Electrical and LAN Wiring of Ground Floor to 3rd Floor at Barasat Administrative Building Under Barasat Division, North 24 Parganas, WBSEDCL

Amount

Supply and fixing double door Vertical TPN MCB Distribution Board for MCCB incomer with IP-42 / 43 protection, on angle iron frame on wall & mending good damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 8 way up to 160A(Legrand: 607914)/( Seimens:8GB31573RC)[PWD SOR Page-D-11, Sl - 15]

Supply and fixing double door Horizontal TPN MCB Distribution Board with IP-42 / 43 protection,concealed in wall after cutting the wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 6 way (Legrand: 607716) / ( Seimens:8GB32202RC06)[PWD SOR Page-D-10, Sl.- 14]

Supply and fixing double door SPN MCB Distribution Board with IP-42 / 43 protection,concealed in wall after cutting the wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 2+16 way (Legrand: 607713) / ( Havells:DHDPSNODRW16) [PWD SOR Page-D-9]

Supply and fixing MCB SS encloser with IP-20 / 30 protection,powder coated provision for two / four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting connection & provision for earthing attachment. 2 way [PWD SOR Page-D-9, SL. 11]

Supply and fixing MCB SS encloser with IP-20 / 30 protection,powder coated provision for two / four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting connection & provision for earthing attachment. 4 way [PWD SOR Page-D-9, SL. 11]

Supply and fixing Changover switch with sheet steel enclosure on flat iron frame on wall with nuts bolts etc. 32 A (Standard / Havells) [PWD SOR Page-D-1, Sl -2(a)]

Supply and fixing 240/415 V MCB of Braking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. 6 - 32 A SP MCB(Legrand / Havells) [PWD SOR Page-D-6]

Supply and fixing 240/415 V MCB of Braking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. 40 A DP MCB(Legrand / Havells) [PWD SOR Page-D-6]

Laying of one no cable above 35 sq mm and up to 185 sq mm in under ground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos bricks per Mtr. Including filling the space between the bricks and cable and also the trench with shifted soil, leveling up and restoring surface duly rammed. (cable supplied by WBSEDCL)[PWD SOR page-F-2, Item- 1 (b)]

Supply and fixing Compression type gland complete with brass gland, brass ring & rubber rings for dust & moisture - proof entry of XLPE / PVC armoured cables as below: i) 3.5 core x 120 sq mm. [PWD SOR Page - F-4, Sl - 7 (d)]

Supply and Drawing 1.1 KV single core stranded "FR" PVC insulated & unsheathed single core standered copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid fish wire and making necy. connection as required: a)2x126/0.4 (16sqmm) + 1x80/0.4 (10 sqmm) as ECC . [PWD SOR Psge-E-9, Sl. -1]

Distribution wiring in 1.1 KV single core stranded "FR" PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20 mm size PVC rigid conduit 'FR" (Precision make) incl. necy. fittings as required: a)2x84/0.3 (6sqmm) + 1x56/0.3 (4 sqmm) as ECC . [PWD SOR Psge-E-14, Sl. -1]

Distribution wiring in 1.1 KV single core stranded "FR" PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25 mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc. a)2x56/0.3 (4sqmm) + 1x36/0.3 (2.5 sqmm) as ECC . [PWD SOR Psge-E-11, Sl. -1 e]

Distribution wiring in 1.1 KV single core stranded "FR" PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25 mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc. a)2x36/0.3 (2.5sqmm) + 1x22/0.3 (1.5 sqmm) as ECC . [PWD SOR Psge-E-11, Sl. -1 c]

Distribution wiring in 1.1 KV single core stranded "FR" PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25 mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc. a)2x22/0.3 (1.5sqmm) + 1x22/0.3 (1.5 sqmm) as ECC . [PWD SOR Psge-E-11, Sl. -1 b]

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sq mm ) single core standed 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing - capping (precision make) with 1x22/0.3 (1.5 sq mm ) single core standred 'FR' PVC insulated & unsheathed copper wire for ECC incl. necy. PVC clips, fitting etc. to light/fan/call bell point with piano key type switch (Ancore make) fixed on sheet steel fabricated switch board with perspex/bacalite top cover on wall incl. necy. connection and making earthing attachment and mending good damages to building work.[ PVC casing capping and switchbord both on surface] [PWD SOR Page E11, Sl-2]

a) Average run 5 mtr

b) Average run 6 mtr

c) Average run 8 mtr

d) Average run 10 mtr

e) On Board

Supply and Fixing 40 V 6 A 3 pin Modular type plug socket (Brand appruved by EIC) with 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connection with PVC Cu wire and earth continuity wire etc. (PWD SOR Page-E-18, Sl.- 9(a)]

Supply & fixing G.I. Modular switch Board of the following sizes complete with three no suitable size copper bar with holes (for Ph,N & E) fixed on bakalite / Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutteng the brick wall incl. making earthing attachment, painting and mending good damages to building work. [PWD SOR Page-E-17, Sl. - 1]

a) 4 Module

b) 6 Module

c) 8 Module

d) 12 Module

e)2 Row 12 Module

f)2 Row 18 Module

Supply & fixing 240 V 6 A Modular type switch (Brand approved by EIC) on existing Modular type switch board having top cover plate and making necessary connection as required. [PWD SOR Page-E17, Sl.- 3]

Supply & fixing 240 V 6 A 5 pin Modular type plug socket (Brand approved by EIC), without switch & plug top, on existing Modular type switch board having top cover plate and making necessary connection with PVC Cu wire and earth continuity wire etc.[PWD SOR Page-E17, Sl.- 4]

Supply and Fixing240 V , 4 no.,6 A, 3 pin Modular type Plug socket , with 4 no 6 A Modular type switch (Brand appruved by EIC) 16A Modular switch type MCB (C-Curve)and indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connection with PVC Cu wire and earth continuity wire etc. (PWD SOR Page-E-18, Sl.- 12] (For computer)

Supply and Fixing240 V 16 A 3 pin Modular type plug socket (Brand appruved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connection with PVC Cu wire and earth continuity wire etc. (PWD SOR Page-E-18, Sl.- 9(b)]

Supply and Fixing240 V 25 A Modular type starter (Brand appruved by EIC) with 25A Modular switch type DP MCB (C-Curve)and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connection with PVC Cu wire and earth continuity wire etc. (PWD SOR Page-E-19, Sl.- 17]

Supply and Fixing240 V 25 A Modular type socket , 25 A Modular type starter (Brand appruved by EIC) with 25A Modular switch type DP MCB (C-Curve)and 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connection with PVC Cu wire and earth continuity wire etc. (For AC point)(PWD SOR Page-E-19, Sl.- 18]

Fixing only ceiling Fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sq mm flexible copper wire. [PWD SOR Page-C-3, Sl.- 21(a)]

Extra for supplying additional wire for down rod & painting the rod exceeding 30 cm by 2x1.5 sq mm flexible copper wire. [PWD SOR Page-C-3, Sl.- 21(B)]

Extra for suspension exceeding 25cm with S&F additional 2 no 20 mm dia EI conduit (14 SWG) supports & nnecy. PVC insulated wire andpainting etc. as required by 2x24/0.20 mm(1.5sqmm )flexible copper wire of 1.10 mt. length. [PWD SOR Page-C-3, Sl.- 21(B)]

Supply & Fixing MS fan clamp of two picec type for RC ceiling as per approved specification, fabricated fron 40mm x 9mm MS flat including making good damages to building roof with satisfactory finishing and painting . [PWD SOR Page-D-14, Sl.- 29]

Fixing only exhaust Fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. Length of PVC insulated wire and making connection for exhaust of 30 cm (12") diameter. [PWD SOR Page-C-4, Sl.- 28]

Fixing only cabin Fan on wall /ceiling by S&F rag bolts, nuts & washers (6mm dia x 62 mm long) or as reqd incl.S&F 24/0.20 PVC insulated flexable copper wire 0.5 mt. length. [PWD SOR Page-C-4, Sl.- 29]

Supply & Fixing 240 V AC / DC superior type Ding - Dong Call Bell (Anchor) (Anchor) on HW board incl. S&F HW board. [PWD SOR Page-D-13, Sl.- 20(a)]

Supply & Fixing 240 V Modular socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular G.I. switch board with top cover plate incl. making necy. connection etc. [PWD SOR Page-E-18, Sl.- 10]

Supply & Fixing Modular type RJ 45 sitable for CAT 6 cable (Brand approved by EIC) on existing PVC Board and top cover plate on wall and making necessary connections as required. [PWD SOR Page-E - 18, Sl.- 7 a]

Supply & Fixing Telephone socket (RJ11) Modular type (Brand approved by EIC) on existing GI Modular Board having top cover plate and making necessary connections as required. [PWD SOR Page-E - 18, Sl.- 7 b]

Supply & Drawing LAN cable (CAT 6)(Brand approved by EIC) in prelaid PVC rigid conduit / in polythene pipe embeded in wall. [PWD SOR Page-E - 19, Sl.- 21]

Supply & Drawing two pair Tlephone cables with high dencity polythene insulated solid annealed high conductivity bare copper of dia 0.5mm in pre laid PVC rigid conduit / in polythene pipe embeded in wall.(Brand approved by EIC) in prelaid PVC rigid conduit / in polythene pipe embeded in wall. [PWD SOR Page-E - 19, Sl.- 22]

Supply & Fixing RJ 45 sitable for CAT 6 xcable (Brand approved by EIC) with PVC Board and top cover plate on wall and making necessary connections as required. [PWD SOR Page-E - 18, Sl.- 8 a]

Supply & Fixing telephone socket ( RJ 11) Modular type (Brand approved by EIC) with PVC Board and top cover plate on wall and making necessary connections as required. [PWD SOR Page-E - 18, Sl.- 8 b]

Earthing with 65 mm dia GI pipe (TATA-Medium) x 3.0 Mts long and 1 No. 50mm x 6mm galvanized (Hot Dip) steel strip (4 Mts long), 20 mm dia x 125mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes ect. And S&F 80mm dia GI pipe (ISI Medium) protection (3-Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts. [PWD SOR Page-G-1 Sl.-2 c ]

Providing masonary enclosure on the top of the earth electrode of overall size 86.36cm x 86.36cm x 46 cm deep (below ground level) complete with cemented brick work (1:6) of 25cm width duly plastred with cement morter (inside) CI hinged inspection cover of size 36.56cm x 35.56cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe. [PWD SOR Page-G-2 Sl.-3a ]

Extra for treatment of soil by using salt & charcoal or coke for plate electorde. [PWD SOR Page-G-2 Sl.-3b ]

Supply of Fitting & Fixtures: 1x20 watt LED light fitting (approved make) with 2 nos. 36 watt flurocent lamps with all materials and connections as 1x20 watt LED (Philips /Havells /CGL)

S & F 1200 mm sweep ceiling fan without regulator double ball bearing (approved crompton / polae /Havells)

Supply,delivery, fitting, fixing & electrical connection (including fright, insurance, incidental charges, Taxes, Duties, Cess etc. as applicable) of 230 / 250V.A.C., 50Hz, Fan (Crmpton / Havell's) complete with blades, regulator, canopy, fork, rubber bush etc. as follows: a) Wall mounted / wall bracketed, oscillating, with guard, 400 mm sweep.

Supply,delivery, fitting, fixing & electrical connection (including fright, insurance, incidental charges, Taxes, Duties, Cess etc. as applicable) of 230 / 250V.A.C., 50Hz, Fan (Crmpton / Havell's) complete as follows: a) Exhaust Light duty 300 mm sweep.

Supply,delivery, fitting, fixing & electrical connection (including fright, insurance, incidental charges, Taxes, Duties, Cess etc. as applicable) of 230 / 250V.A.C., 50Hz, Lamps including its complete fitting as follows:18 watt, LED, non-retrofit type , with fittings of recessed mounting,SQUIRE type, mirror optics (Philips/Havell's) .

Supply,delivery, fitting, fixing & electrical connection (including fright, insurance, incidental charges, Taxes, Duties, Cess etc. as applicable) of 230 / 250V.A.C., 50Hz, Lamps including its complete fitting as follows:18 watt, LED, non-retrofit type , with fittings of recessed mounting, ROUND type, mirror optics (Philips/Havell's) .

Earthing of Administrative building with supply of Copper Rod (TRISHUL)with necessary G.I. Flat (earth strip of 65x8 mm) and nut bolt by means of wealding and bolting & fixing as per engineer in charge.

Earthing of different equipment and structure in different floor with supply of G.I. Flat (earth strip of 65x8 mm) of Barasat Administrative Building . Flat by raising the said strip from earth mat / pit by means of wealding and bolting & fixing as per instruction of site Engineer.

Supply and laying of 6 sq mm 4 core Copper Armoured cable directly in wall with necessary clamp, nut bolt, washer etc. (for Lift) and cutting concrete and laid with G.I. pipe where necessary (for yard light)

Termination of above cable including supply and fixing of Gland aluminium lugs etc. (Standred quality.

Supply and drawal of main line with 650 / 1100 V grade with PVC insulated 2x(1x 4 sqmm ) copper wire and 1.5 sq mm. PVC insulated earth continuity conductor (green colour)

Supply,delivery, fitting, fixing & electrical connection (including fright, insurance, incidental charges, Taxes, Duties, Cess etc. as applicable) of 230 / 250V.A.C., 50Hz, Lamps including its complete fitting as follows: a) 1x 20 Watt,LED Bulkhead (Phlips) with water tight fittings..

Supply, fitting and fixing of Arm Bracket with GI Clamp, Nut & Bolt on PCC Pole/Rail pole. a ) Single Arm Bracket.

Supply,delivery, fitting, fixing of Junction Box on the base of pole providing in and out going cable.

Supply & installation of Yard Light of make Philips / Havells / CGL 90 watt LED.

Supply & installation of 1.5 ton capacity 5 star Split type Air Conditioning of make of Hitachi / Daikin / Blue star.

ASIA CONSTRUCTION

SATABDI ENGINEERING COMPANY