Splitter i in 5 ep out which enhances convenience and flexibility in various scenarios where sharing audio among multiple listeners is required make of BOCXN/ Xuma/ Sounce or Equivalent

STUDIO ACCOUSTIC ROOM

od572/2024_2025 : Providing and fixing side paneling with GI galvanized iron box panel frame work of 24 gauge perforated to an extent of 70% and of 4" thick box panels of (8'x1') in dimension. The panels with 4"(100MM) thick box panel should have infill acoustic material density varies from 32&1 6kg/cum (glass wool as acoustic material). The Material should have the ability to attain 50% implementation loss and attenuate incident sound energy from frequencies that are concentrated in the 125 to 10k hertz range to meet the ANSI standards. The external surface having cladded with noise reduction coefficient rated fabric & the encapsulated panels will be secured to floor with mildsteel track frame work made up of 16 gauge of U channel approx. size (20mm x 55mm x 40mm) and fasteners etc complete as per the direction of an engineer in charge.

od903/2024_2025 : Providing and fixing 6 mm thick loop pile carpet, the material attenuate the low frequency waves 125 to 8k Hz and less interference from low frequency sound.

od904/2024_2025 : Providing and Installation of Door Frame with 19mm plywood box type, cladded with layer of 3mm thick non-woven carpet. Groove to facilitate perfect sealing of the door shutter. Double doors frameworks and single door frameworks constitute this requirement. Also Providing a Door shutter of 2.5” thick double layered 12mm plywood with framework of 19mm plywood which will be insulated internally and covered with 3mm non-woven carpet. Suitable door handle and lock will be provided etc. as per Engineer in charge.

12.52.4 : Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.12.5 mm thick fully Perforated Gypsum Board tile made from plaster board having glass fibre conforming to IS: 2095 Part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with centre borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side , having as NRC ( Noise Reduction Co efficient) of 0.79, with 50 mm resin bonded glass wool backing.

od1422/2024_2025 : Providing and fixing Ceiling Paneling of GI galvanised iron box panel frame work of 24 gauge perforated to an extent of 70% and of 4" thick box panels of (8'x1') in dimension. The panels with 4"(100MM) thick box panel should have infill acoustic material density varies from 32&1 6kg/cum (glass wool as acoustic material). The Material should have the ability to attain 50% implementation loss and attenuate incident sound energy from frequencies that are concentrated in the 125 to 10k hertz range to meet the ANSI standards. The external surface having cladded with noise reduction coefficient rated fabric & the encapsulated panels will be secured to floor with mild steel track angle frame work (16 gauge mild steel powder coated L angle 50 x 50mm in size) to support the ceiling panel

od5220/2024_2025 : Supplying observation window: comprising of double layers 8mm thick glass with the inside glass being placed at an angle of 45 degrees. If desired. This is secured to a wooden frame work with rubber gaskets and silica gel. (3x2 ft)

od5237/2024_2025 : Providing and Fixing Whole Partition Wall of 12.5mm double layered gypsum board with GI frame work and in filled /sandwiched which acoustic work and in filled /sandwiched which acoustic materials As per the direction of Engineer- in-Charge

5th year AMC 15% for supply, installation and commissioning of software attached interactive flat panel display, open pluggable system, 3 star two ton inverter split AC,Passenger Elevator, kibo xs devices, core i7 12 generation computer(item numbers 1.57,1.56,3.70,3.84,3.88,5.3)

4th year AMC 10% for supply, installation and commissioning of software attached interactive flat panel display, open pluggable system, 3 star two ton inverter split AC,Passenger Elevator, kibo xs devices, core i7 12 generation computer(item numbers 1.57,1.56,3.70,3.84,3.88,5.3)

Miscellaneous and unforeseen items as per site execution/ Detailed measured/ Bill Attached

EXCLUSIVE OF GST

Note :1 All materials, Items, Equipment shall be best branded items with IS and approved by client/KEL

2:Rate should be inclusive of Insurance,Transportation, delivery and installation cost for all items

3.Rate should be Exclusive of GST.

4.Work should be executed as per DSR/PWD specification and direction of Engineer at site.

5.CEMENT: Make use Malabar cement only as per Govt. direction and in case of non availabilty of Malabar cement use Ultra Tech, Dalmia, Ramco or eq. brand in the order of preference.

6.RCC: (Assessment of strength of concrete by Cube testing at Approved Govt labs as per IS) Cement make: Use Malabar cement only as per Govt. direction and in case of non availabilty of Malabar cement use Ultra Tech, Dalmia, Ramco or eq. brand in the order of preference.

7.STEEL REINFORCEMENT: Make: Tata,Vaishak, SAIL, JSW or eq primary make in the order of preference

8.CENTERING & SHUTTERING: (Centering and shuttering for different category of work may be considered separately.)

9. SOLID BLOCK MASONRY: Min. average compressive strength as per IS shall be 40-50kg/cm2 and has to be assessed by testing at Govt. lab. ( Variation in rate due to change in size of block and level of floor as per DSR/PRICE has to be considered)

10.PLUMBING & SANITARY FITTINGS: Note: Make of Water supply and sanitary items: Best branded ISI make Jaquar, Cera, Hindware, Parryware or eq. in the order of pref. Water pipe: Supreme, Finolex or eq. with IS and all fittings with IS.

11. STEEL WORK G.I.PIPE: Make: JINDAL, Tata or eq. primary make in the order of preference.

10.DELUXE MULTI SURFACE PAINT SYSTEM: Make: JOTUN, Asian, Berger, Nerolas or eq. in the order of pref.

6.VETRIFIED FLOOR TILES/ CERAMIC GLAZED WALL TILES: Make: Khajaria, Jhonson, RAK, NITCO, Cera or Eq. in the order of preference and prior sample approval from KEL, Client

15.ALUMINIUM WORK: Make: INDAL, JINDAL in the order of preference and prior sample approval from KEL, Client

10.Rigid PVCPipes/Casing & Capping - A-ONE/REPUTED MAKE with ISI , Precession, Balco, GEO

9. ACRYLIC SMOOTH EXTERIOR PAINT/ SYNTHETIC ENAMEL PAINT/WHITE CEMENT BASED PUTTY/ CEMENT PRIMER: Make: Asian, Berger, Nerolas or eq. in the order of pref.

11.ELECTRICAL: Note: Rate should be inclusive of preparation of schematic diagram and getting approval from KSEB/Electrical Inspectorate. Statutory fees paid to KSEB/EI shall be paid by us separately.

Make of Electrical equipments/materials

All electrical materials/equipments shall be of best branded items with ISI, strictly as per schedule specification

Panel Boards: CPRI certified reputed manufacturers make

MCB/ELCB/DB - L&T/LEGRAND/SCHNEIRDER or equivalent

Cables & wires - Finolex/KEI/POLYCAB/RPG/V-GUARD

Switches/Sockets/Regulators - SCHEIDER/ABB/HAVELS/LEGRAND or equivalent

Cable Glands & Sockets - REPUTED MAKE , Cosmos

Indicating Lamps - TEKINIC/RISHUB/STC, L&T, Schneider or equivalent

Ceiling/Exhaust fan: Havells, Orient, Usha, Crompton Greaves, Bajaj

E Mohammedali