Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance 77 KAILASH PURI BIKANER RAJASTHAN PIN 334001 | BIKANER | RAJASTHAN | 334001 | Admitted-Finance |
| 2 | Admitted-Finance PANCHAYATI RAJ ROHTAK | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
| 5 | Admitted-Finance | Admitted-Finance |
Tender Value
₹7.5 L
EMD Value
₹15,000
Closing Date
25 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) R AND D JODHPUR
AGE (I) R AND D JODHPUR, Defence Laboratory, Ratanada Palace, Jodhpur- 342011
WELCOME MAINT TO MD ACCN IN ZONE-A AND ZONE-C AT DEFENCE LAB JODHPUR
2022_MES_528129_1
8472/E8
Open Tender
Civil Works
Item Rate
270 days
AGE (I) R AND D JODHPUR
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
AGE (I) R AND D JODHPUR
₹15,000
Yes
27 Jun 2022
2 Jun 2022
27 Jun 2022
2 Jun 2022
25 Jun 2022
11 Jun 2022
3 Jun 2022 - 10 Jun 2022
60 days
Amount
M&L preparing old distempered or colour wash surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soof, moulds, moss and efflorescent salts and trading oil and greasing spots and applying one of distemper oil emulsion of approved tint complete all as specified & directed by Engineer-in-charge.
M&L preparing old distempered or colour wash surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soof, moulds, moss and efflorescent salts and trading oil and greasing spots and applying one coat of distemper oil emulsion of approved tint complete all as specified & directed by Engineer-in-charge.
M&L preparation of old plastered surfaces of walls by complete removing existing treatment and applying two coats of distemper oil emulsion of approved tint over and including a coat of birla white wall care putty 2 mm thick to get a uniform smooth surfaces complete all as specified & directed by Engineer-in-charge.
M&L preparing old painted wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (Approved tint) complete all as specified & directed by Engineer-in-charge.
M&L preparation of old painted steel surface of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint (Approved tint) complete all as specified & directed by Engineer-in-charge.
Taking down cement or cement lime plaster, any description on brick or stone walls/ceilings etc including racking out joints, hacking for key, scrubbing down with water etc removal of rubbish off the premises, removal and depositing where directed and leaving the more clean of any plastering complete all as specified and directed by Engineer-in-charge.
M&L 15 mm thick , plaster in cement mortar (1:6) on stone masonry wall surfaces or surfaces other than fair faces of brick work or one side of lathing and finishing the surface even and smooth without using extra cement complete all as specified & directed by Engineer-in-charge.
M&L preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion of approved tint over a coat of primer complete all as specified & directed by Engineer-in-charge.
M&L rendering 5 mm thick plaster in cement mortar (1:3) on concrete surfaces of ceiling and finishing the surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.
M&L preparation of newly plastered surfaces of ceilings and applying two coats of distemper oil emulsion of approved tint over a coat of primer complete all as specified & directed by Engineer-in-charge.
S&F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aparture 1.40mm and fixed with stainless steel wire stapples complete all as specified & directed by Engineer-in-charge.
Hacking out old broken glasses (any thickness, size, quality or description) from steel/wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads etc complete all as specified & directed by Engineer-in-charge.
S&F 3mm thick, sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each panes complete all as specified and directed by Engineer-in-charge.
S&F 3mm thick, ground or obscured or frosted, on one side and glazing with oil putty in squares not exceeding 0.50 Sqm in each panes complete all as specified and directed by Engineer-in-charge.
m/s Firoz khan
SHRI BHIKSHU ART AND CONSTRUCTION CO
HOODA CONSTRUCTION COMPANY
GB Group & Co
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .