WELCOME MAINTENANCE TO OFFICERS MD ACCN IN NORTHERN AND CENTRAL SECTOR INCLUDING INTERNAL ELECTRIFICATION AT MILITARY STATION KOTA

Amount

Taking down cement plaster of any description and thickness on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

Hacking out old broken glass (any thickness size, quality or description) from wooden frame, glazing with putty or fixed with beads complete all as specified and directed.

M&L for 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

M&L for figured glass, 3 mm thick, pin head type and glazing with oil putty in squares not exc. 0.50 Sqm in each pane complete all as specified and directed.

Taking up or down existing GI tubing and connections, including making good the disturbed surface for 15 mm dia pipes complete all as specified and directed.

Taking up or down existing GI tubing and connections, including making good the disturbed surface for 20 mm dia pipes complete all as specified and directed.

Taking up or down existing GI tubing and connections, including making good the disturbed surface for 40 mm dia pipes complete all as specified and directed.

Supply, fixing, laying & testing galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors including making good the disturbed surface with cement conc. 1:2:4 and rendering to match the surface complete all as specified and directed for the following bore of pipes: - a) 40 mm bore

b) 20 mm bore

c) 15 mm bore

All as per item 8 herein before but except GI pipes (GI pipes obtained from taking down shall be reused under this item), complete all as specified and directed for the following bore of pipes: - a) 40 mm bore

b) 20 mm bore

c) 15 mm bore

S&F 1000 Ltrs capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position including dismantaling existing water tank of any type, complete all as specified and directed.

S&F in repairs stop valves, fancy type, chromium plated brass with long shank and cup (Concealed type), screwed down, high pressure, both ends screwed to iron pipe or for union, dia of pipe 15 mm, complete all as specified and directed.

S&F in repair bib taps, cast copper alloy, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

S&F in repairs PTMT alloy toilet cabinet with mirror of overall size 350x450 mm and fixed to wall complete all as specified and directed, complete all as specified and directed. Make - India Prayag cat part No. 551

S&F in repair vitreous china wash hand basin white with flat back of size 550x400 mm, excluding chain and plug, taps and porcelain stopper but incl PVC waste pipe of 32 mm bore, one pair of 600 mm long cast iron brackets, complete all as specified and directed.

S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest incl providing lime concrete bedding and connecting to flusing cistern complete all as specified and directed.

S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action top push type with inlet ball valve and float including taking down existing complete all as specified and directed.

M&L for preparation of old previously decorated plastered surfaces of walls and applying one coat of white wash, complete all as specified and directed.

M&L for preparation of old previously decorated plastered surfaces of ceiling and applying one coat of white wash, complete all as specified and directed.

M&L preparing old previously treated surfaces of walls, plastered or unplastered & applying one coat of distemper oil emulsion (washable) on walls including cornices, pillasters etc, complete all as specified and directed.

M&L complete removal of existing treatment from walls and applying 1.50mm thick layer of wall care putty (Birla/JK) and over it applying two coats of distemper oil emulsion (washable) over a coat of primer, complete all as specified and directed.

M&L for preperation of old painted surfaces of wood or wood based materials of any description not otherwise described exceeding 10cm in girth or width & applying one coat of synthetic enamel paint (Ist quality), complete all as specified and directed.

M&L for preparing old painted surfaces of steel or iron work of any description not otherwise described exceeding 10cm in width or girth & applying one coat of synthetic enamel paint (Ist quality), complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings n.exc 15 cm thickness (below or above GL), complete all as specified and directed.

M&L for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) as in flooring/sub base finished rough to receive floor finishes/screed complete all as specified and directed.

M&L for 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate), laid in panels, finished even and smooth using extra cement, complete all as specified and directed.

M&L 20 mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes complete and all as specified and directed.

M&L for non skid ceramic coloured tiles, 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, complete all as specified and directed.

M&L for rendering 15 mm thick on stone masonry surfaces or other than fair faces of brick work or concrete surface in cement mortar 1:4, surface finished fair and even, complete all as specified and directed.

M&L for rendering 15 mm thick on stone masonry surfaces or other than fair faces of brick work or concrete surface in cement mortar 1:6, surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 10 mm thick rendering on fair faces of brick/concrete surfaces of ceiling in CM 1:4 finishing surfaces even and smooth without using extra cement, complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450x350x6 to 7mm thick in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface complete all as specified and directed.

M&L for light coloured vitrified tiles, 10mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, complete all as specified and directed.

M & L for light coloured vitrified tiles 10 mm thick, laid as in dado/skirting, set and jointed in neat cement slurry and pointed in white cement or coloured cement to match the colour of tile, complete all as specified and directed.

M&L polished baroda green slabs, 18-20 mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of marble stone including grinding and polishing complete, complete all as specified and directed.

S&F in repair shower rose, chromium plated brass, fancy type, 125 mm size with swival joint, screwed to iron pipe or for union of 15 mm dia, complete all as specified and directed.

S&F in repair sink with draining board made of stainless steel 1mm thick with plugs, washers and waste coupling, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets of suitable angle iron, 32 mm dia superior quality PVC waste pipe and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 200 mm complete all as specified and directed.

S&F in repair mixing valve, chromium plated brass, centre hole basin mixer, screwed and jointed to PVC connection with nuts in wash hand basin, 15 mm bore, complete all as specified and directed.

S&F mixing valve, chromium plated brass, centre hole basin mixer, screwed and jointed to PVC connection with nuts in wash hand basin, 15 mm bore, complete all as specified and directed.

S&F in repair 15 mm bore CP brass wall mixer for mixing hot and cold water with two CP brass wall flange, screwed down for iron pipe and fixed, complete all as specified.

S&F in repair plastic water closet seat cover for EWC, white with recessed bottom and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair vitreous china water closet, pedestal pattern, white, excluding fixing bolts, flushing cistern and flush pipe, PVC seat cover etc, complete all as specified and directed.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 140 mm, complete all as specified and directed.

Disconnecting existing water tank of capacity exc. 250 ltr but not exc. 500 ltr, setting aside (or lowering of required) for repairs to roofs etc. and hoisting if required reconnecting and refixing in position on roof including cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipe etc., complete all as specified and directed.

All as per item 46 herein before but capacity of water tank exceeding 500 ltr but not exceeding 1000 litres each, complete all as specified and directed.

S&F in repair stop valve 20 mm nominal bore cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

S&F in repair stop valve 15 mm nominal bore cast copper alloy, chromium plated, fancy type, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

S&F pillar taps, cast copper alloy, with capston heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

S&F in repairs pillar taps, cast copper alloy, with capston heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

S&F in repairs ball valve 20 mm bore high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) complete all as specified and directed.

S&F in repairs stainless steel utensil plate rack of size 900x750x250 mm, made of 0.80 mm thick stainless steel sheet and fixed in position, design and pattern as approved by the GE, complete all as specified and directed.

Taking down chowkhat or frames not exc 1.50 Sqm each with shutters (without taking off shutters from the frame), complete all as specified and directed.

Taking down chowkhat or frames exc 1.50 Sqm and not exc 4.00 Sqm each with shutters (without taking off shutters from the frame), complete all as specified and directed.

Taking down shutters of any description not exc 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed.

Refixing of shutters exc. 1 Sqm but n. exc. 2 Sqm each in same or other opening after resecuring or easing and adjusting including renewal of screws etc. complete all as specified and directed

Refixing of shutters not exc. 1 Sqm each in same or other opening after resecuring or easing and adjusting including renewal of screws etc. complete all as specified and directed

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing, complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, complete all as specified and directed.

M&L for 35mm thick 2nd class hard wood (Sal) glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc, edges of framing plain, chamfered or rounded, fitted with cut or mitered beads, size of members of shutters as specified in clause 8.24(a) of SSR part I and fitted to chowkhats, complete all as specified and directed.

M&L for 35mm thick IInd class hard wood (Hollock/Bijasal) plain, framed panelled shutters (factory made), two panels, with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of stiles and rails as per IS-1003 (part I), kiln seasoned and chemically pressure treated, complete all as specified and directed.

S&F in repair 0.56 mm dia MS galvanised wire cloth with average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc., complete all as specified and directed.

S&F in repairs cupboard shutters of approved size/as required at site including frame made out of 0.80 mm thick mild steel sheet with frame, 50 mm wide including hinges, handles, locking arrangements etc, including applying two coats of synthetic enamel paint over a coat of primer with spray machine after preparing the surfaces, complete in all respect, complete all as specified and directed.

S&F mild steel framed work as in grills, grating etc. with end of bars shouldered and/or riveted, or forged into spikes: framed guard bars: barred iron doors: ladders: frame balusters: walk ways: railing: frame work of water tanks and similar works conforming to Fe-290 Grade-E-165, complete all as specified and directed.

M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, conforming to Fe 410 -W (GdeE- 250) quality A, complete all as specified and directed.

S&F steel windows or ventilators with side hung shutters including box type friction hinges, steel handle and steel peg stay, complete without glazing bars, including one shop coat of zinc chromate primer, complete all as specified and directed.

S&F steel windows or ventilators with side hung shutters including box type friction hinges, steel handle and steel peg stay, complete with glazing bars, dovetailed or welded including one shop coat of zinc chromate, primer complete all as specified and directed.

S&F steel ventilator with top hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded including one shop coat of zinc chromate primer, complete all as specified and directed.

S&F for 150 mm size aluminium anodised barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F for 150 mm size aluminium anodised barrel tower bolts of extruded section and fixed in repairs, complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S&F 100 mm long mild steel cold rolled med weight butt hinges, fixed with MS screws, complete all as specified and directed.

S&F in repairs 100 mm long mild steel cold rolled med weight butt hinges, fixed with MS screws, complete all as specified and directed.

S&F 125 mm long aluminium handles, cast type, anodised and fixed, complete all as specified and directed.

S&F 125 mm long aluminium handles, cast type, anodised and fixed in repair, complete all as specified and directed.

S&F in repair 300 mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed.

S&F in repairs 18/19 mm thick modular membrane kitchen cabinet door shutters (made out of MDF boards) in wood grain colour and half round edges, complete all as specified and directed.

S&F in repairs kitchen basket made of stainless steel, size 435x510 mm including stainless steel guide channel, complete all as specified and directed.

S&F in repairs ball catches with 8 mm dia steel ball and brass body andf striking plate including letting in and fixed, complete all as specified and dirceted.

S&F in repairs auto close hinges, stainless steel, bright finish or electro galvanised, complete all as specified and directed.

S&F in repairs 18/19 mm thick prelaminated MDF board, both side off white shade or shade as approved by Engineer in Charge, fixed as in shelf and partition of kitchen cabinet, complete all as specified and directed.

M&L applying 2 coats of synthetic enamel paint over a coat or pink primer on wooden surfaces, exceeding 10 cm in width or girth, incl preparation of the new surfaces complete all as specified and directed.

M & L for preparation of new or previously untreated steel surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M&L for cutting, grinding and rubbing to kota stone/marble/terrazzo flooring by mechanical means using carborandum stone to achieve granite finish including polishing with bees wax, complete all as specified and directed.

S&F in repair 32mm dia waste coupling of PTMT (half or full threaded) minimum weight not less than 45 grams, complete all as specified and directed.

S&F in repair 40mm dia waste coupling of PTMT (half or full threaded) minimum weight not less than 60 grams, complete all as specified and directed.

S&F in repair grating doom of 140 mm size, made of PTMT with or without waste hole (Minimum weight 50 grams), complete all as specified and directed.

S&F in repair grating doom of 125 mm size, made of PTMT with or without waste hole (Minimum weight 40 grams), complete all as specified and directed.

S&F in repair towel rail, 60 cm long of PTMT, fixed with and including CP brass screws and wooden/plastic cleats (Minimum weight 190 grams), complete all as specified and directed.

S&F PVC connection, 15 mm size with two PTMT nuts, length of connection 450 mm, complete all as specified and directed.

Dismantling cast iron or reinforced concrete concrete drain pipes 100 mm bore, jointed in CM and taking out from trenches if required, complete all as specified and directed.

S&F PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and laid in trenches/floor, complete all as specified and directed.

S&F PVC (SWR) bend 110 mm bore, any radius with oval access door, incl jointing to waste pipe with solvent cement, complete all as required and as directed.

S&F PVC (SWR) 110 mm bore branch pieces, single 'Y', equal or unequal, incl jointing to waste pipe with solvent cement, complete all as specified and directed.

S&F PVC (SWR) vent cowl 110 mm bore, incl jointing to waste pipe with solvent cement, complete all as specified and directed.

S&F PVC (SWR) floor trap, incl jointing to waste pipe with solvent cement, diameter of outlet is 75mm, complete all as specified and directed.

S&F in repair toilet paper holder of Vitreous China (white), box type , complete all as specified and directed.

S&F in repair continuous piano hinges, mild steel bright finish or electro galvanised, 30 mm width of flap when open, complete all as specified and directed.

S&F in repair Casement stays, size 300mm, with hinged joint and two plates, with studs, complete all as specified and directed.

S&F in repair 125 mm size Cast iron or malleable cast iron handles, cast type, stove enamelled black, complete all as specified and directed.

S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished, complete all as specified and directed.

S&F in repair 100 mm long hasp & staple safty type anodised aluminium with mild steel hinge pin bolt to hinge plate and fixed with screws, complete all as specified and directed.

S&F in repair stainless steel tubular curtain rods (Harrison rails), 20 mm dia, with fixing brackets, stops, rollers etc, complete all as specified and directed.

M&L preparing old previously treated surfaces of walls, plastered or unplastered & applying one coat of cement based paint (of approved tint) on walls including cornices, pillasters etc, complete all as specified and directed.

M&L for PCC 1:2:4 mix type B-0 (Using 12.5 mm graded stone agg) for roof padding, levelling course to receive floor finishes, pressed steel door frame filling etc, complete all as specified and directed.

M&L brushing neat cement slurry with 3.00 kg cement per Sqm, complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of RCC roof slab in CM 1:4 duly mixed with liquid water proofing compound @ 150 ml per bag of cement, finishing surfaces even and smooth without using extra cement, complete all as specified and directed. (Cost of liquid WPC shall be deemed included in the unit rates.)

M&L for cleaning of roof slab including picking, sweeping clean and washing down with water to remove dust, dirt etc and Supply and fix APP polymeric water proofing membrane, minimum 3mm thick and weighing not less than 3.0 Kg/Sqm, black finish, reinforced with non-woven polyester mat with a thermo fusable finish, laid over compatible bitumen primer @ 0.40 Kg/Sqm, torching overlaps with propane or butane gas torch, with an overlap of 75mm at the sides and 100mm at the ends and sealing, complete all as per manufacturer’s instructions, specified and directed. Note: (i) Coved fillets in PCC(1:2:4) type B-0 using 12.5mm graded stone aggregate, of radius 75mm shall be provided at the junction of roof and parapet wall/mumty/chimney/other vertical surfaces and thereafter surface painted with hot paving bitumen of Grade 30/40 confirming to IS-73, [email protected] Kg/Sqm over a coat of bituminous primer confirming to IS-3384 applied @ 0.40 Kg/Sqm.

Item 114.00 Contd……. (ii) Polymeric membrane shall be taken to a height of 45cm (minimum) and then inserted inside the groove of parapet wall of brick masonry and shall be finished by a membrane flushing. (iii) The waterproofing treatment shall be got carried out by the manufacturer or their authorized applicators. (iv) In case of stone masonry parapet wall etc a groove of size 25mmx25mm(minimuim) shall be made in coved fillet at the junction of roof and parapet wall/mumty Chimney/other vertical surfaces and polimeric membrane insterted in groove and sealed with paving bitumen. (v) Cost of these factors shall be deemed included in the unit rates.

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) 100 mm thick as in sub base, finishing the surface even & fair, complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size made with grey cement and pigment, confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade, laid over and including 25 mm thick sand cushion, complete all as specified and directed.

S&F 20 mm dia ball brass valve, high pressure with polythene float and fly nut, screwed down for iron pipe, complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for reuse or for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Dismantling unserviceable main switch/DBs incl wooden board and deposit to MES store yard including making good disturbed surface of wall complete all as specified and directed.

Disconnecting and taking down of unserviceable MCB's of any rating (To be measured only if being replaced without replacement of DB), complete all as specified and directed.

Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed sufaces to match with the existing surface, complete all as specified and directed.

Disconnecting and taking down unserviceable switch/sockets/lamp holder/ceiling rose, fan regulator/bell push etc, complete all as specified and directed.

M&L for Point wiring with PVC insulated (FRLS) unsheathed multi stranded copper conductor cable of size 1.5 Sqmm with PVC insulated (FRLS) unsheathed multi stranded copper conductor cable of size 1.5 Sqmm as earth continuity wire to be drawn in and including PVC casing capping not less then 20 mm width with MS sheet metal sunken switch/Terminal box 1.2 mm thick and phenolic laminated sheet cover 3.0 mm thick and brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as specified and directed for the following: - One light point/call bell point controlled by one, one way switch of 5/6 Amps.

One ceiling /exhaust fan point controlled by one, one way switch of 5/6 Amps. Note : - Rate for connection of fan to ceiling rose with PVC insulated 3 core flexible copper wire in white colour shall be deemed included in the unit rates.

One 3 pin 5 Amp socket outlet point on the same board with other switches.

One 3 pin 5 amps socket outlet point on independent board.

One light point controlled by two 2 way switches.

M&L Point wiring with PVC insulated (FRLS) unsheathed multi stranded copper conductor cable of size 2.5 Sqmm, with PVC insulated (FRLS) unsheathed multi stranded copper conductor cable FRLS of size 2.5 Sqmm as earth continuity wire to be drawn in and including PVC casing capping not less than 20 mm width with MS sheet metal sunken switch/Terminal box 1.2 mm thick and phenolic laminated sheet cover 3.0 mm thick and brass screws with cup washers for one socket outlet 15 amp on independent board including all necessary wall cutting and making good disturbed surface all as directed and specified. Note for item Nos. 7.10 to 7.60 & 8.00: Rate for wall cutting for switch/terminal boxes and making good disturbed surfaces to match with the adjoining surface shall be deemed included in the unit rate.

M&L Point wiring with PVC insulated (FRLS) unsheathed multi stranded copper conductor cable of size 1.5 Sqmm with PVC insulated (FRLS) unsheathed multi stranded copper conductor cable of size 1.5 Sqmm as earth continuity wire to be drawn in and including PVC medium grade concealed conduit not less then 20 mm dia with MS sheet metal sunken switch/Terminal box 1.2 mm thick and phenolic laminated sheet cover 3.0 mm thick and brass screws with cup washers including all necessary wall cutting and making good disturbed surface, complete all as specified and directed for the following: - One light point/call bell point controlled by one, one way switch of 5/6 Amps.

One ceiling /exhaust fan point controlled by one, one way switch of 5/6 Amps. Note : - Rate for connection of fan to ceiling rose with PVC insulated 3 core flexible copper wire in white colour shall be deemed included in the unit rates.

One 3 pin 5 Amp socket outlet point on the same board with other switches.

One 3 pin 5 amps socket outlet point on independent board.

One light point controlled by two 2 way switches.

Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 2.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable FRLS of size 2.5 Sqmm stranded for earth continuity wire, to be drawn in PVC medium grade concealed conduit not less then 20 mm dia with MS sheet metal sunken switch/Terminal box 1.2 mm thick and phenolic laminated sheet cover 3.0 mm thick and brass screws with cup washers for one socket outlet 15 amp on independent board including all necessary wall cutting and making good disturbed surface all as directed and specified. Note for item Nos. 9.10 to 9.60 & 10.00: Rate for wall cutting for switch/terminal boxes & chase cutting for concealing conduits and making good disturbed surfaces to match with the adjoining surface shall be deemed included in the unit rate.

S&F switch piano flush type 5/6 Amps, 230 volts, single pole, one way, complete all as specified and directed. (Make - Anchor, Cona, Havells).

S&F switch piano flush type 5/6 Amps, 230 volts, single pole, two way, complete all as specified and directed. (Make - Anchor, Cona, Havells).

S&F switch socket combination, 5 and 15 Amps, 230 volts, multi pin, flush type, universal, complete all as specified and directed. (Make - Anchor, Cona, Havells).

S&F switch socket combination, 5/6 Amps, 230 volt, multi pin, flush type, universal, complete all as specified and directed. (Make - Anchor, Cona Havells).

S&F Lamp Holder (ISI Marked) PVC/Polycarbonate body with back plate, suitable for batten fittings, complete all as specified and directed. Make: Anchor, Cona, Havells.

S&F Ceiling rose, surface bakelite, 65x20 mm, three terminal, complete all as specified and directed. Make Anchor, Cona, Havells.

S&F Call bell AC 230 Volts, single pole, ding dong sound, complete all as specified and directed. (Make-Anchor, Cona, Havells).

S&F bell push piano, flush type 5/6 Amps, 230 volts AC,single pole, complete all as specified and directed. (Make - Anchor, Cona, Havells).

S&F stepped type electronic fan regulator, flush type, 230 volts AC, single pole, humming free, fixed on the existing phenolic laminated sheet, complete all as specified and directed. (Make - Anchor, Cona Havells).

M&L for Sub main wiring power/circuit using PVC insulated (FRLS) unsheathed, stranded copper conductor cable, 2 Single core of size 2.5 Sqmm & earth continuity conductor of size 2.5 Sqmm to be drawn through and including PVC conduit of dia not less than 20mm, concealed in walls/roof/floors, complete all as specified and directed.

M&L for Sub main wiring power/circuit using PVC insulated (FRLS) unsheathed, stranded copper conductor cable, 2 Single core of size 4 Sqmm & earth continuity conductor of size 4 Sqmm, to be drawn through and including PVC conduit of dia not less than 20mm, medium Grade, concealed in walls/roof/floors, complete all as specified and directed. Notes for Sub main wiring: - (i) Two runs of sub main wire, one run of earth wire and one run of PVC conduit shall be measured as one unit. (ii) Rate for chase cutting for concealing PVC conduits and making good disturbed surfaces to match with the adjoining surface shall be deemed included in the unit rate.

S&F in repair LED Tube light fittings, batten type with bipin holders, powder coated steel with retrofit 20 watt LED tube, internally prewired, complete all as specified and directed. (Make: Havells/Bajaj/Syska/Philips)

S&F in repair LED building security light fitting, 20 watt, pressure die cast aluminium housing with IP 66 deg of protection, complete with 1.20 m long street light bracket made of 40 mm bore GI light grade tubing including necessary clamps, nuts, bolts, washers etc, complete all as specified and directed. (Make: Havells/Bajaj/Syska/Philips)

S&F MCB DB verticle type made of sheet steel, phosphatised powder painted, with neutral bus bar 200 A, neutral link, IP-43-IK09 protection grade, 415Volts AC, TPN with 4 way, Double door, complete all as specified and directed. Make: Havells cat part No. DSSDBX0223 or equivalent in ABB/Schneider/Siemens.

S&F MCB DB made of sheet steel, phosphatised powder painted, with bus bar 200 A, neutral link, earth bar and Din rail, 240 Volts AC, SPN with 8 way Double door, complete all as specified and directed. Havells cat part No DSSDBX0186 or equivalent in ABB/Schneider/Siemens

S&F MCB SPN 240 Volts, 'B' series, breaking capacity 10 KA of rating 6-32 Amps, complete all as specified and directed. Make: Havells/ABB/Schneider/Siemens.

S&F MCB SP 240 Volts, 'B' series, breaking capacity 10 KA of rating 6-32 Amps, complete all as specified and directed. Make: Havells/ABB/Schneider/Siemens.

S&F MCB TPN 240 Volts, 'B' series, breaking capacity 10 KA of rating 63 Amps, complete all as specified and directed. Make: Havells/ABB/Schneider/Siemens.

M&L for Earthing with galvanized steel earth plate electrode of size 600 mm x 600mm x 6.0 mm, buried directly in ground (earth plate not less than 2.25 Mtr below normal ground level) connected to galvanized earth lead strip of size 25mm x 4 mm by means of bolts, buts, check nuts and washers of galvanized iron on steel including 40 mm dia light grade GI tubing for protection of earth lead, MS sheet metal funnel with wire mesh, watering pipe medium grade 20 mm dia, charcoal or coke and common salt in alternative layer of 15 Cm compacted thickness all around the electrode with concrete earth pit of PCC 1:3:6 type 75 mm thick precast RCC (1:2:4) type B1 pit cover reinfored with 8 mm dia deformed bar and suitable handle made of 10 mm dia round bar including GI strip of size 25 mm x 3 mm for extension of earth lead and necessary excavation, earth work, in soft/loose soil and disposal of spolis to a distance not exc 50 Mtr and necessary connection and testing complete all as shown in electrical plate No. 3 and complete all as specified and directed.

Cutting chases pinning in, making good to facing where required and pointing in CM (1:3) to ends of edges of landings, shelves, cills, lintels etc and making good cutting, girth not exc 10 cm, in brick/RCC/stone walls, complete all as specified and directed.

Taking down old unserviceable ballast from tube light fitting and S&F new copper wound ballast suitable for 40 watt fluorescent tube light fitting, complete all as specified and directed.

SINGH ENTERPRISES

S.S Enterprises

L P Singh and Co.