PROVN OF EXERCISE TRAINING DEMOLITION PRACTICAL SHELTERED ENTRY TO RBU DECK AND MACHALIMAR BLOCK BLDG NO P 38 A AND B AT ASW SCHOOL AND CERTAIN OTHER SANCTIONED WORK

Amount

M&L for Complete removal of existing treatment of external wall using water jet, mechanical grinders including rubbing, washing down with water, etc. and applying two coats of weather proof (antifungal) paint over a coat of suitable exterior primer and 2mm thick wall care putty complete all as specified and as directed by the Engineer-In-Charge. Note:- Application of paint and primer shall be as per manufacturer's instruction. The quoted rate shall include cost of scaffolding as required.

M&L for complete removal of old finished surfaces of walls including washing rubbing down and stopping of distempered and painted and applying two coats of distemper oil emulsion over and incl a coat of suitable exterior primer and 2mm thick wall care putty complete all as specified and as directed.

M&L for complete removal of old finished surfaces of walls including washing rubbing down and stopping of distempered and painted and applying two coats of distemper oil emulsion over and incl a coat of suitable primer and 2.0mm thick wall care putty including filling of nail holes/disturbed surface by cementitious wall care putty complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion over and incl a coat of suitable primer and 2.0mm thick wall care putty including filling of nail holes/disturbed surface by cementitious wall care putty complete all as specified and as directed.

M&L for preparation of old decorated surfaces of wall including cornices (plastered or unplastered) and applying two coats of white wash complete all as specified and as directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for preparation new plastered External surfaces of wall and applying two coats of weather proof paint (antifungal, Asian Ultima Protek or Equivalent) over a coat of suitable exterior primer and 2mm thick wall care putty complete all as specified and as directed by the Engineer-In-Charge. Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction.

Taking down cement plaster of any description on brick work or stone masonry walls including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.

M&L 10mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L 15mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L 10mm thick rendering in cement mortar (1:3) on concrete ceiling surfaces , finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface.

M&L for PCC (1:3:6) type C1 (Using 20mm graded stone aggregate) as in cills, copings, bed blocks for hold fasts and the like complete all as specified and directed.

S&F mild steel work in framing, purlin using section such as angle, hollow pipes , flats , etc using Fe-290 Grade E-165 complete.

S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge , Gutter, Gable flashing, corner flashing etc, fixed with self tapping screws as specified and directed.

S&F Pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for preparation of new surfaces of steel and two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in repair 110mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches/floor or fixed to wall including necessary clamps complete all as specified and directed by Engr-in-Charge.

S&F 180 mm width rectangular PVC SWR ready made eaves gutter of pressure rating 6 Kg/cm2 of approved make including necessary fitting like bend WC/MS Clips etc complete all as specified.

Excavation in trenches not exc. 1.5 Metre wide and not exc. 1.50 Metre in depth for Foundation etc. not exc 10 Sqm on plan and getting out as in Soft/Loose Soil, complete all as specified and as directed.

Removing excavated Material (Soil) to a distance exc 250m but not exc. 500.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the starting point, complete all as specified and as directed.

Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm as in Soft/Loose Soil, complete all as specified and as directed.

M&L Plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation all as specified and directed

M&L for precast cement concrete block masonry in type C1, 1:3:6 (20 mm graded stone aggregate) with solid blocks exc 10 cm in width and setting in cement mortar 1:6 in foundation load bearing wall and wall complete all as specified and directed.

M&L RCC (Nominal mix ) type B1 1:2:4 (20MM graded aggregate ) for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

M&L RCC (1:2:4) type B-1 (Using 20mm graded crushed stone aggregate) as in slabs, shelves supported on walls, beams and columns in floor or roof including balconies, canopies, deck slabs or in Chajja/facia projection and the like complete all as specified and directed by Engr-in-Charge.

M&L for use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick for fair finished surfaces (Horizontal or sloping) complete all as specified and directed by Engr-in-Charge.

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; for flat rough finished cement concrete complete all as specified and directed.

M&L for Mild steel TMT (CRS) bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, RETAINING WALLS hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde E 250) Quality A or Fe-290 (Gde E-165) complete all as specified and directed

All as per item No.29 above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

M&L for 10mm thick rendering in cement mortar (1:4) on fair faces of concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Material & Labour for preparation of new external plastered surfaces of wall and applying two coats of weather proof (antifungal) paint over a coat of suitable primer complete all as specified and as directed by the Engineer-In-Charge. Note:- Application of paint and primer shall be as per manufacturer's instruction. The quoted rate shall include cost of scaffolding as required.

M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) stone slab as in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust to match with marble shade over and including cement screed bed 15mm thick in CM (1:6) complete all as specified and directed by Engr-in-Charge.

M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

M&L Welded steel wire fabric weight n exc 4 kg/sqm fixed to steel members complete all as specified and directed.

M&L for Cement concrete 1:2:4 type B- 1, (20mm graded stone aggregate) for kerb, chamfered on edges complete all as specified and as directed.

M&L for 75 mm thick PCC 1:4:8, Type D-2 using 40 mm graded stone aggregate complete all as specified and directed.

M&L for Hard-core of broken stone of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface complete all as specified and as directed.

M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M & L for chequered colour cement concrete tiles 30x30cmx 25mm thick set jointed grey and pigment and pointed in neat cement slurry in floors/steps including screed bed or bedding layer of mortar 15mm thick in cm 1:4 complete all as specified and directed

M&L for joint free coloured Non Skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and incl 15mm thick screed bed of CM 1:6 all as specified and directed.

M&L for joint free coloured Non Skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in wall surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and incl 10mm thick rendering of CM 1:3 all as specified and directed.

Dismantling single layer Mangalore pattern or similar tiles in roofing complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness complete in roofing complete all as specified and as directed.

Dismantling battens for tiles, shingles, etc of any size exceeding 15cm spacing including tilting fillets complete all as specified and as directed.

Dismantling timber boarding any description fixed in any position with nails complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/blankets, any thickness including cover fillets complete all as specified and as directed..

S&F for Powder coated aluminium snap grid frame work for false ceiling ( on frame work of Aluminium angle 25x25x2 mm, Main TEE 38x25x1.5 mm and cross TEE 25x25x1.4 mm and size of grid 605x605 mm) fixed to walls with rawl plugs and screws and hang to roof members with 6mm dia GI wire (upto 1200mm length max) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long with and including 12mm thick mineral fibre ceiling board insert (Density 260 Kg/m2) of Make : Armstrong or equivalent of size 595x595mm complete all as specified and directed by Engr-in-Charge.

Dismantling timber scantling 40 Sqcm and over in section unframed work in any position complete all as specified and as directed..

M&L for 2nd class hard wood in scantling clean sawn fixed as in purlins, rafters, etc in roof complete all as specified and as directed..

M&L for IInd class hard wood boarding clean sawn with butt joints, 20mm thick as in soffits of gutter, eves board fixed with nails, etc complete all as specified and as directed..

M&L for 2nd class hard wood clean sawn batten for tile at 30cm centres of sectional area exc 15Sqcm and n.exc 25Sqcm complete all as specified and as directed..

S&F 0.63mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with 'L' type or 'J' type hook bolts and washers in roofs with grade of zinc coating 275

S&F Plain Aluminium sheeting 0.71mm thick, Alloy 31000H4 in ridge, hips, valley gutter, drip and straight flashings.

M&L for Mangalore pattern roof tiles interlocking at side joints laid dry complete all as specified and as directed..

All as per Item No. 18 above, but except tiles complete all as specified and as directed..

M&L for ridge or hip tiles to suit Mangalore pattern of roofing tiles bedded and jointed in CM 1:6 complete all as specified and as directed.

All as per Item No. 20 here-in-before but except tiles complete all as specified and as directed..

Taking down rainwater pipe, eaves gutter and AC vent pipe of any size including AC gutters, walls etc incl all fittings complete all as specified and as directed.

S & F EURO GUARD PRO SQUARE UPVC RAINWATER GUTTER (220 MM), with all necessary fittings like MS flat iron, clamp, joints, end cap, corner drop, centre drop, etc complete all as specified and as directed.

S&F PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls 110mm bore complete all as specified and as directed..

S&F PVC (SWR) bends any radius to fit 110mm bore pipe with access door complete all as specified and as directed..

Dismantling structural steel work such as brackets for rain water pipe, gutter, etc. complete all as specified and as directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L for preparing and treating tiles battens any size and spacing with one coat of creosote complete all as specified. (Measured overall in one side only spacers not deducted) complete all as specified and as directed.

M&L Preparation of new wood/wood based surface exc 10cm width/girth & apply painting two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed..

M&L point wiring with 1.5 Sqmm PVC insulated unsheathed FRLSH multistranded single core copper conductor cable in PVC concealed conduit rigid non metallic ( ISI marked ) fixed concealed on wall /roof except beam, column and RCC roof including chases cutting, white cover plate, flush metal box etc incl 1.5 Sqmm PVC insulated copper conductor as earth continuity wire for One light point controlled by one switch complete all as specified and as directed

All as per item No. 67 hereinabove but 2.5 sqmm copper conductor including 2.5 Sqmm copper cable on earth wire for 15 Amps socket outlet point controlled by one single pole switch on independent board complete all as specified and as directed by Engineer-in-Charge.

S&F switch modular 6 Amps 1 module 240 Volts single pole one way duly ISI marked complete all as specified and as directed

S&F switch modular 16 Amps 1 module 240 Volts single pole one way duly ISI marked complete all as specified and as directed

S&F Socket outlet modular type 16 Amps 3 pin combined 2 module duly ISI marked complete all as specified and as directed

S&F ceiling rose surface Bakelite 65 x 50 mm, 3 terminals white in colour duly ISI marked complete all as specified and as directed

S&F Fan Regulator, modular stepped type electronic rotary, 0-4 steps 100Watt, 240 Volt 50 Hz hum free 2 module white in colour complete all as specified and as directed

Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) incl provn of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to fan 1.5m for giving connection complete all as specified and as directed

S&F Factory made singe phase and neutral sheet steel made out of CRCA 1.2mm thick powder coated double door vertical distribution board 4 way dust and vermin proof fitted with two cover, one screwed cover for incoming and outgoing MCB's and second for protection of MCB's fitted with colour bus bar of capacity 200A, neutral link, earth bar and din rail suitable for use on 240V, 50Hz supply, partly immersed in wall and making good disturbed surfaces with matching colour complete all as specified and as directed.

S&F MCB SPN 32 Amp rating 240V, 10KA, 'B' curve in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

S&F MCB SP 6A - 32 Amp rating 240V, 10KA, 'B' curve in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

Classic Builders

M/s ANTONY THOMAS AND CO