Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.2 LAccepted-AOC 59 NEW MARKET CLOCK TOWER DEHRADUN UK PIN 248001 | DEHRADUN | UTTARAKHAND | 248001 | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹27.4 L+₹75,800 (2.84%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹30.4 L+₹3.8 L (14.2%)Rejected-Finance SECTOR 10 PANCHKULA | PANCHKULA | PANCHKULA | HARYANA | L3 | Rejected-Finance Other than lowest bidder |
Tender Value
₹28 L
EMD Value
₹56,000
Closing Date
29 Jul 2022, 6:00 pmClosed
GE UTILITY
GE UTILITY AMBALA CANTT 133001
REPAIR REPLACEMENT OF NON CLOG SEWAGE SUBMERSIBLE PUMP SETS AND CONNECTED ITEMS UNDER GE UTILITY AMBALA CANTT
2022_MES_533359_1
CA NO GE U AMB T 10 OF 2022-23
Open Tender
Civil Works
Item Rate
240 days
GE UTILITY AMBALA CANTT
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE UTILITY AMBALA CANTT
₹56,000
25 Aug 2022
24 Jun 2022
1 Aug 2022
24 Jun 2022
29 Jul 2022
15 Jul 2022
24 Jun 2022 - 1 Jul 2022
Amount
Taking out Non clog submersible sewage pumping set from sewage well foundation (after and including dewatering of sewage well) of 60 HP capacity by lifting and dismantling the same for assessing and carrying out the repair/servicing and replacement of unserviceable spare parts with new spare parts as listed in subsequent items and making good in running condition with testing and balancing, reassembling and lowering the same in well & fixing on the foundation making connections and testing complete all as specified & directed by Engineer-in-Charge. Note:- (a) The replaced parts of pump shall be measured & paid separately here-in-after as supply only being fixing is inclusive in the rate quoted for the item. (b) Dewatering of sewage well shall be included in the quoted rate of item.
Description all as per Srl item No 1 here-in-before but of capacity 40 HP
Description all as per Srl item No 1 here-in-before but of capacity 30 HP
Description all as per Srl item No 1 here-in-before but of capacity 20 HP
Description all as per Srl item No 1 here-in-before but of capacity 7.5 HP to 10 HP
Description all as per Srl item No 1 here-in-before but of capacity 3 HP to 5 HP
Taking out old unserviceable lubricating oil from the chamber, cleaning and refilling the fresh lubricating oil complete all as specifed & directed by Engineer-in-Charge.
Rewinding of burnt winding in motor capacity 60HP non clog submersible sewage pumping set with suitable size and proper guage of winding wire using best quality of insulation material provided with thermal switches for protection against excessive temp and replacing O ring set, full fastner set, Nitrile O ring and bearing, seals and varnish the motor using fine quality varnish and fixing in old position complete all as specified & directed by Engineer -in- Charge.
Description all as per Srl item No 8 here-in-before but of pump motor 40 HP.
Description all as per Srl item No 8 here-in-before but of pump motor 30 HP.
Description all as per Srl item No 8 here-in-before but of pump motor 20 HP.
Description all as per Srl item No 8 here-in-before but of pump motor 7.5 to 10 HP
Description all as per Srl item No 8 here-in-before but of pump motor3 to 5 HP
Supply only CI impeller with guide bush suitable for 60HP Non clog submersible sewage pumping set complete all as specified & directed by Engineer-in-Charge
Description all as per Srl item No 14 here-in-before but cap of pump 40 HP.
Description all as per Srl item No 14 here-in-before but cap of pump 30 HP.
Description all as per Srl item No 14 here-in-before but cap of pump 20 HP.
Description all as per Srl item No 14 here-in-before but cap of pump7.5 to 10 HP.
Supply only lubricated upper/lower bearing for 60 Hp non clog submersible pump complete all as speicified & directed by Engineer-in-Charge.
Description all as per Srl item No 19 here-in-before but 40 HP
Description all as per Srl item No 19 here-in-before but 30 HP.
Description all as per Srl item No 19 here-in-before but 20 HP.
Description all as per Srl item No 19 here-in-before but 7.5 HP to 10 HP.
Description all as per Srl item No 19 here-in-before but 3 to 5 HP.
Supply only hard metal double upper and lower mechanical seal assesbly combination for non clog submersible pump, of capacitor 60 HP complete all as specified & directed by Engineer-in-Charge.
Description all as per Srl item No 25 here-in-before but cap of pump 40HP
Description all as per Srl item No 25 here-in-before but cap of pump 30HP
Description all as per Srl item No 25 here-in-before but cap of pump 20 HP
Description all as per Srl item No 25 here-in-before but cap of pump 7.5/10 HP
Description all as per Srl item No 25 here-in-before but cap of pump 3/5 HP
Supply and fixing in replacement CI auto coupling of size 100 mm dia from sewage well of size depth 10 Mtr and 9 Mtr dia.
Supply and fixing in replacement CI auto coupling of size 150 mm dia from sewage well of size depth 10 Mtr and 9 Mtr dia.
Supply and fixing in replacement CI duck foot bend of size 100 mm dia from Sewage Well of size depth 10 Mtr and 9 mtr dia.
Supply and fixing in replacement CI duck foot bend of size 150 mm dia from Sewage Well of size depth 10 Mtr and 9 mtr dia.Note for item No 31 to 34:- Dewatering of Sewage well is included in Quoted rate if required.
Supply and fix in replacement PVC insulated submersible copper cable flat/round of size 6 Sqmm 3 core complete all as specified & directed by Engineer-in-Charge
Description all as per Srl item No 35 here-in-before but 10 Sqmm 3 core.
Description all as per Srl item No 35 here-in-before but 16 Sqmm 3 core.
S&F in replacement CI column pipe both end flanged ISI marked of size 100mm dia including lowering down the column pipe including dewatering of sewage well if required complete all as specified & directed by Engineer-in-charge.
S&F in replacement CI column pipe both end flanged ISI marked of size 150mm dia including lowering down the column pipe including dewatering of sewage well if required complete all as specified & directed by Engineer-in-charge.
Supply and fix in replacement MS adjustable spiral bottom plate suitable for 40 to 60HP Motor complete all as specified & directed by Engineer-in-Charge.
Description all as per Srl item No 40 here-in-before but for size 20 to 30 HP motor.
Description all as per Srl item No 40 here-in-before but for 7.5 HP to 10 HP motor.
Supply and fix in replacement shaft AISI-410 suitable for 20 to 30 HP Motor.
Description all as per Srl item No 43 here-in-before but suitable for size 40 to 60 HP motor.
Supply and fix in replacement MS hexagonal nut and washers MS Steel eye Bolts, Allen Screws etc ISI Marked.
S & F in replacement Rubber gasket 150mm dia ISI marked complete all as specified & directed by Engineer-in-Charge.
Description all as per Srl item No 46 here-in-before but 100 mm dia -do-.
S & F in replacement profile gasket (MS bracket) 100mm dia ISI marked suitable for non clog submersible pump complete all as specified & directed by Engineer-in-Charge
M&L PCC foundation of size 75cmx75cmx20cm with PCC 1:2:4 type B-1(ushing 20mm graded crushed store aggregate) including 8mm thick frame base plate of size 40cmx40cm suitable for 40 to 60HP Non Clog Submersible Pump including self drill bolt of size 150mm long and 15mm dia of shank fully threaded 04 Nos made of stainless steel complete all as specified & directed by Engineer-in-Charge. Note : The platform shall be constructed in sewage well of approximate 12mtr deep including dewatering if required and the contractor shall quote rate keeping in view the depth of sewage well and dewatering.
S & F in replacement CI sluice Valve PN 1.6 with SS Steel spindle and CI wheel ISI Marked of Size 100mm complete all as specified and directed by Engineer-in-Charge.
Description all as per Srl item No 50 here-in-before but 150 dia.
Description all as per Srl item No 50 here-in-before but 200 dia.
Description all as per Srl item No 50 here-in-before but 250 dia.
Supply fix and testing in replacement of Non Return Valve 150 mm dia PN 1.6, connected with two end flanges suitable for connecting with Pipe, nut-bolts etc including taking down old unserviceable one complete with flanges nut - bolts etc all as specified and directed.
Description all as per Srl item No 54 here-in-before but 100 mm dia.
S & F in replacement MS Nut, bolts and washers of size 5/8"x3", 5/8"x4" long complete all as specified and directed by Engineer-in-Charge.
Dismanteling the UNSV sign board in sewage wells of Sector 'A', 'b' & 'C' . Supply and fixing of retro reflector board of size 4'x3' with high quality retro reflector tape green base high intensity prismatic sheeting (HIP) grade white retro tape cutting good quality with 3mm thick ACP sheet base including 40mm x 40mm square size MS pipe legs and all around the board appx 18 feet incl welding the MS flat plate of size 25mm x 3mm across the board appx 10 feet including grouting the sign board in PCC 1:2:4 complete all as specified and directed by engr-in-Charge
Scraping old existing paint from MS board installed at Sewage Installations of any size installed at plant including making smooth surface with primer and applying two coat of synthetic enamel red paint on surfaces and black paint on angles/channels including installation data written with white paint including earth work, PCC and welding of board complete of approved colour as directed by Engr-in-charge.
M&L for attending any type pump/motor/LT panels/DGs/Starters complaint at Sewage pump houses and rectify the same, Rates are also included for replcement of thimbles any type and any size with nut-bolts and cable jointing with tap, gland packing, greasing in pumps/valves with all connected items all as specified by the Engr-in-Charge. Note: Complaint should be rectify within 06 Hrs otherwise a penalty of 250 Rs per day per job shall be imposed.
Scraping old existing paint from delivery line inside and outside the sewage well including making surface smooth and one coat of primer and two coat of synthetic enamel paint of approved colour as specified and directed by Engr-in-charge.
Dewatering sewage well and taking up rusty & chocked CI rising main 100mm dia from sewage well 10 to 12mtr deep opening up rusty & worn out nut & bolts cleaning the same with wire brush, bocky & refixing in sewage well by replacing nut, bolts & rubber gasket etc, complete all as specified and directed by Engr-in-Charge
Description all as per ser item No. 61 here in before but 150 mm dia.
Supply and fix in replacement CI fittings Bend, tee, reducer etc for pipe 100m to 300mm dia complete all as specified and directed.
M&L for preperation of old decorated plastered or unplastered surfaces of walls of STP tanks/bldgs by complete brooming down or steel wire brushing , scrapping down smoke and applying two coat of cement base paint complete at all Sewage well installations all as specified and directed by Engr-in-Charge.
M & L for preperation of old decorated brick / concrete , plastered or unplastered surfaces of ceiling by brooming down with steel wire brushing , scraping down smoke soot , moulds, moss and effloroscent salts , trading oil and grasy spots etc. and applying two coat of white wash on ceiling/wall complete in all sewage well installations all as specified and directed.
M&L for PCC ( 1:4:8 ) type D2 with 40 mm graded stone aggregate for foundations filling and mass concrete complete all as specified and directed by Engr-in-Charge .
Desiliting/cleaning of sewage well of depth 12 Mtr and 9 Mtr dia taking out sludge by sludge vacuum truck in the form of solid also and getting out and removal to as distance exceeding 250mtr but not exc 500 Mtr and burried the same in low laying area as directed by Engineering - in- Charge.
Material and labour for rubber moulded machine pressed precast concrete interlocking paver with grey cement confirming to IS -15658-2000 of 60 mm thickness , M-35 grade as in path , hard standing etc laid over and including 25 mm compacted sand cushioning , including 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate including surface excavation over area n. exc. 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil and removing excavated soil exc 50 mtr but n . exc 250 mtr , at any installation as per requirement complete all as specified and directed by Engr-in-charge
Maintenance and repair to leakage/blockage of water supply MS/CI/DI pipe line of 80 mm to 250 dia size including necessary excavation required for taking out burning out lead joint or damaged rubber ring/hole from position and making good to the disturbed surfaces as per existing surface after replacing new spun yarn and lead joint or Tyton joint or necessary fitting required as per site properly including welding work and making the pipe line leak proof completly to the entire satisfaction of Engineer-in-Charge .Note:- Excavation and earth work shall be included in quoted rate.
Note:- Amount of credit of Rs. 230942.00 for retrieved materials is mentioned in Schedule of Credit attached in tender documents in pdf form which will be deducted offline while acceptance of tender.
Krishana Builders
M/s Friends Engineering Works
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .