Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | l1₹10.2 LAccepted-AOC | l1 | Accepted-AOC L1 | |
| 2 | l2₹10.4 L+₹17,121.98 (1.68%)Rejected-AOC | l2 | Rejected-AOC L2 | |
| 3 | l3₹10.4 L+₹21,659.03 (2.12%)Rejected-AOC | l3 | Rejected-AOC L3 | |
| 4 | l4₹10.5 L+₹29,866.69 (2.93%)Rejected-AOC | l4 | Rejected-AOC L4 | |
| 5 | l5₹10.6 L+₹42,049.37 (4.12%)Rejected-AOC THATTANANDIYIL PATTIAM KUNNOTH PARAMBA GRAMA PANCHAYATH KUTHUPARAMBA | KANNUR | KERALA | 670001 | l5 | Rejected-AOC L5 |
| Sl No | Description | Qty | Unit | Sajeev PP L3 | Ajith T M L5 | RAJAN S P L4 | Satheesan M C L6 | M P PREMAN L7 | jithin mp L2 | SHIJIN N K L1 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00SHEET ROOFING | ||||||||||
| 1.00 | 50.6.4.1:Hollow block masonry using pre cast blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete | 22.65 | cum | 4,816.69 ₹1,09,088.4 | 4,911.03 ₹1,11,225.01 | 5,050 ₹1,14,372.4 | 5,047.3 ₹1,14,311.25 | 5,100 ₹1,15,504.8 | 4,795.72 ₹1,08,613.47 | 4,717 ₹1,06,830.62 Lowest |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 4,030.2 | kg | 160.44 ₹6,46,604.97 | 163.58 ₹6,59,259.79 | 160 ₹6,44,831.68 | 168.12 ₹6,77,556.89 | 169.44 ₹6,82,876.75 | 159.74 ₹6,43,783.83 | 157.1 ₹6,33,144.11 Lowest |
| 1.00 | OD58007/2025-2026:Providing and fixing Alu Zinc profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.40 mm (+0.05%), thickness . Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (MOD 12.50 of DSR ) | 237.94 | sqm | 494.87 ₹1,17,748.38 | 504.57 ₹1,20,056.38 | 510 ₹1,21,348.38 | 518.57 ₹1,23,387.51 | 538.49 ₹1,28,127.23 | 492.71 ₹1,17,234.43 | 484.58 ₹1,15,300 Lowest |
| 1.00 | OD58008/2025-2026:Supplying and fixing 200 mm PVC square split pipe as rainwater spout(observed data) | 78.14 | metre | 465.59 ₹36,381.2 | 474.71 ₹37,093.84 | 470 ₹36,725.8 | 487.88 ₹38,122.94 | 506.63 ₹39,588.07 | 463.56 ₹36,222.58 | 455.91 ₹35,624.81 Lowest |
| 1.00 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm) | 39.07 | metre | 484.66 ₹18,935.67 | 494.16 ₹19,306.83 | 470 ₹18,362.9 Lowest | 507.87 ₹19,842.48 | 527.38 ₹20,604.74 | 482.55 ₹18,853.23 | 474.58 ₹18,541.84 |
| 1.01 | 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete | 28.8 | sqm | 331.22 ₹9,539.14 | 337.7 ₹9,725.76 | 320 ₹9,216 Lowest | 347.07 ₹9,995.62 | 360.41 ₹10,379.81 | 329.77 ₹9,497.38 | 324.41 ₹9,343.01 |
| 1.01 | 5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size | 2.88 | cum | 8,996.57 ₹25,910.12 | 9,172.78 ₹26,417.61 | 9,200 ₹26,496 | 9,427.31 ₹27,150.65 | 9,789.52 ₹28,193.82 | 8,957.41 ₹25,797.34 | 8,809.58 ₹25,371.59 Lowest |
| 1.01 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | 230.4 | kilogram | 96.43 ₹22,217.47 | 98.32 ₹22,652.93 | 97 ₹22,348.8 | 101.05 ₹23,281.92 | 104.93 ₹24,175.87 | 96 ₹22,118.4 | 94.42 ₹21,754.37 Lowest |
| 1.01 | 50.18.8.7.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc 63 mm pipe 4 kgf/ cm2 | 84 | metre | 561.6 ₹47,174.4 | 572.6 ₹48,098.4 | 570 ₹47,880 | 588.49 ₹49,433.16 | 611.1 ₹51,332.4 | 559.24 ₹46,976.16 | 549.92 ₹46,193.28 Lowest |
Tender Value
₹11.3 L
EMD Value
₹28,331
Closing Date
18 Jul 2025, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AE LSGD
LID AND EW PANNYANNUR PANCHAYATH LSGD SECTION
pannyannur gp project no 31 laying sheets for anganawadies
2025_LSGD_773496_19
NO/04/ETENDER/2025-26
Open Tender
Civil Works - Others
Item Rate
180 days
pa
Please refer Tender documents.
6 documents required · 6 mandatory
₹2,760
Yes
₹28,331
Yes
29 Oct 2025
9 Jul 2025
22 Jul 2025
9 Jul 2025
18 Jul 2025
9 Jul 2025
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .