Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹1,790
Closing Date
12 Jun 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Barrackpore Division
HINDUSTAN AERONAUTICS LIMITED Barrackpore Division Barrackpore Post Parganas (N) , Dist. 24 W. Bengal - 700 120 Phone : 2592-0157/2592-0163 Fax No : 91-033-2592-2379
ELECTRICAL WORK IN QUALITY OFFICE, EXISTING NDT AND METROLOGY LAB AT HAL BARRACKPORE.
7594
HAL/BKP/Elect/QC/2024/236
Works
Helicopter Complex -Barrackpore Divn-PM-Cheetah-Chetak-Plant Maintenance-Electrical
₹0
₹1,790
12 Jun 2024
22 May 2024
22 May 2024
12 Jun 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
Goods & Service Tax Registration No
Format of Undertaking
PAN No.:
Electrical Licence.:
Contact details
Please Enter Contact person Name
Pls Enter Mobile No
Average annual financial turn over during the last 3 years, ending 31st March of the previous financial year [ should not be less than 30% of Amount put to tender]
TURN OVER IN Rupees
Pls Enter Turn over in Rupees for all the 3 years
ESI & PF Nos with proof (If any)
Related Document to be Uploaded to e-procurement Portal
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be Uploaded to e-procurement Portal (Note Canceled cheque leaf to be uploaded)
Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender Notice.
Pls Enter Details of 'Name of the Bank' , 'Date of Issue','Value in Rs
Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
40% (Three Works)
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Please enter Details for Work No 1
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No II
work done
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No III
Details of person holding the power of Attorney (If different from contact person)
Related Document to be Uploaded to eProcurement Portal
Pls Enter Details for Person holding Power of Attorney
DECLARATION :
Pls Accept The Declaration
DECLARATION II
Pls Accept the Delaration II
Description
Supply and conceal fixing of metallic Vertical TPN DBs, 12 way for FP MCCB Incomer and SP/TP MCB Outgoing) 415 volts operation. Double door. For conceal fixing works like wall breaking, plastering, smooth finish etc. is included in the scope of work.
Supply and conceal fixing of metallic Vertical TPN DBs, 08 way for FP MCCB Incomer and SP/TP MCB Outgoing) 415 volts operation. Double door. For conceal fixing works like wall breaking, plastering, smooth finish etc. is included in the scope of work.
Supply and conceal fixing of Double door metallic horizontal SP DB, 8 way for 25 Amps Triple pole with neutral MCB Incomer and SP MCB Outgoing) 415 volts operation with 200 AMP rated busbar. For conceal fixing works like wall breaking, plastering, smooth finish etc. is inclueded in the scope of work.
Supply, fixing and electrical connection of MCCB FP 63/100 Amps 415 Volt operation fixed type breaking capacity of 16KA.
Supply, fixing and electrical connection of MCB TP 32 Amps, C series, 10 KA 415 Volt operation.
Supply, fixing and electrical connection of MCB SP 25 Amps, C series, 10 KA 240 Volt operation.
Supply, fixing and electrical connection of MCB SP 20 Amps, C series, 10 KA 240 Volt operation.
Supply, fixing and electrical connection of MCB SP 10 Amps, C series, 10 KA 240 Volt operation.
Supply and laying or fixing or passing thorugh pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed with stranded conductor 3.5 core 95 Sqmm nominal cross section in service connections. Material like joining material, catenary, GI wire, gland, fixing accessories etc, are included in the scope of work. NOTE: Actual quantity to be measured by contractor before supply to avoid wastage in cut piece.
Supply and laying or fixing or passing thorugh pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed with stranded conductor 3.5 core 50 Sqmm nominal cross section in service connections. Material like joining material, catenary, GI wire, gland, fixing accessories etc, are included in the scope of work. NOTE: Actual quantity to be measured by contractor before supply to avoid wastage in cut piece.
Supply and laying or fixing or passing thorugh pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed with stranded conductor 3.5 core 35 Sqmm nominal cross section in service connections. Material like joining material, catenary, GI wire, gland, fixing accessories etc, are included in the scope of work. NOTE: Actual quantity to be measured by contractor before supply to avoid wastage in cut piece.
Indoor Terminal jointing of 3.5 core 95/50/35 sqmm PVC/A cable by compression type brass cable gland, lugs, crimping type sockets, tapes etc complete.
Digging of hard/soft soil, floor/brick floor/cement floor of 75 cms approx of depth below the ground for laying of 3 run of 3.5Cx300 sqmm cable, spreading sand, laying of above cables, again spreading sand, brick protection of individual cable and then refilling of the excavated area and making smooth finish.
Point wiring for one light point or one fan point controlled by one switch with 1.5 sq mm size stranded Copper conductor PVC sheathed cable in PVC/delta conduit of the following with M&L as per technical specification in MES SSR and EIC instruction.
Wiring for circuit/submain wiring alongwith earth wire with the 2x2.5 sq mm + 1x1.5 sq mm sizes of FR PVC insulated copper conductor, in PVC casing caping, single core cable in surface/ recessed as required S&F (from MCB distribution board to switch board or AC socket).
Supply, fixing and electrical connection with copper wires/cables of modular switch 1 way 6 A, 1 module.
Supply, fixing and electrical connection with copper wires/cables of modular switch 1 way 16 A, 1 module.
Supply, fixing and electrical connection with copper wires/cables of modular socket 6A, 2/3 pin (i.e. 5 Pin) combined, 2 module.
Supply, fixing and electrical connection with copper wires/cables of modular socket 6/16A combined, 2 module.
Supply, fixing and electrical connection of Modular 20/25 Amp Single Phase Motor Starter Swich 240V A.C. (4HP), 2 module.
Supplying and conceal fixing unbreakable modular switch box(GI) 12 module with module cover & frame with necessery blanking plates etc., for additional gaps. For conceal fixing works like wall breaking, plastering, smooth finish etc. is inclueded in the scope of work.
Supplying and conceal fixing unbreakable modular switch box(GI) 6 module with module cover & frame with necessery blanking plates etc., for additional gaps. For conceal fixing works like wall breaking, plastering, smooth finish etc. is inclueded in the scope of work.
Supplying and conceal fixing unbreakable modular switch box(GI) 2 module with module cover & frame with necessery blanking plates etc., for additional gaps. For conceal fixing works like wall breaking, plastering, smooth finish etc. is inclueded in the scope of work.
Supply & fixing of LED tubelight fitting, 18-20 Watt, 4000K, 4 feet length, 230V with complete all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size as per directon of EIC
Supply & fixing 34-36 Watt 5700-6000K LED with prismatic optics recess mounting Luminaire set Flat panel of size 600x600 mm approx suitable for armstrong/grid ceiling complete with electronic driver & high brightness SMD LEDs.
Supply & Installation of heavy duty exhaust fan (Industrial type) with all electrical accessories for operation with Single phase supply as per following specification: 1. Sweep 300mm, 2. Blade - 3 to 4 , 3. Speed - 1400 rpm approx, 4. Supply Voltage - 240V 1phase, 6. Make - Calcutta/ EPC/Almonard/Crompton/Havells.
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I.
Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
NITpDF-QC.pdf
TENDER_DOCUMENT • 0.12 MB
PreQualification-QC.xlsm
TENDER_DOCUMENT • 0.03 MB
PriceBid-QC.xlsm
TENDER_DOCUMENT • 0.04 MB
PriceBidpDF-QC.pdf
TENDER_DOCUMENT • 0.04 MB
TenderDocumentpDF-QC.pdf
TENDER_DOCUMENT • 15.22 MB
UndertakingpDF-QC.pdf
TENDER_DOCUMENT • 0.01 MB
PreQualificationpDF-QC.pdf
TENDER_DOCUMENT • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .