REPAIR TO JOINERY, PERIODICAL SERVICES AND MISC WORKS IN E/M INSTALLATION AT TECH AREA AND REPAIR TO JOINERY, GI SHEETS, FALSE CEILING AND PANELLING ETC IN TECH AREA AND SK RANGE AT AF STN HALWARA

Amount

Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area not exc 1.5 Sqm each, complete all as specified and directed.

All as per item No 2 but area exc 1.5 Sqm but not exc 4 Sqm each.

Taking down shutter from the frame area exceeding 1 sqm not exceeding 2 sqm each leaf, complete all as specified and directed.

Taking down shutter from the frame area but not exceeding 1 sqm each, complete all as specified and directed.

S&F Factory made single extruded WPC (wood Polymer Composite) solid door/ window/ Ceosetory windows & other frames / Chowkhat of size 45x70 mm comprising of virgin PVC polymer of K value 58-90 (Suspension Grade), Calcium carbonate and natural fibers (wood powder /rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full boky threaded star headed SS screws having minium frames density of 750 Kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edgn minimum compressive strength of 58 N/mm, modules of elasticity 900 N/mm and resistance to spread of flame of class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required MS hold fast / lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-in-charge (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately), complete all as specified and directed.

All as per Sl item No 5 above but size 65X125 mm.

All as per Sl item No 5 above but size 65X100mm. Note: For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimesnsions on plus side shall be acceptable but no extra payment on this account shall be made.

M&L for factory made 18mm thick 100% solid WPC Plain board of required size comprising of virgin PVC resin of K value 57-60 ( suspension grade, calcium carbonate and natural fibres (Wood powders / rice husk / wheat husk) and non toxic additives, made from Extrusion process WPC foam sheet single Extruded (inner) with density not less than 650kg/Cum an ISO 9001-2015 certified company, having good screw holding capacity (screw withdrawal strength of 2000N (face) & 1100N (Edge), Minimum compressive strenth of 50N/sq mm, Modulus of elasticity 850N/Sq mm and resistance of spread of flame of class A category with property of being Termite / Borer free. Water / Moisture proof, fire retardant and fixing with SS butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, complete all as specified and directed. Note :- For Item No 05 & 8 (i) Material test certificate and authentication shall be compulsory provided by the manufacturing company. (ii) Contractor shall submit e-way bill, Purchase Voucher, Test certificate/ Test report etc alongwith payment. (iii) Work shall be executed through original manufacturer / Authorised representative.

S&F 2nd class hardwood 30mm thick glazed or skelton shutters, open rebated prepare to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut or mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a), complete all as specified and directed.

S&F 35mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed.

S&F 35 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S&F factory made solid PVC door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as specified and directed.

S&F factory made solid PVC moulded door shutter with partical board core, 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm moulded PVC sheet on the front face & 2mm plain colour plain PVC sheet on back face and fixing in frame, complete all as specified and as directed.

Dismantling wrought iron work or mild steel work of any description not otherwise provided for, complete all as specified and directed.

M&L for framed work of Fe-410W grade E-250 quality- B as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing, complete all as specified and directed.

S&F Powder coated (minimum thickness of powder coating 50 micron) aluminium frame of size (100mmx44mmx1.5mm) for doors, windows, ventilators or in partitions with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.

&F Powder coated (minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section, vertical style of door shutter of size 85mm x 44.45mm x1.5mm thick, top , middle and bottom rail of size 85mm x 44.45mm x 1.5mm thick and fixing plain/tinted sheet glass or 3mm thick aluminium coated panel ACP sheet with aluminium beading rubber gasket/beading as directed including fittingsand four Nos aluminium hinges of size 100mm, two aluminium tower bolts of 250mm size, complete all as specified and as directed. Note:- Cost of sheet glass Plain/frosted and ACP sheet & fittings mentioned above are deemded to be included in the quoted rates and nothing extra is admissible.

S&F Powder coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung/fixed type without sash bars, aluminium section weighing 0.55 kg/ m including necessary joining cleats, zing clips, rubber neoprene packing, anodised aluminium snap beading screws anodised aluminium fittings such as peg stay, Tower bolt 150mm long 1 No. hinge type B-21, 100 mm long 2 Nos, suitable handle 1 No, complete all as specified and as directed.

S&F Powder coating aluminium grills of any pattern/design weight not less than 1.5kg per square meter, complete all as specified and as directed.

S&F in repairs 18mm thick medium density fibre board, exterior grade, fixed to timber frame work as in cup board and cup board shuters including leeping/beading fancy type with screws, complete all as specified and directed.

S&F aluminium handles cast type anodised 100mm long, complete all as specified and directed.

Hacking out broken glass (any size shape, thickness, quality or description) from wooden/metal frame glazed with putty or fixed with beads having area not exc 0.50 sqm in each pane, complete all as specified and directed.

S&F in repair aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long, complete all as specified and directed.

S&F in repair aluminium handles cast type anodised 150mm long, complete all as specified and directed.

S&F in repair 300 mm long aluminum anodised sliding door bolts, aluminium alloy, door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts andsliding bolts of extruded sections or cast-aluminium, complete all as specified and directed.

S&F in repair 100 mm size butt hinges medium weight, cold rolled, mild steel, complete all as specified and directed.

S&F in replacement door closer cast iron body hydrualically regulated, designation 03, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg, complete all as specified and directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.

S&F brass Mortice lock vertical type 75mm 4 Levers, complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness including cover fillets of any description, complete all as specified and as directed.

S & F anodised aluminium snap grid frame work for false ceiling, size of grid 605x605mm including hangers 6mm dia GI (upto 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI, flat 40 x 3 mm size 60mm long and expansion hold fastners 12.5mm dia, 40mm long, complete all as specified and directed.

S&F 7mm thick pvc laminated gypsum ceiling board of size 595mm*595mm in ceiling which will be required to fixing the ceiling as per manufacturers instructions, complete all as specified and as directed.

S&F 7mm thick pvc laminated gypsum ceiling board of size 595mm*595mm in without annodised aluminium snap grid ceiling fixed with screw as per manufacturers instructions, complete all as specified and as directed.

S&F as in repair 5mm thick any colour/ design PVC hollow block wall panelling along with pvc angle ,corner, strips etc required as per site, complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc, complete all as specified and directed.

M&L for brick works with sub class 'B' bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces even and fair without using extra cement, complete all as specified and directed.

M&L for rendering 5mm thick on fair faces of ceiling in cement mortar 1:3 and surfaces finished even and smooth without using extra cement, complete all as specified and directed

Taking down cement plaster on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces using WPC even and fair without using extra cement, complete all as specified and directed. Note :- WPC will be measured and paid seperately under respective items.

M&L for rendering 5mm thick on fair faces of ceiling in cement mortar 1:3 and surfaces finished even and smooth without using extra cement, complete all as specified and directed

M&L for preparation of new plastered surfaces of wall and applying two coats of exterior acrylic emulsion paint over a coat of primer in camouflage pattern, using minimum 3 different approved tint/ colour as approved by GE, complete all as specified and directed.

S&F 35 mm thick factory made IInd class hard wood glazed or skelton shutter open rebated prepared to receive glass, gauge etc without sash bars edges of framing plain fitted with cut & mitred beads for securing glass etc size of member all as per clause 8.23 (a) of SSR part-I, complete all as specified and directed.

S&F factory made soild panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed togehter with solvent cement, supplying & fixing in the frame at site as per specification, complete all as specified and directed.

S&F Powder Coating aluminium frame for doors, windows, (minimum thickness of powder coating 50 micron) ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.

Supply and fixing Anodised aluminium grill (anodised tranparentor dyed to required shade according IS : 1868/ pattern, with approved standard section and fixed to the existing window frame with CP brass stainless steel screws @200 mm centre to centre including cutting the grill to proper opening size for fixing and operaton of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples in any type of door/win/ventilators including fixing of new beading if old damaged, complete all as specified and directed.

M&L preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M&L for prepraration of old painted wood or wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

All as per Item No.57 above but on steel and iron surfaces .

S&F in repair aluminium anodised barrel tower bolts of extruded section and fixed 150 mm long, complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section and fixed 150 mm long, complete all as specified and directed.

S&F aluminium handles cast type anodised 150mm long, complete all as specified and directed.

S & F alumunium alloy sliding door bolt with hasp & staple and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed of size 300 mm long, complete all as specified and directed.

S & F in repair alumunium alloy sliding door bolt with hasp & staple and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed of size 300 mm long, complete all as specified and directed.

S&F 100 mm size butt hinges medium weight, cold rolled, mild steel, complete all as specified and directed.

S&F door closer cast iron body hydrualically regulated, designation 03, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg, complete all as specified and directed.

M&L in repair of welding butt hinges and helical door spring in any situation and at any floor including taking down shutter and refixing in same opening and making functional complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality and fixing in frame with glass putty or fixed with wooden beads having area of any description in each pane, complete all as specified and directed.

S & F in repair steel rolling shutters without ball bearing as specified including top covers anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, complete push or pull or manual type having thickness of laths 1.00 mm, complete all as specified and directed.

M&L for preparation of new surfaces of steel and iron of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

M&L prepration of old plaster surfaces of wall and applying two coats of premium exterior acrylic emulsion paint in camouflage pattern, using minimum 3 different approved tint/colour as approved by GE, but height of bldg upto 12 mtr, complete all as specified and directed. Note :- The rates quoted by the Contractor shall deemed to be included for use of scafolding and cradles including hoisting and lowering and insurence of the workers.

M&L for preparation of old decorated plastered & un plastered surfaces of walls by brooming down or steel wire brushing, scraping down smoke root mould moss and efflorescent salts trading oil and greasy spots filling holes cracks with wall care putty all and applying two coat of distemper oil emulsion, complete all as specified and directed.

S&F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints, step clamps, including all fittings (any type of 'T'/tee ,bend,Y, Branch piece single/double, reducer , vent coil, access door, junction single/double, equal/unequal , any type of trap etc) 75mm dia fixed to walls/floor/trenches etc and height of building upto 12 m, complete all as specified and directed.

All as per item No. 72 here in before but for 110mm dia pipes.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for non skid jointless cerermic coloured tiles (Ist quality) 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.18 Sqm but not exceeding 0.38 Sqm in neat cement slurry and pointed in white or coloured cement with pigment over and including 15 mm thick screed bed in cement motar 1:6, complete all as specified and directed.

All as per above item No 75 but as in skirting, dados/Vertical surfaces over and including rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 rough finished surfaces to receive tiles.

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base finished even and fair surfaces without using extra cement, complete all as specified and directed.

Demolition of Cement Concrete of in ground floor and as in pavings n.exc 15cm in thickness ( below or above ground level) in patches , & removal of rubbish outside MoD land, complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 Type D-2 using 40mm graded stone aggregate as in pavement sub base, complete all as specified and directed.

M&L for 80mm thick Machine pressed precast concrete interlocking paver block (M-40 Grade) with grey cement and no pigments, any shape and size confirming to IS 15658-2006 laid over sand cushioning, complete all as specified and directed. Note :- Sand cushioning shall be measured and paid seperately.

M&L for brick works with sub class 'B' bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:4, complete all as specified and directed.

M&L prepration of new plaster surfaces of wall and applying two coat of premium exterior acrylic emulsion paint over a coat of primer in camouflage pattern, using minimum 3 different approved tint/colour as approved by GE, complete all as specified and directed.

BEHL AND COMPANY (BID ID -3363905)

Deol Builders (BID ID -3364763)

M/S SANGA SINGH AND CO (BID ID -3364462)

M/SSKANDCO (BID ID -3364661)

M/S Maa Dhari Builders (BID ID -3364590)

JINDAL AND COMPANY (BID ID -3364549)

HARISH BUILDERS (BID ID -3364805)