SPL REPAIR TO T 7 ALONGWITH BATHROOM AND TOILET BLOCK OF 447 COY ASC SUP TYPE G UNDER GE DEHRADUN

Amount

Demolition brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work (Except bricks) straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6complete all as specified and directed. (Old bricks obtained from demolition will be reused)

Taking down cement plaster of any description on brick/stone/concrete wall surfaces of any description including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surface of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of primer with a layer of putty 1.0mm thick complete all as specified and directed.

M&L for complete removal of existing treatment from wall and preparing the surface with wall care putty 1.0mm thick and applying two coats of oil bound distemper complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size n.exc 1.50 Sqm each including making good disturbed portion of wall complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size exc 1.5sqm but n.exc 4.0 Sqm each including making good disturbed portion of wall complete all as specified and directed.

S&F Pressed steel frames of size 105x60 mm for doors made out of 1.25mm thick mild steel sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc frame filled with and including cement concrete1:2:4 type B-0 (using 12.5 mm graded stone aggregate) complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section Fe 410 W Gde E 250 with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L for 35mm thick 2nd class hard wood factory made plain framed panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply.The size of rail and stile as per IS:1003 (Part1),kiln seasoned and chemically pressure treated, all as specified and directed.

S & F Framed work such as grills, gates,gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; framed angle for chain link fixing, barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specfied and directed.

S&F factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company. The door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed. Make:ECHON/Kumar Tech/TVL Engineers Ltd (Floresta)/Rajshree

S&F 24 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as as directed. Make:ECHON/Kumar Tech/TVL Engineers Ltd (Floresta)/ Rajshree .

S&F factory made steel ventilator fixed/hinge type with glazing bars complete all as specified and directed.

S&F factory made steel windows with side hung shutters including box type hinges with MS handles and tower bolts complete with glazing bars dovetailed or welded with one shop coat of primer complete all as specified and directed.

S&F factory made steel windows with side hung shutters including box type hinges with MS handles and tower bolts complete without glazing bars dovetailed or welded with one shop coat of primer complete all as specified and directed.

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares n.exc 0.5 sq. m in each pane complete all as specified and directed.

S&F 150 mm long solid in one piece stainless steel barrel tower bolts complete all as specified and directed.

S&F 100 mm size mild steel butt hinges medium weight cold rolled complete all as specified and directed.

S&F 125 mm long solid in one piece stainless steel handle complete all as specified and directed.

S&F stainless steel sliding door bolt size 300 mm long (bolt type ot less than 12mm) with hasp, staple and fixing clips of SS sheet and SS fixing bolts complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, Overall length of cover plate 140mm complete all as specified and directed.

Dismantling/Taking down asbestos cement (corugated or semicorrugated etc) sheets, in roof covering including ridge complete all as specified and as directed.

Dismantling timber scantling 40 Sqcm and over in section in framed/unframed work in any position complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

S&F mild steel for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, etc. conforming FE-410W (Gde E-250) quality A complete all as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls etc fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls etc fixed with self tapping screws complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on old previously treated steel surfaces of any description over 10 cm width or girth including preparation of steel surfaces complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on old previously treated wood & wood based material of any description over 10 cm width or girth including preparation of wooden surfaces complete all as specified and directed.

M&L for Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick, area of each tile exc 0.11sqm but not exc 0.18sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L for coloured Glazed ceramic tiles in vertical surfaces in dado, skirting of size 300mm x 450mm x 7mm thick fixed over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L for machine cut kota stone slab flooring 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing laid over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M & L for machine cut kota stone slab as in skirting 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing fixed over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar and making good dismantled portion in cement 1:3 or cement concrete 1:2:4 Type B-1 as required Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall (Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall ) Exceeding half brick but not exc. One brick complete as specified and directed.

M & L for 18 to 20mm thick granite ( colour as approved by GE) stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform/dado/skirting /plateform counter top WHB in cluding cutting holes for oval shape /urinal partitions etc. including 15 mm thick cement screed bed 1:6 CM in horizontal or vertical surfaces including grinding the edges half round and polishing complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C-1 (Using 20mm graded stone aggregate) as in plinth protection/path laid in panels, finish the top surfaces even and smooth without using extra cement complete including filling the joints with bitumen and coarse sand mixture. 1:3 by weight complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal from site for 15 mm bore GI tubing complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal from site for 20mm bore GI tubing complete all as specified and directed.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm width in brick wall complete all as specified & directed.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing complete all as specified and directed..

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing complete all as specified and directed..

S&F in repair vitreous china squatting pan orissa pattern long pan size 580 mm x440mm white with integral foot rests (excluding flushing cistern & flush pipe) but including cement concrete bedding and connection complete all as specified and as directed

S&F in repair Vitreous china wash down water closet pan (pedestal pattern) dual flush, single piece EWC fancy type, white including flushing cistern, Plastic water closet seat cover, white, closed pattern with flat bottom and connection complete all as specified and as directed

S&F in repair PVC low level flushing cistern 10 litres, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flushing pipe for squatt pattern complete all as specified and directed.

S&F in repair 75mm bore PVC(SWR), waste and vent single socketed pipes, in any length, with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repair 110mm bore PVC(SWR), waste and vent single socketed pipes, in any length, with rubber ring joints,fixed to wall complete all as specified and directed.

S&F in repair PVC (SWR) 75mm dia, bend with oval acess door, T' socket reducer etc complete all as specified and directed.

S&F in repair PVC (SWR) 100mm dia, bend with oval acess door, T' socket reducer etc complete all as specified and directed.

S&F in repairs vitreous china wash hand basin white of size 550X400mm including 32mm bore waste coupling & waste pipe and CI cantilever brackets and cutting for and pinning in walls & making good complete all as specifed and directed.

S&F in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, fancy type screwed for iron of 15mm bore of pipe complete all as specified and directed.

S&F in repair brass chromium plated ovehead shower with shower arm complete all as specified and directed.

S&F in repair stop valves/angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and as directed

S&F in repair bib tap long body fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed

S&F in repair health faucet chromium plated suitable for 15mm dia pipe with 1.20 mtr long metalic expandable tube and hook fixed to wall all as specified and directed.

S&F in repair CP steel grating 100 mm to 125mm dia round fix on floor/nahani trap with hole/without fixed with cement morter, complete all as specified and directed.

S&F in repair 20 mm dia brass chromium plated towel rack of 3 sets type 60cm long between flanges including pair of fixing brackets complete all as specified and directed.

S&F in repairs brass chromium plated towel ring complete all as specified.

S&F in repair CP toilet paper holder with flat recessed type stainless steel fixed to wall with CP brass screw complete all as specified and directed.

S&F in repair brass CP waste fittings/coupling 32mm dia with fly nuts suitable for wash hand basin/sinks/ urinals etc complete all as specified and direted.

S&F in repair 20 mm dia stainless steel 204 grade drapery rod 1mm thick with final decorative, including brackets, decorative knobs at both ends and curtain rings 8Nos minimum complete all as speccified and directed.

S&F 1000 litre rotational moulded tripple layer polyethlene water storage tanks white colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including taking down old unserviceable tank any capacity complete all as specified and directed.

S&F in repair for 75 mm bore out let cast floor trap spun pipe (conforming to IS 3989) incl cockroach trap with gratings including jointing to waste pipe fixed in cement concrete tpe B-1 (1:2:4) etc complete all as specified and as directed.

S&F ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for 20mm bore iron pipe and fixed ( minimum weight 20mm -210 gms) complete all as specified and directed.

M&L for providing & fixing false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grams, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and cross 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 4mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 4mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, including taking down old ceiling any type complete all as specified and directed.

M & L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in window or door cill,lintel, benching to drain, holdfast, coping, bed block, posts, boundary pillars, bonders etc. and the like edge slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre depth for foundation, manhole etc not exc 10 Sqm on plan and not exc 1.5 metre in depth including getting out in soft/loose soil complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete, sub base or leveling course of floor etc complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 ( using 40mm graded stone aggragate) as in surface channel and drains including necessary form work complete all as specified and directed

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 CM in soft/loose soil complete all as specified and directed.

Removing excavated surplus soil/material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.

S&F 150mm internal dia of pipe salt glazed stoneware drain pipes grade 'A', laid in trenches and jointed in CM 1:1, complete all as specified and directed.

M&L forr 60mm thick vibromatic reinforced precast cement concrete 1:1:2 type B-1 (using 20mm graded stone aggregate) with 1mm thick mild steel CR sheet around, painted with 2 coats of bituminous paint, as in man hole cover slabs finish fair even and smooth without using extra cement ( Top surface will be chequred finish) including necessary forming work, 100mm long handle of 12mm dia round bar counter sunk by 25mm welded to reinforcement complete all as specified and directed. Note: (i) CA No. and date will be engraved on covers. (ii) Reiforcement shall be measured and paid separately. (iii) Curing will be carred out with ponding method.

M&L for hardcore of broken bricks or boulder gauge exc 63mm but n. exc 100mm, deposited , spread and levelled in layers n.exec 15 cm thick, watered and rammed to a tue surface complete all as specified.

M&L for 75mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and as directed.

M & L for sand filling under floors or in foundations including spreading & levelling complete all as specified directed.

M & L for pre-painted coloured (Red/Yellow) machine pressed precast concrete interlocking paver blocks of any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and pigment complete all as specified and directed.

M & L for coloured (Red & Yellow) prepolished rubber moulded chequred cement concrete tile of size 30 cm x 30 cm x 20 to 22 mm thick with spacers 3mm, set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for construction of 50 users septic tanks complete as shown on CE Bareilly Zone TD drg No.217 sht 1/7 to 7/7 complete all as specified and directed.

M&L for construction of 1.20m internal dia and 3.0m effective depth, soakage wells exc in ordinary soil complete as shown on CE Bareilly Zone TD drg No.309 sht 1/4 to 4/4 complete all as specified and directed.

Taking down carefully copper/Aluminum point wiring (light, fan socket and power) complete including switches, ceiling rose lamp holder and regulator etc and removing from site and making good disturbed surfaces of walls/floors etc complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm (nominal area) FRLS, single core PVC insulated 1100 Volts, grade multistranded copper conductor unsheathed in and including concealed PVC conduit medium duty 20 mm dia or higher and heavy grade conduit fittings and heavy duty accessories with suitable size of sunk type cast iron or pressed steel terminal box 1.2mm thick for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, one green colour FRLS cable of same size as earth wire up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge. Note: The wiring to be done as per IE rule and maintain colour code accordingly.

One light/exhaust fan point controlled by one-one way switch.

One ceiling fan point controlled by one-one way switch through regulator.

One three pin 5 Amp socket on same board with other switches.

One three pin 5 Amp socket on independent board

All as per item No.93 above but one 3 pin socket outlet 15 Amp on independent board with 2.5 Sq mm PVC insulated FRLS copper conductor, with earth continuity coductor of size 2.5 Sq mm complete all as specified and directed.

S&F switch piano flush type, 6A, one way, 230 volts all as specified and directed.

S&F socket outlet 5/6A, 3 pin, 230 volts all as specified and directed.

S&F socket outlet multipurpose having provn for 3 pin, 230 volts 15/16Amp all as specified and directed.

S&F switch piano flush type, 15/6A, one way, 230 volts all as specified and directed.

S&F ceiling rose, surface bakelite 3 terminal suitable for batten fitting complete all as specified and directed.

S&F lamp holder, Polycarbonate insulated body with back plate suitable for batten fittings complete all as specified and directed.

S&F step type fan regulator, socket type double module 5 step for 1200/1400mm sweep ceiling fan 120W, 230 volts all as specified and directed.

S&F in replacement wall mounted LED tube light fitting 1x20/22 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed.

S&F in replacement mirror light decorative compact luminarious with decorative ends caps 9/10 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in replacement energy saving,surface mounted, LED 10 watt Bulk head luminaire with decorative oval diffuser comprising of high brightness LEDs complete all as specified and directed.

S&F of ceiling fan 1200 mm sweep single phase 230 volts double ball bearing with down rod , canopy, blades, 340RPM, 200CMM 50watt including connecting with twisted three cord flaxible copper conductor cable (23/.0076 ) from ceiling rose to connector of fan comlete all as specified and directed.

S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep,1400RPM, 1300CMM,70watt with, blades, frame and louvers complete all as specified and directed.

S&F water stortage electric geyser 25 Ltr capacity with 5 star BEE rating with all fixing arrangement including nuts, bolts, washer, brakets etc as required complete all as specified and directed.

S&F in replacement of Distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection.Note:- DB and MCCB/MCB shall be of same make.

S&F in replacement of Distribution board SPN 4 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection.Note:- DB and MCCB/MCB shall be of same make.

S&F in replacement distribution box MCB protected socket with steel enclosure 20Amp MCB DBOXX combo DP including plug top complete all as specrified & directed

S&F MCB SP 240 volt 10 KA, 5 to 32 Amp, 'C' series complete all as specified & directed.

S&F MCB SPN 240 Volt 10 KA, 20-32 Amp, 'C' series complete all as specified and directed.

M&L for submain wiring with 3 runs (N+P+E) of 4.0 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLS cable 1100 volts grade drawn through and including concealed/flexible PVC conduit pipe of medium duty not less than 15mm dia including necessary PVC conduit specials and connecting with suitable size thimble, including taking old wiring complete all as specified and directed. Note:-3 runs of 4.0Sqmm size PVC copper cable and one run of PVC conduit shall be measured as one unit length.

Supply, laying and testing XLPE insulated galvanised steel strip or wire armoured elctric power cable with stranded aluminium conductor 1100 V grade of size 10 sq mm 2 core after cutting to required length with necessary glands, nuts, bolts, and lugs laid in trenches/fixed to wall etc complete all as specified and directed

M&L for sand cushioning and covering of UG cable using crushed metal sand in trenches for cable protection all as specified and directed.

M&L for brick well burnt Class ‘B’ as cover to U/G cable laid dry flat over the cable with width equal to length of the cable and abutting each other with gap between adjacent slab not exceeding 10mm over under ground cable for cable protection in trenches complete all as specified and directed

Supply & Laying in replacement of GI Steel tubing light grade 40 mm dia including all fitting laying in trenches across road or grouting /fixing on wall for protection of cable complete all as specified and directed by Engr-in-charge.

S&F building security light fitting LED type of die-cast IP-66 aluminium housing, 60 Watt, LED 6000K lence type toughened glass having seprate surge protector 10 KV , efficiecy of minimum 100/110 lumens /watt, incu adobter if any , prewired complete incuding 40/32 dia GI Light grade for bracket of fitting as reqd up to 1.2 RM proper shaped , bended (120 degree) threaded & drilling holes for wire entry & MS clamps made out of flat iron of suitable size incl painting all as specified & directed

M&L for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground end vertically to a depth not less than 2.25 meter deep below ground level with top edge of the earth plate at a depth not less than 1.5 M below normal ground level connected to galvanized steel earth wire 4 mm dia by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1, cover slab 30cm x 30cm x 10cm reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways, and with one handle for lifting made out of 10 mm dia MS round bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing (light grade) for protection of earth lead connection, including necessary excavation and earth work in any type of soil and necessary testing complete all as shown on electrical plate No. 5 of SSR Part –I (2009) incl demolition of existing earthibg complete all as specified and directed.

M/S C S AITHANI (BID ID -3299810)

M/s MAA SHAKTI CONSTRUCTIONS AND SUPPLIERS (BID ID -3300223)

VERDHMAN ASSOCIATES (BID ID -3299675)

M/S SEWA AND SERVE BUILDERS (BID ID -3300353)