NH5-Jasotikiri Road_Road_WBM Gr-III, PMC and Sealcoat, CC over laying _0.000 to 0.700 0.950 to 1.050

Flank dressing to proper camber etc.complete

Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified materials with in all lifts and lead upto 1000 metres etc complete.

Reworking or Rerolling the scarified bituminous surface suitably after supplementing the base materials with quarry dust and compacting finished surface.

Construction of Granular Sub Base Grading III material as per table 400-1 spreading in uniform layers with moto grader on prepared surface, mixing by mix in place method with rotavator at OMC & compacting with vibrator roller to achieve the desired density complete as per clause 401 of Mo SRT&H specifications for Road & Bridge works ( 4th revision)

Water Bound Macadam Sub-base/ base Providing laying spreding and compacting stone agregates of specific sizes to Water Bound Macadam specification including spreding in uniform thickness hand packing, rolling with 80-100KN roller in stages to proper grade & camber, applying & brooming, stone screening/ binding materials to fill up the interstices of course agregate watering & compacting to the required density as per technical specification Clause 405. WBM Gr-III

Providing ,scraping , cleaning the road surface ,applying tack coat using 3.0 kg of bitumenfor 10 Sqm & laying37.5mm thick built up spray grouting (BUSG) in one layer using 0.45 Cum of 25mm to 40 mm size hard granite metal & 12.0 kg penetratation grade of bitumen for 10Sqm in each layer with0.12cum of 12mmsize hard granite chips as key stone for 10 Sqmspreading over & laying including heating , pouring & spreading over & spreading bitumen ,metal ,chips & rolling with PRR including hire & running charges of PRR & all other machinaries Including running and hire charges of P.R.R as per direction of E.I.C (Data for 5889 Sqm)

Providing applying primer coat with bitumen on prepared surface of Granular base including cleaning of road surface & spraying primer @ 0.70-1.00kg/sqm using mechanical means as per technical specification clause 502

Providing applying tack coat with bitumen using emulsion distributor @ 0.30kg/sqm on prepared granular surface treated with primer & cleaned with hydraulic broom as per technical specification clause 503

Providing & laying 25mm thick SDBC with batch mix hot mix plant using crushed aggregate of specified grading, premixed with bituminous binder of 60/70 penetration grade, transporting the hot mix to work site, laying with a hydrostatic paver finisher wit censor control to the required grade, level, alignment, rolling with smooth wheeled, vibratory & tandem rollers to achieve the desired compaction as per clause 508 of MoSRT&H specification for road and bridge works (4th revision)