Wanakbori Thermal Power Station

No. CODE Reqd.

MICROPROCESSOR BASED FIRE

1 2 Numbers

ALARM CONTROL PANEL

ACTIVE REPEATER PANEL FOR

2 FIRE ALARM MAKE :NOTIFIER BY 2 Number

3 Photo electric smoke detector 180 Number

ADDRESSABLE RATE OF RISE

4 30 Number

HEAT DETECTOR

ANALOUGE ADDRESSABLE

5 5 Number

MANUAL CALL POINT

6 HOOTERS 10 Number

FAULT ISOLATOR MODULE MAKE

7 8 Number

ADWARDS FOR AF OF CHP

ADDRESSABLE CONTROL

8 MODULE WITH FLASHSCAN 8 Number

MODEL:FCM-1 NOTIFIER MAKE

INTELLIGENT ADDRESSABLE

9 FIRE ALARM AND ANNUNCIATION 8 Number

DIGITAL TEMPERATURE

10 2 Number

CONTROLLER

 Technical Specification of Material

 Sr.No.-1 Intelligent Addressable Fire Alarm Control Panel,

Model No.: NFS

Make : NOTIFIER by Honeywell.

Microprocessor based 1 loop capacity analogue Addressable Fire Alarm Control Panel with minimum

80 characters LCD display, 800 event plus 200 alarm log history events, QWERTY keypad for

programming. The panel should be equipped with sufficient numbers of loops considering 20% spare

capacity in each loop. Each Loop shall have a capacity of minimum 300 analog addressable devices.

The panel shall work in degrade mode in case of CPU failure. Four access levels, flash EPROM,

BIDDER’S SIGN WITH SEAL

RFQ- 75147E Page

volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for

hours normal working and 30 mins in alarm condition. Designed to meet UL 864, 10th Edition.

(1) Certified for seismic applications when used with the appropriate seismic mounting kit.

(2) Approved for Marine applications when used with listed compatible equipment. See DN-

(3) One isolated intelligent Signaling Line Circuit (SLC) Class A, B, or X.

(4) Wireless fire protection using SWIFT Smart Wireless Integrated Fire Technology. See DN-

(5) Up to 159 detectors and 159 modules per SLC; 318 devices maximum.

(6) Detectors can be any mix of photo, thermal, or multi-sensor; wireless detectors are available

for use with the FWSG(A).

(7) Modules include addressable pull stations, normally open contact devices, two-wire smoke

detectors, notification, or relay; wireless modules are available for use with the FWSG(A).

(8) Standard 80-character display.

(9) Network options:

- High-speed network for up to 200 nodes (N16e/x, NFS2-3030,NFS2-640, NFS-320(C), NFS-

320SYS, NCD, NCA-2, DVC-EM,ONYX Works, NFS-3030, NFS-640, and NCA).

- Standard network for up to 103 nodes (N16e/x, NFS2-3030,NFS2-640, NFS-320(C), NFS-

320SYS, NCD, NCA-2, DVC-EM,ONYX Works, NCS, NFS-3030, NFS-640, NCA, AFP-200, AFP-

300/400, AFP-1010, and AM2020). Up to 54 nodes when DVCE is used in network paging.

(10) 6.0 A power supply with four Class A/B built-in Notification Appliance Circuits (NAC).

(11) Built-in Alarm, Trouble, Security, and Supervisory relays.

(12) VeriFire Tools online or offline programming utility. Upload/ Download, save, store, check,

compare, and simulate panel databases. Upgrade panel firmware.

(13) Auto programming and Walk Test reports

(14) Multiple central station communication options:

(a) Standard UDACT

(b) Internet

(c) Internet/GSM

(15) 80-character remote annunciators (up to 32).

(16) EIA-485 annunciators, including custom graphics.

(17) Printer interface (80-column and 40-column printers).

(18) History file with 800-event capacity in nonvolatile memory, plus separate 200-event alarm- only

(20) Presignal /Positive Alarm Sequence (PAS).

(21) Silence inhibit and Auto Silence timer options.

(22) NAC coding functions:

(23) March time.

(24) Temporal

(25) California two-stage coding.

(26) Canadian two-stage.

(27) Strobe synchronization.

(28) Optional cloud connectivity for remote off site monitoring through CLSS (see HON-62034)

(29) Monitor multiple buildings through one off-campus central station,and report through the CLSS

(30) Optional remote programing through CLSS

(31) Field-programmable on panel or on PC with VeriFire ? Tools program check, compare, simulate.

(32) Full QWERTY keypad.

(33) Battery charger supports 18 ? 200 AH batteries.

(34) Non-alarm points for lower priority functions.

BIDDER’S SIGN WITH SEAL

RFQ- 75147E Page

(35) Remote ACK/Signal Silence/System Reset/Drill via monitor modules.

(36) Automatic time control functions, with holiday exceptions.

(37) Extensive, built-in transient protection.

(38) Powerful Boolean logic equations

Power Supply : 240 V AC power supply

Make : NOTIFIER by Honeywell only

Model No.: NFS

 Sr.No.- 2 Active Repeater Panel

Model No.: LCD2

Make : NOTIFIER by Honeywell

Active Repeater Panel with 80 Characters Liquid Crystal Display with backlit control.

(1) 80-character backlit Liquid Crystal Display (20 characters x 4 lines).

(2) Display mimics panel or NCA:

- Event message.

- 20 characters for point label.

- 12 characters for extended label.

- Time, date and point address.

(3) Control switches for System Acknowledge, Signal Silence Drill and System Reset.

(4) LEDS for general off-normal events with UL 864 9th Edition Panels.

NOTE: The LEDs are only applicable when used with UL864 Ninth Edition listed panels: NFS-320,

NFS2-640, NFS2-3030, and NCA-2.

(VeriFire Tools 6.90 or higher required to program points.)

(6) Up to 6000 foot segments between units.

(7) Local piezo sounder with alarm/trouble resound.

(8) Displays all analog, addressable points.

(9) Displays device type identifiers.

(10) Displays device and zone custom alpha labels LCD2-80 mounts with any CHS-4 chassis slot

(11) Slide-in label can be customized.

(12) Flush/surface/panel mount option.

(13) LCD2-80 displays time, date, and custom messages received from the compatible panel or

network annunciator.

(14) LCD2-80 is 8.25" (20.96 cm) high, 4.375" (11.11 cm) wide, and 1.75" (4.45 cm) deep.

(15) Up to 32 LCD2-80s may be used on one EIA-485 circuit.

Power Supply : 24 V DC

Make : NOTIFIER by Honeywell only

Model No.: LCD2

 For Item Sr.No:-3 Addressable Photoelectric Smoke Detector

Model No.: FSP

Make: NOTIFIER by Honeywell.

Addressable Photoelectric Smoke Detector with sensitivity range of 0.5 to 4.0% obs/ft. The detector

shall have group decision technology for faster response & avoid false alarms. The detector shall have

twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches.

Designed to meet UL268, 7th Edition. The intelligent photoelectric smoke detector shall use the

photoelectric (light-scattering) principal to measure smoke density and shall, on command from the

control panel, send data to the panel representing the analog level of smoke density.

BIDDER’S SIGN WITH SEAL

RFQ- 75147E Page

A.SLC LOOP:

(1) Two-wire SLC loop connection

(2) Unit uses base for wiring

(3) Compatible with Flash Scan and CLIP protocol systems

(4) Stable communication technique with noise immunity

B. ADDRESSING:

(1) Addressable by device

(2) Rotary, decimal addressing (Refer to the NOTIFIER panel manuals for device capacity.)

C. ARCHITECTURE:

(1) Sleek, low-profile, stylish design

(2) Unique single-source design to respond quickly and dependable to a broad range of Fires.

(3) Integral communications and built-in device-type identification

(4) Built-in tamper resistant feature

(5) Remote test feature from the panel

(6) Walk test with address display (an address on 121 will blink the detector LED: 12- [pause]-1

(Flash Scan systems only)

(7) Built-in functional test switch activated by external magnet

(8) Removable cover and insect-resistant screen for simple field cleaning

(9) Expanded color options

D. OPERATION:

(1) Designed to meet UL 268 7th Edition

(2) Factory preset at 1.5% nominal sensitivity for panel alarm threshold level.

(3) LED blinks when the unit is polled (communicating with the fire panel) and latches in alarm.

(4) Low standby current

E. MECHANICALS:

(1) Sealed against back pressure

(2) SEMS screws for wiring of the separate base

(3) Designed for direct-surface or electrical-box mounting

(4) Plugs into separate base for ease of installation and maintenance

TECHNICAL SPECIFICATION

1. Designed to meet UL268 7th Edition.

2. Modern profile with White color for improved aesthetics.

3. Sensitvity Range of 0.5% to 4.0% obs/ft

4. Stable communication technique with noise immunity.

5. Low standby current. 200 micro Amps @ 24 VDC

6. Two-wire SLC connection.

7. Rotary, decimal addressing

8. Dual bi-color LED design providing 360 viewing angle.LEDs blink green in normal condition and

illuminate steady red on alarm

9. Remote test feature from the panel.

10. Walk test with address display

11. Built-in functional test switch activated by external magnet.

12. Built-in tamper-resistant feature.

13. Sealed against back pressure.

14. Expanded color options.

BIDDER’S SIGN WITH SEAL

RFQ- 75147E Page

15. Optional relay, isolator, and sounder bases.

 For Item Sr.No:- 4 Addressable Rate of Rise Heat Detector

Model No.: FSP 951 R

Make : NOTIFIER by Honeywell

Addressable Rate of Rise Heat Detector rated at 8.3 deg C/min. The detector shall have twin bi-colour

LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches.

The intelligent thermal detectors shall be addressable devices rated at 135 degrees Fahrenheit (58

degrees Celsius) and have a rate-of-rise element rated at 15 degrees F (9.4 degrees C) per minute. A

high heat thermal detector rated at 190 degrees Fahrenheit (87.8 degrees Celsius) shall also be

available. The thermal detectors shall connect via two wires to the fire alarm control panel signaling line

A.SLC LOOP:

(1) Two-wire SLC loop connection

(2) Unit uses base for wiring

B. ADDRESSING:

(1) Addressable by device

(2) Rotary, decimal address in (Refer to the NOTIFIER panel manuals for device capacity.)

C. ARCHITECTURE:

(1) Designed to meet UL 268 7th Edition

(2) Sleek, low-profile, stylish design

(3) State-of-the-art thermistor technology for fast response

(4) Integral communications and built-in device-type identification

(5) Built-in tamper resistant feature

(6) Built-in functional test switch activated by external magnet

D.OPERATION:

(1) Fixed temperature model (FST-951) factory preset to 135 F (57C)

(2) Rate-of-rise model (FST-951R),15 F (8.3 C) per minute

(3) High-temperature model FST-951H) factory preset to 190 F (88 C)

(4) 360 deg field viewing angle of the two visual alarm indicators, LEDs blink red in Normal condition

and turn on steady red in Alarm

(5) LEDs blink every time the unit is polled

E. MECHANICALS:

(1) Sealed against back pressure

(2) SEMS screws for wiring of the separate base

(3) Designed for direct-surface or electrical-box mounting

(4) Plugs into separate base for ease of installation and maintenance

(5) Separate base allows interchange of photoelectric, ionization and thermal sensors

F.OTHER SYSTEM FEATURES:

(1) Remote test feature from the panel

(2) Walk test with address display

BIDDER’S SIGN WITH SEAL

RFQ- 75147E Page

(3) Low standby current

G.OPTIONS:

(1) Remote LED output connection to optional RA100Z remote LED annunciator

TECHNICAL SPECIFICATION

1. Modern profile with White color for improved aesthetics.

2. Advanced thermal technology for fast response.

3. Fixed temperature model factory preset to 135 F

4. Rate of Rise model preset to 15 F/min

5. High temperature model factory preset to 190 F

6. Low standby current. 200 micro Amps @ 24 VDC

7. Two-wire SLC connection.

8. Rotary, decimal addressing

9. Dual bi-color LED design providing 360 viewing angle.LEDs blink green in normal condition and

illuminate steady red on alarm .

10. Remote test feature from the panel.

11. Walk test with address display

12. Built-in functional test switch activated by external magnet.

13. Built-in tamper-resistant feature.

14. Sealed against back pressure.

15. Optional relay, isolator, and sounder bases.

 For Item Sr.No.5 Supply of Intelligent Addressable Manual Pull Station,

Make: Notifier

Model: NBG -12 LX

 For Item Sr.No.6 Supply of Hooter, Make: Notifier, Model: HR/P2RL

 For Item Sr.No.7 Supply of Fault Isolator Module , Make: Notifier, Model: ISO- X

 For Item Sr.No.8 Supply of Intelligent Addressable Control Module, Make: Notifier, Model:

 For Item Sr.No.9 Supply of Intelligent Addressable Monitor Module, Make: Notifier,

Model: FMM-1

 For Item Sr.No.10 Supply of Digital Tempreture Controller, Make:-Masibus, Model:-5006-

RN, Control Type-On-Off, Output Type-Relay, Input Type-RTD, ISO

Latest Certification of Manufacturer-Yes, Performance Parameter:-Frequency-50 Hertz &

Voltage-230 Volt & Dimensions-Size (mm) 96 x

 GENERAL TERMS AND CONDITION

1) Bidder should must produce certificate of Authorized Dealership Certificate of Notifier, Honywell.

OR You have to submit Manufacturers Authorization form (MAF) of Notifier, Honywell.

2) Bidder should submit the LATEST product catalogue & detailed specification of offered

materials along with the offer.

3) Material should be offered and supply as per our technical specification and Make and Model

4) Party has to submit Guarantee / Warranty certificate for supply of materials against the any

Manufacturing defect / poor workmanship / faulty design for the period of 12 months along with

the supply.

5) In case of any defects reported to Bidder / contractor the same should be replaced /rectified

within 15 days without any extra cost.

BIDDER’S SIGN WITH SEAL

RFQ- 75147E Page

6) Payment will be released as per GSECL standard terms and conditions as after supplying of

material at WTPS main store.

7) Bidder shall have to submit the sample before bulk supply for approval. (For Item Sr.No.-

8) Bidder shall have to submit the test certificate before bulk supply for approval.(For Item

9) The supply material should be one to one replacement with existing system.

10) The supplied material along with sample should be marked / embossed with manufacturing

brand name / trade mark &, without which material will be rejected.

11) Delivery period: Within 3 Months from date of LOI.

Chief Engineer (C&O)

GSECL, WTPS

BIDDER’S SIGN WITH SEAL

RFQ- 75147E Page

DECLARATION FORM

ON LETTER HEAD OF SUPPLIER

Subject: Supply of Fire Alarm system spares at WTPS.

Reference No.:- WTPS/S/TECH/RFQ - 75147E/EMD Colony

1. I/We hereby declare that I/We have carefully & thoroughly studied the entire tender placed on

the website and General terms & conditions, technical specification, PQR and other documents

of the tender mentioned under reference along with the Commercial terms and conditions.

2. I/We hereby confirm and certify that the offer submitted by me/us is strictly in accordance with

the GSECL’s Tender specifications, Guaranteed Technical Particulars and drawing as

mentioned in the Tender Specifications. There is no commercial or Technical deviation (except

the deviations shown in respective Annexure-12 of Technical Deviations of this tender

document) in the offer from the Board’s Tender Specification. I undertake to abide by the

GSECL’s Technical specification / Guaranteed Technical Particulars / Drawing, I undertake to

supply materials strictly as per the GSECL’s Technical specification / Guaranteed Technical

Particulars / Drawing, even if any technical deviations are mentioned by me. I also undertake

to abide by all commercial conditions of the GSECL, including delivery schedule. I have

submitted all the annexure-1 to 15,form of integrity pact etc along with the technical Bid dully

filled along with all the details”

3. I / We, hereby declare that our Technical Bid is strictly in line with the Tender specifications

(except the deviations shown in Annexure-12 of Technical Deviations of this tender document).

4. I / We also agree that additional conditions / deviations, if any, found in the Commercial terms

& conditions (except the deviations shown in Annexure-12 of Technical Deviations of this

tender document) our offer shall be out rightly rejected without assigning any reason thereof.

5. I/We hereby abide to execute the contract agreement & submitted the same along with the

acceptance of LOI and the same will be acceptable to me/us.

6. I/We hereby accept and confirm that any dispute on this regard shall not be entertained by the

7. The full value of the “Earnest Money Deposit” paid herewith should be absolutely forfeited to

the Corporation, should I/ we do not deposit the specified amount of specified Security Deposit

within 10 Days from receipt of the Letter of Intent.

8. If, I fail to submit all required documents with application or tender copy ( in each tender ) then

my tender will be cancelled, which is binding to me.

authorized signatory of M/s ______________________________________________ here by

certify that M/s _________________________________________________ and their

proprietor / any partner / any directors of the firm is not stop deal and / or banned for business

dealing and / or black listed by GUVNL and / or their any subsidiary company viz. GSECL /

GETCO / DGVCL / MGVCL / UGVCL / PGVCL as well as Government and / or Semi

Government company / department.

10. We here by confirm that we have not stake in one or more other agencies / bidders who are

participating in same tender and if it is found that the submitted information / declaration are

wrong in the tender / enquiry as stated in tender terms, than we will be disqualified

automatically &it will be accepted to us. EMD / SD will be forfeited. More over if GSECL shall

take stern action including stop dealing with our firms which is also accepted to us

Seal of the Firm Signature of the Tenderer with Designation.

BIDDER’S SIGN WITH SEAL

RFQ- 75147E Page

<On the letterhead of the vendor/ payee>

To, Date : __________

Subject : Declaration for TDS/TCS under the Income Tax Act (IT Act)

Reference : Provisions of S. 206AB/ 206CCA/139AA of the IT Act

Dear Sirs,

This is with reference to the determination of appropriate Tax deduction at source (TDS) or Tax

collected at source (TCS) as per the provisions of the Act i.e. Section 206AB/ 206CCA/139AA of the IT

Act. In relation to the said provision of the Act: I / We, having status of <<mention status i.e.

Individual/Company/ Firm etc.)>>hereby declare and confirm that: -

a) I/We have<<mention PAN>>Permanent Account Number (PAN) under the IT Act.(Copy of

PAN card is enclosed herewith.)

b) I/We have linked / will be linking Aadhar number with PAN as required under section 139AA (2)

read with Rule 114AAA.latest by 30th June

c) I/We have/have not filed income tax returns (ITR) for two previous years immediately prior to

the year in which tax is required to be deducted and for which last date of filing of income tax

return is expired u/s139(1) of the Act.

I/ We am/ are hereby attaching a copy of acknowledgment of ITR filed for any one of previous

two financial years of which due date u/s139(1) is expired, as proof of filing ITR. (Strike out full

sentence if not filed IT returns)

d) The aggregate amount of Tax Deductible at Source (TDS) and Tax Collectible at Source (TCS)

exceed/don’t exceed Rs. 50,000 or more in each of the two aforesaid previous years in my/our

case (Vendor has to provide the extract of its Form 26AS if copy of ITR is not provided as

e) I/ We shall, indemnify the Company for any consequences arising out of any acts of commission

or omission including incorrect declaration basis which the Company would act upon.

I/We agree that Company shall determine applicability of section 206AB/206CCAof the IT Act

based on the aforesaid declaration/documents filed by me/us and would deduct TDS/TCS

accordingly. The decision of Company shall be final and acceptable to me/us. Strikeout

whichever is not applicable.

Thanking you,

Yours faithfully,

<<Signature>>

< Full Name of Vendor & seal >

BIDDER’S SIGN WITH SEAL

RFQ- 75147E Page