REPAIR, POLISHING AND RECANNING OF VARIOUS WOODEN FURNITURE AT MIL STN KANCHRAPARA UNDER GE BARRACKPORE

REPAIRS TO BED WITH PLY TOP FOR THE FOLLOWING (DRG No.FD-246):-

HEAD BOARD Removing decayed head board from its existing position and replace the same with new head board of overall size 900 x 610mm, frame made out from well seasoned 1st class hard wood (Teak/Seasam) batten 75mm x 22mm thick with soft wood (chair batten 03 Nos board), 4mm thick one side teak face BWR grade, type BB Ply wood (three Nos of ply) and other side commercial to be provided on both sides of the head board covering the soft wood batten, 12mm dia half cut teak wood beading shall be provided to join the ply wood and Hollock wood frame all as Shown on drawing. (Make of Ply wood : Century Ply/Greenply/National ply/Kit ply as approved)

FOOT BOARD Removing decayed foot board from its existing position and replace the same with new foot board of overall size 900mm long and 300mm height, frame made out from well seasoned 1st class hard wood (Teak/Seasam) batten 75mm x 22mm thick with soft wood (chair batten 03 Nos board), 4mm thick one side teak face BWR grade, type BB Ply wood (three Nos of ply) and other side commercial to be provided on both sides of the foot board covering the soft wood batten, 12mm dia half cut teak wood beading shall be provided to join the ply wood and Hollock wood frame all as Shown on drawing. (Make of Ply wood : Century Ply/Greenply/National ply/Kit ply as approved)

TABLE DRESSING GENTS MAP

CHAIR DINING JCO OR MAP

LONG RAIL Removing of each decayed long rail from its existing position and replace the same with new well seasoned 1st class hard wood (Teak/Seasam) long rail of size 95mmx35mmx1980mm long rounded one edges or face made out from well seasoned wood all as shown on drawing.

SHORT RAIL Removing of each decayed short rail from its existing position and replace the same with new well seasoned 1st class hard wood (Teak/Seasam) short rail of size 95mmx35mmx900mm short rounded one edges or face made out from well seasoned wood all as shown on drawing.

STIFFENER Removing of each decayed stiffner from its existing position and replace the same with new well seasoned 1st class hard wood (Teak/Seasam) stiffener of size 60mmX40mmX880mm long rounded one edges or face made out from well seasoned wood all as shown on drawing.

MS FLAT IRON STIFFENER Removing old MS stiffener from hard bed and replace the same with MS flat iron of size 35mm x5mmx150mm, bent at right angle at four corner all as shown on drawing.

TOP Removing decayed/wornout ply wood top from its existing position and replace the same with new plywood top made out from 12mm thick plywood (seven Nos of ply), BWR grade, type BB fixed to wooden rails with screws all as shown on drawing. (Make of Ply wood : Century Ply/Greenply/National ply/Kit ply/Archid ply as approved)

FRONT LEG Removing of each decayed front leg from its existing position and replace the same with new front leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

REAR LEG Removing of each decayed rear leg from its existing position and replace the same with new rear leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

FRONT RAIL Removing of each decayed front rail from its existing position and replace the same with new front rail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing .

REAR RAIL Removing of each decayed rear rail from its existing position and replace the same with new rear rail made out from well seasoned1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing.

SIDE RAIL Removing of each decayed side rail from its existing position and replace the same with new side rail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing.

REAR STIFFENER Removing of each decayed rear stiffener from its existing position and replace the same with new rear stiffener made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

STIFFENER Removing of each decayed stiffener from its existing position and replace the same with new stiffener made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

FRONT LEG Removing of each decayed front leg from its existing position and replace the same with new front leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

REAR LEG Removing of each decayed rear leg from its existing position and replace the same with new rear leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

FRONT RAIL Removing of each decayed front rail from its existing position and replace the same with new front rail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing.

REAR RAIL Removing of each decayed rear rail from its existing position and replace the same with new rear rail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing.

SIDE RAIL Removing of each decayed side rail from its existing position and replace the same with new side rail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing.

REAR STIFFNER Removing of each decayed rear stiffener from its existing position and replace the same with new rear stiffener made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

STIFFENER Removing of each decayed stiffener from its existing position and replace the same with new stiffener made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

ARM Removing of each decayed arm from its existing position and replace the same with new arm made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

REPAIRS TO CHAIR CB OFFICE FOR THE FOLLOWING (DRG NO.DB-3954 & DB-4124):-

FRONT LEG Removing of each decayed front leg from its existing position and replace the same with new front leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

REAR LEG Removing of each decayed rear leg from its existing position and replace the same with new rear leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

FRONT RAIL Removing of each decayed front rail from its existing position and replace the same with new front rail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing.

REAR RAIL Removing of each decayed rear rail from its existing position and replace the same with new rear rail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing.

SIDE RAIL Removing of each decayed side rail from its existing position and replace the same with new side rail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing .

STIFFENER Removing of each decayed stiffener from its existing position and replace the same with new stiffener made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

ARM Removing of each decayed arm from its existing position and replace the same with new arm made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

REPAIRS TO CHAIR EASY FOR THE FOLLOWING (DRG NO.FD-281, FD-229):-

FRONT LEG Removing of each decayed front leg from its existing position and replace the same with new front leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

REAR LEG Removing of each decayed rear leg from its existing position and replace the same with new rear leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

FRONT RAIL Removing of each decayed front rail from its existing position and replace the same with new front rail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing.

REAR RAIL Removing of each decayed rear rail from its existing position and replace the same with new rear rail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing.

SIDE RAIL Removing of each decayed side rail from its existing position and replace the same with new side rail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing .

ARM Removing of each decayed arm from its existing position and replace the same with new arm made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

REPAIRS TO CHAIR WOODEN BOTTOM W/O ARM FOR THE FOLLOWING [DRG NO. FD-56(M), FD-225, FD-285] :-

FRONT LEG Removing of each decayed front leg from its existing position and replace the same with new front leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

REAR LEG Removing of each decayed rear leg from its existing position and replace the same with new rear leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

FRONT RAIL Removing of each decayed front rail from its existing position and replace the same with new front rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing .

REAR RAIL Removing of each decayed rear rail from its existing position and replace the same with new front rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing .

SIDE RAIL Removing of each decayed side rail from its existing position and replace the same with new front rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing .

STIFFNER Removing of each decayed stiffener from its existing position and replace the same with new stiffener made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

SEAT Removing of decayed/wornout plywood seat from its existing position and replace the same with new seat made out from plywood of 6mm thick, BWR grade, type BB (five Nos of ply) trapezoidal in shape of length 445mm at front side and 405mm at rear side with 440mm in height all as shown on drawing.

RECANNING OF VARIOUS TYPE OF CHAIRS FOR THE FOLLOWING (DRG NO.FD-279, FD-280, FD-281, FD-229) :- Removing of old unserviceable cane plastic from various chairs such as chair dining, chair writing, chair CB office, chair office CB, chair CB w/o arm and chair easy etc re-canning the same with new cane plastic 2mm wide half round white in colour for main canning and 3.5 to 4mm wide half round white in colour for border as approved quality all as shown on drawing.

REPAIRS TO LOCKER FOR THE FOLLOWING (DRG NO FD-54(M) , FD-222 & FD-359) :-

TOP Removing decayed wooden top of locker from its existing position and replace the same with new top made out from 18mm thick well seasoned 1st class hard wood (Teak/Seasam) plank complete all as shown on drawing.

BOTTOM Removing decayed wooden from bottom side of locker from its existing position and replace the same with new bottom made out from 18mm thick well seasoned 1st class hard wood (Teak/Seasam) plank complete all as shown on drawing.

SIDE Removing decayed wooden each side of locker from its existing position and replace the same with new side made out from 18mm thick well seasoned 1st class hard wood (Teak/Seasam) plank complete all as shown on drawing.

SHUTTER Removing decayed shutter (Single leaf) from its existing position and replace the same with new leaf made out from 18mm thick veneered particle board (exterior grade) one side teak finish with 6mm thick and 1st class hard wood (Teak/Seasam) beading all round the shutter all as shown on drawing.

BACK Removing decayed back from its existing position and replace the same with new back made out from 6mm thick ply wood (five Nos of ply), type BB, BWR grade all as shown on drawing.

SHELF Removing each decayed shelf from its existing position and replace the same with new shelf made out from 12mm thick well seasoned 1st class hard wood (Teak/Seasam) planks all as shown on drawing.

HANGING ROD Removing old broken hanging rod from its existing position and replace the same with new hanging rod made out from 20mm (external dia) aluminium anodized conduit with a pair of sockets all as shown on drawing.

LEG Removing decayed wooden each leg of locker from its existing position and replace the same with new leg made out from well seasoned 1st class hard wood (Teak/Seasam) of size 50mmx50mm all as shown on drawing.

RAIL Removing decayed wooden each rail of locker from its existing position and replace the same with new leg made out from well seasoned 1st class hard wood (Teak/Seasam) of size 25mmx40mm all as shown on drawing.

HANDLE S&F for 100mm long CP handle all as shown on drawing.

HINGES S&F for 75mm long cold rolled mild steel butt hinges (medium weight) fixed with steel screws all as shown on drawing.

HASP & STAPLE Supply and fixing for 75mm long hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with steel wood screws.

REPAIRS TO TRESTLE STORE ROOM WOODEN FOR THE FOLLOWING [DRG NO FD-86(M),FD-141]:-

LEG Removing of decayed each leg of trestle store room from its existing position and replace the same with new leg made out from well seasoned ‘SAL’ wood all as shown on drawing.

TOP LONG RAIL Removing of decayed top long rail from its existing position and replace the same with new long rail made out from well seasoned ‘SAL’ wood all as shown on drawing.

CROSS STIFFENER Removing of decayed cross stiffener from its existing position and replace the same with new cross stiffener m

ade out from well seasoned ‘SAL’ wood all as shown on drawing.

REPAIRS TO TABLE WRITING FOR THE FOLLOWING (DRG NO. FD-33, FD-249, FD-275) :-

INTERMEDIATE STIFFENER Removing of decayed intermediate stiffener from its existing position and replace the same with new intermediate stiffner made out from well seasoned ‘SAL’ wood all as shown on drawing.

LEG Removing decayed each leg of table writing from its existing position and replace the same with new leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

TOP RAIL Removing decayed each top rail of table writing from its existing position and replace the same with new top rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

BOTTOM RAIL Removing decayed each bottom rail of table writing from its existing position and replace the same with new bottom rail made out from well 1st class hard wood (Teak/Seasam) all as shown on drawing.

STIFFENER Removing decayed each stiffener of table writing from its existing position and replace the same with new stiffener made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

SIDE BOX WITH DRAWER Removing decayed side almirah (side box ) with drawer and replace the same with 18mm thick veneered particle board (exterior grade) made having teak face at one side and other side commercial for side, back , front and bottom side of the drawer, stiffener, bearer shall be made out from well seasoned second class hardwood, rest all as shown on drawing.

TOP Removing decayed top from its existing position and replace the same with new top made out from 18/19mm thick Prelaminated Particle board (exterior Grade), prelaminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick and well seasoned 1st class hard wood (Teak/Seasam) beading allround the edging all as shown on drawing.

LEG Removing decayed each leg from its existing position and replace the same with new leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

TOP RAIL LONG Removing decayed each top long rail from its existing position and replace the same with new long rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

TOP RAIL SHORT Removing decayed each top short rail from its existing position and replace the same with new short rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

STIFFENER Removing decayed each stiffener from its existing position and replace the same with new stiffener made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

REPAIRS TO TABLE 3’X2’ WITH DRAWER FOR THE FOLLOWING [DRG NO. FD-283, FD-41(M) ]:-

TOP Removing decayed top from its existing position and replace the same with new top made out from 18/19mm thick Prelaminated Particle board (exterior Grade), prelaminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick and well seasoned 1st class hard wood (Teak/Seasam) beading allround the edging all as shown on drawing.

LEG Removing decayed each leg from its existing position and replace the same with new leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

TOP RAIL LONG Removing decayed each top long rail from its existing position and replace the same with new long rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

TOP RAIL SHORT Removing decayed each top short rail from its existing position and replace the same with new short rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

STIFFENER Removing decayed each stiffener from its existing position and replace the same with new stiffener made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

TOP Removing decayed top from its existing position and replace the same with new top made out from 18/19mm thick Prelaminated Particle board (exterior Grade), grade-I quality, prelaminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick and well seasoned 1st class hard wood (Teak/Seasam) beading allround the edging provide middle stiffener at the bottom 100mm high between the lower short side rails and provide PVC shoes 25mm dia and 25mm high shall be screwed to bottom of all legs all as shown on drawing.

TOP Removing decayed top from its existing position and replace the same with new top made out from 18/19mm thick Prelaminated Particle board (exterior Grade), prelaminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick and well seasoned 1st class hard wood (Teak/Seasam) beading allround the edging all as shown on drawing.

LEG Removing decayed each leg from its existing position and replace the same with new leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

TOP RAIL LONG Removing decayed each top long rail from its existing position and replace the same with new long rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

DRAWER Removing decayed and replace the drawer made out from well seasoned 1st class hard wood (Teak/Seasam) for front, rear & side with track rail, guide rail & fillet and bottom shall be made out from 6mm thick plywood (five Nos of ply), type BB, BWR grade complete all as shown on drawing.

STIFFENER Removing decayed each stiffener from its existing position and replace the same with new stiffener made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

TOP Removing decayed top from its existing position and replace the same with new top made out from 18/19mm thick Prelaminated Particle board (exterior Grade), prelaminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick and well seasoned 1st class hard wood (Teak/Seasam) beading allround the edging all as shown on drawing.

LEG Removing decayed each leg from its existing position and replace the same with new leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

TOP RAIL LONG Removing decayed each top long rail from its existing position and replace the same with new long rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

STIFFENER Removing decayed each stiffener from its existing position and replace the same with new stiffener made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

STIFFENER Removing decayed each stiffener from its existing position and replace the same with new stiffener made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

REPAIRS TO TABLE CENTRE FOR THE FOLLOWING (DRG NO.FD-29 , FD-235, FD-274):-

TOP Removing decayed top from its existing position and replace the same with new top made out from 18/19mm thick Prelaminated Particle board (exterior Grade), prelaminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick and well seasoned 1st class hard wood (Teak/Seasam) beading allround the edging all as shown on drawing.

LEG Removing decayed each leg from its existing position and replace the same with new leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

TOP RAIL LONG Removing decayed each top long rail from its existing position and replace the same with new long rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

STIFFENER Removing decayed each stiffener from its existing position and replace the same with new stiffener made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

STIFFENER Removing decayed each stiffener from its existing position and replace the same with new stiffener made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

TOP AND BOTTOM OF BOX Removing decayed top and bottom of box from its existing position and replace the same with new top made out from 12mm thick pre-laminated particle board (exterior grade), grade-I quality, with 6mm thick and well seasoned 1st class hardwood (Teak/Seasam) wooden beading allround the edging. Bottom of the box shall be made out 12mm thick ply wood (seven Nos of ply), type BB, BWR Gde complete all as shown on drawing.

SIDE OF BOX Removing decayed each side of the box from its existing position and replace the same with new side of the box made out from 12mm thick pre-laminated particle board (exterior grade), grade-I quality, one side decorative all as shown on drawing.

BACK OF BOX Removing decayed each back of the box from its existing position and replace the same with new back of the box made out from 12mm thick plywood (seven Nos of ply), type BB, type BWR grade, complete all as shown on drawing.

DRAWER Removing decayed drawer and supply and fixing drawer front & side made out from 12mm thick pre-laminated particle board (exterior grade), grade-I quality, one side decorative, bottom shall be made out from 6mm thick ply wood (five Nos of ply), type BB, BWR grade and back shall be made out from 12mm thick well seasoned second class hardwood all as shown on drawing.

STIFFENER Removing decayed each stiffener from its existing position and replace the same with new stiffener made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

MIRROR Removing broken mirror from its existing position and supply and fixing for copper plated 5.5mm thick mirror mounted on new frame made out 6mm thick ply wood (five Nos of ply), type BB, BWR grade and with well seasoned second class hard wood all as shown on drawing. (Make : Modiguard/Saint gobain as approved)

SIDE Removing decayed side from its existing position and replace the same with new side made out from 18mm thick veneered particle board (exterior grade) with one face teak and other face commercial veneer all as shown on drawing.

BACK Removing decayed back from its existing position and replace the same with new back made out from 12 mm thick veneered particle board (exterior grade) with commercial veneers on both faces all as shown on drawing.

DRAWER Removing drawer and replace the side and back of drawer made out from 12mm thick well seasoned 1st class hard wood (Teak/Seasam). Bottom of the drawer shall be made out from 6mm thick ply wood (five Nos of ply), type BB, BWR grade. Front of the drawer shall be made out from 18mm thick veneered particle board (exterior grade) with commercial veneers on both faces with 1.00mm thick plastic laminated sheet (plain & wood grain) pasted over particle board with approved synthetic adhesive all as shown on drawing.

MIRROR Removing broken mirror with frame and supply and fixing for mirror 5.50 mm thick 355mmx1220mm size free from any cracks/scratches and distorted image etc mounted on 6mm thick ply wood (five Nos of ply), type BB, BWR grade and with 25mmx19mm teak wood well seasoned timber frame all as shown on drawing. (Make : Modiguard/Saint gobain as approved)

LEG Removing decayed each leg of table 900mmx900mm from its existing position and replace the same with new leg made out well seasoned 1st class hard wood (Teak/Seasam) all as shown in drawing.

TOP RAIL LONG Removing each decayed top long rail from its existing position and replace the same with new rail long made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown in drawing.

TOP RAIL SHORT Removing each decayed top short rail from its existing position and replace the same with new rail short made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown in drawing.

TOP Removing decayed top from its existing position and replace the same with new 18/19mm thick Prelaminated Particle board (exterior Grade), grade-I quality, prelaminated one side with decorative choice lamination & other side balancing white lamination includi

TOP RAIL SHORT Removing each decayed top short rail from its existing position and replace the same with new rail short made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown in drawing.

ng provision of 4mm thick teak wood beading alround the edging all as shown on drawing.

MS STIFFENER Provision of mild steel flat iron of size 20mmx3mmx200mm long bent to shape as in strap to all joints, jointing length & top of each table fixed with suitable size wood screws all as directed.

LEG Removing decayed wooden each leg of table bed side from its existing position and replace the same with new leg made out from well seasoned 1st class hard wood (Teak/Seasam) of size 65mmx50mm all as shown on drawing.

MIRROR Removing broken mirror with frame and supply and fixing for mirror 5.50 mm thick 355mmx1220mm size free from any cracks/scratches and distorted image etc mounted on 6mm thick ply wood (five Nos of ply), type BB, BWR grade and with 25mmx19mm teak wood well seasoned timber frame all as shown on drawing. (Make : Modiguard/Saint gobain as approved)

SIDE Removing decayed each side of table bed side from its existing positon and replace the same with 18mm thick one side teak face particle board (Exterior Grade), grade-I quality of required size all as shown on drg.

BACK Removing decayed each back of table bed side from its existing position and replace the same with new back made out from 6mm thick plywood (five Nos of ply), type BB, BWR grade of required size all as shown on drawing.

STIFFENER Removing decayed each stiffener from its existing position and replace the same with new stiffener made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

Removal of old unserviceable foam, cushion sofa set(comprising of 10 Nos single cushion including seat and back) and supply and fixing new foam cushion 100mm thick 40/32 density covered with approved quality tapestry cloth (cost of tapestry cloth shall; not be less than Rs.450.00 per metre). (Make : Kurlon/Sleepwell as approved)

Removal of old unserviceable tapestry cloth from each foam cushion sofa set (comprising of 10 Nos single cushion) and replace with new tapestry cloth of approveds quality (cost of tapestry cloth shall not be less than Rs. 450.00 per metre).

TAKING DOWN OLD UNSERVICEABLE COMPONENTS/PARTS FROM SOFA SET (5 SEATER/ 4 SEATER/ 3 SEATER & SINGLE SEATER) AND REASSEMBLE/ REFIXING WITH THE FOLLOWING NEW PARTS MADE OUT OF WELL SEASONED TEAK WOOD FREE FROM CRACK, KNOTS, HOLE ETC ALL AS SPECIFIED AND SHOWN ON DRG NO FD-281:-

S&F for teak wood arms of sofa sets of required size including taking out unserviceable/ damage arms complete all as specified and as shown on drawing.

S&F for teak wood legs of sofa sets of required size including taking out unserviceable/ damage legs complete all as specified and as shown on drawing.

S&F for teak wood bottom of seat & back of sofa sets of required size including taking out unserviceable/ damage bottom of seat & back complete all as specified and as shown on drawing.

Removing decayed top from its existing position and replace the same with new veneered particle board 18mm thick (exterior grade), grade-I quality, with 1.00mm thick plastic laminated sheet plain & wood grain pasted over particle board with approved synthetic adhesive all as shown on drawing.

Removing decayed wooden each leg of side board from its existing position and replace the same with new leg made out from well seasoned 2nd class hardwood of size 125mmX125mmX45mm complete all as shown in drawing.

Removing decayed back form its existing position and replace the same with new 6mm thick plywood (five Nos of ply), type BB, BWR grade complete all as shown on drawing.

Removing decayed shutter (single leaf) from its existing position and replace the same with 18mm thick veneered particle board (exterior grade), grade-I quality with one face teak veneer and other side commercial and 6mm thick well seasoned 1st class hard wood (Teak/Seasam) beading alround the shutter all as shown on drawing.

TOP SHORT RAIL Removing decayed each top short rail from its existing position and replace the same with new short rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

Removing decayed drawer and replace the drawer made out from 18mm thick veneered particle board (exterior grade) grade-I quality, with one face teak veneer on front side and 6mm thick plywood (five Nos of ply), type BB, BWR grade on botton knob for the drawer shall be provided as approved by Engineer-in-Charge and rest all as shown on drawing.

TOP LONG RAIL Removing decayed each top long rail from its existing position and replace the same with new long rail made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

Removing decayed each side of side board from its existing position and replace the same with 18mm thick veneered particle board(exterior grade), grade-I quality with one face teak veneer all as shown on drawing.

TOP Removing decayed top from its existing position and replace the same with new veneered particle board 18mm thick (exterior grade), grade-I quality, with 1.00mm thick plastic laminated sheet plain & wood grain pasted over particle board with approved synthetic adhesive all as shown on drawing.

BACK Removing decayed back from its existing position and replace the same with new 6mm thick ply wood (five Nos of ply), type BB, BWR grade complete all as shown on drawing.

SIDE Removing decayed each side of book case from its existing position and replace the same with 18mm thick veneered particle board exterior grade with one face teak veneer all as shown on drawing.

SHELF Removing each decayed shelf from its existing position and replace the same with new shelf made out from 12mm thick well seasoned 2nd class wooden planks all as shown on drawing.

SHUTTER Removing decayed shutter (Single leaf) from its existing position and replace the same with 18mm thick veneered particle board exterior grade with one face teak veneer and other side commercial and 6mm thick well seasoned 2nd class hard wood beading alround the shutter all as shown on drawing.

BACK Removing decayed back from its existing position and replace the same with new back made out from 12 mm thick veneered particle board (exterior grade), grade-I quality with commercial veneers on both faces all as shown on drawing. (Make of ply wood : Century Ply/Green Ply/National Ply/ Kit Ply as approved)

MIRROR Removing broken mirror from its existing position and supply and fixing for copper plated 5.5mm thick mirror mounted on new frame made out 12mm thick ply wood (Seven Nos of ply), type BB, BWR grade and covered by decorative mould and supported on 50mm x 28mm frame all round complete all as directed all as shown on drawing. (Make : Modiguard/Saint gobain/Atul as approved)

SHELVES S&F for 5mm thick glass shelves in cabinet supported on glass holders including taking down brocken shelves complete all as specified and shown on drawing. (Make : Modiguard/Saint gobain/Atul as approved)

MAGNET CATCH S&f for magnet catch inside the cabinet to catch mirror frame including taking down unserviceable magnet catch all as specified on drawing.

FRONT LEG Removing of each decayed front leg from its existing position and replace the same with new front leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

REAR LEG Removing of each decayed rear leg from its existing position and replace the same with new rear leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

FRONT RAIL Removing of each decayed front rail from its existing position and replace the same with new front rail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing.

REAR RAIL Removing of each decayed rear rail from its existing position and replace the same with new rear rail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing.

LEGS Removing decayed each leg of dressing table of 38mm x 38mm from its existing position and replace the same with new leg made out well seasoned 1st class hard wood (Teak/Seasom) complete all as specified and directed.

SIDE Removing decayed side from its existing position and replace the same with new side made out from 18mm thick veneered particle board (exterior grade), grade-I quality with one face teak and other face commercial veneer all as shown on drawing. (Make of Ply wood : Century Ply/Green Ply/National Ply/Kit Ply as approved)

STIFFENER Removing of each decayed stiffener from its existing position and replace the same with new stiffener made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

SIDE RAIL Removing of each decayed side rail from its existing position and replace the same with new side rail made out from well seasoned 1st class hard wood (Teak/Seasam) with 3mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing.

REAR STIFFNER Removing of each decayed rear stiffener from its existing position and replace the same with new rear stiffener made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

S&F for teak wood front/rear rails of sofa sets of required size including taking out unserviceable/ damage front/rare rails complete all as specified and as shown on drawing.

S&F for teak wood side rails of sofa sets of required size including taking out unserviceable/ damage side rails complete all as specified and as shown on drawing.

FOOT BOARD INNER S&F for new 4mm thick one side teak face BWR grade, type BB plywood (three Nos of ply) and other side commercial for foot board inner including finishing the surface with french polish including taking out old unserviceable foot board inner complete all as specified and as Shown on drawing. (Make of Ply wood : Century Ply/Greenply/National ply/Kit ply as approved)

BED WITH PLY TOP

CHAIR DINING

CHAIR CB OFFICE

CHAIR EASY

CHAIR WOODEN BOTTOM WITHOUT ARM

LOCKER WOODEN

TRESTILE STORE ROOM WOODEN

TABLE WRITING

TABLE 3'X2' WITHOUT DRAWER

TABLE 3'X2' WITH DRAWER

TABLE DINING FOR 6 PERSONS

TEAPOY

TABLE CENTER

TABLE DRESSING GENTS

TABLE DRESSING LADIES

TABLE 900MM X 900MM

TABLE BED SIDE

TABLE PEG

SOFA SET FIVE SEATER

SIDE BOARD

BOOK CASE