Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.2 LAccepted-AOC R O VILL P O NAIN TEHSIL BARSAR DISTT HAMIRPUR H P | HAMIRPUR | HIMACHAL PRADESH | 174304 | L1 | Accepted-AOC Award | |
| 2 | L2₹47.1 L+₹1.9 L (4.10%)Rejected-Finance R O VILL P O NAGROTA BAGWAN TEHSIL NAGROTA BAGWAN DISTT KANGRA | KANGRA | HIMACHAL PRADESH | 176001 | L2 | Rejected-Finance Lowest 2 |
Tender Value
₹45.3 L
EMD Value
₹90,550
Closing Date
18 Apr 2026, 10:00 amClosed
Executive Engineer
EE HP PWD Division Tanda at Nagrota Bagwan
A/R and M/O to 500 Bedded Hospital at Dr R.P. Govt. Medical College Tanda in Tehsil Nagrota Bagwan Distt Kangra (HP) (SH-Repair of various works for the financial year 2026-27)
2026_PWD_133431_1
Nagrota 08.04.2026
Open Tender
Civil Works - Buildings
Percentage
365 days
Nagrota Bagwan
Please refer Tender documents.
13 documents required · 13 mandatory
₹2,000
₹90,550
14 May 2026
8 Apr 2026
18 Apr 2026
8 Apr 2026
18 Apr 2026
8 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Repairs to plaster of thickness 12 mm (Twelev millimetres) to 20 mm (Twenty millimetres) in patches of area 2.5 sq. (Two point five square) meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete With cement mortar 1:4 (One cement : Four fine sand) complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||||
| 2Providing and fixing anodised / colour coated aluminium work for door (External door NO 14081 Size 127x 44.45x3.19mm (One hundred twenty seven into forty four into three point ninteen millimetres) , window, ventilators and partitions frame with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In- Charge. For doors windows, ventilatiors and glazed partitions frames.For shutters of doors windows &ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittingswhere ever required including the cost of PVC/neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately) complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||||
| 3Providing and fixing anodised / colour coated aluminium work for door , window, ventilators and partitions shutter with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge. For doors windows, ventilatiors and glazed partitions frames.For shutters of doors windows &ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of PVC/neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately) complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||||
| 4Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.5 mm (Five point five millimetre) thickness (weight not less than 12.50 kg/sqm (Twelev point fifty kilograms/squre metres) complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||||
| 5Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg (One hundred twenty five kilograms)for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. with stainless steel cover plate minimum 1.25 mm thickness complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||||
| 6Providing and fixing 4mm (Four hundred millimtres) thick E Board (Embassed board) Ceiling of approved quality of ISI Mark including fixing to base frames with screws and clamps etc complete (frame work for base & cover fillets to be measured and paid for separately) complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||||
| 7Providing and fixing 19mm (Nineteen millimetres) thick Commercial Board water proof shutters for up boards including fixing with nickel plated piano hinges with screws etc.) complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||||
| 8Providing and fixing 6mm (Six millimetre) thick plain asbestos cement sheet ceiling of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||||
| 9Providing 10 mm (Ten millimetres) thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m (Five metre) above floor level, over first class kail wood strips 25x6 mm (Twenty five into six millimetres) with 10 mm (Ten millimetres) gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately): Flat surfaces complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||||
| 10Providing and fixing Stainless steel Road for pelmet grade 304, curtain rod 25 mm (Twenty five millimetres) dia 1.20mm (One point twenty millimetres) thick complete as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | |||||
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.20 MB
Sbd.pdf
Tender Documents • 13.65 MB
BOQ_197287.xls
BOQ • 0.49 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .