Loading…
Loading…
Tender ID
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical Admited |
| 2 | Accepted-Technical BAGWARA BAGWARA BAGWARA BEGUSARAI BEGUSARAI BIHAR 851218 | BEGUSARAI | BIHAR | 851218 | Accepted-Technical Admited |
| 3 | Accepted-Technical | Accepted-Technical Admited |
Tender Value
₹3.4 L
EMD Value
₹6,844
Closing Date
9 Mar 2026, 6:00 pmClosed
PRADHAN FULBARI-II GRAM PANCHAYAT
Fulbari-II Gram Panchayat, P.O. Fulbari-II, Dist.-Jalpaiguri, PIN-734015, West Bengal.
CONSTRUCTION OF BURNING GHAT WITH WAITING SHED AT PASCHIM DHAMNTALA BESIDE MAHANANDA RIVER UNDER FULBARI-II GRAM PANCHAYAT WITH IN RAJGANJ BLOCK, DIST-JALPAIGURI , FUND-OWN FUND (SL. No.-07)
2026_ZPHD_1015590_7
06/ OWN SOURCE/Full-II/2025-26 DATE-26.02.2026
Open Tender
CIVIL WORKS
Percentage
45 days
FULBARI-II GRAM PANCHAYAT AREA
Please refer Tender documents.
5 documents required · 5 mandatory
₹500
PRADHAN FULBARI-II GRAM PANCHAYAT
₹6,844
22 May 2026
26 Feb 2026
12 Mar 2026
26 Feb 2026
9 Mar 2026
26 Feb 2026
Earthwork in excavation of foundation trenches or drains in all sorts of soil including removing, spreading or stacking the spoils within a lead of 75m as directed including trimming the sides or trenches, leveling, dressing and ramming the bottom, bailing out water etc, as required complete.
Earthwork in filling in foundation trenches or plinth with good earth in layers not exceeding 150mm including watering, ramming etc, layer by layer complete. a)With earth obtained from excavation of foundation.
(iv) With carried earth arranged by the contractor within a radius exceeding 5 km. but not exceeding 10 km. including cost of carried earth.
Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling the joints with powdered earth or local sand.
Cement Concrete with 30mm down graded Shingles excluding shuttering. (II) Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety (a) 1:3:6 proportion
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (ii ) River Bazree
125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.
Artificial stone in floor, dado,stair case etc with cement concrete (4:2:1) with stone chips, laid in panels as directed with topping made with ordinary or white cement and marble dust in proportion (2:1) including smooth finishing and rounding off corners and including application of cement slurry before flooring work before using cement @ 1.75kg/sqm all complete including all materials and labour . 25mm thick.
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (a) 25 mm to 30 mm thick wooden shutteringb as per decision & direction of Engineer-In-Charge.
With out staging in foundation and plinth.
Reinforcement for reinforced concrete works in all sorts of structure including distribution bars, stirrups, binders etc, including supply of rods, initial straightening and removal of loose rust (if necessary) cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 g black annealed wire at every intersection, complete as per drawing and direction. a) For works in foundation, basement and upto roof of ground floor.
Plaster (to wall floor, ceiling etc) with sand cement mortar including rounding off corners or as directed and racking out joints or roughening off corners surface. ii) With 4:1 cement mortar. i) 10 mm. thick plaster - Lum Sum ( Details in bill )
Neat cement punning about 1.5mm thick in wall dado, windowsills, floor, drains etc.
Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer"s specification: (b) Two coats (on new works only).
M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. b) Span upto 12 Mtr Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part
Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor) b) With 0.63 mm thick sheet
Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor) b) With 0.63 mm thick sheet
Galvanised Iron sheet ridging fitted with necessary bolts screws,, washers, etc complete (225 mm end lapping) 300 mm. lapping each way b) With 0.60 mm thick sheet
Asbestos corrugated (Trafford or similar approved quality) sheet (6 mm thick) work (excluding the supporting framework) fitted and fixed with 9.5mm. dia. J or L hook-bolt and nuts, limpet and bitumen washers and putty with 150 mm end lap & one corrugation minimum side lap complete. (Payment should be made on area of finished work)
Asbestos ridging (with standard lap) fitted and fixed with necessary hook, bolts, nuts, washers, etc. complete. (a) Close fitting adjustable type
Supplying, fitting, fixing in position rails on any surface. Kg
Supplying fitting and fixing of Signboard and cost of photograph (payment will be made as per voucher)
Adding GST @ 18%
Adding Cess @ 1%
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.92 MB
BOQ_2494826.xls
BOQ • 0.40 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .