PERIODICAL SERVICES TO MARRIED AND OTM ACCN TO VARIOUS BLDGS AT ZONE C AT BARRACKPORE UNDER GE BARRACKPORE

Amount

M&L for complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as directed.

M&L for one coat of acrylic water based exterior grade primer @0.9 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

M&L for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed.

Taking down cement plaster of any description on brick or stone or concrete surface of wall etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:6) on brick work or concrete surfaces of wall, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick on fair face of brick works or concrete surfaces of walls with cement mortar (1:4) in two coats (10mm thick backing coat + 5mm thick plaster) mixed with WPC @200ml per 50 Kg of cement on 5mm thick plaster, finished the surfaces even and smooth without using extra cement complete all as specified and directed. (Note : WPC will be measured and paid separately under relevant item.)

M&L for rendering 5mm thick in cement mortar (1:3) on ceiling, chajja etc surface finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound liquid, ISI marked complete all as specified and directed.

M&L for applying two coats of oil emulsion distemper over a coat of alkali resistant primer on wall surfaces after preparation of newly plastered surfaces complete all as specified and directed.

M&L for applying two coats of oil emulsion distemper over a coat of alkali resistant primer over and including applying 3mm thick wall care putty on newly plastered surface of wall including preparation of surfaces complete all as specified and directed.

M&L for applying three coats of white wash on ceiling surface including preparation of new plastered surface complete all as specified and directed.

M&L for applying one coat of oil emulsion distemper over old decorated plaster surfaces of wall after preparation of surfaces by wahing, rubbing down etc complete all as specified and directed.

M&L for applying two coats of oil emulsion distemper over a coat of alkali resistant primer over and including applying 3mm thick wall care putty on old decorated plastered surface of wall after and including complete removal of existing treatment and preparation of surfaces complete all as specified and directed.

M&L for applying one coat of oil emulsion distemper over old decorated plaster surfaces of ceiling including stoping nails, holes, filling the cracks after preparation of surfaces complete all as specified and directed.

M&L for applying one coat of white wash on old surfaces of ceiling including preparation of surface complete all as specified and directed.

M&L for applying one coat of cement base paint after preparation of old decorated plaster surfaces of walls including stoping nails, holes, filling the cracks with putty complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint (1st grade quality) after preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm in width or girth complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint (1st grade quality) after preparation of old painted steel surfaces of any description, over 10cm in width or girth, not otherwise described complete all as specified and directed.

M&L for writing letters or figures (block, roman, italic or Indian) not exceeding 30cm high after cleaning and preparation of existing surfaces complete all as specified and directed.

Removing plant including roots by dismantling of brick work/PCC/RCC including necessary scaffolding any type in any location/position i.e. roof, parapet wall near pipes etc and applying concentrated hydrochloric or sulphuric acid after removing roots for preventing the regrowth and making good of disturbed portion using PCC (1:2:4) type B0 & 10mm thick plaster in cement mortar (1:3) size of disturbed portion 150mm X150mmX200mm complete all as specified and directed.

Dismantling of 100/110mm bore cast iron/ reinforced concrete drain pipes/ PVC (SWR) pipes, jointed in any type and taking out from wall/ceiling/floor/trenches and any position complete all as specified and as directed.

S&F of 110mm bore PVC (SWR) pipe single socketed in any length fixed with rubber ring joints to wall with suitable PVC clamp complete all as specified and directed.

Ditto all as above item No. 22.00 but except pipe complete all as specified and as directed. (Note :- Serviceable pipe shall be obtained from Item No. 21.00 here-in-before)

Dismantling of 75mm bore cast iron/ reinforced concrete drain pipes/ PVC (SWR) pipes, jointed in any type and taking out from wall/ceiling/floor/trenches and any position complete all as specified and as directed.

S&F of 75mm bore PVC (SWR) pipe single socketed in any length fixed with rubber ring joints to wall complete all as specified and directed.

Ditto all as above item No. 25.00 but except pipe complete all as specified and as directed. (Note :- Serviceable pipe shall be obtained from Item No. 24.00 here-in-before)

S&F of 110 mm bore PVC (SWR) bends any radius provided with access door complete all as specified and directed.

Ditto all as above item No. 27.00 but except pipe complete all as specified and as directed. (Note :- Serviceable bend shall be obtained from Item No. 21.00 here-in-before)

S&F for 110 mm bore PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and directed.

S&F of 110mm bore PVC(SWR) junction single, (single T) equal or unequal providing access door complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) bends any radius provided with access door complete all as specified and directed.

S&F of 75mm bore PVC(SWR) junction single, (single T) equal or unequal providing access door complete all as specified and directed.

S&F of 100 mm bore pipe Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

S&F of 75 mm bore pipe Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for RCC (nominal mix) (1:2:4) type B0 (using 12.5mm graded crushed stone aggregates) as in chajjas complete all as specified and directed.

M&L for providing formwork to chullah hoods, chajjas, troughs and similar items including edges for flat, rough finish surface of concrete complete all as specified and directed.

M&L for TMT bars 10 mm dia and over cut to length bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for TMT bars 6mm to 8mm dia and over cut to length bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Shree Mahabir Builders

M/S H.P Singha

M/S. M. S. CONSTRUCTION

K. K. CONSTRUCTION

BHARUKA ENTERPRISES

KAY BEE ASSOCIATES

ELECTRO COMMERCIAL CO

Shanti Construction Company