Providing LWSS Baira Badrota Suranga and Hatli Area in Tehsil Sarkaghat DisttMandi HP

Amount

Excavation in foundation trenches etc in earth work lift up to 1.50 mtrs stacking the excavated soil not more than 3 mtrs clear from the edge of excavation and then returning the stacked soil in 15 cm layers when required into plinths,sides of foundation etc, consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within a lead of 20 mtrs pick jumper work 50% each.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering strutting and propping etc. with wooden batten and ballies, in all heights of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for insitu-reinforced concrete and plain concrete work in :-

Vertical surfaces such as walls (any thickness) partitions & the like I/c attached pillasters,

Providing and laying cement concrete work 1:5:10( 1 cement :5 sand :10 graded stone agg. 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth.

P/F fancing panel of size 1.20 x 1.20 mtrs of jali 25 x 25mm mesh welded to ms black tube 32mm dia of gauge with M.S. flat cover 20 x 3 mm, M. S. hold fast 6 Nos made out of M.s. flat 32x5mm including cutting welding

White washing with lime on undecorated wall surface two coats to give an even shade including throughly brooming the surface to remove all dirt, dust, mortar dust and other foreign matter as per direction and to the entire satisfaction of Engineer-in-charge upto all lead and lifts.

Applying priming coat over new steel & other metal surface after and I /c preparing the surface by thoroughly cleaning oil grease, dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete with ready mixed priming paint brushing red lead, red oxide/ zinc oxide as per direction and to the entire satisfaciton of Engineer-in-charge upto all lead an lift.

Painting two coats excluding priming coat on new steel and other metal surface with enamal paint to give an even shade I/c cleaining the surface of all dirt dust and other foreign matter with enamel paint other than white

Steel work welded in built up sections, trusses and framed work including cutting,hosting,fixing in position and applying a priming coat of red lead paint in gratting framed guard bars, ladders, railing etc.

Vijay Kumar (BID ID -525422)