Repairing of Road from NH-31 C (Kadamguri) to Dhauliguri up to Ballimari under Dhauliguri VCDC (From Ch.0.00m to Ch.2000.00m) under SOPD for the year 2025-26, 1-Gossaigaon LAC. TN_07_02

15.2: Making up loss of material/irregularities on shoulders to the design level by adding fresh approved selected soil and compacting it with appropriate equipment at OMC upto a lead of 1000m as per techincal specification Clause 1903.

15.12: Trimming of grass and weeds from the shoulders/berms and disposing off the same to suitable locations as per technical specification Clause 1914.

15.5: Maintencance of WBM road including filling up of pot holes, ruts and rectifying corrugeted surface, damaged edges and revelling as per technical specification Clause 1906.

3.2: Scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3.0m and lead upto 1000 m as per Technical Specification Clause 301.4.

3.4: Construction of embankment with approved material obtained from borrow pits with a lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Tables 300.2 with lead up to 1000m as per Technical Specification Clause 303.1 (I) From Private Land.

4.1(A): Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with smooth wheel roller to achieve the desired density, complete as per Technical specification Clause 401. (ii) For Grading II Material.

4.7(ii): Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing rolling with smooth wheel roller 80-100kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading-II as per Technical specification Clause 405. (A) By Manual Means

5.1(i): Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502. (Provided only on WBM surface)

5.2(ii): Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg/sqm on the prepared on the prepared dry and hungry bituminous surface cleaned with hydraulic broom as per Technical Specification Clause 503.

5.3(i) : Bituminous Concrete: Providing and laying bituminous concrete with 100-120 TPH batch hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder 5.4 to 5.6 % of mix and filler transporting the hot mix to work site, laying with hydrostatic paver finisher with sensor control to the reqd. grade, level and alignment, rolling with smooth wheeled, vibratory and tendem rollers to achieve the desired compaction as per MoSRT&H cl. No.509. complete in all respect. (including carriage of mixed materials up to 10.0 Km initial lead from mixing plant) (Including cost of testing of materials at site and laboratory as directed by the deptt.)