Construction of KGBV building at district CHHOTAUDEPUR.

Excavation for foundation in Loose or soft soil up to 1.5m depth

2 including sorting out, stacking of useful materials and disposing of 860.49 125.86 Cmt

the excavated stuff up to any lead.

Excavation for foundation in Dense or hard soil for depth 1.5mt to

3 3.0mt including sorting out, stacking of useful materials and 675.00 139.48 Cmt

disposing of the excavated stuff up to any lead.

Filling with the available excavated earth (excluding rock) in

trenches, plinth, sides of foundation etc. in layers not exceeding 20cm

in depth consolidating each deposited layer by ramming and

Filling foundation and plinth with murrum or selected soil in layers

5 of 20 cm. thickness inculding watering, ramming and consolidation 926.38 304.60 Cmt

Filling in plinth with sand under floors including watering ramming,

consolidating and dressing complete

Providing & Filling Cushion layer of compacted sand & Gravel

mixture below foundation concrete etc. comp As Per Drawing.

Applying general insecticide pest control treatment to floors,

cupboards etc including labour materials etc. complete. Using

Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075% concentration

by mass) is recommended 10.5ml chemical diluted with 5 liters of

water application 0.5 litre chemical /Sqm of surface is recommended

Providing & laying Cement Concrete 1:4:8 (1 Cement :4 Coarse sand

9 :8 hand broken stone aggregates of 40mm nominal size) in plinth and 125.64 2781.12 Cmt

curing complete excluding cost of formwork.

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse

10 sand : 4- graded stone aggregates 20 mm nominal size) and curing 92.64 3687.40 Cmt

complete excluding cost of formwork in (A) Foundation and Plinth

Providing upto floor two level precast cement concrete jali or grill

1:2:4 mix (1- Cement : 2- coarse sand : 4-graded stone aggregate

11 6mm nominal size) reinforced with 1.6 mm dia. Mild steel wire 100.00 739.89 Smt.

including roughening,cleaning, fixing and finishing in cement mortar

1:3 and curing complete.(E) 100mm thick

Providing & laying Controlled cement concrete M-150 and finishing

smooth with curing etc. complete including the cost of formwork but

excluding the cost of reinforcement for reinforced concrete work in

foundation footing base of columns and mass concrete.

Providing and laying controlled cement concrete M.200 and curing

complete excluding the cost of formwork and reinforcement for

reinforced concrete work in (A) Foundations, footings, Base of

columns and Mass concrete.

Providing and laying controlled cement concrete M-200 and curing

14 complete including the cost of formwork and reinforcement of 80.48 6343.25 Cmt

reinforced concrete work in for R.C.C. Coping, Curing etc comp.

Providing & laying Controlled cement concrete M-200 for

R.C.C.lintel including finishing smooth with curing etc. complete

including the cost of formwork but excluding the cost of

reinforcement.For all floors

Providing and laying controlled cement concrete M.200 for curing

complete including cost of formwork and excluding cost of

reinforcement for reinforced concrete work in R.C.C. Bend &

Vertical fins for all floors level. (Cement Level 360 Kg)

Providing & laying Controlled cement concrete M-200 for reinforced

concrete chhajjas not exceeding 10 cm thickness including finishing

17 the exposed surfaces with cement mortar 1:3(1 cement : 3 Fine sand ) 21.72 7465.62 Cmt

to give a smooth surface centering and formwork and curing complete

excluding cost of reinforcement.For all floors

Description Of Item Quantity Rate Unit Amount

Providing & laying Controlled cement concrete M-200 and finishing

smooth with curing etc. complete including the cost of formwork but

excluding the cost of reinforcement for RCC column work having

any cross sectional area .For all floors

Providing & laying Controlled cement concrete M-200 and finishing

smooth with curing etc. complete including the cost of formwork but

excluding the cost of reinforcement for RCC beam work having any

cross sectional area .For all floors.

Providing & laying Controlled cement concrete M-200 and finishing

smooth with curing etc. complete including the cost of formwork but

20 excluding the cost of reinforcement for R.C.C. work in slabs & Sunk 250.80 6935.77 Cmt

Slab having thickness more than 10 cm and upto 20 cm thickness.For

Providing & laying Controlled cement concrete M-200 and finishing

smooth with curing etc. complete excluding the cost of formwork but

21 excluding the cost of reinforcement for R.C.C. work in sloping slabs 21.81 7446.89 Cmt

& Staircase having thickness more than 10 cm and upto 20 cm

thickness.For all floors

Providing & laying Controlled cement concrete M-250 and finishing

smooth with curing etc. complete including the cost of formwork but

excluding the cost of reinforcement for reinforced concrete work in

foundation footing base of columns and mass concrete.

Providing & laying Controlled cement concrete M-250 and finishing

smooth with curing etc. complete including the cost of formwork but

excluding the cost of reinforcement for RCC column work having

any cross sectional area .For Column Up to Plinth & all floors.

Providing & laying Controlled cement concrete for plinth beam(tie

beam) with M-250 cement concrete including finishing smooth with

curing etc. complete including the cost of formwork but excluding the

cost of reinforcement for any cross sectional area of beam.

Providing and laying and fixing 50 mm thick expansion joint by

hydro cell semi rigid UV resistance with high performance laminated

closed cell polythene foam joint filler in sheet foam as directed, etc.

Providing I.S.I. T.M.T Bars Fe.500D steel reinfocement (ISI mark)

#REF! Confirmed to IS-1786 for R.C.C.work including Cutting, bending, 114750.00 77.29 Kg.

binding and placing in position etc. complete.For all floors

Providing formwork with sheathing of steel sheet so as to give a fair

finish including centring, shuttering, strutting and propping etc.,

height of propping and centring below supporting floor to ceiling not

#REF! exceeding 4m and removal of the same for in situ reinforcement 98.64 98.84 Smt.

concrete and plain concrete work in stair cases with sloping or

stepped soffits including risers and stringer excluding landing etc.

complete.(Landing Shall be paid in Relevent Item)

Brick work using common burnt clay building bricks having crushing

#REF! strength not less than 35 kg./Sq.Cm. in foundation and plinth in 202.81 4279.98 Cmt

Cement Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly Ash Bricks

Brick work using common burnt clay building bricks having crushing

strength not less than 35kg/Sqcm. in Super Structure. In cement

mortar 1:6 (1 cement : 6 fine sand)

(C) Fly Ash Bricks

Masonry work with aerated light weight concrete Blocks of size

60cm x 23cm x 23cm or any other approved size, having crushing

strength @ 35 kg/sqcm Fixing with ready-mixed mortar

('Fixoblock'of M/s Ultratech cement Ltd./Rapid Fix/Lion) having

tensile adhision strength >0.8 N/mm2 and compressive strength of

>2N/mm2.The mortar is to be fixed in a thickness of 3mm to 5mm on

the clean and leveled surface of blockmasonry using proper trowel.

For all floor and lead and lift For superstructure.

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/sq.cm in cement mortar 1:4 (1

cement : 4 coarse sand) in super structure including curing etc.

complete.For all floors

Description Of Item Quantity Rate Unit Amount

Providing 10mm thick cement plaster in single coat on brick/concrete

walls for RCC Ceilling & Soffit of stair interior plastering including

finishing with a floating coat of neat cement slurry in cement mortar

1:4(1 cement 4 sand) watering, curing etc. complete.For all floors

Providing 15mm thick cement plaster in single coat on rough or fair

side of single or half brick wall for interior plastering including

finishing with a floating coat of neat cement slurry in cement mortar

1:4(1 cement 4 sand) watering, curing etc. complete.For all floors

20mm thick sand faced cement plaster on walls above ground level

consisting of 12mm thick backing coat of cement mortar 1:3(1

cement 3 sand) and 8mm thick finishing coat of cement mortar 1:1(1

cement 1 sand) watering, curing etc.complete for any Height.

Providing and fixing Chicken mesh jali (22 gauge)30cm wide at the

junction of 2 different surfaces of different material component at the

time of plastering to prevent cracking in plaster surface as and where

directed at all floors with all leads and lifts etc.complete.

Providing cement vata (10 cm X 10 cm size) quartar round in cement

mortar 1:1 including neat cement finishing, watering etc. complete

Respectely plaster acitivity shall be commenced only after completion

Providing 15mm thick (water chemical componant ) cement plaster in

single coat on rough or fair side of single ,half brick wall or sunk slab

#REF! for interior plastering including finishing with a floating coat of neat 143.94 179.56 Smt.

cement slurry in cement mortar 1:4(1 cement 4 sand) watering, curing

etc. complete.For all floors

#REF! Providing throating or plaster drip and moulding to R.C.C. Chhajja. 251.36 44.07 Rmt.

Providing & fixing G.I rain water Spout of 65mm dia and 60cm

providing & laying cement water proofing of average 115mm thick

for terrace for all floors using first layer cement mortar (1:3) over an

exsisting surface second layer of arranging brick bats acording to slop

adding suitable chemical to make water tieght & again third layer of

cement mortar 1:3 on above including adding water proffing

compound and finishing top with net cement slury using cement @

2.75 kg/sq mt. making any patterns and design on the top etc.

complete as directed.

Providing & Laying Broken China Mosaic flooring for plain & curve

surface 12mm to 20mm of broken piece of ceramic tiles or Glazed

tiles ( one or more colour as directed by Engg. In charge ) to be laid

over cement mortar bedding of CM 1:3 to plain or and slopes and to

#REF! be tempered to bring mortar cream up to and colour pigment 820.65 779.70 Smt.

including rounding of junctions and extending them pu to 15cms

along the wall and curing with bends any patterns of designs as per

deawing or directions including cleaning with water and oxilic acid

using 1 kg / 1 bag of water proofing materials.

Providing and laying cement concrete flooring 1:2:4 (1 cement :

#REF! coarse sand : 4 stone aggregate 20mm nominal size) laid in one layer 90.75 304.39 Smt.

finish with a floating coat of neat cement (A) 40 mm. For Ramp.

25mm thick polished Kota stone flooring/staircase treads (two pieces

with three groves in front of steps) over 20mm (average) thcik base of

#REF! cement mortar 1:6 (1 cement 6 coarse sand) laid over and jointed with 499.50 1019.39 Smt.

grey cement slurry including curing, rubbing, and polishing etc.

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in

flooring treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush

pointing in white cement complete for antiskit

White glazed tiles 6mm thick in flooring, treads of steps and landings

#REF! laid on a bed of 12mm thick cement mortar 1:3(1 cement : 3 coarse 109.46 964.48 Smt.

sand) finishing with flush pointing in white cement.

Providing and laying white glazed tiles 6mm thick in skrting risers of

#REF! steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3- 466.46 1017.48 Smt.

coarse sand) and jointed with white cement slurry

Description Of Item Quantity Rate Unit Amount

Providing and laying tactile tile (for vision impaired persons as per

standards) of size 300x300x9.8mm having with water absorption less

than 0.5% and conforming to IS:15622 of approved make in all

colours and shades in for outdoor floors such as footpath, court yard,

multi modals location etc., laid on 20mm thick base of cement mortar

1:4 (1 cement : 4 coarse sand) in all shapes & patterns including

grouting the joints with white cement mixed with matching pigments

etc. complete as per direction of Engineer-in-Charge.

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in proper line and level as per

guidlines of IRC : SP 63-2018 etc. Complete.

Providing and fixing pre-cast concrete kerb stone of gray cement

based concrete block 30cm length,30cm height and 15cm thick of

#REF! M250 grade concret as per approved design and including excavation 100.00 374.92 Rmt.

for fixing in proper line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

Providing & fixing average 25mm thick Double polished Kota stones

#REF! for shelves in cup board, seating plat form,Cutting in wall inclusive, 68.85 797.18 Smt.

including curing, rubbing, polishing etc. complete.

Providing and laying 14 mm to 18 mm thick mirror polished black

granite stone machine cut in single piece (Max. available) in sill and

jambs laid over 10 mm thick cemen mortar 1 : 3 (1 cement : 3 coarse

sand) and jointed with grey cement slurry with matching pigment

incl. rubbing and polishing half rounding edge both side etc.

complete colour and shed as approved by architect engineer in

Providing & laying Sandwich platform of maximum 700mm width

a) Sandwich type platform of top stone as 18 mm thick Granite of

approved shade and sample and bottom stone as 25 mm thick single

side polished kota stone with 25 mm thick screed of cement mortar

1:4 in between two stones. The stone shall be fixed by chasing in to

the wall surface and providing necessary MS supports of

50x50x6mm Angle or "T" (hot dip galvanised) and embedded in

between the two stones etc as per the drawing / specification and / or

as instructed of EIC complete and

b) 75 mm raised platform (Otli) at floor level with polished kota laid

on 50mm screed of (1:2:4) and skirting of kota stone as per design

and approved sample. The rate includes rounding, champhering and

mirror polishing of edges, facias of granite, MS supports, all material

labour and wastage, as per drawing, including necessary bonding

adhesive (if required) of Araldite or equivalent. Rate shall be also

inclusive of making holes & cutouts for SS sink, Oval wash basin,

Piller tap / Bib tap etc. as directed by engineer in charge. (Only

finished single side granite work shall be measured & paid for).

Construction of a Drinking water & wash facility platform 700 mm

wide of 18 mm thick black granite stone with 100 mm thick 1:2:4

ordinary conc. chajjali & brick masonary supports with waste pipe as

per the drawing and design etc. complete.

Providing and fixing door having side hung double shutter having

factory fabricated std. Extruded aluminium colour anodized hollow

section {Section 63.50 x 38 mm x 2.50 mm thick } for door frame,

hollow portion of door frame shall be filled with non teakwood wood,

#REF! with factory made 35 mm. Thick flush door both side pre laminated 84.99 4961.77 Smt.

with 6 Lever Mortice lock {Godrej or Equivalent), SS Aldrop, SS

Handle size 15 Cm Long, Tower Bolt size 20 cm etc. as per detail

colour & pattern approved by this office including necessary

anodized alluminum fixtures and fastenings.

Description Of Item Quantity Rate Unit Amount

Providing and fixing door having side hung single shutter having

factory fabricated std. Extruded aluminium colour anodized hollow

section {Section 63.50 x 38 mm x 2.50 mm thick } for door frame,

hollow portion of door frame shall be filled with non teakwood wood,

#REF! with factory made 35 mm. Thick flush door both side pre laminated 41.62 4758.97 Smt.

with 6 Lever Mortice lock {Godrej or Equivalent), SS Aldrop, SS

Handle size 15 Cm Long, Tower Bolt size 20 cm etc. as per detail

colour & pattern approved by this office including necessary

anodized alluminum fixtures and fastenings.

Providing and fixing window having extruded aluminum Colour

Powder Coated section frame main outer size 63.50 x 38.10 x

mm(of Jindal Section no:4605,@ Wt 1.094 Kg / Rmt), horizontal two

track member size 61.85 mm x 31.75 mm x 1.20mm (of Jindal

Section no: 8687 @ wt.of 0.695 Kg/mt), vertical member of size

61.85 mm x 31.75mm x 1.30 mm (of Jindal Section no:8758 @ wt.of

#REF! 0.0.659 Kg/mt) with sliding shutters of horizontal member size 40mm 157.87 1713.70 Smt.

x 18mm x 1.29mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt),

vertical member of size 40mm x 18mm x 1.29mm (of Jindal Section

no:8947 @ wt.of 0.456Kg/mt/ Section 8948, @ Wt. 0.457 Kg/mt)

with 5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc complete for window.

Providing and fixing STANDARD EXTRUDED

COLOUR ANODIZED ALLUMINIUM SECTION

window Frame main outer size 95mm x 24mm x1.17 mm (of Jindal

section no.2459@ wt. of 0.738kg/mt.) horizontal Three Track

member size 92mm x 31.75mm x 1.50mm (of Jindal Section

no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of horizontal

#REF! member size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical 20.32 5437.84 Smt.

member of size 40mm x 18mm x 1.29 mm @ Wt. 0.547 Kg/mt with

Two shutter 5mm thick transparent bronze colour tinted float glass &

One Shutter Stainless Steel Mosquito Wiresmesh (jali) with powder

coated aluminum fittings and fixtures and transparent silicon sealant

glass Fitting and Fixture & Fasteing etc Comp Colour As Directed by

Engineer in Charge

Providing and fixing standared extruded of alluminium section of

size 63.50 x 38.10 x 1.95 mm(of Jindal Section no:4605, @ Wt

1.094Kg / Rmt with colour Powder Coated alluminium frame with

mm thick transparent bronze colour tinted float glass with colour

anodized alluminium frame for ventilation with 5 mm thick frosted

glass as details etc complete for.window

Providing and fixing FRP frame size 100x50 mm and 28mm thick

FRP depress panel shutter having extra reinforcement on sides &

edges in Gel coat finish. The core of the shutter & frame is to be filed

up with injected fire retardant grade polyurethene foam done in situ

#REF! alongwith embedded wooden pieces for stiffening & also taking 52.92 2377.76 Smt.

hinges & fintures. The whole FRP frame & shutter is to be water

proof weather proof, termite proof & resistance to mild acid/alkali.

Rates are to be inclusive of S.S hinges with necessary screws &

alluminium fixtures & fastenings & fastener sleeve.

Providing, Fabricating and fixing SS hand rail / railing , gratings

ladder of 304 grade made out of round pipes, square or rectangle

sections in satin / brush finish including supporting fittings made out

of SS 304 grade solid rods ,flanges ,compatible SS anchor

fastener(mechanical or chemical) of Hilti or equvivalent as per

manufacturer's specifications, SS base plate, latth work ,argon arc

welding bending and bends as per the detail drawing with best (high)

#REF! quality finish & as per the a sample approved by Architect and as 202.80 830.36 Kg.

directed by engineer-in-charge.Rate shall be inclusive of all material,

labour and wastage. Railing shall be measured in KG & paid

accordingly. Actual visible material shall be meausered and no extra

shall be paid for consumable fastners.Suppliers to be approved by

a) Spiral Railing, Curved Railing, Hand rail , Railings , gratings,

Description Of Item Quantity Rate Unit Amount

Steel work, M.S Grill, welded in built up sections framed work

including cutting, hoisting, fixing in position and applying a priming

coat of read lead paint. (A)In beams and joists, channels angles Tees,

flats, with connecting plates or angle cleats as in main and cross

beams. Hip and jack rafters, purlins conneted to common rafters and

Providing & fixing in position mild steel door with ventilation frame

40x40x6 mm and shutter frame 35x35x5mm ,75x5 mm ms flate at

lock rail,10 mm square bar in vent at10 cm c/c coverd with

#REF! corrugated ms sheet 0.6 mm thick, including applying a priming coat 11.48 3718.05 Smt.

of read lead paint including cleanicn the surface of all dirt, dust and

other foreign matter (As directed by Engineer in charge& approved

drawing and design etc.)

Providing corrugated G.I. pre coated Sheets roofing fixed with

galvanized iron 'j' or 'L' hooks bolts and nuts 8 m. Diameter with

#REF! bitumen and G.i. Limpet washers filled with white lead complete 500.00 1161.84 Smt.

excluding the cost of purlins,Rafters and trusses.

(1) 0.80 mm Thick sheet

Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

mm diameter with jali of the following nominal diameter of self

cleansing design with C.I scread down or hinged grating including

the cost of cutting and making good the walls.

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300mm x 300mm

#REF! size (inside) with standard weight.(i) Square mouth traps.(B) 150mm 14.00 1246.92 No.

x 100mm size P or R

Construction of brick masonary chamber of size 455mm * 610mm

internal dimentions and depth upto 650mm for ground inspection

#REF! chamber with brick having crushing strength not less than 10.00 2932.93 No.

35Kg/sqcm. in cement mortar 1:5 40mm thick C.I cover with frame

(light duty) comp.

Providing & fixing vitreous china flat washbasin 550mm X 400mm

size with single hole for piller tap with C.I. or M.S. brackets painted

white including cutting holes and making good the same including

brass charomium plated 15mm diameter screw down pillar tap with

back nuts and 15mm diameter PVC pipe connection with brass nuts

bottle trap, stop tap,waste couplin 40mm,fisher union, etc. complete.

Providing & fixing vitreous china long pattern white colour water

closet squatting pan(Indian type W.C.Pan) size 580mm including

earthwork, bed concrete, foot rests,G.I inlet connection for flush pipe

and trap including flush cock etc. complete.

Providing & fixing wash down water closet (European Type W.C.

#REF! pan ) with integral P or S trap including jointing the trap with soil 2.00 2265.90 No.

pipe in CM 1 :1 (1 Cement : 1 fine sand ) including seat and cover.

Providing and fixing 600mm x 450mm bevelled edge mirrror of

#REF! superior glass mounted on 6mm thick A.C. sheet or plywood sheet 8.00 859.41 No.

and fixing to wooden pluge with C.P. brass screws and washers.

Providing and fixing C.P. brass towel rail comlete with C.P. brass

#REF! brackets fixed to wooden plugs with C.P. brass scews.(B) 600mm x 8.00 616.42 No.

Construction of a soak well of size 1.50 m Diameter and 2.40 m

#REF! Deep. as per the approved drawing & design etc.in all sort of soil 8.00 6009.33 Cmt

complete as directed and approved by engineer incharge.

Construction of a septic tank of size 3.60 m X 1.15 m X 1.50 m. as

#REF! per the approved drawing & design etc.in all sort of soil complete as 4.00 5621.30 Cmt

directed and approved by engineer incharge.

Providing and fixing SS Sink Glossy ASIS 304 Grade x 1mm thick

with over all size 610 x 460 mm & bowl size 560 x 410 x 200 with

#REF! single hole for pillar tap Fixing in sandwich platform including 2.00 1556.08 No.

cutting holes and making goods the same including. necessary

fixtures, connections and waste pipes

Providing & fixing stainless steel soap tray near wash basin & hand

wash facility cte comp.

Providing & fixing Stainless steel 316 Grab Bar 40mm dia.75Cm

long rail as per given detail.

Description Of Item Quantity Rate Unit Amount

Construction of ICN Chamber as per given detail Drg. & instruction

Construction of an under ground RCC water tank of. as per the

#REF! 60000.00 6.32 Litre

approved drawing & design etc. complete.

Providing erecting and fixing double coated ISI water tank of

#REF! required capacity each with all necessary fittings and connection etc. 3000.00 3.95 Litre

complete on terrace

Providing & fixing 15mm dia screw down brass chromium plated bib

tap of approved quality etc. complete.

Providing & fixing 25mm dia chromium plated brass half turn flush

cock of approved quality including fixing in pipe line etc. complete.

Providing and fixing Gun metal check or non-return fullway wheel

valve.(C) 25mm dia.

Providing laying and jointing in true line and level 15mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with

#REF! the help of clamp at every two metre C/C or shall be concealed as 38.25 72.65 Rmt.

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 25mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with

#REF! the help of clamp at every two metre C/C or shall be concealed as 213.75 91.84 Rmt.

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 32mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with

#REF! the help of clamp at every two metre C/C or shall be concealed as 5.10 119.15 Rmt.

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 40mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with

#REF! the help of clamp at every two metre C/C or shall be concealed as 402.40 148.12 Rmt.

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 50mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with

#REF! the help of clamp at every two metre C/C or shall be concealed as 8.50 195.67 Rmt.

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all

Providing and fixing concealed center point to wall ceiling & floor

CPVC (SDR 13.5) PIPE having National Sanitation Foundation

#REF! (NSF) seal for potable water of following dia. nominal bore tube 50.00 152.82 Rmt.

fittings and clamps including making good the wall, ceiling and floor

etc. complete. [C] 25 mm.

Providing and fixing concealed center point to wall ceiling & floor

CPVC (SDR 13.5) PIPE having National Sanitation Foundation

#REF! (NSF) seal for potable water of following dia. nominal bore tube 34.00 447.72 Rmt.

fittings and clamps including making good the wall, ceiling and floor

etc. complete. [E] 40mm.

Providing & fixing to wall ceiling and floor 6.0 kg F/cm2 working

PVC pipes of the following out side dia. Special density complete

with special flange compression type fitting,wall clips etc. including

making good the wall ceiling and floor.(F) 75 mm dia

Providing & fixing to wall ceiling and floor 6.0 kg F/cm2 working

pressure PVC pipes of the following out side dia. Special density

complete with special flange compression type fitting,wall clips etc.

including making good the wall ceiling and floor.(G) 110 mm dia

Description Of Item Quantity Rate Unit Amount

Providing and laying in ground 150mm dia P.V.C. rain water pipe

with necessary fittings, connection as per detailed drawing as directed

by Engineer in charge

Providing and fixing to wall ceiling floor 10.0 Kg. F/Cm2 working

pressure polythene pipes for soil waste and ventilating pipes of the

#REF! following outside dia. low density, complete with necessary fittings 18.00 356.59 Rmt.

,wall clamps etc including making good the wall ceiling and floor.

{Finolex, Supreme, Prince or equivalent brand} (C) 150 mm

Providing & fixing UPVC check or non-return fullway

valve(C)15mm dia.

Providing & fixing UPVC check or non-return fullway

valve(B)25mm dia.

Providing & fixing UPVC check or non-return fullway

valve(A)40mm dia.

Providing water harvesting pit of 5.50 m Dia well and 2.46 mt

x2.46mt x4.00 mt size brick masonary well for water logging with

excavation in any strata upto four meter depth, filling the pit with

B.T. Metal 40 mm in 0.80 mt. depth with 25-40mm kapachi, 0.80 mt.

#REF! depth and 0.50 mt. depth with coarse sand & charcoal in layers 1.00 151502.53 JOB

including making P.V.C. line for water inlet etc. as directed with

300mm dia bore 40 mt. depth and 200mm dia UPVC CM type casing

pipe as slott 1.5 to 2.0 mm size and ordinary pipe with gravel packing

or as directed.

Providing and constructing filter chamber of size 1.50 x 1.50 x

#REF! mt. as directed including connection rainwater pipes as per detailed as 1.00 22406.84 JOB

directed by Engineer in charge including cost of labour and material.

Providing & supplying ISI mark P.V.C butterfly valves & Reflux

valves of following class and diameter including all taxes, insurance,

transportation, frieght charges, octroi, inspection charges, loading,

unloading, conveyance to departmental store.75 MM dia.

Drilling of bore hole in Alluvial Strata by direct Rotary Rig. 250mm /

Providing and laying Supply of ERW blank pipe of approved quality

#REF! at site of work confirming to IS IS: 4270/2001 (a) 200 mm dia ( Min 325.00 2431.07 Rmt.

6.00 mm thick).

Providing and laying E.R.W Plain end medium duty pipe cage

typeTrapezoidal shape ('V') wire wound low carbon, Galvanized

screen pipe confirming IS: 8110, 4 to 7 mtr. Size 200mm dia (D)

mm dia HEAVY,1) 1.00mm Slot size

Providing and supplying ISI make G.I pipe with coupling of

following class "B" including all taxes, insurance,

#REF! transportation,freigth charge,octroi,inspection 9.60 464.60 Rmt.

charge,loading,unloading,covenyance to deppt. Storess stacking

etc.completed 65mm dia. IS 1239/1990.

#REF! Supply of gravel having size 4mm to 6 mm as directed on site 235.50 1691.12 Cmt

Supplying submersible Electric motor driven Borewell submersible

pump set conforming to I.S. 8034 and motor conforms to IS-9283

working at 3 phase 400/440 volt 50 C/S A.C. supply & 2900 R.P.M.

Cat No.2.5, Discharge in LPM 135, Head in mtr Mini Motor 210.0,

Supplying & erecting approved make motor control cubical panel

[Star delta] made from 16G CRCA sheet duly epoxy powder painted

inside and outside with hinged doors and locking with suitable size of

ON - OFF isolator (AC 3 / 23 duty) main fuses. Digital volt and

current meter (in a single unit) with micro controller based control

unit and current sensing single phasing preventer electronic overload

protection, over voltage (Programmable) protection and under voltage

#REF! (Programmable) protection, prod less dry run protection programming 1.00 16053.95 No.

facility for setting of all parameter like overload current, high voltage

limit, low voltage limit, dry run limit with digital indication on seven

segment LED display for any fault like over load, high voltage, low

voltage, dry running single crimped, electronic star delta timer,

feather touch start / stop push buttons to be erected on angle iron

frame. Grouted on wall the contactors will be of L& T, Siemens

BCH make only) (d) S/D up to 15 HP

Description Of Item Quantity Rate Unit Amount

Providing and erecting PVC insulated round submersible cable as per

detailed technical specifications of R/C of GWSSB conforming to IS

Charges of electrologging test of bore hole.Uptron make

Providing and Fixing Acrylic Name Plate as per direction of Engineer

#REF! in charge of Size having 12" X 4" inch etc. compl. 15.00 484.80 Smt.

Distempeing (Two coats) with oil bound washable distemper having

VOC content les than 50 grm/liter of approved brand and

manufacture and of required shade on wall surfaces to give an even

shade, over and including a priming coat and putty with alkali

resistance primer of approved brand after thoroughly brushing the

surface and other foreign matter and also including preparing the

surface even and sand parpered smooth As per Approval of Engineer

Wall painting two coats with weather proof 100% acralic emulsion

APEX type paint of approved brand & manufacture and of required

shade on exterior wall surface to give an even shade over and

including a primery coat with alkaly resistance primer of approved

brand after throughly brushing surface to remove all dirt and remains

of loose powdered materials etc comp for all height.

Painting two coates(Excluding Priming coat) over new steel and other

metal surfaces with enamel paint, brushing, interior to give an even

shade including cleaning the surface of all dirt, dust and other foreign

matter etc. complete.

Painting of SSA logo (1.5m X1.0m)on front side wall as directed by

Engineer in charge and as per approved drawing.

Providing and fixing 1.20 Metre high fencing with 2.0 Metre long

M.S. Angle posts 40mm x 40 mm x6 mm and oil painting 3 coats

fixed at 2.5 Mt,C/c. with five Horizontan lines and two diagonals of

#REF! galvanised steel barbed wire weighting 9.38 Kg. per 100 Metre, 400.00 391.93 Rmt.

strained and fixed to posts with G.I,staples including fixing the

postsin ground with 0.5 M x 0.5.M x 0.5 M. block in C.C1:5:10 etc

Box cutting the road surface to proper slope and camber for making a

#REF! base for road work including removing the excavated stuff and 189.00 112.02 Cmt

depositing on the road side slope as directed upto 50Mt.lead.

Suppliying of graded stone aggregate of following sizes (for W.B.M.

Road)(2) Hand broken stone aggregate 40 mm to 63 mm size.

Suppliying of graded stone aggregate of following sizes (for W.B.M.

Road)(1) Hand broken stone aggregate 25mm to 90mm size.

#REF! (i) Supplying of murrum / binding materials 47.25 148.53 Cmt

Spreading the stone aggregate for rolling and W.B.M. including

#REF! filling the interstices to required camber and gradient (excluding 90.00 268.49 Cmt

spreading of Blindage)(ii) 40mm to 63mm size aggreagates (H.B.)

Spreading the stone aggregate for rolling and W.B.M. including

#REF! filling the interstices to required camber and gradient (excluding 67.50 268.49 Cmt

spreading of Blindage)(iii) 25mm to 50mm size crushed stone

Spreading blindage or road crust filling the gaps in metal and leveling

to camber and gradient as directed.(i) Murrum

Rolling and consolidation of soling including filling in depression

which occur during the process, with power roler 8 tonne to 12 tonne.

De-watering of tremix M200 floor concrete by means of vaccum

#REF! dewatering using floater machine and other necessary equipments and 450.00 57.13 Smt.

cmplete the work (ROAD)

Grassing with ‘Doob’ grass including watering and maintenance of

the lawn for 35 days or more till the grass forms a thick lawn free

#REF! from weeds and fit for mowing including supplying good earth if 100.00 353.97 Smt.

needed (the good earth shall be paid for separately). Carpet grass of

approved quality

Description Of Item Quantity Rate Unit Amount

Planting of 5 feet trees as suggested by EIC (Avenue trees) in 0.60 m

dia holes, 1 m deep dug in the ground, mixing the soil with decayed

farm yard/sludge manure, planting the saplings, backfilling the

trench, watering, fixing the tree guard and maintaining the plants for

one year as per additional technical specification . (Native tree

NETLON Mosquito Net Providing & fixing Provding, making and

fixing the Netlon mosquito net on window with solid wooden frame

and velcro fabric with stiching, etc. complete as per reference image,

drawing, specifications and as directed by the Engineer - in - Charge

including all necessary material, labour, wastage, necessary tools,

tackles, consumable hardware & required SS hardwares (if

necessary), adhessives, for all floors, all heights, all levels and all

places within the campus. The rate shall be inclusive of all necessary

loading - unloading, packing with protection, transportation, all

applicable taxes etc. complete to the satsfaction of EIC.

Providing & Fixing cotton fabric curtain of approved quality along

#REF! with required nos of rings & 25 mm dia dia ss rod with necessary 445.64 1630.12 Smt.

stitching etc complete.

Providing & Fixing Green board(2400mm x 1200mm) with soft

#REF! board(1200mm x 1200mm) on wall as per the drawing & design etc. 2.00 10352.50 No.

Supplying & erecting D.C.P. type fire extinguisher for following

capacity cartridge type with gun metal cap 150 gram CO2 gas

cartridge, powder and brackets confirming to IS 2171 1985 and

complete erected with necessary clamps made from 50 x 6 mm M S

Flat with nuts and bolts grouted in wall complete.[A] For 5 Kg

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of

following capacity with necessary clamps made from 50 x 6 mm M.S.

Flat with nut & bolts grouted in wall complete.[A] For 4.5 Kg

Providing & erecting water cooler having storage capacity 150 Ltr. &

cooling capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The

outlet temp. of the water should drop by 15˚C within a hour, The

water cooler should be comprising of hermetically sealed compressor,

fan motor, condensing unit, water tank surrounded by evaporating,

coil, thermostats, relay etc.complete with necessary inlet & outlet

connection. The body of water cooler will be made from Stainless

Supplying & erecting 5 stage single reverse osmosis water

purification system with M.S. powder coated frame, prefilter housing

with 'O' ring presediment filter GAC filter, carbon filter suitable

#REF! buster DC pump capacity 80 psi, mention with 40 psi inline type post 4.00 29187.99 Ea.

carbon filter auto low & high pressure switches with following size of

storage tank & LPH capacity & erected as directed [C] 50 Ltr / Hr

with 150 psi 2 nos booster pump

Providing & Erecting Netwrok rack with following capacity with

#REF! Necessary cooling fan,Cable manager,6A PDU,equipment rack with 1.00 13771.35 Ea.

necessary mounting accessories.(A) 9 U

Provding and erecting 100kva oil Cooled Servo Voltage Stabilizer

Motorized Control, Input range: 320vac to 480vac output:

400vac/415vac +-1% , with 4 pole Change over switche , Shunt

release coil and Mccb 160A 3 pole , Microprocessors based Control

card with sensing Transformer , first fillings of oil included around

Description Of Item Quantity Rate Unit Amount

Supply of approved make FRP Pole having following specifications:

FRP Light Pole made by CNC filament winding machine using

thermoset resin polyester/epoxy resin system) having minimum 62%

glass content. The pole should be in one piece and tapered round in

shape, having smooth finish and should be totally free from corrosion

as well as non conductive & shock proof Pole should be provided

with FRP Anchor Base and it should be heavy duty, or MS Material

duly painted with Epoxy paint.Pole should be flame retardant as per

IS 6746. Resin used shall be UV resistance and pigmented. A highly

weather resistant polyurethane coating shall be applied to the pole

after applying suitable primer system that ensures proper adhesion of

the paint. Minimum coating thickness shall be 80 to 100 micron.

Deflection of the pole shall not exceed more than 10% of the length

of pole for the given load“ Pole should be generally made as per the

dimensional data, performance criteria and some interchangeability

features of poles as per standard ANSI C 136.20 latest version or

ASTM D 4923/01 including cable termination box with necessary

accessories . The size of pole and type of installation with foundation

as per manufacturer details and site requirement are as below .(1)

Suitable for base plate mounting single arm Bracket.[H] Overall

length of 6 Mtr. Average Thickness: 7.5mm

Top/ Bottom OD Dia A/F 89mm ± 2mm approx. approx. Weight of

Pole 32 kg approx. (Without Base) Anchor Base (Size 300X300 &

Providing and erecting Street Light pole bracket comprising main B

Class MS pipe of 4.2 cm/require outside dia. complete with suitable

B Class M.S. sleeve tubing of approx. 45cms.length and suitable for

76.5 mm /80mm / required size of pole top having sufficient fasteners

#REF! for fixing the brackets and having spread of 1.5.mtr. length with 110 17.00 626.20 Ea.

deg.with vertical plane & suitable welded stays, reducer and with

check nuts complete painted with one coat of Red oxide / PU base

primer and two coats of Aluminium / PU paint. paint with following

nos of arms.[A] Single Arm Bracket 1.5 Mtr

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 3 Watt and above assembled on

single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power Factor more

#REF! than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio 17.00 3345.12 Ea.

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency

> 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE:

Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)(A) Street Light (IP-65), Surge protection -

4KV integral and ,Light must have 440VAC line supply with over-

voltage protection.(i) above 36 to 48 wattsCat-lll

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of following size

of cables (D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core)

SUPLYING, INSTALING, TESTING AND COMMISSIONING

premises of pipes and as per spec G.I. Pipe fittings such as Bends,

Tees, reducers, rubber insertions asnd galvanised nuts and bolts

includding Flow Directions Marketing, One coat of Primer, one coat

of Signal Red color 100 MM

SUPLYING, INSTALING, TESTING AND COMMISSIONING

premises of pipes and as per spec G.I. Pipe fittings such as Bends,

Tees, reducers, rubber insertions asnd galvanised nuts and bolts

includding Flow Directions Marketing, One coat of Primer, one coat

of Signal Red color 80 MM

Description Of Item Quantity Rate Unit Amount

SUPLYING, INSTALING, TESTING AND COMMISSIONING

Of your premises of pipes and as per spec G.I. Pipe fittings such as

Bends, Tees, reducers, rubber insertions asnd galvanised nuts and

bolts includding Flow Directions Marketing, One coat of Primer, one

coat of Signal Red color 60 MM (M.R.)(EXTRA ITEM)

SUPLYING, INSTALING, TESTING AND COMMISSIONING

Of your premises of pipes and as per spec G.I. Pipe fittings such as

Bends, Tees, reducers, rubber insertions asnd galvanised nuts and

bolts includding Flow Directions Marketing, One coat of Primer, one

coat of Signal Red color 50 MM (M.R.)(EXTRA ITEM)

SUPLYING, INSTALING, TESTING AND COMMISSIONING

Of your premises of pipes and as per spec G.I. Pipe fittings such as

Bends, Tees, reducers, rubber insertions asnd galvanised nuts and

bolts includding Flow Directions Marketing, One coat of Primer, one

coat of Signal Red color 40 MM (M.R.)(EXTRA ITEM)

SUPLYING, INSTALING, TESTING AND COMMISSIONING

Of your premises of pipes and as per spec G.I. Pipe fittings such as

Bends, Tees, reducers, rubber insertions asnd galvanised nuts and

bolts includding Flow Directions Marketing, One coat of Primer, one

coat of Signal Red color 32 MM (M.R.)(EXTRA ITEM)

SUPLYING, INSTALING, TESTING AND COMMISSIONING

Of your premises of pipes and as per spec G.I. Pipe fittings such as

Bends, Tees, reducers, rubber insertions asnd galvanised nuts and

bolts includding Flow Directions Marketing, One coat of Primer, one

coat of Signal Red color 25 MM (M.R.)(EXTRA ITEM))

PROVIDING & FIXING OF FIRE SMOKE DETECTOR ISI

#REF! MARKED ALL REQUIRED FITTING 30.00 1045.35 No.

ACCESSORIES.(M.R.)(EXTRA ITEM)

Providing and fixing 150 diameter CI sluice/butter fly valve ISI

marked with gun metal / SS working parts with stainless steel;

spindle with necessary jointing materials filling etc complete as

Providing and fixing 150mm diameter non return valve with

gunmetal working parts as per IS including.

Providing and fixing 100 diameter CI sluice/butter fly valve ISI

marked with gun metal / SS working parts with stainless steel;

spindle with necessary jointing materials filling etc complete as

Providing and fixing 100mm diameter non return valve with

gunmetal working parts as per IS including.

Providing and fixing 80 diameter CI sluice/butter fly valve ISI

marked with gun metal / SS working parts with stainless steel;

spindle with necessary jointing materials filling etc complete as

Providing and fixing 63mm Gun metal / SS single outlet type hydrant

valve as per IS 5290 with ISI marked 75 mm inlet and 63mm female

instantaneous coupling rubber washer and cast iron hand wheel

operation with close and open direction as directed.

Providing and fixing 63mm dia Gun metal /SS branch pipe of

#REF! standard length with 20mm bore hexagonal nozzle as per IS 903 with 1.00 2322.77 No.

ISI marked as directed.

Providing and fixing 63mm Parole fire hose of approved grand

conforming to IS 636 type B having crushing pressure of

#REF! kg/cm 2 of ISI marked of 15 mtr length fitting with necessary S.S 1.00 8798.36 No.

63mm delivery hose coupling as IS 903 with ISI mark bided with GI

wire etc complete directed.

Mild steel box hose cabinet of 18SWG of suitable size with looking

arrangement and 3mm thick glass panel to accommodate 1 Nos of

hose pipe (15mtr) and 1 No. GM / SS branch pipe etc painting red

colors etc as directed.

Description Of Item Quantity Rate Unit Amount

Providing and fixing first aid hose reel wall mounting fix type having

side of the hose reel made of MS providing with 30mtr long thousand

six length 25mm dia PVC nylon braided flexible hose with S.S shut

off nozzle of approved quality etc complete as directed.

Providing and erecting connection of siemens connection with

#REF! necessary fitting at our required place of the fire hydrant system as 1.00 15250.50 No.

Supplying installing, Testing & commissioning of SMB pump

capacity 97M3/HR. at 70 mtr. Head with 40 HP

Supplying installation, Testing & Commissioning of control panel for

above pump with Flanges nuts bolts gaskets etc.

#REF! Wrapping and coating of 150 mm / 100mm MS pipe 35.00 516.17 Rmt.

Supplying installation, Testing & Commissioning of On/Off switch

for all Hydrant Post.

Design, supply & installation of safety signage made of zinc base

glow in the dark rigid sheet with high luminous with pasted on 3 mm

#REF! 3.00 4.11 Sqcm

thick on rigid PVC foam sheet. Such as EXIT EMERGENCY EXIT.

Do not use lift etc.

#REF! 3C x 2.5 sqmm cable with PVC pipe wiring 30.00 37.54 Rmt.

Supplying of Armored Aluminum cable PVC Insulated Approved

mark 3.5C x 50 sq mm cable.

#REF! Pressure switch for Entire System 1.00 6452.13 No.

#REF! Pressure gauge for Entire System with fitting 1.00 1706.88 No.

#REF! 25 mm S.S Boll valve for Entire System with nipple fitting material 3.00 973.69 No.

#REF! Supply installing Testing & Commissioning of Spikler Set 4.00 668.68 No.

Providing and Fixing SITC of Four Way Fire Bridage Inlet Valve etc.

#REF! Providing and Fixing SITC 150mm Air Release Valve etc. complete 1.00 3108.76 No.

Providing and Fixing SITC of Jockey Pump 15 HP with all fittings

#REF! Supplying installation, Testing & Commissioning of Fir Hooter. 3.00 2323.00 No.

Supplying installation, Testing & Commissioning of Fir manual

call point with necessary fittings.

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.(j) in existing pipe erected concealed in

wall/ceiling complete,Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth

continuity of following type erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as directed.(j) in existing

pipe erected concealed in wall/ceiling complete,Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch & 5 pin Plug erected on

#REF! PVC / Metallic/Wooden box covered with appropriate front plate 50.00 425.21 Pt.

modules erected on / in wall / ceiling as per pipe erected with

following type of accessories.[I] For 6A Plug and 6 a switch with 2-

1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board(j) in

existing pipe erected concealed in wall/ceiling complete,Cat. III

Description Of Item Quantity Rate Unit Amount

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch & 5 pin Plug erected on

#REF! PVC / Metallic/Wooden box covered with appropriate front plate 24.00 567.62 Pt.

modules erected on / in wall / ceiling as per pipe erected with

following type of accessories.[II] For 16A Plug and 16 amp switch

with 2-2.5 sq.mm Cu. Wire from mcb db board.(j) in existing pipe

erected concealed in wall/ceiling completee,Cat. III

Point wiring for on board Looped Plug with 6A Modular type switch

& 5 pin socket erected on PVC / Metallic/Wooden box, single

#REF! mounting base frame covered with textured / metallic/white front 100.00 257.55 Pt.

plate modules erected on / in wall / ceiling with following type

accessoriesCat. III

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm

& earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires erected in

below type of pipe with 6A Modular type switches and following

type of accessories erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front

plate modules erected on / in wall / ceiling as per pipe erected. with

necessary batten/angle holder or ceiling rose or H.D.Connector as

directed.(j) in existing pipe erected concealed in wall/ceiling

complete Cat-III

Providing following type of Modular Type Accessories mounted with

PVC / metallic/Wooden box, single mounting base frame covered

#REF! with textured / metallic/white front plate , modules erected with 4.00 199.98 No.

necessary connections as per site situation directed by Engineer In

charge.(10) 6/16Amp. Universal socket

Providing & erecting following type of Modular Type Accessories

#REF! with necessary connection. As desired by Engineer In charge (2) 16 4.00 51.51 No.

Amp. SP one way switch

Providing following type of Modular Type Accessories mounted with

PVC / metallic/Wooden box, single mounting base frame covered

#REF! with textured / metallic/white front plate , modules erected with 160.00 25.25 No.

necessary connections as per site situation directed by Engineer In

charge.(7) Blank Plate Single,Cat.III

Providing following type of Modular Type Accessories mounted with

PVC / metallic/Wooden box, single mounting base frame covered

#REF! with textured / metallic/white front plate , modules erected with 5.00 160.59 No.

necessary connections as per site situation directed by Engineer In

charge.(8) Computer RJ-45 socket ,Cat.III

Providing and erecting ISI mark embossed Medium class RIGID

PVC PIPES (F.R.L.S.)of following size complete to be erected on/in

#REF! wall or ceiling erected with necessary PVC fittings & Junction boxes 700.00 24.24 Mtr.

fixed with adhesive solution & Clamps with following dia of pipes,

in approved manner as directed (a) 20 mm

Providing and erecting ISI mark embossed Medium class RIGID

PVC PIPES (F.R.L.S.) of following size complete to be erected on/in

#REF! wall or ceiling erected with necessary PVC fittings & Junction boxes 350.00 33.33 Mtr.

fixed with adhesive solution & Clamps with following dia of pipes,

in approved manner as directed (b) 25 mm

Providing and erecting ISI mark embossed Medium class RIGID

PVC PIPES (F.R.L.S.) of following size complete to be erected on/in

#REF! wall or ceiling erected with necessary PVC fittings & Junction boxes 100.00 54.54 Mtr.

fixed with adhesive solution & Clamps with following dia of pipes,

in approved manner as directed (c) 32 mm

Providing & erecting PVC Corrugated Flexible Conduit with

#REF! required nos. of coupling, PVC bushes, Check-nuts etc. complete of 20.00 21.21 Mtr.

following sizes.(2) 25 mm

Description Of Item Quantity Rate Unit Amount

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size,(E) in existing

pipe,(a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size,(E) in existing

pipe,(b) 2 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green colour

for earth continuity of following size,(E) in existing pipe,(a) 2 wire

providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green colour

for earth continuity of following size,(E) in existing pipe,(h) 4 wire

providing and erecting Mains with ISI marked, 1.5KV grade

electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC - 227 erected in

#REF! existing pipe of following size (Specifically for control panel, relays, 30.00 37.37 Mtr.

power switchgears, motor starters & control wiring) with required

size of copper lugs, nuts and bolts if required.(d) One wire 4.00 sq.

providing and erecting Mains with ISI marked, 1.5KV grade

electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC - 227 erected in

#REF! existing pipe of following size (Specifically for control panel, relays, 20.00 91.91 Mtr.

power switchgears, motor starters & control wiring) with required

size of copper lugs, nuts and bolts if required.(f) One wire 10.00 sq.

providing and erecting Mains with ISI marked, 1.5KV grade

electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC - 227 erected in

#REF! existing pipe of following size (Specifically for control panel, relays, 10.00 142.41 Mtr.

power switchgears, motor starters & control wiring) with required

size of copper lugs, nuts and bolts if required.(g) One wire 16.00 sq.

providing and erecting Mains with ISI marked, 1.5KV grade

electrolyte multi stranded, annealed copper conductor with heat

resistant PVC insulated conforms to IS 694, IEC - 227 erected in

#REF! existing pipe of following size (Specifically for control panel, relays, 5.00 236.34 Mtr.

power switchgears, motor starters & control wiring) with required

size of copper lugs, nuts and bolts if required.(h) One wire 25.00 sq.

Supplying and erecting Flexible PVC insulated multi strand multi

#REF! core 1.1 kv grade ISI marked copper wires of following size to be 120.00 46.46 Mtr.

erected as directed.(e) 1.50 Sq.mm 3 core round PVC sheathed

Supplying and erecting Flexible PVC insulated multi strand multi

#REF! core 1.1 kv grade ISI marked copper wires of following size to be 300.00 22.22 Mtr.

erected as directed.(c) 1.00 Sq.mm 2 core round/ flat PVC sheathed

Supplying & erecting approved make LAN cable of following size in

existing pipe as per direction,[C] CAT -

Providing & erecting Switch board for Computer or electric

apparatus consisting of following modular type accessories mounted

with PVC / Metallic concealed/open box with single mounting base

frame covered with textured/metallic /white front plate,modules

erected with necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug ,For Modular Type Accessories ,Cat. III

Description Of Item Quantity Rate Unit Amount

#REF! Decorative call bell Ting-tong box type 250 volts complete erected 1.00 71.71 No.

Providing and erecting decorative wall bracket fittings complete with

LED lamp and rust free fittings components mounted in chrome

#REF! finish housing with holder ,clear/opaque glass diffuser complete 8.00 1712.96 No.

erected with lead wires with minimum 15 wattage capacity as per

instruction engineer incharge/architect/authority .cat-III

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of co-extruded polycarbonate

channel with diffuser part in needed opal finish with company

mark/name 160V to 270V, Power Factor more than 0.9, THD < 15%,

CCT 3000 K to 6500K,

#REF! Luminaire efficacy> 85 lumens/watt ,LED 101.00 373.70 No.

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.),(A) Tube Light with integral driver,(ii)

22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet,Cat-lll

Supplying and erecting led lamps with following wattage capacity of

220 to 240 voltage, minimum 15000 burning hours life, 500 V in

built-surge protection,Polycarbonate diffuser, mounting suitable for

E14 / E27 / B22 lamp holders, pf >= 0.5(A) LED Lamps integral

type, with PC diffuser suitable LAMP holder,(ii) 8 watts ,Cat-III

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to

IS: 513/CRCA/aluminium pressure die cast powder coated and high

U.V. & corrosion resistance with diffuser housed in aluminium

casted body with company mark/name

160V to 270V,Power Factor more than 0.9, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)(A) Square/ Circular shaped

Surface/Recessed Mount Downlight with provision for spring loaded

mounting clips complete.IP20,(ii) 15 watts, Surge-2 KV,Cat-lll

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 3 Watt and above assembled on

single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power Factor more

#REF! than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio 19.00 4997.48 No.

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency

> 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE:

Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)(A) Street Light (IP-65), Surge protection -

4KV integral and ,Light must have 440VAC line supply with over-

voltage protection.,(ii) 60 Watts,Cat-lll

Description Of Item Quantity Rate Unit Amount

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 3 Watt and above assembled on

single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power Factor more

than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

#REF! >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency 6.00 4819.72 No.

> 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE:

Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.) (C) Post Top Lantern LED fitting

comprises of finish cast aluminum spigot and spun aluminum canopy

fixed with opal polycarbonate, pipe arrangement for vertical

mounting driver and accessories wired upto terminal block.IP

Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 25 KA. at

V,having normal current rating up to 25 A to 100A. with Fixed

#REF! thermal & magnetic release suitable to work on A.C. supply 50 c/s. 1.00 6177.16 No.

with all internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing. ICS=100% of ICU only

Providing and erecting Approved make Earth fault Relay suitable to

mount with inter connection suitable to following size of moulded

case circuit breaker having CT ratio & MCCB rating as following

along with shunt trip 220V AC. with all internal connections &

complete erected in existing M.S.housing..(1) 15 A -100 A , CT

Supplying and erecting triple pole & neutral 440V / 500V panel

mounting Copper Busbars with four equal Nos. of electrolyte bus

having current density not more than 1.6 Amp. / sq.mm (Rated

current / cross section area) duly wrapped with colour insulating tape

for phase sequence of following current carrying capacity, erected

with necessary bus bar supports /insulators, main cable socket to each

bar, erected in existing cubical panel with necessary connections. (A)

Suitable for 100 Amp. capacity

providing and erecting Miniature circuit breaker single pole 6A to

25A suitable to operate on 240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark , Cat.III

Providing & erecting 240 V MCB double pole switch for lighting

#REF! Load (B Curve) having 10 KA breaking capacity & confirms to IS : 4.00 278.76 No.

8828 in existing box having following capacity (A) 6 to 32 Amp.

Providing & erecting 240 V MCB double pole switch for motor &

inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity ,(A)

6 to 32 Amp. Cat.III

Providing & erecting 415V MCB Four Pole Switch for Lighting

Load (B curve) having 10KA breaking capacity & confirms to IS

:8828 in existing box having following capacity. (a) 6 to 32 Amp.

Sheets steel powder coated enclosure suitable for incorporating

One/Two nos. MCB.

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

#REF! without MCB to house appropriate nos. of MCBs.(The DBs should 8.00 2913.85 No.

be used of same company of MCB to be used) suitable for (B) three

phase incoming and single phase horizontal type outgoing Per phase

isolation type (PPI) (b) sheet steel double door,(ii)6 way

Description Of Item Quantity Rate Unit Amount

Providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on 3 phase and neutral

415V,50Hz. having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic component for

following Max. rating erected as directed.,(ii) 40Amps. FP , Cat. III

Providing & erecting Medium Voltage Danger Notice Board sticker

#REF! as per language suggested by engineer incharge of standard size as 9.00 26.26 No.

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron

galvanising, connection terminal dia of 14 mm with constant ohmic

#REF! value surrounded by highly conductive compound with high charge 1.00 5842.85 No.

dissipation suitable for following type of applications with chamber

and heavy duty cover.(approved make OEM has to submit test

certificate including value of earth resistane of installation.(a) For

Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron

galvanising, connection terminal dia of 14 mm with constant ohmic

value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber

and heavy duty cover.(approved make OEM has to submit test

certificate including value of earth resistane of installation.[b] For

Electrical installation up to 11 KV located in other than normal

soil i.e. Soft Rock, Marshy Soil etc.

-Length of Pipe : 2 mtr

-Back filling Compound :1 no. Bag of 25 Kg

#REF! Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 2.00 794.87 Kg.

Providing and erecting Pipe type earthing having 150 cms.long and

2.5 cms. dia. galvanised iron pipe with coupling and buch buried in

specially prepared earth pit complete with necessary 8 SWG earth

#REF! For using salt and charcoal / coke as required for pipe type earthing 15.00 171.70 No.

Providing & erecting weather proof, dust & vermin proof, floor

mounted front operated indoor type cubical panel board necessary IP-

42 and above protection as per approval from engineer incharge

made from 14 SWG thick CRC M.S. sheet for outer body & doors,

16 SWG thick CRC M.S.sheet for internal partitions with necessary

accesories , supporting angles/ flats channel including cutting,

bending, drilling, welding, riveting with internal partitions & cable

alley as per requirements & instruction of engineer-in-charge with

erection of supplied switch gears, BUSBARS, suitable size of inter

connecting PVC copper wire / copper-aluminium strips, rubber

grommets, rib, bakelite control fuses/MCB for measuring

instruments, earth bus & earth bolts, foundation flange - bolts-base

Plates, sufficient nos. of hinged doors, handles with locking

arrangement and rubber gasket,heavy duty end terminal

connection,danger notice board,necessary ventilation,earthing strip

complete. The Panel shall be painted with epoxy powder coating.

(The rates excludes the cost of switchgears, bus bars, inter connecting

mains & Copper Aluminium strips, meters, Fuses etc. The dimension

shall be measured excluding base beams) The panel shall be supplied

with following approved manufacturers with following size.(B) The

standard companies switch gear shall be used and only manufacturers

at CPRI approved factory ,(i) with 350mm depth

Description Of Item Quantity Rate Unit Amount

Providing , erecting , fabricating the M.S. structure as per requirement

on site incorporating proper size of M.S. angles,square,round, flats,

bars, channels, sections complete with cutting, welding, grinding &

finishing duly painted with one coat of red oxide with erection on

site as per direction of engineer in charge with necessary grouting,

cementing, plastering & finishing complete.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of following size

of cables,(B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core)

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe of following

size of cables.(B) 4 core 6 Sq. mm

Making trench in soft soil of suitable width of 90 cm deep for laying

#REF! cable or locating the fault all over the run and back filling the same 360.00 55.55 Mtr

and making the surface as normal ground.

Making trench in Hard Murrum / Tar Road of suitable width of

cm or required depth for laying any size of cable or locating the fault

all over the run and back filling the same and making the surface as

Supplying following size of Light duty “A” Class G.I . Pipe &

erecting as directed by Engineer-in-charge. (B) 50 mm dia

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

#REF! connecting accessories of same material at required depth in existing 100.00 62.62 Mtr

trench for laying of cable. below ground / road surface for enclosing

cable (A)50 mm outer dia

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

#REF! connecting accessories of same material at required depth in existing 350.00 95.95 Mtr

trench for laying of cable. below ground / road surface for enclosing

cable (C)90 mm outer dia

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out

going tails, insulating tape etc for following size of cables.(B) 2 to

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out

going tails, insulating tape etc for following size of cables.(C) 2 to

Providing and, fixing heavy duty flange type brass double

compression type cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails, insulating tape etc for

following size of cables. (B) 3 & 1/2 core 35/50 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. (A) 6 Sq.mm.

Solder less crimping type Aluminium lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. (D) 35 Sq.mm.

Solder less crimping type Copper lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. (A) 1.5/2.5 to 6 Sq.mm

Solder less crimping type Copper lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. (B) 10 Sq.mm

Description Of Item Quantity Rate Unit Amount

Supply, Installation, Testing and Commissioning of suitable sweep,

BEE 5 Star rated, Ceiling fan with Brush Less Direct Current

(BLDC) permanent ferrite magnet Motor, class of insulation: B, Rust

free 3 nos.Aluminium blades, 2 nos. canopies, shackle kit with

earthing provision, copper winding, Power factor not < 0.9, Service

Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM,

#REF! 350 RPM,230v (tolerance as per IS : 374-2019), THD < 10%, with 80.00 2885.57 No.

remote unit for Speed Control and all remaining accessories including

safety pin, nut bolts, washers, temperature rise = 75 degree C (Max.),

suitable for 140 to 285 Voltage and rectifier circuit with surge, over

current and overload protection , 50 Hz, Single phase AC Supply,

earthing etc. Complete as required.[ Make shall be approved by

Engineer in Charge] (B) 1200 mm Sweep (48")

Supplying and erecting 19 / 20 mm. nominal bore Medium Class

#REF! M.S. Pipe down rod erected duly painted for fan complete with 48.00 108.07 Mtr.

proper insulation without leakage and earthing.

Supplying & erecting fan hook box of 10 mm M.S. round bar

bounded to the RCC bars up to 50mm length each side and pierced

through a 16 Gauge M.S. box / Heavy Duty PVC box complete

erected concealed in Ceiling with necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook

Supplying & erecting approved make low noise decorative exhaust

#REF! fan having square frame ABS body with inbuilt lowers & square 3.00 1703.87 No.

frame.200mm with 1350RPM Cat.II

Supplying and erecting approved make oscillating type bracket fan

A.C. 23OV. 50cy/s 400/450 mm sweep wall mounted with height

adjustment and rotary tilting device complete with guard, flexible

Core plug top complete erected with lead wires as directed.Cat.II

Supplying and erecting approved make Pedestal Circulatory fan A.C.

#REF! 230 V. 50 Cy/s. 600 mm sweep and adjustable height complete with 10.00 4023.84 No.

guard, & standard lead flexible wires and plug top. Cat.II

Supplying & erecting single phase approved make industrial exhaust

fan suitable for medium duty ring mounted low noise operation

suitable for medium duty having following dia size and maximum

speed in RPM,[A] 305 mm dia 900 RPM,Cat.II

#REF! Providing suitable M.S. louver shutter of the Exhaust fan. 6.00 368.65 No.

Providing window frame suitable for erection of Exhaust fan

#REF! complete covering the remaining portion of window with 15 mm. 6.00 172.71 No.

thick plywood and colour washing to match the colour of the wall.

Supply of approved make FRP Pole having following specifications:

FRP Light Pole made by CNC filament winding machine using

thermoset resin polyester/epoxy resin system) having minimum 62%

glass content. The pole should be in one piece and tapered round in

shape, having smooth finish and should be totally free from corrosion

as well as non conductive & shock proof Pole should be provided

with FRP Anchor Base and it should be heavy duty, or MS Material

duly painted with Epoxy paint.Pole should be flame retardant as per

IS 6746. Resin used shall be UV resistance and pigmented. A highly

weather resistant polyurethane coating shall be applied to the pole

after applying suitable primer system that ensures proper adhesion of

#REF! the paint. Minimum coating thickness shall be 80 to 100 micron. 15.00 10036.37 No.

Deflection of the pole shall not exceed more than 10% of the length

of pole for the given load“ Pole should be generally made as per the

dimensional data, performance criteria and some interchangeability

features of poles as per standard ANSI C 136.20 latest version or

ASTM D 4923/01 including cable termination box with necessary

accessories . The size of pole and type of installation with foundation

as per manufacturer details and site requirement are as below .(2) 'A'

Class frp/grp pole suitable for direct grouting[D] Overall Length of

6.0 meter, Average thickness : 5mm, Top/Bottom Outside Dia.

76/176mm +/‐2.Weight of Pole 19.0 Kg approx. (Burial depth

Description Of Item Quantity Rate Unit Amount

Supply of approved make FRP Pole having following specifications:

FRP Light Pole made by CNC filament winding machine using

thermoset resin polyester/epoxy resin system) having minimum 62%

glass content. The pole should be in one piece and tapered round in

shape, having smooth finish and should be totally free from corrosion

as well as non conductive & shock proof Pole should be provided

with FRP Anchor Base and it should be heavy duty, or MS Material

duly painted with Epoxy paint.Pole should be flame retardant as per

IS 6746. Resin used shall be UV resistance and pigmented. A highly

weather resistant polyurethane coating shall be applied to the pole

after applying suitable primer system that ensures proper adhesion of

the paint. Minimum coating thickness shall be 80 to 100 micron.

#REF! 4.00 8252.71 Each

Deflection of the pole shall not exceed more than 10% of the length

of pole for the given load“ Pole should be generally made as per the

dimensional data, performance criteria and some interchangeability

features of poles as per standard ANSI C 136.20 latest version or

ASTM D 4923/01 including cable termination box with necessary

accessories . The size of pole and type of installation with foundation

as per manufacturer details and site requirement are as below .(1)

Suitable for base plate mounting single arm bracket [B] Overall

length of 3 Mtr Average Thickness: 7mm.

Top/ Bottom OD Dia A/F 89/130mm ± 2mm approx. Weight of Pole:

12 kg approx. (Without Base) Anchor Base (Size 250X250 & 12mm

Providing and erecting street light pole bracket comprising main B

Class GI pipe of 4.2 cm/require outside dia. complete with suitable B

Class G.I sleeve tubing of approx. 45cms.length and suitable for

mm / 80mm. / require size pole top having sufficient fasteners for

#REF! fixing the brackets and having spread of 1 mtr. length with suitable 15.00 614.08 No.

rise as per site condition & suitable welded stiffener reducer and

nipple with check nut complete painted with one coat of Red oxide /

PU base primer and two coats of Aluminium / PU paint. paint with

following nos of arms. [A] Single Arm Bracket 1 Mtr

Supplying & erecting approved make SMC press moulded

composite FRP. loop-in, loop-out approx. 2mm thick box complete

with Bakelite connector strip 5way(3P+N+E),DIN rail for mounting

#REF! mob & hinged doors as per requirement having locking arrangements 2.00 515.10 No.

with mounting clamp with nuts, bolts & washers suitable for erection

on pole with cable clamps& earth bolt of following size of box. (B)

250mm x 200mm x 100mm [deep]

Providing 1:2:4 cement concrete foundation & 70 % PCC from

bottom including excavation for the pole of size 45 x 45 x 100 cm.

Deep in below ground level with plinth of 45 cm x 45 cm (or 45 cm

dia x 45 cm) high upper ground level with necessary curing and

finishing in approved manner.

( for 4 & 6 mtr pole)

Supplying & erecting approved make Digital time switch having

lithium cell 6 years operative and operate battery backup 1 channel

day clock with 14 memory programme, suitable to operate on 240V +

5%, 16A with, floating contacts Minimum switching setup time

minimum & LCD display. Also comprised permanent ON/OFF

switching. Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover erected as required with

necessary connection erected as directed.

Supplying & erecting Amplifier having following specification:

Power Output :250W (RMS) (300W Max.)

inputs : 6 Misc. & 2 Aux.

frequency Response :50-1500HZ I3db

Tone Controls :Cut & Boost type

LED Meter :5 LED Arrays

The amplifier suitable to operate 240V A.C.& 24volt D.C. (Battery)

with automatic changeover from AC to Battery operation, duly

protected by wrong Battery Polarity connections. [[Approved by

Competent Authority i.e. not Below the rank of Executive Engineer ]

Description Of Item Quantity Rate Unit Amount

Supplying & erecting recess wall mounting speaker with 5W rated

input power 3.3 K. Ohms / 3W impedance, 100 - 10000 Hz

#REF! frequency response with 6 inch dia. cone type 8 ohms speakers duly 10.00 591.86 No

fitted in ABS plastic cabinet of colour match with wall or ceiling of

following size. (b)Square shaped 260 x 260mm size speaker

Supplying, installing and testing approved make microphone for All

purpose, with frequency response of 100 - 11000 Hz, having

sensitivity 2.2mv / Pa & impedance 500 Ohms (LO- Z) supplied with

quick detachable holder, 6 mtr twin core cable & 3 pin XLR

connector. [[Approved by Competent Authority i.e. not Below the

rank of Executive Engineer ]

Providing and erecting water cooler having storage capacity 80Ltr. &

cooling capacity 40 Ltr.per hour @ an ambient temp of 45˚ C. The

outlet temp. of the water should drop by 15˚ C within a hour, The

water cooler should be comprising of hermetically sealed compressor,

fan motor, condensing unit, water tank surrounded by evaporating

coil, thermostats, relay etc. complete with necessary inlet & outlet

connection. The body of water cooler will be made from Stainless

Providing & erecting water cooler having storage capacity 150 Ltr. &

cooling capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The

outlet temp. of the water should drop by 15˚C within a hour, The

water cooler should be comprising of hermetically sealed compressor,

fan motor, condensing unit, water tank surrounded by evaporating,

coil, thermostats, relay etc.complete with necessary inlet & outlet

connection. The body of water cooler will be made from Stainless

Supplying & erecting 5 stage single reverse osmosis water

purification system with M.S. powder coated frame, prefilter housing

with 'O' ring presediment filter GAC filter, carbon filter suitable

#REF! buster DC pump capacity 80 psi, mention with 40 psi inline type post 2.00 15620.66 No.

carbon filter auto low & high pressure switches with following size of

storage tank & LPH capacity & erected as directed ,[B] 25 Ltr / Hr

with 30 Ltr. Storage Tank

Supplying & erecting 5 stage single reverse osmosis water

purification system with M.S. powder coated frame, prefilter housing

with 'O' ring presediment filter GAC filter, carbon filter suitable

#REF! buster DC pump capacity 80 psi, mention with 40 psi inline type post 2.00 29187.99 No.

carbon filter auto low & high pressure switches with following size of

storage tank & LPH capacity & erected as directed [C] 50 Ltr / Hr

with 150 psi 2 nos booster pump

Supplying and erecting approved make panel mounting type Digital

Ammeter having 3 digits LED display, external CT operated,

#REF! calibrated for 0 to 1000 Amps suitable to operate on 500 Volt AC , 1.00 1558.43 No.

erected on existing panel board with all connection, wiring etc .with

manufacturers calibration certificate.

Supplying and erecting approved make panel mounting type Digital

Voltmeter having 3 digits LED display, 0 to 750 AC Volts range

erected on existing panel board with all connection, wiring etc .with

manufacturers calibration certificate.

Providing & erecting L.T. Current Transformer with bar primary

#REF! 50/5 to 1000/5 ratio 15 VA burden erected in existing CRCA box 4.00 274.72 No.

duly secured with insulating materials connected to the meter

Supplying and erecting approved make suitable panel indicator LED

#REF! type lamp, lens cover, complete erected with necessary connections. 4.00 43.43 No.

Supplying and erecting Ammeter / Voltmeter selector switch for

#REF! phase AC Supply 500 V on existing panel board with necessary 1.00 317.14 No.

Description Of Item Quantity Rate Unit Amount

Supplying & erecting approved make motor control cubical panel

(Direct - on - line) made from 16 G. CRCA sheet duly epoxy powder

painted inside and outside with hinged doors and locking,

arrangement consisting of suitable size of ON- OFF isolator (AC -

3/23duty) main fuses, single phasing preventer, indicating lamps for

#REF! R- Y - B phases, overload relay, Automatic water level controller, 1.00 7722.46 No.

Ammeter, Voltmeter each with two way selector switch incoming,

wires duly socket crimped, main contactor & overload relay, start -

stop push buttons, to be erected on angle iron frame grouted on wall

as directed. The isolator, overload relay & contactors will be of L &

T, Siemens or BCH make only. (A) DOL up to 5.0 H.P.

Providing & erecting open well horizontal mono block pump set with

cast iron body, complete for three phase submersible motor

#REF! having[D] For 5 HP 3 phase open well horizontal mono block pump 2.00 18746.61 No.

set suitable for 1350 LPM to 310 LPM @ 10 to 42 Mtr head suitable

for 50/65 mm dia delivery pipe,Cat.II

Lowering of submersible motor pump set at the depth of following

,complete with required. Nos. and size of casing pipes erected by

means of proper chain pulley block & pipe wrenches after checking

#REF! of threads of each pipe with coupling to take the load of the pump set 2.00 856.48 No.

and pipe assembly filled up with water (D)For Open well Horizontal

submersible pump set for sump well(i) 1 HP to 5 HP

Providing and erecting ISI marked PVC insulated PVC Sheathed

#REF! Flat flexible Submersible copper cable approved make of following 250.00 146.45 Rmt.

Size. (c) 3 Core x 4 Sq. mm

Supplying rubber matting of following thickness as per IS:15652/IEC

#REF! 3.00 1027.17 Sq.Mtr

SITC of Vertical Air Termination Solid aluminium with Base-

mm dia and 1000 mm long. Air Termination Base tested for

conditioning, Ageing Test & Lightning impulse current withstand

test: 100 kA of 10/350µs waveform in an accredited Third party

laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol with

MAST 34mm dia 3000 mm long- Cold Galvanized

Supplying, installing, testing & commissioning of SOLAR WATER

heating system as per prevailing IS code comprising of Solar flat

locket collector, stainless steel hot water storage isolated tank with

S.S. heat exchanger, absorber made of copper sheet & copper tube of

following capacity in liter / day (LPD) with "B" size aluminium box

collector with appropriate capacity electrical backup arrangement

(Excluding inlet & outlet pipe lines) (E) Capacity of 1000 LPD

I/We am/are willing to carry out the work at………………….% above/below percent

(Should be written in figures and words) of the estimated rate mentioned above.

Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct……………………… % below Deduct……………………… % Above

In words In words