REPAIR / MAINT AND PAINTING OF CERTAIN STEEL FURNITURE AT GE (MES) PITHORAGARH

Amount

DESCRIPTION OF ITEMS

Almirah steel Med (FD 67/1032) S & F following components of Almirah steel med including dismantling unservicable one all as specified and as directed (a) Lock 7 lever with duplicate keys

(b) Handle 125mm size chromium plated

(c) 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer.

(d) Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer.

(e) Supply and fix door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 125mm size -01 No, 3 way locking device with 7 lever brass lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and shown on drawing. (Note for steel painting;- All steel surface shall be done with spray painting)

(f) Supply and fix shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer.

(g) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of (spray painting)synthetic enamel paint of olive green shade of approved quality both inside and outside including dents/bends complete all as specified and as directed.

Almirah steel large (FD-67/1031) S & F following components of Almirah steel med including dismantling unservicable one all as specified and as directed (a) Lock 7 lever with duplicate keys (Make of Lock- Rina)

(b) Handle 125mm size chromium plated

(c) 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer.

(d) Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer.

(e) Supply and fix door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 125mm size -01 No, 3 way locking device with 7 lever brass lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and shown on drawing (Make of Lock- Rina)

(f) Supply and fix shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer.

(g) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of olive green shade of approved quality both inside and outside complete including dents/bends complete all as specified and as directed.

Locker steel (FD-1029) S & F following components of Locker steel including dismantling unservicable one all as specified and as directed. (a) Handle 100 mm size chromium plated

(b) Hasp & stapple chromium plated

(c) Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer.

(d) S & F door shutters made of 1mm thick CRCA sheet including chromium plated handle 100mm size -01 No, chromium plated hasp & stapple of approved quality and painting with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and as directed.

(e) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of olive green shade of approved quality both inside and outside complete including dents/bends complete all as specified and as directed.

Table dinning ORs steel (FD-165 (R) S & F following components of Table dinning ORs steel including dismantling unservicable one all as specified and as directed. (a) Leg/stiffener 25 x 25 x 1.6mm thick MS square pipe duly welded to the frame including minor repairs to the table and painting the replaced portion.

(b) Table top made of 18mm thick pre-laminated board exterior quality of approved shade including provision of 4mm thick teakwood beading all around.

(c) Preparation of the old painted steel surfaces by scraping with emery paper, cleaning and applying one coat of synthetic enamel paint of olive green shade of approved quality.

(d) PVC shoe

Table office officer/clerk steel (FD-84/1003,1004 ) S & F following components of Table office officer/clerk steel including dismantling unservicable one all as specified and as directed. (a) Drawer made of 1mm CRCA sheet including painting with synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside including preparation of surfaces and repairing inter locking system and providing new lock 6 lever to top drawer.

(b) Leg/stiffener 25 x 25 x 1.6mm thick MS square pipe duly welded to the frame and painted with one coat of synthetic enamel paint over a coat of primer.

(c) Lock of 6 levers with duplicate keys

(d) Side panel made of 1mm CRCA sheet including painting with synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside including preparation of surfaces.

(e)Top made of 18mm thick pre-laminated particle board one side teak face including provision of 4mm thick teakwood beading all around complete of following type;- (i)Table office officer

(f)Top made of 18mm thick pre-laminated particle board one side teak face including provision of 4mm thick teakwood beading all around complete of following type (ii)Table office clerk

(g) PVC shoe

(h) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of olive green shade of approved quality both inside and outside complete all as specified and as directed (i) Table Office Officer Steel

(j) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of olive green shade of approved quality both inside and outside complete all as specified and as directed (ii) Table Office Clerk Steel

Rack steel 6 Tier FD-129(M)/1038 S & F following components of Rack steel 6 tier including dismantling unservicable one all as specified and as directed. (a) MS angle iron of size 30 x 30 x 3mm thick, 1905mm long including painting with one coat of synthetic enamel paint olive green shade of approved quality over a coat of primer.

(b) Shelves of size 760 x 915mm made of 1mm CRCA sheet including painting with one coat of synthetic enamel paint olive green shade of approved quality over a coat of primer.

(c) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth and applying one coat of synthetic enamel paint of olive green shade of approved quality.

Charpoy GI pipe (FD-220) S & F following components of Charpoy GI pipe including dismantling unservicable one all as specified and as directed. (a) Long rail made of 32 mm dia GI Tubing medium grade ISI mark 1.88 mtr long, threaded at both ends and fixing to 3 way 32 mm dia GI elbow of charpoy. (Make : Jindal/Surya/Tata)

(b) 3 way 32 mm dia GI elbow ISI mark

(c) Check nuts of 32 mm dia

(d) Conversion of 32 mm dia long rail obtained from item No 7.00 (a) above into two numbers short rail after cutting and threading both ends and fixing to 3 way 32 mm dia existing elbow.

(e) Conversion of 32 mm dia short rail obtained from item No 7.03 (d) above into two numbers leg including fixing to 3 way 32 mm dia elbow at one end threaded .

(f) MS flat of size 40x4mm with two Nos. nut & bolts.

(g) S & F 12 mm BWR phenol bonded commercial plywood of size 2000 mm x 900 mm including providing 50mm wide strip made out of 6mm thick plywood for filling gap between plywood sheet and short rails including replacement of bolts and nuts for fixing of plywood. Make of plywood - kit ply/Green ply/ National.

Chair steel tubular with/ without arms (FD-75 M) S & F following components of Chair steel tubular with/ without arms made out of shisham wood french polished duly plastic canned in 'Godrej' pattern with plastic cane 2mm width and borders with 4mm wide plastic cane fixed with screws 4 Nos and nuts to the chair frame complete all as per drawing. including dismantling unservicable one all as specified and as directed. (a) Seat frame

(b) Back frame

(c) Handle made of shisham wood duly french polished and fixed to the chair tubular with arms with screws of suitable size.

(d) MS Flat size 53 x 25 x 4mm thick welded at four corner at bottom of the seat only to support and screwed with the seat at two places.

(e) PVC shoe

(f) Preparation of surfaces and painting with synthetic enamel paint OG colour to chair steel tubular with/without arms 2 Nos of PVC caps on the top of the frame.

Chair Varandah (FD-256) S & F following components of Chair verandah including dismantling unservicable one all as specified and as directed. (a) MS conduit 20mm bore,1.6mm thick, upto 30cm length, made to shape, duly welded wherever required.

(b) PVC shoe

(c) Recaning the chair fully both seat and back with new plastic cane, white, half round of size 4mm wide including providing new suitable PVC shoes of approved quality and colour.

(d) Preparation of steel tubular frame surfaces with emery paper and applying two coat of synthetic enamel paint of white colour of approved quality.

Teapoy Varandah (FD-255/FD-35(M) S & F following components of Tepoy Varandah including dismantling unservicable one all as specified and as directed. (a) Top made out of 18mm block board with 1mm sunmica white in colour pasted on it including 4mm teak wood beading all around the top.

(b) PVC shoe

(c) Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of white synthetic enamel paint

Table Steel 1520x860x760 (FD-1010) S & F following components of Table Steel 1520x860x760mm including dismantling unservicable one all as specified and as directed. (a) Top pre-laminated particle board 18/19 mm thick one side teak shade and other side white shade and 4mm thick shisham wood beading all round the top.

(b) Leg of size 740 mm long made out of 1.6 mm thick 32 mm square MS tube duly welded wherever required including one coat of OG Synthetic enamel paint over a coat of Red Oxide primer complete all as specified Drg.

(b) PVC shoe

(c) Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of OG synthetic enamel paint

Table Steel 900x900x760 (FD-1009) S & F following components of Table Steel 900x900x760 including dismantling unservicable one all as specified and as directed. (a) Top pre-laminated particle board 18/19 mm thick one side teak shade and other side white shade and 4mm thick shisham wood beading all round the top.

(b) Leg of size 740 mm long made out of 1.6 mm thick 25 mm square MS tube including one coat of OG Synthatic enamel paint over a coat of Red Oxide primer complete all as specified Drg.

(c) PVC shoe

(d) Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of OG synthetic enamel paint

Table Steel 900x600x760 With Drawer (FD-167(M)/1008) S & F following components of Table Steel 900x600x760mm including dismantling unservicable one all as specified and as directed. (a) Top pre-laminated particle board 18/19 mm thick one side teak shade and other side white shade and 4mm thick shisham wood beading all round the top.

(b) Leg of size 740 mm long made out of 1.6 mm thick 25 mm square MS tube including one coat of OG Synthatic enamel paint over a coat of Red Oxide primer complete all as specified Drg.

c) Drawer Locks 6 liver with keys in duplicate and making the drawer functional complete all as specified and as directed and as shown on drg.(Make : RINA)

(d) PVC shoe

(e) Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of OG synthetic enamel paint

Table Steel 900x600x760 Without Drawer (FD-167(M)/1007) S & F following components of Table Steel 900x600x760 without drawer including dismantling unservicable one all as specified and as directed. (a) Top pre-laminated particle board 18/19 mm thick one side teak shade and other side white shade and 4mm thick shisham wood beading all round the top.

(b) Leg of size 740 mm long made out of 1.6 mm thick 25 mm square MS tube including one coat of OG Synthetic enamel paint over a coat of Red Oxide primer complete all as specified Drg.

(c) PVC shoe

(d) Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of OG synthetic enamel paint

Foam With/Without Back (FD-77 (M)) S & F following components of Foam without Back without drawer including dismantling unservicable one all as specified and as directed. (a) Top Plank of Shisham Wood to be provided of the size 1525x255x25mm applying raw/burnt seina uniformly and polishing with french polish one or more coat to obtain a glossy finish complete

(b) Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of OG synthetic enamel paint including minor repair works.

Table Bed Side Steel (FD-157(M)) S & F following components of Table Bed Side Steel 600x380x760mm including dismantling unservicable one all as specified and as directed. (a) Top pre-laminated particle board 18/19 mm thick one side teak shade and other side white shade or both side Teak shade and 4mm thick shisham wood beading all round the top.

(b) PVC shoe

(c) Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coat of OG synthetic enamel paint .

Stool Steel/ Rack Stationery (FD-81(M)) (a) Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth also rectify the existing dents/bends and applying two coat of OG synthetic enamel paint .

Rack Side Steel (a) Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth also rectify the existing dents/bends and applying two coat of OG synthetic enamel paint .

Almirah steel Med Glass Panel S & F following components of Almirah steel med including dismantling unservicable one all as specified and as directed (a) Lock 7 lever with duplicate keys

(b) Handle 100 mm size chromium plated

(c) 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer.

(d) Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer.

(e) Supply and fix door glass of existing size and shape including dismantling old and unserviceable one.

(f) Supply and fix shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer.

(g) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of (spray painting)synthetic enamel paint of olive green shade of approved quality both inside and outside including dents/bends complete all as specified and as directed.

Book Case Steel (FD-1028) S & F following components of Almirah steel med including dismantling unservicable one all as specified and as directed (a) Lock 6 lever with duplicate keys

(b) Handle 100mm chromium plated or as per existing shape and size or as shown in drg

(c) Supply and fix door glass of existing size and shape including dismantling old and unserviceable one.

(d) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required also rectify the existing dents/bends and make the shape proper and applying one coat of (spray painting)synthetic enamel paint of olive green shade of approved quality both inside and outside including dents/bends complete all as specified and as directed.

JAISWAL ENTERPRISES

F.M. KHAN SONS