Repairs to Principal Civil Court Building at Jodiya, Ta.Jodiya, Dist.Jamnagar

Name of Work :- Repairs to Prinicipal Civil Court Building at Jodia Taluka: Jodia Dist.

BILL OF QUANTITIES

Sr. No. Description of Item (With brief Quantity Unit Rs. In figure Amount

specification and reference to book of

specifications)

1 Dismentaling tiled of stone floors laid in 1087.00 Cum 50.27

mortar including stacking of serviceable

materilas and disposal of unserviceable

materials with all lead and lift.

2 Dismentling doors, windows, ventilators 14.00 Cum 196.65

etc. (wood or steel) shutters including

chowkhats architraves, holdfasts and other

attachment etc. complete and stacking

them within all lead and lift.(i) Not

exceeding 3 Sq.M. in area.

3 Dismantling santtary fittings like wash basin 18.00 Cum 424.09

. W.C. pan Indian and European type,

flushing tank etc. including stacking the

materials with all lead and lift.

4 Removing and scraping of old deteriorated 836.00 Cum 20.36

plaster of any thickness fromm wall / R.C.C

member including stacking of serviceable

material and disposal of unserviceable from

site of work with all lead and lift

5 Applying general insecticide pest control 1100.00 Sqm. 91.62

treatment to floors, cupboards etc

including labour materials etc. complete.

Using Imidacloprid 30.5 SCas Per IS

part -II (0.075% concentration by mass) is

recommended 10.5ml chemical diluted with

5 liters of water application 0.5 litre

chemical /Sqm of surface is recommended

6 Brick work using common burnt clay 4.00 Cum. 4568.40

building bricks having crushing strength

not less than 35 kg./Sq.Cm. in Super

structure in Cement Mortar 1:6 (1- Cement :

6 -fine sand)(B) Conventional

7 Providing 10mm thick cement plaster in 127.00 Sqm 124.83

single coat on brick concrete walls for

interior plastering upto floor two level and

finished even smooth in (i) Cement Mortar

1:4 (1-Cement:4-sand)

8 Providing 15mm thick cement plaster in 161.00 Sqm 184.68

single coat on brick concrete walls for

interior plastering upto floor two level and

finished even smooth in (i) Cement Mortar

1:3 (1-Cement:3-sand)

9 20mm thick sand faced cement plaster on 532.00 Sqm. 323.21

walls on height 10 metres above ground

level consisting of 12mm thick backing coat

of C.M. 1:3 (1-Cement:3-sand) and 8mm

thick finishing coat of C.M. 1:1 (1-Cement:1-

sand) etc. complete.

1 of 11 DTP of Court building at Jodia 08-26

Sr. No. Description of Item (With brief Quantity Unit Rs. In figure Amount

specification and reference to book of

specifications)

10 Providing 27mm thick stone wash cement 67.00 Sqm. 594.89

plaster using 2 to 4 no stone chips 1:1:2 and

colour pigment as required patter and

colour and grooves in two coats with 15mm

thick backing coat of cement mortar 1:3 (1-

Cement : 3- fine sand) and 12mm thick

finishing coat of stone wash in 1:1:2 (1-

cement : 1-dolimite power :2- stone chips of

2 to 4 nos. with colour pigment) on

brick/concrete wall exterior upto 10 Mt

height above ground level including curing

finishing line level etc. complete wall.

11 Providing and laying cement concrete 1:3:6 27.00 Cum 3266.34

(1-Cement:3-coarse 6-crushed stone

aggregates 40mm nominal size) and curing

complete excluding cost of formwork in (A)

Foundation and plinth

12 Providing and laying 25mm thick polished 495.00 Sqm. 1019.39

Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6

(1-cement : 6-coarse sand) or L.M. 1.1.5 (1-

Lime putty :1.5 – coarse sand) laid over and

jointed with grey cement slurry mixed with

pigment to match the shade of slab

including rubbing and polishing etc.

13 Providing and laying 20mm thick Pink 90.00 Sqm. 1361.48

dholpur stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6

(1-cement : 6-coarse sand) laid over and

jointed with pigment to match the shade of

slab etc complete.

14 Providing and Laying Chemical Water 1044.00 Sqm. 355.52

Proofing Treatment to Terrace & Wall or

Exposed Surfaces of Buildings with Asian

Damp proof Ultra or Berger Damp Shield

Elasto or Equivalent Chemical Compound

By Applying Single tiles Priming Coat And

Two Consecutive Finishing Coat as per

Directed By Engineer In-charge Including

Cleaning of Surface with Brooming,

Washing And Preparing Surface Free from

Dirt Etc Complete.

15 Providing and laying broken China Mosaic 230.00 Sqm. 779.69

Flooring for Terrace using 12mm to 20mm

broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to

be tempered to bring mortar crème out

upto surface using white cement including

rounding off junctions and extending them

up to 15cm. along the wall, clearing with

water and oxalic acid etc. as directed.

16 Removing dry or oil bound distemper by a 2884.00 Sqm. 11.81

washing and scraping and sand papering

the wall surface smooth including

necessary repais to scracthes complete.

2 of 11 DTP of Court building at Jodia 08-26

Sr. No. Description of Item (With brief Quantity Unit Rs. In figure Amount

specification and reference to book of

specifications)

17 Applying two coats of putty & two coats of 2884.00 Sqm. 40.59

primer of approved brand and manufacture

on new wall surface to give an even shade

including thoroughly brushing the surface

free from mortar dropping and other foreign

matter and sand papered smooth.

18 Wall painting (two coats) with plastic 2884.00 Sqm. 86.37

emulsion paint of approved brand and

manufacture on undecorated wall surface

to give an even shade including throughly

brushing the surface free from mortar

droppings and other foreign matter and

sand papered smooth.

19 Finishing wall with weather proof exterior 1732.00 Sqm. 122.13

emulsion paint on wall surface (two coats)

to give an required shape aeven shade after

throguhly brushing the surface to remove

all dirt, and remains of loose powdered

materials etc.comp.

20 Painting two coat (excluding priming coat) 191.00 Sqm. 117.55

on previously painted steel and other metal

surface with enamel paint brushing to give

an even shade including cleaning the

surface of all dirt, dust and other foreign

matter. for every subsequent coat of paint

21 Providing and laying Ceramic tiles 6mm 52.00 Sqm. 1017.30

thick in flooring treads of steps and landing

laid on a bed of 12mm thick cement mortar

1:3 (1-cement : 3-coarse sand ) finishing

with flush pointing in white cement.

22 Providing and laying coloured glazed tiles 220.00 Sqm. 1523.67

of the size 300 mm x 200 mm x 8 mm /

mm x 450 mm x 8 mm in skirting, risers of

steps and dedo on 10 mm. thick cement

plaster 1:3 (1 cement : 3 coarse sand) &

jointed with white cement slurry.

23 Providing and fixing sandwitch type 6.00 Sqm. 8439.56

platform of 75cm wide and 75cm high from

finished floor level using 25mm thick kotah

stone slab as a base and 18mm thick mirror

polished full round edged granite slab on

top , 25mm thick mirror polished /kotah

stone supports of 75cm wide at 45cm C/C

or as directed including providing /Granite

side 'Patta' of 30cm wide on three sides of

the platform as per detailed drawing and as

24 Providing and fixing special type wash 7.00 No. 2363.40

basin on counter top of size 591x397x397

mm or as required on site of CERA or

equivalent quality including pillar tap, Stop

cock etc. complete.

3 of 11 DTP of Court building at Jodia 08-26

Sr. No. Description of Item (With brief Quantity Unit Rs. In figure Amount

specification and reference to book of

specifications)

25 Providing and fixing water closet closet 5.00 No. 4685.39

squatting pan (Indian type W.C.pan /

Orrissa pan) size 580mm including Foot rest

G.I. inlet connection & C.P. Brass Flush

cock of 25mm dia. etc. comp.

26 Providing and fixing wash down water 3.00 No. 9429.36

closet (European type WC pan) Cera or

equivalent quality with PVC seat cover inlet

& outlet gasket, CI chair brackets including

concealed type flush cock of Jaquar or

equivalent quality with jet spray etc.

27 Providing and fixing flat back Urinal of 430 x 5.00 No. 3939.00

260 x 350mm size white colour including

necessary PVC waste pipe, PVC waste

coupling & 50mm C.P. Brass Stop cock

fitting all labour and materials.

28 Providing and fixing granite slab partition 7.00 Sqm. 3346.13

(18mm thick) incl. making in groove in wall

and fixed with cement mortar 1:3 (1-cement

: 3- coarse sand and jointed with grey

cement slurry including polishing both side

with single pieces as per size of partition

and moulding the edge etc. complete.

29 Cleaning of manholes by removing sludege, 10.00 No. 1161.50

dirt, waste etc from the manhole and

making it clean, fuctional including

disposing of the waste, making the work

site clean & fixing the existing manhole

cover as directed

30 Cleaning of Blocked drainage line 100mm to 160.00 Rmt. 94.94

150mm dia / size and making it clean,

fuctional (Only labour work)

31 Pro. & fix. stoneware gully trap with C.I. 4.00 No. 1246.92

grating brick masonry chamber & water

tight C.I. cover with frame 300 x 300mm

(inside) etc. with standard weight P type

square mouth trap 10 x 100mm (with cost of

32 Constructing brick masonry chamber for 5.00 No. 3417.71

underground C.I. Inspection chamber and

bends with briocks having croshing

strength not less than 35Kg. Cm2 in C.M.

1:5 C.I. cover with frame (Light duty)

455mm x 610mm intenal dimensions total

weight of cover with frame to be not less

than 38Kg. (Wt. of cover 23 Kg.) and Wt. of

frame 15Kg. ) (R.C.C. top slabe with 1:2:4

mix (1-cement :2- coarse sand :4-graded

stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick

with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls

and bed concrete etc. complete.(i) Inside

dimensions 455mmx 610mm and 650mm

deep for single pipe line.

4 of 11 DTP of Court building at Jodia 08-26

Sr. No. Description of Item (With brief Quantity Unit Rs. In figure Amount

specification and reference to book of

specifications)

33 Providing and fixing screw down stop tap of 10.00 No. 205.83

34 Providing laying and jointing in true line and 20.00 Rmt. 72.65

level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two

metre C/C or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the

same with adhesive solvent, including cost

of all materials.

35 Providing laying and jointing in true line and 30.00 Rmt. 91.84

level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved

by Engineer In Charge. Pipe shall be fixed

on the wall with the help of clamp at every

two metre C/C or shall be concealed as

directed including necessary fittings etc.

including testing of pipe and joints and

fixing the same with adhesive solvent,

including cost of all materials.

36 Providing laying and jointing in true line and 24.00 Rmt. 148.12

level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved

by Engineer In Charge. Pipe shall be fixed

on the wall with the help of clamp at every

two metre C/C or shall be concealed as

directed including necessary fittings etc.

including testing of pipe and joints and

fixing the same with adhesive solvent,

including cost of all materials.

37 Providing laying and jointing in true line and 36.00 Rmt. 195.67

level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two

metre C/C or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the

same with adhesive solvent, including cost

of all materials.

38 Providing and fixing PVC pipe of 6 Kg / F / 114.00 Rmt. 358.55

Sq.M. Water pressure polythene pipe of

90mm inside dia. high density complete

including fixing by clamps to wall including

making good the wall ceiling and floor etc.

39 Providing and fixing 15mm dia Gun metal 6.00 No. 186.83

check or Non return fullway wheel valve.

40 Providing and fixing 25mm dia Gun metal 6.00 No. 420.63

check or Non return fullway wheel valve.

5 of 11 DTP of Court building at Jodia 08-26

Sr. No. Description of Item (With brief Quantity Unit Rs. In figure Amount

specification and reference to book of

specifications)

41 Providing and fixing 32mm dia Gun metal 4.00 No. 314.73

check or Non return fullway wheel valve.

42 Providing and fixing 40mm dia Gun metal 4.00 No. 663.43

check or Non return fullway wheel valve.

43 Providing and fixing 50mm dia Gun metal 2.00 No. 1878.60

check or Non return fullway wheel valve.

44 Providing and fixing 15mm dia pillar tap, 2.00 No. 308.73

capstan head, screw down high pressure

with screws, shanks and back nuts.

45 Pro. & fix. S. S. Railway type push cock 4.00 No. 764.57

15mm dia with all labour & material etc.

46 Providing & supplying 75mm outer dia 6Kg / 25.00 Rmt. 216.14

Sqm low dencity capacity PVC Pipe with

necessary fitting etc. comp.

47 Providing and fixing PVC pipe of 6 Kg / F / 106.00 Rmt. 388.85

Sq.M. Water pressure polythene pipe of

110mm inside dia. high density complete

including fixing by clamps to wall including

making food the wall ceiling and floor etc.

48 Providing and fixing PVC pipe of 6 Kg / F / 150.00 Rmt. 485.81

Sq.M. Water pressure polythene pipe of

160mm inside dia. high density complete

including fixing by clamps to wall including

making good the wall ceiling and floor etc.

49 Providing and fixing 100mm dia PVC SWR 16.00 No. 588.26

Nahni Trap IS 14735 for drain with jali of

the following nominal diameter of self

cleansing design with C.I. Scrwed down or

hinged grating including the cost of cutting

and making good the walls.

50 Providing and fixing 5mm thick glass mirror 6.0 Sqm 2544.19

machine cut belveled edge mounted on wall

with special type wall touch SS mirror

bracket fixing with necessary plugs.

51 Providing erecting and fixing Tripal layer 3000.00 Ltr. 12.12

ISI water tank of required capacity each

with all necessary fittings , tank cover and

as required connection etc. complete on

52 Structural steel work ( Confirming to IS 2312.00 Kg. 131.83

4923-1997) riveted, bolted or welded in

builtup for all type sections, in framed work,

including cutting, hoisting, fixing in position

and applying a priming coat of approved

steel primer all complete as per the

structural designs and directions of

Engineer in charge.Column ( 122 x 61 x

6 of 11 DTP of Court building at Jodia 08-26

Sr. No. Description of Item (With brief Quantity Unit Rs. In figure Amount

specification and reference to book of

specifications)

53 Providing and fixing corrugated 106.00 Sqm. 356.53

semitransparent FRP sheet 2.00mm roofing

fixed with GI "J" or "L" hooks bolts and nets

8mm dia with bitumen washing filled with

white lead complete excluding cost of

purlins, rafters and trusses.

54 Repairs to Damaged alluminium section 106.00 Sqm. 707.00

Door window including replacing necessary

spares, such as screw. nuts, bolts, handles,

hinges, rubber lining, packing sheets etc.

and making the door window fuctional &

good looking, but excluding cost of glass,

door closer winding spring mosquitoes nets

etc. cost of all tools, plants, labour etc

including) (C) Alluminium section window

and Ventilation

55 Providing and fixing extruded aluminum 12.00 Sqm. 2140.33

window having extruded aluminum Colour

Powder Coated section frame main outer

size 127mm x 38.10mm x 1.35mm ,@

Wt.1.384 Kg/mt,horizontal Four track

member size 122.20mm x 31.75mm x

1.10mm @ Wt. 1.205 Kg/mt,vertical member

of size 122.20mm x 31.75mm x 1.50mm ,@

Wt. 1.398 Kg/mt with sliding shutters of

horizontal member size 40mm x 18mm x

1.29mm @ wt.of 0.456Kg/mt,vertical

member of size 40mm x 18mm x 1.29mm @

wt.of 0.456Kg/mt,@ with 5 mm thick

transparent bronze colour tinted float glass

with powder coated aluminum fittings and

fixtures and transparent silicon sealant

glass fixing to frame as per details etc

complete for window.

56 Repairs to doors and windows shutters incl. 69.00 Sqm. 684.78

repairing of broken components of teak

wood and providing missing components of

teak wood includi1g providing necessary

missing S. S . fixtures and fastenings and

touching with oil painting to match with

existing colour etc. Comp

57 Providing and fixing 30mm thick flush door 19.00 Sqm. 5442.89

solid core constuction of ISI quality both

side lamination including marble frame of

20mm thick with inner strip of 180x20mm

and outer strip of 150x20mm including

fixing with adhesive material to make the

door frame cutting 45" for vertical &

horizontal member include fixing the door

withal heavy type fixtures and fastenings

with mortise lock etc. comp.

7 of 11 DTP of Court building at Jodia 08-26

Sr. No. Description of Item (With brief Quantity Unit Rs. In figure Amount

specification and reference to book of

specifications)

58 Providing and fixing Galvanized wire jali 22.00 Sqm. 1452.38

having 45x45x6mm flat in square pattern

with 50cmx50cm 10 gauge Galvanized weld

mesh Jali including necessary Bolts, Hold

fast two coats oil painting and one coat of

primer etc completed.

59 Providing and placing portable cabin for 1.00 No. 76659.00

security guards size of 1200 x 1200 x

3000mm with top frame of M.S. square pipe

and bottom framed with I channel 4mm

thick , roof of 1.2mm thick GI sheet with

properly both side slope, false ceiling 8mm

thick MDF sheet and bottom flooring of

18mm thick cement sheet with 1.2mm PVC

vinyle carpet and window shall be of size

600 x 600mm with alluminium double

shutter type sliding with powder coating

with 4mm thick clear glass and door shall

be size of 2.5’ x 7’ with necessary wiring

and points and cabin fan and led tube light

and one light out side etc complete.

60 Providing and fixing alluminium section with 32.00 Sqm. 2908.80

powder coated partition using aluminium

section for frame 63x38mm including

peneling the lower half panel with 9mm

thick Eco board and upper half panels with

5mm tick sett glass including necessary

accessories etc. complete. (Panels should

not be more than 1.0 x 1.00Mt)

61 Providing and fixing anodized / poweder 6.00 Sqm. 6575.10

coated alluminium Double shutter Door

with side fixed window with 5mm thick glass

top rail and 12mm thick both side

laminatged particale board to bottom

pannel to shutter and side window pivoted

with floor spring of hard win or equivalent

quality Alluminium anodised section door

with framed of 101.16 x 44.45 x 2.01mm and

shutter 85.00 x 44.25 x 1.80mm style top

bottom rail and top fixed ventilator of fully

glazed with using 5mm thick transperant

approved quality of glass locking

arrangement including all anodised

alluminium fitting and fastening etc. comp.

as directed and as per detailed

8 of 11 DTP of Court building at Jodia 08-26

Sr. No. Description of Item (With brief Quantity Unit Rs. In figure Amount

specification and reference to book of

specifications)

62 LOW HEIGHT PARTITION (5' HEIGHT) 30.00 No. 4065.25

Providing & fixing Aluminum partition system

1500mm ht. made of 60mm thk aluminum having

two separate race way for lying electrical &

computer wiring. The wire management shall be

through to the race way to be filled at bottom

and other in intermediate of partition, below of

work surface. The connection L, T, + should be

made through an aluminum square of 60.5 mm in

1.4mm mm thk. The square section should have

a bottom leveler plate of Zinc die cast and should

accommodate End trim (PVC) to cater +’, -‘and

T’ type of configurations in desired color. The

top of the square should be covered with a

square cap made of PVC. All the end trims of the

partitions should be provided with a decorative

colored Plastic Beeding inserted in to the

powder coated aluminum sections in order to

enhance its look. All aluminum section /

component should be epoxy powder coated as

per IS: _ 733:1983 Laminated / Marker region

should made of 4mm Prelam MDF Board. Fabric

magnetic region should be made 4mm plain MDF

with .63mm G.I. Sheet with fabric wrapped on

both side. Fabric Pin-Up board should be made

of high quality 12mm Pin-Up board wrapped with

fabric Polyester 340grm/line Mtr on both

sides.as per instruction of the consultant.

63 Providing and Fixing Curtain make with 58.00 Sqm. 2323.00

100% poly fil fabric of 85 GSM (± 0.05)

thickness selected by architech & stitching

and fixing with required size of Channels

arrangement and required nos of S.S.

finished support of approved shape &

quality inclusive of all necessary fixtures,

fasteners and fitting, material & all labour

charges etc. complete or as directed by

64 Making Any Size of hole or as required on 30.00 No. 929.20

site in RCC beam with core cutting for

passing of drainage pipe.

65 Providing and fixing frame type CB shutter 60.00 Sqm. 5226.75

of 18mm thick water proof plywood with

1.00mm ISI quality 1.0mm lamination for

outside of frame and cupboard and

0.80mm thick lamination to inside of

cupboard including necessary , hydraulic

type S.S. hinges , fixtures , fastenings of

standard quality S.S. with locking

arrangement etc complete as per detail

drawing and as directed by Engineer-in-

66 Providing and fixing stainless steel railing 12.00 Rmt. 4878.30

having hand rail 850mm height and of 50mm

dia and baluster 32mm dia at 90 cm C/C and

4 horizontal pipe of 19mm dia at required

spacing as per design and SS having

grade and 18 guage pipe including

fastening, hold fast, clumps, coach bolts

9 of 11 DTP of Court building at Jodia 08-26

Sr. No. Description of Item (With brief Quantity Unit Rs. In figure Amount

specification and reference to book of

specifications)

67 Providing and fixing stainless steel railing 12.00 Rmt. 2265.43

at 850mm height and of 50mm dia SS pipe

with support of horizontal pipe as 15mm dia

at required spacing as per design and SS

having 304 grade and 15 guage pipe

including fastening, hold fast, clumps,

coach bolts for fixing to wall including

touching finishing to wall etc complete.

68 Pro. And fixing Nylon Pigeon net by fixing 78.00 Sqm. 314.11

with SS hook in Balcony, OTS, Stair etc.

69 Repairs to ventilation by fixing with glass 49.00 Sqm. 325.22

strip & G.I. jali fixing with wooden strip etc

70 Providing and fixing RBT fencing with 333.00 Rmt. 371.68

punched tape concertina upto 3 m height of

wall with angle iron ‘Y’ shaped 40 x 40 x

5mm placed 2.4 m or 3.00 m apart and with

6 horizontal R.B.T. reinforced barbed

wire,stud tied with G.I. staples and G.I.

clips to retain horizontal, including

necessary bolts or G.I. barbed wire tied to

angle iron, all complete as per direction of

Engineer-in-charge, with reinforced barbed

tape(R.B.T.) / Spring core (2.5mm thick)

wire of high tensile strength of 165 kg/

sq.mm with tape (0.52 mm thick) and weight

43.478 gm/ metre. (Cement concrete for

fixing angle will be paid under seperate

71 Providing and fixing Alluminium window 13.00 Sqm. 2439.15

diamond mesh with Alluminium powder

coated Frame with G.I. mosquito jali with all

fastening and fixtures etc complete.

Total Rs. Rs.4925599.98

Note: Fix Deduction of Credit of Dismental Materials Rs.6400 will be deduct from 1st RA bill.

Amount of my tender work out as under

I / We am/are willing to carry out the work at ………………………………………….. % above / below Percent [should be

written in figures and words] of the estimated rates mantioned above. Amount of my/our tender works out as under

Estimated Amount Put to tender: Estimated Amount Put to tender:

Deduct % below Add % above

Net Rs. Net Rs.

In words : In words :

Signature of Contractor

Deputy Executive Engineer Executive Engineer

Dhrol (R & B) Sub Division Jamnagar (R & B) Division,

Dhrol. Jamnagar.

10 of 11 DTP of Court building at Jodia 08-26

Sr. No. Description of Item (With brief Quantity Unit Rs. In figure Amount

specification and reference to book of

specifications)

1) The work shall be carried out as per Public Works Department Hand Book, I.S. Specification

and other specification of the Division or as Directed.

2) All the columns in Schedule should be filled in INK and the total of the entries in the last

column should be strike out by the Contractor under his Signature.

3) Rates should include clearance of site (Prior to commencement of work and its close) in all

respect and good for work under all conditions of site moisture weather etc.

4) The Contractor shall exhibit the details of works, Tenders amount and specification as per

Govt. Circular No. TD 32772 N. Dt. 26-4-78 and as per G.R. No. TNC-9-24-C, Dt. 18-11-91, as

directed by Engineer-in-Charge of the works, on board at site of the work.

5) Contractor shall even "NIL" percentage, if no deduction is offered.

6) Testing of materials shall be as per statement attached with the specification. The material

shall be tested in GERI Bill for the testing shall be paid by the Executive Engineer and 1% of

amount put to tender after deducting the cost of materials to be supplied by Department as

per SCHEDULE 'A' at the sanctioned estimate rates from the Contractor in Running Bills. (As

per G.R.No. (R&B) TNC-1085/4/C Dt. 20-12-91 and modified ide (R&B) Deptt. Circular No.

7) For R.C.C. Item where there is change of grade mix or charge as per actual mix design the

difference of cement consumption shall be deducted from rate of original item at the rate of

star rate mentioned in the tender.

8) 1% L.C. shall be deducted from the bill as per agreement.

9) GST will be paid extra as per Govt. Emendment.

10) GST and Income tax will be deducted at source while making payment of bills

Signature of Contractor

Deputy Executive Engineer Executive Engineer

Dhrol (R & B) Sub Division Jamnagar (R & B) Division,

Dhrol. Jamnagar.

11 of 11 DTP of Court building at Jodia 08-26