PWD/SE/KEC/NIT-06/19-20

Amount

Supply and Delivery of Hooded type Service Piller Box-1 of size 1425x1000x500mm with both side opening & accessable door and locking arrangement made of 5mm M.S plate fixed to be on massonary base as per dirrection of EIC. The box should be comprising of the following accessories: 1) S & F 415V, 160A ,TPN SFU with 3nos Fuse link ---1no. as incoming 2) S&F 160A Kit-Kat Fuse with Base-- 3nos 3) Diode type neon Indicator Lamp (R,Y,B)-3nos 4) 6A SP 10KA Control MCB -- 2nos 5) Neutral Link -- 2nos 6) S&F 415V, 63A TPN SFU with 3nos Fuse link-- 3nos 7) S&F 415V, 32A TPN SFU with 3nos Fuse link-- 2nos 8) S & F 415V, Busbar- 40x06 tinned copper for each phase and neutral 9) S & F Time switch GIC make type FM quartz----2nos 10) S & F 3-Pole power contractor -2nos 11) Auto/Manual Toggle switch ---2no 12) S & F 415V, 300A, capacity 4 way Bakelite terminal AC/DC make ---5nos 13) S & F 1/2" thick hylam sheet of size 1000x900mm ---1no The complete arrangement must be wiring by suitable size PVC insulated Cu wire (Make: Havells/Finolex/Polycab/RR Kable) with suitable sockets/lugs. (Make- L&T/Siemens/ABB)

Errection of Service Piller Box of above size on 10" brick padestal of 10" size 1200X1200X600mm (height 600mm below Ground level and 600mm above G.L) incl.sand cement plastering and neat cement finishing. Inside the brick padestal will be filled up by loose sand where the incoming & outgoing cable will be rest.

Supply and Delivery of Hooded type Feeder Piller Box of size 1425x1000x500mm with both side opening & accessable door and locking arrangement made of 5mm M.S plate fixed to be on massonary base as per dirrection of EIC. The box should be comprising of the following accessories: 1) S&F 415V, 63A TPN SFU with 3nos Fuse link ---1no. as incoming 2) S&F 415V, 32A TPN SFU with 3nos Fuse link-- 3nos 3) S & F 415V, 200A ,Copper busbar Chamber (40x6 for Phase & neutral)---1no 4) S & F Time switch GIC make type FM quartz----2nos 5) S & F 3-Pole power contractor -2nos 6) Auto/Manual Toggle switch ---2no 7) Diode type neon Indicator Lamp (R,Y,B)-3nos 8) S & F 415V, 300A, capacity 4 way Bakelite terminal AC/DC make ---3nos 9) S & F 1/2" thick hylam sheet of size 1000x900mm ---1No The complete arrangement must be wiring by suitable size PVC insulated Cu wire (Make: Havells/Finolex/Polycab/RR Kable) with suitable sockets/lugs. (Make- L&T/ Siemens/ ABB)

Errection of Feeder Piller Box of above size on 10" brick padestal of 10" size 1200X1200X600mm (height 600mm bellow Ground level and 600mm above G.L) incl.sand cement plastering and neat cement finishing. Inside the brick padestalwill be filled up by loose sand where the incoming & outgoing cable will be rest.

Supply & Delivery of 9 m height dip galvanised with PU painted octagonal pole made of HT steel of grade S355 of BSEN 10025 with 155 mm bottom A/F & 70 mm top A/F made up of 3mm thick G.I. sheet alongwith base plate of size 260 x 260 x 16 mm thick with inbuilt terminal box for cable connection as required (BOP-9030). Inclusive of Foundation bolt & 1.5 metre single Arm decorative Sword type Bracket. Also Bakelite sheet with one 6A SP MCB and 16Sqmm stud type connector is considered. Make - Utkarsh/Bajaj-BOP-9030/Jindal (From Dunlop to Sodpore RHS = 200nos, From Dunlop to Sodpore LHS = 200nos)

Erection of hot dip galvanized octagonal poles 9mtr including making RCC & PCC foundation including earth work in excavation of foundation pit, making RCC foundation and also including supply all materials e.g. cable entry pipes, anchoring bolts and nuts, washers, sand, cement, coarse aggregate, reinforcement rods etc and refilling of pit, duly rammed and finished complete as per direction of and up to satisfaction of EIC. Foundation Details:- R.C.C. foundation (1:2:4) dimension- 600 mm x 600 mm of total height 1600 mm in which 700 mm height will be above the ground level and 900 mm below ground level . P.C.C. Foundation - Just below the RCC foundation, a P.C.C. foundation (1:4:8) of dimension 1200 mm X 1200 mm of 400 mm height attached below the R.C.C foundation will be done.

Supplying ready mixed concrete of M20 Grade with well graded stone chips of 20 mm norminal size containing designed qty of cement per Cu. M of wet concrete produce in computerised batching plant under controlled condition using approved super plastisize , designing mix following I.S. 10262 and I.S . 456, transporting the mix with agitation in transit mixer to work site depositeing the mix on a platform erected for the purpose at required level of concreting and then placing the mix its final location of form work, compacting and curing the same complete as per specification & direction of Engineer- in-charge including computerized batching plant transit mixer with all accessories vibrators etc. inclusive of all other incidental of platform and its supporting. Extra concrete foundation at middle verge of existing road by M-20 Concrete using Upto Ground level (Bituminous Top Level) 500 mm X 500 mm X 1500 mm = 0.375 Cu.Mtr (per pole)

Supply and fixing of 240 Watt LED Light Fittings (Lumen efficiency not less than 120 lumen per watt), fixing with necessary fixing arrangement with five years warranty. (make- Philips, Model - BRP322 LED 240 CW MR FG S4xtfcl GR/similar spec of Crompton/Wipro)

Inter connection of LED/Metal/HPSV fittings by 2 x 1.5 Sq. mm. PVC insulated copper wire (Make: Havells/Finolex/Polycab/RR Kable) from pole loop box as per G.S.

Inter connection of Meter with Kit Kat Fuse by 1x35 Sq. mm. PVC insulated copper wire from pole loop box as per G.S.

Supply & Delivery of 4 core 25sqmm of 1.1 KV grade alluminium XLPE, PVC/ armoured LT cable (Make: Havels/Glowster/Crystal/Polycab/RR Kable) (For Service Pillar to Feeder Pillar)

Laying 4 core 25 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench (For Service Pillar to Feeder Pillar)

Supply & Delivery 4 core 16sqmm of 1.1 KV grade alluminium XLPE, PVC/ armoured LT cable (Make: Havells/Finolex/Polycab/RR Kable) (Pillar box to pole to pole)

Laying 4 core 16 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench (Pillar box to pole to pole)

Supplying & fixing medium gauge 50 mm dia GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing materials as required

PVC hard Pipe Protection Supplying & fixing medium gauge 50 mm dia PVC Pipe Protection with necessary fittings and jointing metarials as required

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below 4 core 25sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials 4 core 25sqmm

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below 4 core 16sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials 4 core 16sqmm

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By TATA-Medium GI pipe (Pole Earthing) each pole having 2nos separate earthing

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By TATA-Medium GI pipe (Service Pillar & Feeder Pillar Earthing)

Excavation of soil for installation of Earth Electrode and filling & ramming. For Morrum Soil.

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages with No. 4 SWG.

Micro tunneling including supply of HDPE pipe 40mm dia as per appropriate specification in single lengths for each individual tunnel.

Bituminious Road cutting by using Jac Hamour Compressor Machine, Fuel, Mobil, Compressor Operator and Three Breaker. N.B: (a) The Agency must procure the materials from the Manufacturer / OEM or from their authorized. Sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them. (b) Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution of work / submission of bill. (c) If any refurbished material is supplied and installed, penal action will be taken as per existing rules.

ROSHNI ELECTRICALS MFG CO

JADOB ELECTRIC CO.

RELIABLE CONSTRUCTION