Construction of City Gateway With Artistic Calligraphy Land mark gate Rainawari Chowk.

Civil Part

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil :

Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material upto a lead of 1 kilometer, as per direction of Engineer-in-charge.

Providing and laying Stone Soiling

P/L cement concrete of specified garde including curing but excluding the cost of centering and shuttering - all work upto plinth level: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

P/L cement concrete of specified garde including curing but excluding the cost of centering and shuttering - all work upto plinth level: 1:1/2:3 (1 cement : 1/2 coarse sand : 3 graded stone aggregate 40 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for: Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more

Steel rwork welded in built up sections/framed work, including cutting hoisting, fixing in position and applying a priming coat of approved stell primer using structural steel etc as required

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven storey height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffoldings for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding

Providing and fixing factory-made WPC (Wood Plastic Composite) Islamic Customised Calligraphic Jall of approved design, pattern, and shade, made from exterior-grade UV-stabilized WPC board of minimum density 650 kg/m³ and thickness 18 mm, suitable for outdoor use. The jall shall be CNC/laser-cut as per architectural drawing and fixed directly into the civil structure/frame using necessary brackets, anchor fasteners, stainless-steel screws, and washers, etc., complete as per direction of Engineer-in-Charge. The surface shall be finished with two coats of exterior-grade PU/weather-resistant paint over one coat of primer, including surface preparation, scaffolding, and all materials and labour complete

Providing and Laying Devri Stone Tile laid on 20mm thick cement mortar 1:4 mix including carriage complete job

Providing and Laying Devri Cornice Stone on Foundation Bed Periphery with 300 mm width and height as per directions of EIC.

Providing and flaing in position Glass Reinforced Concrete (GRC) decorative mouldings of approved make, in specified pattern, shade, and thickness. The moulding shall be straight, with projection of 300 mm and a height of 230 mm, flaed firmly to the structure with necessary brackets and fasteners at required spacing. The work shall include the cost of all materials, labour, T&P (Tools & Plant), scaffolding required for all heights and levels, and finishing the Joints with approved sealant. The work is to be completed in all respects as per the architectural drawings, specifications, and directions of the Engineer-in-Charge

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class deodar wood

Extra for circular works, such as in frames of fan light First class deodar wood

Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately) including fixing 50x12 mm beading complete with : First class deodar wood

Providing and fixing plained eaves boarding. 250x32 mm (nominal size) 2nd class Deodar wood

Providing and fixing a double-layered roof covering over existing wooden trusses, consisting of a profiled 0.5mm PGI sheet underlay and a top layer of handmade First Class Deodar wood shingles of size approximately 300mm x 150mm with a thickness tapering from 25mm to 6mm Shingles are to be lald in a break-joint pattern with a specified overlap (minimum 175 mm) as per the directions of the Engineer-in-Charge (EIC). First Class Deodar Wood

Providing and fixing of Polished brass architectural finlal, featuring a decorative segmented or bulbous shaft, surmounted by a crescent moon emblem and Islamic customisation, for installation on a minaret or dome, size shape and made to be approved as per directions of EIC.

Supply and Laying Maharaji Brick work (size:9" X 4" X 1.5") with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in lime surkhi 1:4 (1 lime: 4 surkhi) With grooves and pointing etc to the satisfaction of the EIC. sample to be approved by Technical Committee.

Brick work in foundation and plinth with non-modular bricks Cement mortar 1:4 ( 1 cement : 4 coarse sand)

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand)

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm

Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for underground structures as directed by Engineer-in-Charge and consisting of : i) 1st layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the levelling course (levelling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. ii) 2nd layer of 25mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with waterproofing compound in recommended proportions. iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer. 23.1.1 Using rough kota stone.

Providing and fixing Acrylic Sheet 3 mm thick of approved make, colour and shade in partitions/signage, including cutting, edge finishing, polishing, and fixing with aluminium beading, stainless steel screws/adhesives, scaffolding, transportation, and complete as directed by the Engineer-in-Charge.

Providing and fixing Glass Reinforced Concrete (GRC) mouldings of approved design, size, and profile, factory cast with GRC mix (1 part cement: 1.5-2 parts silica sand reinforced with alkali resistant glass fibre @4-5% by weight of cement, water, and approved admixtures). The mouldings shall be manufactured in approved patterns, properly vibrated, cured, demoulded, and finished smooth on all exposed faces. Fixing shall be done with stainless steel / galvanized anchors, adhesive mortar, necessary scaffolding, and complete as per architectural drawings and the direction of Engineer-in-Charge.

Providing and fixing Glass mossaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design, fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge:

Providing of foundation/inauguration stone at site of desired height with mechine maharaja bricks cladding including laying of stone soiling, cement concrete 1:4:8 mix & Cemenet Concrete 1:2:4 mix foundation concrete block of desired thickness & providing & fixing of black marble Stone with engraved letters as directed by Engineer Incharge at Site, Complete Job

Landscaping

P/L in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth Level With all kinds of soil 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)

Providing and laying rough chisel dressed Devri Stone in Kerb, of Size 200x200 mm face with Chamfer in cement Mortar 1:6 (1 cement : 6 Concrete) including curing.

Supplying and stacking of Good earth at site inluding royalty (earth measured in stacks will be reduced by 20% for payment)

Supplying, stacking, and spreading of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment)

Supply, and planting various plants and shrubs i/c digging 30cmx30cmx45cm pit, refilling, watering as per directions by EIC I/c all carriages all complete job Plant as per site requirement:

Providing and laying 60mm thick factory made cement concrete paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge.

Providing and fixing 10x10x7.50 cm Cobble stone block hand cut and chisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1cement:4 coarse sand) jointled with grey cement slurry mixed with pigment to match the shade of the stone including ruled pointing etc. complete as per direction of engineer-In charge

Provision of Utility Shifting

Carriage

Carraige for sand and aggregate

Carraige for good earth with lead of 15 km

Carraige for Bricks with lead of 20 km

Electric

Wiring for light point/ fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable Gi box and earthing the point with 1.5 sq.mm FRLS PVC Insulated copper conductor single core cable etc. as required.

Wiring for light point/Power Plug with 2x4 Sq.mm FRLS PVC Insulated copper Conductor single core Cable in surface/ recessed medium Class PVC Conduit along with 1 NO. 4Sq.mm FRLS PVCSpace insulated copper conductor single core cable for loop earthing as required .

Wiring for Circuit/Submain Wiring along with earth Wire with the following Sizes of FRLSPVC insulated copper conductor single core Cable in surface/Recessed medium class PVC conduit as required. 2X2.5 SQ.MM + 1X2.5 SQ.MM Earth Wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and amking good the same in case of the recessed conduit as required 25 MM

Supplying and Fixing suitable size G.I box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch,connection, painting etc. as required.

Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way (4+24), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole

MCB DP40-63 amp 10 K

Earthing with G.1. earth plate 600 mm X 600 mm X 6 mm thick Including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Supply Installation Testing and commissioning of 40-45 watt MONO linear washer made of aluminium version LED MCRET/SUMINOUST OSRAM SEOUL / SAMSUNG extern (1000mL put Power 40 watt Rated Input supply of Input Voltage 24V DC Luminaire Puminous fls Mineran 1440m IP protection rating IPSE THE minaire should have multiple beam angle options 20x55" as per site location with the help to frame/angle/nut bolts/ron Galvanized Razor Blade requirement includes all civil work for installation of lights at desired Wee for monkey meance as directed by Engineer-in-charge Atanulectures housing to all traceability authenticity. (LM70/LM801 certificate/report word Mark Name Engraved Embossing / Screen Printing on die cast with Sable warranty of product/accessories from OEM shall be submitted. The Minimum warranty shall be for 2 years. Job includes all civil work for installation of lights at desired location with the help to frame/angle/nut bolts etc as directed by Engineer-in-charge Make Philips, Wipro, L&T or equivalent Standard Make.

Supplying, installation, testing and commissioning of 20-25W linear 600MM Washer 3000K Product Family JS-RL, Type of Item Outdoor WallWasher Warranty 2 Years, Wattage 20-25w, IP Rating-IP65, LED Colour Temperature, White (6k)/Warm White (3k)/Neutral White Body Material Aluminium Die Cast, Beam Angle 15°/elliptical Product Dimensions in MM L-600mm x W-30 x H-30mm, Length 600mm. Width 30mmHeight, 30mm, Input Voltage, 12v/24v/220v, PRODUCT OPTIONS LED Colour Options, Neutral White (4k)

Supply installation testing and commissioning of 15 W updown lighter pressure die-cast aluminium housing with specially designed optics, provide uniform light distribution to redefine outdoors and enhance architural design with system efficacy of 100 lm/W.L70 life of 50000 Hrs. P.F.>0.95 with THD<10%, CCT 5700 K,CRI 70, Surge Protection 4 Kv. Input voltage range of 120V to 300V.Certification:- LM79 & LM80 test report should be from govt approved Inhouse NABL lab/ government of India authorised lab. Preffered make: Philips, wipro, endo equivalent make.

Supply installation testing and commissioning of 7W COBIP 65 narrow beam spot light (for calligraphy) IP66 Light with System efficacy of 100 Im/W.L70 life of 50000 Hrs. P.F.>0.95 with THD<10%, CCT 3000 K warm wite, CRI 90, Alimunium body, Surge Protection 4 Kv. Input voltage range of 120V to 300V.Certification:- LM79 & LM80 test report should be from govt approved Inhouse NABL lab/ government of India authorised lab, Peffered make: Philips, wipro, endo equivalent make.

S/L, testing and commissioning of PVC alluminium armoured cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments.Havell/Eq, standard make as directed by engineer incharge and making end termination with brass compression gland and aluminium Jees of required size 10 sq.mm 2 core

Supplying and laving of following size DWC HDPE pipe ISt marked along with all accessories like socket, bend, couplers etc. conforming to I5 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) Including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

Providing and fixing of Auto on/off panel. Single phase, astronomical lines based, contractor 1P/25A, MCB 25A, Surge protector (Spp Type), Pin rail enclosure, auxillary relay with all related accessories & hardware.