Construction of ESR for Zone-1 with laying of clear water distribution pipes and other ancillary works in accordance with SWAP III projects of Purusottampur NAC under State Plan

Design, Drawing, Construction, Commisioning & Testing On the Ground Reservoir OGR/ ESR including piping arrangements upto 5mtr. from external face with pile/ Raft foundation for following capacity for all work such as soil investigation,excavation,back filling & disposal of earth,RCC & PCC of required grade,shuttering,brick work,painting,finishing,connection pipes,valves fitting,expansion joint,expansion below,mechanical level indicator lightening arrestor including supply of all labours, materials T & P etc all complete as per the direction of Engineer-in-charge. (i) 3.50 lakh ltr capacity RCC ESR with staging ht. 15.0mtr

Laying of Distribution pipes Supplying all labour , T & P for dismantling 80mm thick interlock concrete colour paver block for laying of pipeline and stacking them for reuse after laying of pipeline as per specification and direction of Engineer-in-charge

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately

Cutting metalled road of grannualar course of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge.

Supplying all labour, T&P and earth work in excavation in all kinds of soil in pipe trenchs etc including dressing and levelling the bed and depositing the soil within 50M initial lead and 1.5M initial lift, as per the direction of the Engineer-in-charge. (i) In all kinds of soil

In hard rock granite

Supplying all materials, labour, T&P for providing and fixing close barricating for trenches and structure for safely purpose as per direction of Engineer - in- Charge. ( Both side of the trenches will be taken as one side for the purpose of measurement and payment i.e length of trench.)

Laying in trenches CENTRIFUGALLY CAST (SPUN) DUCTILE IRON PRESSURE, SOCKET & SPIGOT PIPES, CLASS - K9 WITHOUT CEMENT MORTAR LINING conforming to I.S. 8329 of the following nominal diameter as per specification, complete for push on rubber gasket jointing.., as per the specification, all complete as per direction of engineer-in-charge (Earth work in trenches jointing of pipes specials and fitting to be meausred separately) (Labour charges only) (i) For 250mm dia DI ( K- 7 )Pipe line

For 200mm dia DI ( K- 7 )Pipe line

For 150mm dia DI ( K- 7 )Pipe line

For 100mm dia DI ( K- 7 )Pipe line

Supplying all materials, labour and T&P for Providing Push-on-joints confirming to IS:3114 to centrifugally (Spun) Cast Iron Pipes or Ductile Iron pipes using rubber gasket conforming to IS:5382 of Styrene Butadene Rubber (S.B.R) quality , testing of joints,etc. all complete as per specification and direction of Engineer-in-Charge including supplying of all labour, material, tools & plants required to perform the work.[excluding cost of rubber gasket] (i) For 250mm dia DI ( K- 7 )Pipe line

For 200mm dia DI ( K- 7 )Pipe line

For 150mm dia DI ( K- 7 )Pipe line

For 100mm dia DI ( K- 7 )Pipe line

Laying in trenches C.I./D.I specials conforming to I.S.-1538 of the following diameter as per P.H. specifications including carriage of materials from store to work site etc complete.(excluding earth work in excavation,jointing and cost of specials)

Fixing cast iron DI Resilient Seated Glandless Gate Valve of RATING PN - 1.60(IS 14846/2000) with double flanged ends (with wheel) for water works purpose for the following rating & nominal diameters but (including cost of Sluice Valves) Make-VAG/Talis/AVK (i) 250mm dia D/F Sluice Valve (PN1.6)

200mm dia D/F Sluice Valve (PN1.6)

150mm dia D/F Sluice Valve (PN1.6)

100mm dia D/F Sluice Valve (PN1.6)

Supplying all materials, labour, and T&P for providing mechanical joints to flange socket as per relevant IS with suitable flanged joints and fitting & fixing of following in pipe as per specifications including testing with cost of all jointing materials, transportation to site etc. all complete as per the specifications and directions of Engineer-in-charge. (i) 250mm dia MJ Socket

200mm dia MJ Socket

150mm dia MJ Socket

100mm dia MJ Socket

250mm dia MJ Collar

200mm dia MJ Collar

150mm dia MJ Collar

100mm dia MJ Collar

Supplying all materials Labour & T&P for Fixing of Tamper proof Air Valve for water works purposes conforming to IS specification for the following nominal diameters as per specification complete including cost of Air valve. (VAG /Talis Make) (i) 25mm dia Tamper proof single Air Valve

50mm dia Tamper proof single Air Valve

Supplying all labour, T&P materials etc. and constructing brick masonry sluice valve chamber of following internal sizes :earth work in excavation in all kinds of soil; laying of 150mm thick CC (1:3:6) with crusher broken hard granite metal up to 4 cm size metal; 250mm thick brick masonry workin C.M (1:4) with fly ash bricks having crushing strength betgween 75 Kg/cmsq. 12mm thick cement plastering with CM(1:3) with punning for inside surfaces & out side plastering above GL & cement pointing below GL etc. all complete including precast Factory made Heavy duty RCC cover slab with Frame ( SD-20) made out of M30 concrete to with stand against 20 MT vehicular load as per the approved drawing if any and the direction of Engineer-in-charge. (i) S.V. chamber internal size:-[0.75x0.75x1.485mtr] for 200mm. to 300mm .dia. S/V.

S.V. chamber internal size:-[0.75x0.75x1.225mtr] for 80mm dia to150mm dia S/V.

Supplying filling in foundation & plinth with sand well watered & rammed including cost, conveyance, royalties, taxes all labour, T&P etc. all complete as per specification and direction of Engineer-in-charge. (i) Concrete and BT road

Supplying of all labour, T&P for Providing cement concrete (1:3:6) with 40mm size CBHG metal including cost of all materials, labour T & P etc. all complete as per specification & direction of Engineer-in-charge.(i) Concrete and BT road

Supplying all materials, labour T & P for providing C.C. (1:2:4) with 12mm. Size C.B.H.G. chips, in flooring including hoisting and laying etc. all complete as per specification and direction of Engineer-in- charge. (i) Concrete and BT road

Providing Supplying, fitting and fixing of 80mm thick interlock M-40 grade concrete colour paver block on compacted river coarse sand free from all organic materials and filling the joints with sand. including cutting corbelling, splays where ever necessary to proper size with cost, conveyance, royalties and taxes of all materials and cost of all labour, etc. complete in all respect conforming to IRC SP- 63:2018 as directed by Engineer in charge. (i) paver block to reuse labour charge only

new paver block including cost of Paver

Supplying all materials, labour, T & P for refilling the trenches with excavated materials within 50m initial lead and 1.5m initial lift etc. all complete.

Supplying all labour, T&P and removing surplus earth by mechanical means within 5 K.M radious etc all complete as per the direction of Engineer - in - charge.

Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium ) confirming to specification of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C. (i) 273 mm OD M.S. pipe 5mm thick

219mm OD M.S. pipe 4.5mm thick

168.3 mm OD M.S. pipe 4.5mm thick

100 mm dia M.S. pipe 4.5mm thick

250 mm dia M.S. Flange 12mm thick

200 mm dia M.S. Flange 12mm thick

150 mm dia M.S. Flange 12mm thick

100 mm dia M.S. Flange 12mm thick

250mm. X 90° MS bend plain

250mm. X 90° MS bend flanged

250mm. Dia.MS offset bend plain

250mm. Dia.MS offset bend flanged

200mm. X 90° MS bend plain

200mm. X 90° MS bend flanged

200mm. Dia.MS offset bend plain

200mm. Dia.MS offset bend flanged

150mm. X 90° MS bend plain

150mm. X 90° MS bend flanged

150mm. Dia.MS offset bend plain

150mm. Dia.MS offset bend flanged

100mm. X 90° MS bend plain

100mm. X 90° MS bend flanged

100mm. Dia.MS offset bend plain

100mm. Dia.MS offset bend flanged

Supplying all labour and T&P for Flame cutting of following dia MS pipe of following thick in trenches by gas cutter set of pocket etc all complete

Supplying all labour and T&P for Fillet welding at site etc all complete

Supplying of all labour, T&P and materials for Construction of Thrust Block with RCC M-20 of size - 0.75 x 0.75 x 0.75 as per drawing and specification and direction of Engineer incharge etc all complete (i) for 200mm & 250mm

Supplying of all labour, T&P and materials for Construction of Thrust Block with RCC M-20 of size - 0.75 x 0.75 x 0.75 as per drawing and specification and direction of Engineer incharge etc all complete (i) for 150mm & 100MM.

Supplying all labour, T&P for providing flanged joints to pipes including testing the joints etc. all complete as per PH specification and direction of Engineer-in-charge. (i) 250 mm dia M.S flange joint

200 mm dia M.S flange joint

150 mm dia M.S flange joint

100 mm dia M.S flange joint

SITE DEVELOPMENT at ESR site Supplying allmaterials , labour and T&P for cutting of earth and levelling the bed by mechanical means as per specification and direction of Engineer - in - charge

Supplying all materials , labour and T&P for bush cutting with dressing and levelling the bed by engaging mulia as per specification and direction of EIC

Supplying all labour, T&P and Excavation of founation in hard rock (granite) removed by chiselling including dressing and levelling the bed not exceeding 1.5m in depth and depositing the soil within initial lead of 50m and as per specification approved by the Department and direction of the Engineer-in-charge.

APPROACH ROAD ESR site Supplying all material , labour for Soling road surface with soling stone including filling the intertices with moorum and rolling with hand road roller( soling stone to be used from site development item no.3)

Admixing sand and crushed screened dust etc. complete including spreading and consolidation with hand road roller including watering

Supplying all material , labour for spreading metal to proper camber and consolidation with HRR including watering and turfedging including filling the intertices with moorum and rolling with hand road roller

Supplying of all labour,T&P and materials for Admixing sand and crushed screened dust etc. complete including spreading and consolidation with hand road roller including watering as per direction of Engineer in charge

COMPOUND WALL ( MBR and ESR site ) G RCC Framed Boundary Wall at WTP SITE Earth work in all kinds of soil within 50m. initial lead & 1.5m. initial lift including rough dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. in depth & as per direction of the engineer–in–charge

Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work site, payment of royalty, contractor profit & labour cess etc, all complete as per specification and direction of Engineer-in-charge.

Supplying all labour, T&P and providing Cement Concrete (1:3:6) using 4cm HBG crusher metal including watering curing, supervision conveyance of all materials to worksite, payment of royalty, taxes etc. all complete in F&P as per specification and direction of the Engineer-in-charge.

Supplying all labour, materials, T&P and providing Cement concrete M20 with crusher broken hard granite chips on 20mm size RCC works including cost of conveyance & royalty, sundries, watering, curing & lifting & laying concrete at a height of 5 mtr. Maximum, contractor profit & labour cess etc all complete etc all complete (Excluding cost of reinforcement & centering & shuttering)

Supplying all materials, labour, T&P and providing rigid and Smooth centering and shuttering for R.C.C. works including False work and dismantling them after casting including Conveyance of all materials to Work site, payment of royalty,contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge. (i) Column Base

Column

Supplying all materials, labour, T&P and providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and laying the grill and position including cost of binding wire 18 to 20 gauge, conveyance of all materials to Work site, payment of royalty, contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge (SAIL STEEL TMT-EQR 500/IS 1786 Fe 500 D)

Supplying all materials, labour, T&P and Providing Brick work with Fly Ash Bricks 23cm x 11cm x 8cm size having crushing strength not Less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar(1:6 ) in S/S including cost of conveyance & royalty, sundries & watering for curing & supervision charges, contractor profit & labour cess etc, all complete as per the direction of Engineer-in-charge.

Supplying all materials, labour, T&P and making 12mm thick cement plaster in cement mortar (1:6) for brick or stone masonry work for brick work including watering, curing, conveyance of all materials to worksite, payment of royalty, contractor profit & labour cess as per the direction of engineer-in-charge. (i) Outside wall

Supplying all materials, labour, T&P and making 16mm thick cement plaster in cement mortar (1:6) for brick or stone masonry work for brick work including watering, curing, conveyance of all materials to worksite, payment of royalty, contractor profit & labour cess as per the direction of engineer-in-charge.(i) Inside wall

Supplying all materials, labour, T&P and filling of foundation and plinth with excavated materials with all kinds of soil as per the direction of engineer-in-charge.

Supplying all materials, labour, T&P and providing Priming 1 coat with any appproved Primer including all materials, conveyance, contractor profit & labour cess etc, all complete as per the di

rection of Engineer-in-charge. (on Plastered surface)

Supplying all materials, labour, T&P and providing two coat of Weather Coats with any approved shades including cost of conveyance, brushes, sundries, contractor profit & labour cess etc all complete as per the direction of Engineer-in-charge

Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work site, payment of royalty, contractor profit & labour cess etc, all complete as per specification and direction of Engineer-in-charge.

Supplying all labour, T&P and providing Cement Concrete (1:3:6) using 4cm HBG crusher metal including watering curing, supervision conveyance of all materials to worksite, payment of royalty, taxes etc. all complete in F&P as per specification and direction of the Engineer-in-charge.

2 Leaf MS/SS Gate fixed with RCC Pillar Supplying of all labour, T&P for earth work in all kinds of soil within 50m. initial lead & 1.5m. initial lift including rough dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. in depth & as per direction of the engineer–in–charge

Supplying all labour, materials, T&P and providing Cement concrete M20 with crusher broken hard granite chips on 20mm size RCC works including cost of conveyance & royalty, sundries, watering, curing &lifting & laying concrete at a height of 5 mtr. Maximum, contractor profit & labour cess etc all complete etc all complete (Excluding cost of reinforcement & centering & shuttering)

Column

Supplying all materials, labour, T&P and providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and laying the grill and position including cost of binding wire 18 to 20 gauge, conveyance of all materials to Work site, payment of royalty, contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge (SAIL STEEL TMT-EQR 500/IS 1786 Fe 500 D)

Supplying all materials, labour, T&P and providing rigid and Smooth centering and shuttering for R.C.C. works including False work and dismantling them after casting including Conveyance of all materials to Work site, payment of royalty, contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge. (i) Column Base

Supplying all materials, labour, T&P and filling of foundation and plinth with excavated materials with all kinds of soil as per the direction of engineer-in-charge.

Supplying all materials, labour, T&P and providing Priming 1 coat with any appproved Primer including all materials, conveyance, contractor profit & labour cess etc, all complete as per the di

rection of Engineer-in-charge. (on Plastered surface)

6 mm thick cement plaster (1:4) to R CC surfaces finished smooth including closed deep chiping and slury treatment (i) Outside wall

Supplying all materials, labour, T&P and Fitting & Fixing of MS Gate providing 2 Coats of Enamel Paint on 2 Coats of Primer including cost of conveyance, brushes, sundries, contractor profit & labour cess etc., all complete as per the direction of Engineer-in-charge (i) 2 Leaf MS Gate (Size 6.0 M x 1.8 M Ht.)