Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹40.4 L
EMD Value
₹40,357
Closing Date
9 Mar 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
NBCC Bhawan
NBCC Bhawan
Civil Work, Partition Wall, Painting, Ceiling & Flooring, electrical, Air-condition/VRV, IT works etc
NSL/CEO/CBI/NIT/2023/545~EWf4b04b503e3742f165c107cb
NSL/CEO/CBI/NIT/2023/545
Open Tender-Domestic
Civil Works General
NBCC Bhawan
₹2,950
₹40,357
9 Mar 2023
1 Mar 2023
9 Mar 2023
1 Mar 2023
9 Mar 2023
TOTAL AMOUNT TOTAL AMOUNT
Total Amount 1623572.44 2309332.00
Grand Total amount (NDSR+DSR Amount) 4035676.57
BILL OF QUANTITIES
ESTIMATE INTERIOR WORKS FOR I.O. CABIN'S AT GROUND FLOOR, CBI HEAD QUARTER, NEW DELHI.
(I) CIVIL/ INTERIOR WORKS : SCHEDULE ITEMS - DSR-2021
S.No. DSR-2021 Description of item Unit Qty. Rate DSR Amount
1 Providing, hoisting and fixing above plinth level up to floor five
level precast reinforced cement concrete in lintels, beams
and bressumers, including setting in cement mortar 1:3 (1 cement
: 3 coarse sand), cost of required centering and shuttering but ,
5.15 excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5
coarse sand (zone-III) derived from natural sources : 3 graded
stone aggregate 20 mm nominal size derived from natural
2 Steel reinforcement for R.C.C. work including straightening,
5.22A cutting, bending, placing in position and binding all complete
above plinth level.
5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 50.00 89.65 4482.50
3 Brick work with common burnt clay F.P.S. (non modular) bricks
of class designation 7.5 in superstructure above plinth level up to
floor V level in all shapes and sizes in : Cement mortar 1:4 (1
cement : 4 coarse sand) Cum. 4.00 8512.10 34048.40
4 9.105 Providing and fixing partition upto ceiling height consisting of G.I.
frame and required board, including providing and fixing of frame
work made of special section power pressed/ roll form G.I. sheet
with zinc coating of 120 gms/sqm(both side inclusive), consisting
of floor and ceiling channel 50mm wide having equal flanges of
32 mm and 0.50 mm thick, fixed to the floor and ceiling at the
spacing of 610 mm centre to centre with dash fastener of 12.5
mm dia meter 50 mm length or suitable anchor fastener or metal
screws with nylon plugs and the studs 48 mm wide having one
flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed
vertically within flanges of floor and ceiling channel and placed at
a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts,
including fixing of studs along both ends of partition fixed flush to
wall with suitable anchor fastener or metal screws with nylon
plugs at spacing of 450 mm centre to centre, and fixing of boards
to both side of frame work by 25 mm long dry wall screws on
studs, floor and ceiling channels at the spacing of 300 mm centre
The boards are to be fixed to the frame work with joints staggered
to avoid through cracks, M.S. fixing channel of 99 mm width (0.9
mm thick having two flanges of 9.5 mm each) to be provided at
the horizontal joints of two boards, fixed to the studs using metal
to metal flat head screws, including jointing and finishing to a
flush finish with recommended jointing compound, jointing tape,
angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher
and two coats of primer suitable for board as per manufacture's
specification and direction of engineer in charge all complete.
75 mm overall thickness partition with 12.5 mm thick double skin
fire rated Glass Reinforced Gypsum (GRG) plaster board
conforming to IS: 2095: part 3 (Board with BIS certification marks)
5 Providing and laying Vitrified tiles in floor ( To match existing at
site) with different sizes (thickness to be specified by the
manufacturer), with water absorption less than 0.08% and
conforming to IS:15622, of approved brand & manufacturer, in all
11.49 colours and shade, laid with cement based high polymer modified
quick set tile adhesive (water based) conforming to IS : 15477, in
average 6 mm thickness, including grouting of joints (Payment for
grouting of joints to be made separately).
BILL OF QUANTITIES
S.No. DSR-2021 Description of item Unit Qty. Rate DSR Amount
6 Providing and fixing false ceiling at all height including providing
and fixing of frame work made of special sections, power pressed
from M.S. sheets and galvanized with zinc coating of 120
gms/sqm (both side inclusive) as per IS : 277 and consisting of
angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27
mm and 37mm, at 1200 mm centre to centre, one flange fixed to
the ceiling with dash fastener 12.5 mm dia x 50mm long with
6mm dia bolts, other flange of cleat fixed to the angle hangers of
25x10x0.50 mm of required length with nuts & bolts of required
size and other end of angle hanger fixed with intermediate G.I.
channels 45x15x0.9 mm running at the spacing of 1200 mm
centre to centre, to which the ceiling section 0.5 mm thick bottom
wedge of 80 mm with tapered flanges of 26 mm each having lips
of 10.5 mm, at 450 mm centre to centre, shall be fixed in a
direction perpendicular to G.I. intermediate channel with
connecting clips made out of 2.64 mm dia x 230 mm long G.I.
wire at every junction, including fixing
perimeter channels 0.5 mm thick 27 mm high having flanges of
20 mm and 30 mm long, the perimeter of ceiling fixed to
wall/partition with the help of rawl plugs at 450 mm centre, with
25mm long dry wall screws @ 230 mm interval, including fixing of
gypsum board to ceiling section and perimeter channel with the
help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c,
including jointing and finishing to a flush finish of tapered and
square edges of the board with recommended jointing compound
, jointing tapes , finishing with jointing compound in 3 layers
covering upto 150 mm on both sides of joint and two coats of
primer suitable for board, all as per manufacturer's specification
and also including the cost of making openings for light fittings,
grills, diffusers, cutouts made with frame of perimeter channels
suitably fixed, all complete as per drawings, specification and
direction of the Engineer in Charge but excluding the cost of
painting with :
12.45.3 12.5 mm thick tapered edge gypsum moisture resistant board Sqm. 77.00 1300.50 100138.50
7 Providing and fixing thermal insulation with Resin Bonded Fibre
glass wool conforming to IS: 8183 having density 24 kg/m3, 50
mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall
12.57 with screw, rawel plug & washers and held in position by criss
crossing GI wire etc. complete as per directions of Engineer-in-
8 13.4 12 mm cement plaster of mix:
13.85 Applying priming coats with primer of approved brand and
13.85.3 With water thinnable cement primer on wall surface Sqm. 142.00 64.5 9151.90
9 Providing and applying white cement based putty of average
thickness 1 mm, of approved brand and manufacturer, over the
plastered wall surface to prepare the surface even and smooth
10 Wall painting with premium acrylic emulsion paint of interior
grade, having VOC (Volatile Organic Compound ) content less
13.83 than 50 grams/ litre of approved brand and manufacture,
including applying additional coats wherever required to achieve
even shade and colour. Sqm. 124.00 121.55 15072.20
11 Demolishing brick work manually/ by mechanical means
including stacking of serviceable material and disposal of
unserviceable material within 50 metres lead as per direction of
Engineer-in-charge.
15.7.4 In cement mortar Cum. 19.00 1698.45 32270.55
BILL OF QUANTITIES
S.No. DSR-2021 Description of item Unit Qty. Rate DSR Amount
12 Dismantling tile work in floors and roofs laid in cement mortar
including stacking material within 50 metres lead.
15.23.1 For thickness of tiles 10 mm to 25 mm Sqm. 15.00 60.50 907.50
BILL OF QUANTITIES
S.No. DSR-2021 Description of item Unit Qty. Rate DSR Amount
13 Dismantling aluminium/ Gypsum partitions, doors, windows,
fixed glazing and false ceiling including disposal of unserviceable
15.57 material and stacking of serviceable material with in 50 meters
lead as directed by Engineer-in-charge. Sqm. 179.00 46.50 8323.50
14 Providing and fixing mineral fibre false ceiling tiles at all
heights of size 595X595mm of approved texture, design and
pattern. The tiles should have Humidity Resistance (RH) of 99%,
Light Reflectance ? 85%, Thermal Conductivity k = 0.052 - 0.057
w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true
horizontal level suspended on interlocking T-Grid of hot dipped all
round galvanized iron section of 0.33 mm thick (galvanized @120
gsm) comprising of main T runners of 15x32 mm of length 3000
26.27 mm, cross T of size 15x32mm of length 1200 mm and secondary
intermediate cross T of size 15x32 mm of length 600 mm to form
grid module of size 600x600 mm suspended from ceiling using
galvanized mild steel item (galvanised@80gsm) 50 mm long
8mm outer diameter M-6 dash fasteners, 6 mm diameter fully
threaded hanger rod up to 1000 mm length and L-shape level
adjuster of size 85x25x2 mm, spaced at 1200 mm centre to
centre along main ‘T’.
The system should rest on periphery walls /partitions with the
help of GI perimeter wall angle of size24x24X3000 mm made of
0.40 mm thick sheet, to be fixed to the wall with help of plastic
rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S.
screws. The exposed bottom portion of all T-sections used in
false ceiling support system shall be pre-painted with polyester
baked paint, for all heights. The work shall be carried out as per
specifications, drawings and as per directions of the engineer-in-
With 16 mm thick beveled tegular mineral fibre Antimicrobial
false ceiling tile confirming to ISO 5 (class 100) specifications Sqm. 77.00 2189.55 168595.35
(II) NON - SCHEDULE ITEMS
15 Providing and fixing in position film of approved colour, design
& texture over glass wherever required complete in all respects
as shown in the deatiled drawing and as directed by Engineer-in-
16 Providing and fixing 12 mm thick frameless toughened glass
door shutter of approved brand and manufacture, including
providing and fixing top & bottom pivot & double action hydraulic
floor spring type fixing arrangement, Door handle, lock and
stopper etc and making necessary holes etc. for fixing required
door fittings, all complete as per direction of Engineer-incharge. Sqm. 20.00 9775.00 195500.00
17 Removing and relocating of Existing Changing Room cubicle
at site as per the direction of the Engineer-in-charge. Nos. 4.00 15000.00 60000.00
18 NS-4 Providing and fixing in position 12.5 mm thick double skin fire
rated Glass Reinforced Gypsum (GRG) plaster board
conforming to IS: 2095: part 3 (Board with BIS certification
marks). The boards are to be fixed to the existing surface/frame
work with joints staggered to avoid through cracks, using metal to
metal flat head screws, including jointing and finishing to a flush
finish with recommended jointing compound, jointing tape, angle
beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and
two coats of primer suitable for board as per manufacture's
specification and direction of engineer in charge all complete as
per direction of Engineer-incharge.
BILL OF QUANTITIES
S.No. DSR-2021 Description of item Unit Qty. Rate DSR Amount
TOTAL CIVIL/ INTERIOR WORKS 740293.94 477384.00
ESTIMATE HVAC WORKS FOR I.O. CABIN'S AT GROUND FLOOR, CBI HEAD QUARTER, NEW DELHI.
S.No. DSR No. Item Description Unit Qty Rate DSR Amount
SUB HEAD "A" : DUCTING, GRILLES & INSULATION WORKS
Rectangular / Square Ducting ( Site fabrication )
1 16.12 Supply, installation, balancing and commissioning of fabricated at site GSS
sheet metal rectangular/round ducting complete with neoprene rubber
gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per
approved drawings and specifications of following sheet thickness complete
2 16.13 Supply, installation, testing and commissioning of GI volume control duct
damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages,
flanges etc, as per specifications. sqm 2 7,046.00 14,092.00
3 16.15 Supplying & fixing of powder coated extruded aluminium Supply Air Grills with
aluminium volume control dampers as per specifications. sqm 2 9,105.00 18,210.00
4 16.16 Supplying & fixing of powder coated extruded aluminium Return Air Grills with
louvers but without volume control dampers complete as required. sqm 3.05 5,910.00 18,025.50
5 16.17 Supplying, fixing testing commissioning of supply air diffusers of powder
coated aluminium with aluminium volume control dampers with anti smudge
ring & removable core. sqm 1 12,184.00 12,184.00
6 16.18 Supplying, fixing testing commissioning of Return air diffusers of powder
coated aluminium without volume control dampers with anti smudge ring &
removable core. sqm 1 8,121.00 8,121.00
Duct Accoustic Lining
7 16.21 Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm
thick resin bonded glass wool having density of 32 kg/m³, with 25 mm X 25
mm GI section of 1.25 mm thick, at 600 mm centre to centre covered with
Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet
fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins,
CPRX compound etc. complete as required and as per specifications.
Duct External Insulation
8 16.23 Supplying and fixing of following thickness duly laminated aluminum foil of
mat finish closed cell Nitrile rubber (Class "O") insulation on existing duct
after applying suitable adhesive for Nitrile rubber. The joints shall be sealed
with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation
complete as per specifications and as required.
9 MR Dismantling, lifting and shifting the existing installed main supply air duct &
Keep to asigned space / store at site under guidance of Site Incharge &
Reinstallation of dismantled duct (if usable) & New Duct tool piece / Collar as
per RCP Requirement etc. Lot 1 35,000.00 35,000.00
ESTIMATE ELECTRICAL WORKS FOR I.O. CABIN'S AT GROUND FLOOR, CBI HEAD QUARTER, NEW DELHI.
ELECTRICAL WORKS - SCHEDULE ITEMS - (DSR-2022 and MR Items.)
S.No. DSR-2022 Description. Unit. Qty. Rate. DSR Amount
SUBHEAD-I BASED ON DSR - 2022
WRING IN STEEL CONDUIT
1 1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell
point with 1.5 sq.mm FRLS PVC insulated copper
conductor single core cable in surface / recessed steel
conduit, with modular switch, modular plate, suitable GI box
and earthing the point with 1.5 sq.mm FRLS PVC insulated
copper conductor single core cable etc. as required.
2 1.4 Wiring for twin control light point with 1.5 sqmm FRLS PVC
insulated copper conductor single core cable in surface/
recessed steel conduits, 2 way modular switch, modular
plate, suitable GI box and earthing the point with 1.5 sqmm
FRLS PVC insulated copper conductor single core cable
etc as required. Pts 9 1,981.00 17,829.00
3 1.5 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC
insulated copper conductor single core cable in surface/
recessed steel conduit alongwith 1 No. 4 sq. mm FRLS
PVC insulated copper conductor single core cable for loop
earthing as required. Meter 200 433.00 86,600.00
4 1.7 Wiring for circuit/ submain wiring alongwith earth wire with
the following sizes of FRLS PVC insulated copper
conductor, single core cable in surface/ recessed steel
conduit as required.
1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Meter 200 369.00 73,800.00
1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Meter 150 589.00 88,350.00
5 1.18 Supplying and drawing following pair 0.5 mm dia FRLS
PVC insulated annealed copper conductor, unarmored
telephone cable in the existing surface/ recessed steel/
PVC conduit as required.
6 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7
mm solid copper conductor PE insulated, shielded with fine
tinned copper braid and protected with PVC sheath in the
existing surface/ recessed steel/ PVC conduit as required. Meter 100 47.00 4,700.00
7 1.20 Supplying and fixing of following sizes of steel conduit
alongwith the accessories in surface/recess including
painting in case of surface conduit or cutting the wall and
making good the same in case of recessed conduit as
8 1.24 Supplying and fixing following modular switch/ socket on
the existing modular plate & switch box including
connections but excluding modular plate etc. as required.
1.24.6 Telephone socket outlet. Each 20 148.00 2,960.00
1.24.7 TV antenna socket outlet. Each 8 148.00 1,184.00
9 1.27 Supplying and fixing following size/ modules, GI box
alongwith modular base & cover plate for modular switches
in recess etc. as required.
10 1.31 Supplying and fixing suitable size GI box with modular plate
and cover in front on surface or in recess including
providing and fixing 3 pin 5/6 amps modular socket outlet
and 5/6 amps modular switch, connections, etc. as
required.(for ligt plugs to be used in no residental building). Each 20 477.00 9,540.00
11 1.32 Supplying and fixing suitable size GI box with modular
plate and cover in front on surface or in recess including
providing and fixing 6 pin 5/6 &15/16 amps modular socket
outlet and 15/16 amps modular switch, connections, etc. as
required. Each 20 586.00 11,720.00
12 1.54 Wiring for group controlled (looped) light point/fan
point/exhaust fan point/ call bell point (without independent
switch etc.) with 1.5 sq. mm FRLS PVC insulated copper
conductor single core cable in surface/ recessed steel
conduit, and earthing the point with 1.5 sq. mm FRLS PVC
insulated copper conductor single core cable etc. as
13 1.40 Providing and fixing plain 16/0.20mm (0.50sqmm) twin
circular flexible FRLS PVC insulated, PVC sheathed copper
conductor cable direct on the wall with PVC clips etc. as
required. Meter 300 40.00 12,000.00
14 1.41 Installation, testing and commissioning of pre-wired,
fluorescent fitting / compact fluorescent fitting of all types,
complete with all accessories and tube/lamp etc. directly on
ceiling/ wall, including connections with 1.5 sq. mm FRLS
PVC insulated, copper conductor, single core cable and
earthing etc. as required. Each 40 206.00 8,240.00
15 1.53 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in
the existing surface/ recessed Steel/ PVC conduit as
1.53.1 required.
1 run of cable Meter 1000 57.00 57,000.00
16 17.2.4 Supplying, installation, testing & commissioning of
intelligent analog addressable photothermal detector
complete with mounting base complete as required.
17 17.2.5 Supplying, installation, testing & commissioning of
response indicator on surface/recessed MS Box having two
LED, metallic cover complete with all connections etc as
TOTAL SCHEDULE ITEMS 5,60,856.00 -
SUBHEAD-II BASED ON MARKET RATE ITEMS.
Supply, Unloading, Receiving, Storing, Assembling,
Termination, Testing and Commissioning of the following
Type LED Lighting Fixtures with all fitting, driver, housing &
reflector, wiring complete with providing of all necessary
hardware’s like raw plugs, hangers, support plates as
required for fixing etc. Complete in all respect. All toll &
tackles, Hardware, required for successful installation,
testing & commissioning shall be in scope.
Fittings Rate considered As/ Museum estimate
18 MR-1 Recessed type LED 2x2 luminaire with CRCA housing
suitable with fully diffused prismatic diffuser for general
lighting in office areas. The luminaire should have a color
consistency SDCM < 5, CRI > 80 and CCT of both 4000K.
The luminaire shall be compliant with IP20 and IK02
classification. Luminaire shall be designed to emit at least
4000 nominal lumens and an outstanding backlit solution
efficacy of at least 124 lumen/watt and maximum system
wattage of 32W. The luminaire shall be designed so as to
ensure lumen depreciation of up to 30% over 50k burning
hours @ design ambient temp 45 deg C. The electronic
driver used shall have a power factor >0.95 and THD <10%
The fixture should comply with the parameters as per
IS10322. Similar to RC380B LED42S-4000 G5 L60W60
19 MR-2 IP20 Recessed LED Downlighter made of pressure die cast
aluminum housing, Fixture should have minimum efficacy
at System level (Not Chip Level) >=110lumens/watt with
Minimum system Lumens 2000 with maximum system
wattage of 18W. Life of fixture (Including Driver) : 50000
burning Hrs. @ L70B50 Lumen maintenance, CCT of
6500K (SDCM<5), CRI >80, PF >0.95, working temp range -
0°C < Ta < 45°C, and operating Voltage Range of 130 -
320 VAC. it should has a Minimum Internal Surge
Protection of 2.5KV. Electronic Switchable ballast. The
fixture design should comply with EMC / EMI compliance
along with BIS certification for LED Driver &
Luminaire.Luminaire manufacture shall provide LM79report
from NABL accredited lab & LM80 report issued by LED
manufacturer. BIS approved with R-Code, Similar to
DN296B LED20S PSU WH.
TOTAL MR ITEMS - 1,91,834.00
FURNITURE WORKS
S. No. DESCRIPTION OF ITEMS Unit. Qty. Rate. Amount.
I.O. Room Table 1800 x 900 with Side
Supply and installation of 25mm
PLPB Supported Top and 18mm
legs and modesty with 3Drawer
mobile pedistal
I.O. Room Back Storage 1800 x 450 x
Supply and installation of 18mm
thick PLPB Structure , inside
shelves and Swing doors with
High Back Chair
Supply and installation of
Chrome Base , PP Arms ,
3 Cushioned Seat Back with 7 12,925 90475
Leatherite upholstrey with
Shyinchro Mechanisum
Supply and installation of
Chrome Base , PP Arms ,
Cushioned Seat Back with
Leatherite upholstrey
ESTIMATE ELECTRICAL WORKS FOR I.O. CABIN'S AT GROUND FLOOR, CBI HEAD QUARTER, NEW DELHI.
S. No. DESCRIPTION OF ITEMS Unit. Qty. Rate. Amount.
SITC of 5MP1/2.7*5MP PS CMOS Image Sensor (0.9407
cmtrs) Max 5MP(2880 X 1620) and supports 2688 *1520(2688
x 1520)@25/30 fp. Smart H 265 and and Smart H 264 + Dual
1 stream encoding DWDR Day/Night (ICR), 3D -DNR, ROI, Nos. 10 12937.00 129370.00
AWB, AGC, BLC, HLC 3 GMM Lens 12.8 mm optional) IR
Range of 30 mtrs, IP67, POE Support Built- in Mic Mobile
Software : ICMOB, CMOBCMS Software KVMS Pro
SITC of 64 channel- 5MPUp to 04 channel IP Camera input
Max 320 Mbps incoming bandwidth instastream /H 265/ Smart
H.264 + /H 264 /MJPEG Up to 12 MP Resolution prewiew and
2 playback Support S SATA HDDsup to 16 TB Each, 4 USB Nos. 1 125000.00 125000.00
Ports (2 USB 3.0), 1 e SATA port 2HDMI/ 2VGA simultaneoues
video output Support multi brand network cameras Support
iCMOB, CMOB, CMS Software KVMS Pro
SITC of 16 Port POE Rack Mountable, Gigabit switch etc
complete as reqd
SITC of 8 Port POE Rack Mountable, Gigabit switch etc
complete as reqd
5 SITC of 10 TB Survelliance Hard disk Drive Nos. 8 29000.00 232000.00
SITC of 32 Inches full HD LED Display TV having display
resolution of 1920 x 1080, suitable for operation on 230 volts,
50 HR AC supply with heavy duty fixed MS Stand on wall
complete with all completion complete etc as reqd.
SITC of network 6U wall rack etc i.e, making connection etc.
Total Rs. 572859.00
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.06 MB
NIT.pdf
Tender Document
SCC.pdf
Tender Document
GCC_Contracting_2022.pdf
Tender Document
Instruction to Bidder for online Bid Submission.pdf
Tender Document
Drawing.pdf
Tender Document
BOQ.pdf
Tender Document
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .