Government Grant

NAME OF WORK :-CONSTRUCTION OF COMMAND CONTROL CENTRE AT CITY CIVIC CENTRE 5th Attempt.

Client :- Mansa Nagarpalika

NO DISCRIPTION OF ITEAM QTY UNIT RATE labour TOTAL total

Demolition and disposal of unserviceable

material with all lead and lift.(ii)R.C.C

work.item code no.20002,item no.20.3,page

Removing and scraping of old deterioted

plaster of any thickness from wall / R.C.C

member including stacking of serviceable

material and disposal of serviceable from site

of work with all lead and lift , Item No 0

Item Code 20045,page no 149 , s.o.r 2024-25.

Demolition of Brick work and stone masonry

including stacking serviceable materials and

disposal of unserviceable materials with all

lead and lift (ii) In Cement Mortar ,Item No

Dismentaling tiled of stone floor laid in

mortar including stacking of serviceable

materials and disposal of unserviceable

material with all lead and lift. Item No 20.23

Providing And Supplying TMT Bar And

Rebaring For Drilling , Fixing And Grouting

With Chemical Fixing etc as Per Requirement

5 Engineer In Charge.(Market Rate). 80.00 Nos 150.00 1.50 151.50

Providing and laying controlled cement

concrete M.250 and curing complete

including the cost of form work and

6 reinforcement for reinforced concrete work 3.62 Cu.m 8797.00 87.97 8884.97

in (D) Columns, Pillers posts and struts, upto

floor two level. (Rate Analysis)

Providing and laying controlled cement

concrete M.250 and curing complete

including the cost of formwork and

reinforcement for reinforced concrete work

in © Slabs, landing, shelves, Balconies,

Lintels, Beam, Girders and Cantilever upto

floor two level.(Rate Analysis)

Providing and laying controlled cement

concrete M.250 and curing complete

including the cost of formwork and

reinforcement for reinforced concrete work

in © Slabs, landing, shelves, Balconies,

Lintels, Beam, Girders and Cantilever upto

floor two level.(Rate Analysis)

Providing and laying cement concrete 1:3:6

(1- Cement : 3-Coarse sand : 6- crushed stone

aggregates 20 mm nominal size) and curing

complete including cost of formwork in (A)

Wall Caps / Coping , Item No 5.3.14 , Item

Code 05005A , page no 74 , s.o.r 2024-25.

Providing formwork of ordinary timber

planking so as to give a rough finish including

centering shuttering strutting and propping

etc. height of propping and centering below

supporting floor to ceiling not exceeding 4 M.

and removal of the same for in situ

reinforced concrete and plain concrete work

in. (H) (1) Sides and soffits of Beams Beam

Haunchings cantilevers Girders Bressumers

and Lintels not exceeding 1 M. in Depth

Item No 9.1 , Item Code 09001H1A , page no

Brickwork using common burnt clay building

bricks having crushing strength not less than

35kg/Sq.cm. In foundation and plinth in

Cement mortar 1:6 ( 1-Cement :6- Fine Sand )

(B) Conventional

Extra for brickwork in super structure above

floor two level , Item No 6.13(B) & 6.19 , Item

Code 06002BA & 06006B , page no 86 & 87

Providing and laying Vitrified tiles 8 to 10 mm

thick , 24'' x24'' in flooring treads of steps

and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand

finishing with flush pointing in white cement

Item No 14.29 (C1) , Item code 14008CA

page no 127 , s.o.r 2024-25.

Providing T.M.T. Steel Bar 500D

Reinforcement for R.C.C.work including

bending, and placing in position complete

upto floor two level , Item No 5.4.11 , Item

Code 05014C , page no 75 , s.o.r 2024-25.

Providing and fixing 35mm thick shutters for

Doors, Windows and clerstoy windows

including indian teak wood frames 12cm x

7cm including anodised alluminium fixtures

and fastenings including primer coat of

14 approved quality and two coats of oil 2.10 Sq.m 5133.69 51.34 5185.03

painting etc. comp.

(II) Fully Pannelled ,Item No 0 , Item Code

Providing and fixing FRP FRAME size 100 x

mm and 28 mm thick FRP degree panel

shutters having extra reinforcement on sides

and edges and in gel coat finish. The core of

the shutter is to be filled up with injected fire

retardant grade polyurethane form done in

situ along with embedded wooden pices for

stiffening and also for taking hingies and

fixtures. The whole FRP frame and shutter is

to be water proof, weather proof, terminte

proof and resistance to mild acid/alkali, rates

are to be inclusive of S.S> hinges with

necessary screws and alluminium fixtures

and fastenings & fastener sleeve , Item No 0

Item Code 10037 , page no 104 , s.o.r 2024-

Providing 15mm thick cement plaster in

single coat on Rough (Similar)side of single or

half brick walls for interior plastering upto

floor two level and finished even and smooth

in (i) Cement mortar 1:3 (1-cement:3-sand)

Item No 17.60 , Item Code 17002A , page no

Providing 20mm thick sand faced cement

plaster on walls upto height 10mt. Above

ground level consisting of 12mm thick

backing coat of C.M. 1:3 ( 1-cement : 3-sand )

17 and 8mm thick finishing cost of C.M.1 :1 ( 1- 169.99 Sq.m 312.56 3.13 315.69

Cement : 1-Sand) etc. complete, Item No

17.95 , Item Code 17009 , page no 137 ,s.o.r

Providing throating or plaster drip and

moulding to R.C.C. Chajja , Item No 5.4.18

Item Code 05018 , page no 75 , s.o.r 2024-25.

Applying two coats of putty & two coats of

primer of approved brand and manufacture

on new wall surface to give an even shade

including thoroughly brushing the surface

19 free from mortar dropping and other foreign 175.40 Sq.m 40.19 0.40 40.59

matter and sand papered smooth , Item No

, Item Code 19032 , page no 146 , s.o.r 2024-

Wall Painting (two coats) with plastic

emulsion paint of approved brand &

manufacture on under coated wall surface to

give an even shade including throughly

20 brushing the surface free from mortar 175.40 sq.m 82.36 0.82 83.18

dropping and other foreign matter and sand

papered smooth , Item No 19.57 , Item Code

Providing and laying broken chine mosaic

flooring for terrace using 12 mm to 20 mm

broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to

be tempered to bring mortar creme out upto

surface using white cement including

21 rounding off junctions and extending them 86.11 Sq.m 771.98 7.72 779.70

upto 15 cm along the wall,clearing with

water and oxalic acid etc. as directed , Item

No 0 , Item Code 14035 , page no 130 , s.o.r

Providing and fixing M.S. grills of required

pattern to wooden frame of windows with

M. S. flat at required spacing & frame

alround, square or round bars with round

bars with round headed bolts and nuts or by

(Plain grill) , Item No 10.1 , Item Code

Finishing Wall with Weather Proof Exterior

Emulsion Paint on wall Surface (Two Coats)

to give an required shape even shade after

throughly brushing the surface free from

mortar dropping and other foreign matter

and sand papered smooth , Item Code

, page no 146 , s.o.r 2024-25.

Steel work, welded in built up sections

framed work including cutting, hoisting,

fixing in position and applying a priming coat

of red lead paint. (A)In beams and joists,

channels angles Tees, flats, with connecting

24 plates or angle cleats as in main and cross 3.65 Quintal 8750.00 87.50 8837.50

beams. Hip and jack rafters, purlins conneted

to common rafters and the like , Item No

11.4 , Item Code 11002AA ,page no 115 , s.o.r

Applying priming coat over new steel and

other metel surface after and including

preparing the surface by throughly cleaning,

oil,grease, dirt and other foreign matter and

scoured with brushes fine steel

wood,scrapers and sand paper with ready

mixed priming paint brushing red lead , Item

No 19.20 , Item Code 19001 , page no 143

Painting two coats (excluding priming coat)

on new steel and other metal surface with

enamel paint, brushing, interior to give an

even shade including cleaning the surface an

even shade including cleanicn the surface of

all dirt, dust and other foreign matter , Item

No 19.7 , Item Code 19002 , page no

Providing and fixing window having extruded

aluminum Colour anodized section frame

main outer size 127mm x 38.10mm x 1.35mm

@wt. 1.384kg/m, horizontal Four track

member size 122.20mm x 31.75mm x

1.10mm@ wt 1.205 kg/m, vertical member of

size 122.20mm x 31.75mm x 1.50mm @1.398

kg/mt with sliding shutters of horizontal

member size 40mm x 18mm x 1.29mm@

0.456kg/mt ,vertical member of size 40mm x

18mm x 1.29mm @ 0.456 kg/mt with

5 mm thick transparent bronze colour tinted

float glass with powder coated aluminum

fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details

etc complete for window , Item No 0 , Item

Code 11026 , page no 117 , s.o.r 2024-25.

Point wiring for Light / Bell with 2-1.5

sq.mm & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to

mtr length , in below type of pipe erected

with 6A Modular type switch / bell push &

accessories and earth continuity of following

type, erected on PVC / Metallic/Wooden box,

single mounting base frame covered with

textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling

rose / H.D.Connector as directed (f) with

medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete

cat-III , (1-2-1) , s.o.r elec 2025-26.

Point wiring for FAN with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of

.ISI marked 1.1 KV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr

length, in below type of pipe erected with

6A Modular type switch and hum free EME

step type electronic fan regulator mounted

and accessories with earth continuity of

following type erected on PVC /

Metallic/Wooden box, single mounting base

29 frame covered with textured/metallic/white 4.00 Pts 668.00 6.68 674.68

front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed.(f)

with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete cat-III , (1-2-2) , Ele S.O.R 2025-26.

Point wiring for Looped Plug with 6A

Modular type switch & 5 pin socket erected

on PVC / Metallic box, single mounting base

frame covered with textured / metallic front

plate modules erected on / in wall / ceiling

with following type accessories cat III (1-2-4)

Ele s.o.r 2025-26.

Providing Following type ModularAccessories

MountedWith pvc/ metallic box single

mounting base frae coverd with textured /

metallic front plate modules erected with

31 necessary connection.As disired by Engineer 4.00 Each 179.00 1.79 180.79

In charge (9) 16 Amp. SP one way switch cat

(10) 16 Amp. Universal socket

Mains with 1.1 KV grade FRLS PVC insulated

ISI marked stranded Copper conductor wire

in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC

33 insulated stranded wire of green colour for 25.00 Mtr 62.00 0.62 62.62

earth continuity of following size (a) with

medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm (1-4-1) Chap 1 , Elec

(b) 2 wire 2.5 sq. mm(1-4-1) Chap 1 , Elec

Providing & Erecting following Shockproof

tissino type accessories erected on 3 mm

thick PC (Polycarbonate) sheet in PVC/ Metal

35 Box. erected on wall/ ceiling. (8) Bakelite 6.00 Each 22.00 0.22 22.22

lamp holder(1-6-1) chap 1 , Elec S.o.r 2025-

Supplying and erecting LED indoor fittings

with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing

used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser

with company mark/name 160V to 270V,

Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

36 Certificates)(NOTE: Below description have 5.00 Each 293.00 2.93 295.93

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges

shown.)(A) Tube Light with integral driver (iii)

18-20 Watts, Surge - 2KV,IP-20, conventional

4 feet cat-III , Chap 2 (2-15-1) , Elec S.o.r 2025-

Supplying and erecting led lamps with

following wattage capacity of 220 to

voltage, minimum 15000 burning hours life,

500 V in built-surge protection,Polycarbonate

diffuser, mounting suitable for E14 / E27 /

B22 lamp holders, pf >= 0.5 (A) LED Lamps

integral type, with PC diffuser suitable LAMP

(iii) 10 to 15 watts cat-III ,Chap 2 (2-15-2)

Elec S.o.r 2025-26.

Supplying and erecting approved make of

tube fitting with One no T-5 tube 24/

W with Electronic ballast with each tube

separately THD less than 10 & built in

adaptors, GI / PVC housing & mirror optic

38 reflector, suitable to work on 120V - 6.00 Each 476.00 4.76 480.76

300V, A.C. supply with connector and

adapter if required. [Make of fitting &

tube may be differ& fitting shall be

providing with tube] cat-III ,(2-7-1) , Elec

Providing & erecting Approved make Ceiling

Fan with double ball bearing ISI mark with

Condenser 230 volt A.C.50 Hz 1200 mm

sweep complete having 3 blades aluminium

body and blade sets having ornamental

39 design shanks , canopy erected with 4.00 Each 2289.00 22.89 2311.89

earthing. [ Make shall be approved by

Engineer in Charge] , chap 5 , (5-1-3) , Elec

Providing & erecting 415 V MCB Four Pole

for Motor & Inductive Load (C Curve) having

10KA breaking capacity & confirms to IS

40 :8828 in existing box having following 1.00 Each 730.00 7.30 737.30

capacity (c)63 Amp cat III ,(3-10-5) , Elec

Providing and erecting Sheet Steel powder

coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral

link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to

house appropriate nos. of MCBs.(The DBs

should be used of same company of MCB to

be used) suitable for(B) three phase incoming

and single phase horizontal type outgoing

Per phase isolation type (PPI) (a) single door

(iv)12 way , Chap 3(3-11-5) , Elec S.o.r 2025-