Repair and Maintenance work at Hydro Mechanical Division Room at Dam Top, NBPS, Alchi, Leh-Ladakh.

Dismantling tile works in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm.

Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead .

Dismantling aluminium I Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material within 50 metres lead as directed by Engineer-in-charge.

Brick work with Cement Concrete Bricks (1 :3:6) of size 9"x4 1/4"x2 3/4" in super structure above plinth level upto floor V level in: Cement mortar 1 :4 ( 1 cement : 4 coarse sand)

12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 3 ( 1 cement : 3 fine sand)

Providing and laying Reinforced Cement Concrete 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) in suspended floors, balconies, landings and staircase having upto 15° slope. excluding cost of centering and shuttering , all work upto floor V level

Centring and shuttermg including strutting, propping etc. and removal of form for· Stairs, (excluding landings) except spiral staircases.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars.

Providing and fixing anodised aluminium work (with minimum 15 micron uniform anodic coating) consisting of tee I angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass I stainless steel sunk screws, aluminium perimeter angles fixed to wall with rawl plugs @ 450 mm centre to centre and fixing the frame work to G. I level adjusting hangers (6 mm dia. M.S. rods) with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge (level adjusting hangers, ceiling cleats and expansion hold fastners to be paid for separately )

Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine-cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ ceilings floors, the fixing on plate in one row on one side of joint only shall be done with with stainless steel dash fastner of 8 mm dia. and 75 mm long bolt including providing aluminium washers 2mm thick, 15mm dia. at a staggered pitch of 200 mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete. as per drawing and direction of Engineer-in-charge Anodised aluminium sheet 2.5 mm thick (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and and fixing 1st quality ceramic glazed tiles conforming to IS:13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Engineer in charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3 kg per sqm including pointing in white cement mixed with pigments of matching shade complete.

Providing and fixing ceramic glazed floor tiles 300X300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS:13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in colour shade except white, ivory, grey, fume red, brown laid on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigments etc., complete.

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : One or more coats on old work.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size). Nallah.

Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied: W.C. pan with lSI marked white solid plastic seat and lid.

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.: Concealed pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall 20 mm dia. nominal bore

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.: Concealed pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall 15 mm dia. nominal bore

Providing and fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China wash basin size 550x400 mm with single 15 mm C.P. brass pillar taps.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back ,for the reception of pipes and fittings.