Loading…
Loading…
Tender Value
₹1.2 Cr
EMD Value
₹2.1 L
Closing Date
10 Mar 2026, 3:30 pmClosed
Up-gradation of RPF Post (Thana) & Construction of 25 bed Barrack building (20 Bed Male & 05 Bed Female) with furniture etc at Ramganjmandi.
32-2026
32-2026
Open
12 Months
Kurukshetra, Haryana
₹0
₹2.1 L
12 Feb 2026
12 Feb 2026
24 Feb 2026
Item Breakup - A-DSR 2021 ITEMS
2.3 +/- 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). 10.0 STEEL WORK 10.17 Providing and fixing M.S. fan clamp type I Each 20 185.95 3719 or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams 33 during laying, including painting the exposed portion of loop, all as per standard design complete. Steel work welded in built up sections/ framed work, including cutting, hoisting, 10.25 fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 10.25.2 In gratings, frames, guard bar, ladder, Kg 6000 142.3 853800 34 railings, brackets, gates and similar works KOTA DIVISION-ENGG/WEST CENTRAL RLY 10.28 Providing and fixing stainless steel ( Grade Kg 150 612.25 91837.5 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & 35 stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 11.0 FLOORING 11.26S KOTA STONE FLOORING Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with 11.26 pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 36 11.26.1 25 mm thick Sqm 40 1706.6 68264 11.37S CERAMIC GLAZED TILES 11.38 Providing and laying Ceramic glazed floor Sqm 30 1107.05 33211.5 tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red 37 Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. 11.41S VITRIFIED FLOOR TILES Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey 11.41A cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified floor tiles polished finish of 11.41A.2 size 38 11.41A.2.1 Size of Tile 600 x 600 mm Sqm 350 1359.2 475720 Glazed Vitrified tiles Matt/Antiskid finish of 11.41A.3 size 39 11.41A.3.1 Size of Tile 600 x 600 mm Sqm 30 1311.05 39331.5 12.0 ROOFING KOTA DIVISION-ENGG/WEST CENTRAL RLY Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry surrounded with 12 mm thick 12.40 cement mortar of the same mix, as that of masonry (lead caulking will be paid for separately): Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including 12.41 jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 40 12.41.2 110 mm diameter Metre 80 319.75 25580 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain 12.42 water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 12.42.4 Single tee without door 41 12.42.4.2 110x110x110 mm Each 16 190.75 3052 12.42.5 Bend 87.5 degrees 42 12.42.5.2 110 mm bend Each 20 132 2640 13.0 FINISHING 13.1S CEMENT PLASTER (IN FINE SAND) 15 mm cement plaster on the rough side of 13.2 single or half brick wall of mix : 43 13.2.1 1:4 (1 cement: 4 fine sand) Sqm 900 339.7 305730 CEMENT PLASTER WITH A FLOATING COAT 13.7S OF NEAT CEMENT Cement plaster 1:3 (1 cement: 3 coarse 13.9 sand) finished with a floating coat of neat cement. 44 13.9.2 20 mm cement plaster Sqm 40 507.85 20314 13.25 Extra for plastering: 13.26 Providing and applying plaster of paris Sqm 1200 214.3 257160 putty of 2 mm thickness over plastered 45 surface to prepare the surface even and smooth complete. Distempering with oil bound washable 13.41 distemper of approved brand and manufacture to give an even shade : 13.41.1 New work (two or more coats) over and Sqm 800 162.55 130040 46 including water thinnable priming coat with cement primer 13.44S EXTERIOR FINISHING Finishing walls with Acrylic Smooth exterior 13.46 paint of required shade : 13.46.1 New work (Two or more coat applied @ Sqm 600 166.85 100110 1.67 ltr/10 sqm over and including priming 47 coat of exterior primer applied @ 2.20 kg/10 sqm) Painting with synthetic enamel paint of 13.62 approved brand and manufacture of required colour to give an even shade : 13.62.1 Two or more coats on new work over an Sqm 100 191.4 19140 48 under coat of suitable shade with ordinary paint of approved brand and manufacture 15.0 DISMANTLING AND DEMOLISHING Demolishing cement concrete manually/ by mechanical means including disposal of 15.2 material within 50 metres lead as per direction of Engineer - in - charge. KOTA DIVISION-ENGG/WEST CENTRAL RLY 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c cum 5 2007.1 10035.5 49 equivalent design mix) 15.60 Disposal of building rubbish / malba / cum 30 219.35 6580.5 similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to 50 approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 16.0 ROAD WORK 16.49S MISCELLANEOUS Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting 16.91 and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 16.91.1 60mm thick cement concrete paver block Sqm 50 932.35 46617.5 51 of M-35 grade with approved colour, design & pattern. 17.0 SANITARY INSTALLATIONS Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush 17.1 pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.1.1 White Vitreous china Orissa pattern W.C. Each 7 5781.35 40469.45 52 pan of size 580x440 mm with integral type foot rests Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including 17.2 flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 17.2.1 W.C. pan with ISI marked white solid plastic Each 3 5540.55 16621.65 53 seat and lid Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, 17.7 including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.7 White Vitreous China Flat back wash basin Each 8 1318.35 10546.8 54 size 450x 300 mm with single 15mm C.P. brass pillar tap KOTA DIVISION-ENGG/WEST CENTRAL RLY Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 17.10 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 17.10.2 Kitchen sink without drain board 55 17.10.2.2 610x460 mm bowl depth 200 mm Each 3 3337.85 10013.55 17.31 Providing and fixing 600x450 mm beveled Each 6 1411.15 8466.9 edge mirror of superior glass (of approved 56 quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Providing and fixing PTMT towel rail complete with brackets fixed to wooden 17.73 cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 17.73.1 450 mm long towel rail with total length of Each 10 573.6 5736
of 88 mm, weighing not less than 170 gms 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with 18.7 clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.-Internal work - Exposed on wall 58 18.7.2 20 mm nominal dia Pipes Metre 30 325.1 9753 59 18.7.3 25 mm nominal dia Pipes Metre 35 408.55 14299.25 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of 18.8 pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the wall etc. 60 18.8.1 15 mm nominal dia Pipes Metre 30 441.15 13234.5 61 18.8.3 25 mm nominal dia Pipes Metre 40 626.05 25042 Providing and fixing G.I. pipes complete 18.12 with G.I. fittings including trenching and refilling etc.-External work 62 18.12.1 15 mm dia nominal bore Metre 30 267.5 8025 63 18.12.3 25 mm dia nominal bore Metre 40 417.95 16718 64 18.12.5 40 mm dia nominal bore Metre 80 558.35 44668 Making connection of G.I. distribution branch with G.I. main of following sizes by 18.13 providing and fixing tee, including cutting and threading the pipe etc. complete : 65 18.13.1 25 to 40 mm nominal bore Each 6 757.1 4542.6 18.15S BRASS FITTINGS Providing and fixing gun metal gate valve 18.17 with C.I. wheel of approved quality (screwed end) : KOTA DIVISION-ENGG/WEST CENTRAL RLY 66 18.17.3 40 mm nominal bore Each 4 707.3 2829.2 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe 18.46 and making long screws etc. complete (New work) : 67 18.46.3 25 mm nominal bore Each 6 369.35 2216.1 68 18.46.5 40 mm nominal bore Each 6 523.2 3139.2 18.48 Providing and placing on terrace (at all floor Litre 3000 9.7 29100 levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable 69 locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass bib cock of 18.49 approved quality conforming to IS:8931 : 70 18.49.1 15 mm nominal bore Each 24 434.2 10420.8 Providing and fixing C.P. brass stop cock 18.52 (concealed) of standard design and of approved make conforming to IS:8931. 71 18.52.1 15 mm nominal bore Each 8 594.75 4758 Providing and fixing C.P. brass angle valve 18.53 for basin mixer and geyser points of approved quality conforming to IS:8931 72 18.53.1 15mm nominal bore Each 16 500.35 8005.6 Providing and fixing PTMT grating of 18.58 approved quality and colour. 18.58.1 Circular type 18.58.1.2 125 mm nominal dia with 25 mm waste Each 12 45.25 543 73 hole 18.59S AIR VALVE & WATER METER (BULK TYPE) Providing and fixing PTMT Ball cock of approved quality, colour and make 18.62 complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 18.62.1 15 mm nominal bore, 105 mm long, Each 4 161.55 646.2 74 weighing not less than 138 gms 19.0 DRAINAGE Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water 19.4 tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar 19.6 in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 75 19.6.2 150 mm dia. R.C.C. pipe Metre 10 493.1 4931 21.0 ALUMINIUM WORK KOTA DIVISION-ENGG/WEST CENTRAL RLY Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required 21.1 EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of 21.1.2 fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.2 Powder coated aluminium (minimum Kg 380 564.8 214624 76 thickness of powder coating 50 micron) Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in 21.2 panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 21.2.2 Pre-laminated particle board with Sqm 30 951.05 28531.5 77 decorative lamination on both sides Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene 21.3 gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness Sqm 40 1019.8 40792 78 (weight not less than 10kg/sqm) 22.0 WATER PROOFING Grading roof for water proofing treatment 22.14 with 22.14.2 Cement mortar 1:3 (1 cement : 3 coarse cum 15 14275.75 214136.25 79 sand) Total 13139403.65
Item Breakup - B-NS ITEMS
A-DSR 2021 ITEMS
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TENDER DOCUMENTS
ATTACHMENT
17-ilovepdf-compressed1-
ATTACHMENT
Correction slip No 10
ATTACHMENT
Vigilamce guide lines Public Procu
ATTACHMENT
specialcivilcondition.pdf
ATTACHMENT
ApprovedBrandListTill12.11.25.pdf APPROVED BRAND LIST
ATTACHMENT
ApprovedBrandListTill12.11.25.pdf
ATTACHMENT
TENDERDOCUMENTfrom11-2025.pdf
ATTACHMENT
ANNEXURE-PCECIRCULAR2016-17-ilovepdf-compressed1-compressed.pdf
ATTACHMENT
Correctionslipno10TNo143-2025.pdf
ATTACHMENT
Vigilamceguidelines-PublicProcurement.pdf
ATTACHMENT
Download all tender documents and submit your bid