Fabrication of pipe spools and supports at FCRI, Palakkad.

Amount

Line rectification works of main blower outlet: Scope of work includes cutting of the WNRF flange of Tee Section & re-orienting it to suit the blower outlet. Entire works shall be done as per special conditions of contract, general conditions of contract and as per instructions of engineer-in-charge.

Welding of ISMC 150 x 75 channels to A frame support as shown in the drawing no: FCRI/50/NG/22/004 Total no.of supports - 40 Nos. Approximate weld length - 32 m. No.of weld layers(Passes) - 2 Nos. Entire works shall be done as per special conditions of contract, general conditions of contract and as per instructions of engineer-in-charge.

Welding of the base of the A frame supports to the grouted rails in the lab. Total no.of supports - 12 Nos. Weld length of each support - 300mm (approximately) Total weld length - 4 m (approximately) No.of weld layers(Passes)- 2 Nos. Entire works shall be done special conditions of contract, general conditions of contract and as per instruction of engineer-in-charge.

Fabrication of 12" spool (L= 2000mm) as per the drawing No: FCRI/50/NG/22/005. Entire works shall be as done as per special conditions of contract, general conditions of contract and as per instruction of engineer-in-charge.

Fabrication of 6" upstream(1 No.) and 6" downstream(1 No.) spools of reference USFM meter lines with flow conditioner. Entire works shall be done as per special conditions of conract, general conditions of contract and as per instructions of engineer-in-charge.

Installation of 12" Bellows. Entire works shall be done as per special conditions of contract, general conditions of contract and as per instructions of engineer-in-charge.

Fabrication of inverted C frame supports for 300mm pipelines & welding the legs of the frame to the base, grouted to the floor. No.of weld layers(passes) - 2 Nos. Entire works shall be done as per special conditions of contract, general conditions of contract and as per instructions of engineer-in-charge

Fabrication & erection of 8" sch 40 pipe spool with ANSI 300# WNRF Flanges welded to the pipe ends. Length of pipe spool - 420mm (Drg no: FCRI/50/NG/22/013) Entire works shall be done as per special conditions of contract, general conditions of contract and as per instructions of engineer-in-charge.

Fabrication & erection of 8" sch 40 pipe spool with ANSI 300# WNRF Flanges welded to the pipe ends. Length of the pipe spool - 630 mm (Drg No: FCRI/50/NG/22/013) Entire works shall be done as per special conditions of contract, general conditions of contract and as per instructions of engineer-in-charge.

Fabrication of 8" sch 40 pipe spool with ANSI 300# WNRF Flanges welded to the pipe ends. Pipe spool to join with the inlet of blower, length to suite the site. (Drg No: FCRI/50/NG/22/013) Entire works shall be done as per special conditions of contract, general conditions of contract and as per instruction of engineer-in-charge.

Fabrication of Tee supports for 12" Bellows. No.of weld layers(passes)- 2 Nos Entire works shall be done as per special conditions of contract, general conditions of contract and as per instructions of engineer-in-charge.

Fabrication of 300mm ball valve stool support. No.of weld layers(passes) -2 Nos (Drg No: FCRI/50/NG/22/010) Entire works shall be done as per special conditions of contract, general conditions of contract & as per instructions of engineer-in-charge.

Fabrication of 200mm ball valve stool support No.of weld layers (passes)- 2 Nos (Drg no: FCRI/50/NG/22/010) Entire works shall be done as per special conditions of contract, general conditions of contract and as per instructions of engineer-in-charge.

Interconnecting the manifold supports of manifold 9 & 10 by channels & I Beams (ID.No N71, ID No. N76) No.of weld layers(passes) - 2 Nos Entire works shall be done as per special conditions of contract, general conditions of contract and as per instructions of engineer-in-charge.

Providing gussets for manifold supports. (Drg No: FCRI/50/NG/22/011) Entire works shall be done as per special conditions of contract, general conditions of contract and as per instruction of engineer-in-charge.

Hydrotesting of fabricated pipe spools and natural gas testing facility in FCRI, Palakkad at a pressure of 65 bar. Entire accessories required for the hydrotesting of pipe spools & Natural gas testing facility shall be in scope of contractor. Entire works shall be done as per special conditions of contract, general conditions of contract and as per instructions of engineer-in-charge.

MBM ENGG WORKS