Repair and renovation work as per the requirement of varius municipal corporation owned building like sub zonal office libray gym and UHC building un ghatlodia ward in the north west Zone.

Name of Work:- ઉ ર પિ મ ઝોન ઘાટલોડ યા વોડમાં આવેલ ુ દ ુ દ િુ નિસપલ કોપ રશન હ તક બ ડ ગો વી સબ ઝોનલ ઓફ સ,

Sr.No Oty. Item Description Rate Unit Amt.Rs.

Excavation for foundation upto 1.5 m depth including sorting out and

1 stacking of useful materials and disposing off the excavated stuff upto

Meter lead.(A) Loose or soft soil

1.a 10 Upto 1.5 mt Depth 201.81 Cmt

1.b 5 1.5 to 3.0 mt.depth 222.72 Cmt

2 10 Filling in foundation and plinth with murrum or selected soil in layers of 286.20 Cmt

20cm. thickness including watering, ramming and consolidating etc.

3 Providing and laying cement concrete1:5:10 (1-Cement: 2492.51 Cmt

5- coarses sand and:10-hand broken stone aggregates 40mm

5 nominal size) and curing complete excluding cost of formworkin

(A) Foundation and Plinth.

4 2 Providing and laying cement concrete1:4:8 (1-Cement: 2653.67 Cmt

4- coarses and:8 hand broken stoneaggregates 40mm nominal size) and

curing complete excluding cost of formworkin (A) Foundation and Plinth

5 Providing and laying cement concrete1:3:6 (1-Cement: 3- coarses 2976.00 Cmt

sand and:6-hand broken stone aggregates 40mm nominal size) and

1 curing complete excluding cost of

formworkin (A) Foundation and Plinth.

6 1 Providing and laying cement concrete 1:3:6 (1-Cement:3-coarse 4006.15 Cmt

sand:6-crushed stone aggregates 20mm nominal size) and curing

complete including cost of formwork in (A)

wall caps/coping

7 Providing and laying cement concrete work 1:2:4 ((1-

Cement:2- coarse sand:4-graded aggregates 20mm nominal size)

curing complete excluding cost of formwork

and reinforcement.

7.a 3 Foundations, footings, base or columns and mass concrete 3923.53 Cmt

7.b 1 Slabs, landing, shelves, balconies, lintels, beams, girders 4012.47 Cmt

and cantilivers upto floor two level

7.c 1 Independent piers, columns, and pillars, upto floor two level 3661.30 Cmt

Provdg. & laying cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 6487.07 Cu.M.

graded stone aggregates 20 mm nominal size) for

reinforced concrete chhajjas not exceeding 10 cm. thickness

2 1 upto floors two level including finishing the exposed surfaces

with cement mortar 1:3 (1 cement : 3 find sand) to give a smooth and even

surface centering and form work and curing complete excluding cost

of reinforcement.

9 Providing and laying controlled cement concrete / Ready Mix

Concrete of M-200 and curing complete, excluding the

cost of form work and reinforcement for reinforced concrete

9.a 1 Foundations, footings, base of columns, and mass concrete. 3977.88 Cu.M.

9.b 0 Walls from top of foundations /level up to floor Two level. 4484.17 Cu.M.

9.c 0 Slabs,landing,shelves,Balconies Lintels, Beams, Girders and 4460.36 Cu.M.

Cantilever upto floor

9.d 0 Columns, pillars, posts, and struts, up to floor two level. 4558.20 Cu.M.

9.e 0 Staircase up to floor two level. (excluding landing) 5418.91 Cu.M.

9.k 0 Vertical and horizontal fins up to floor two level. 4701.97 Cu.M.

Providing and Laying ordinary cement concrete 1:2:4 (1-Cement 6241.78 Cum

2-coarsesand: 4-graded stone aggregates 20 mm nominal size) and

finishing smooth with curing etc. complete including the cost of form

10 0 work but excluding the cost of reinforsement for R.C.C work in (iv)

Slabs having more than

13 cm and upto 15 cm.thickness

Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2- coarse

sand : 4- graded stone aggregates 20 mm nominal size) exposed work with

11 curing etc. complete including the cost of formwork but excluding the cost of

reinforsement for R.C.C

11a 0 (i) Slabs upto 8cm thickness 9447.57 Cum

12 Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine sand)(A) Modular

12.a 22 (A) Conventional 4011.66 Cmt

12.b 1 B) Modular 4345.02 Cmt

Extra Rate for brickwork in Above Item for super structure above

plinth level upto floor two level (B) Conventional

13.a 5 (A) Conventional 272.25 Cmt

13.b 1 B) Modular 262.35 Cmt

13.c 0 C) above floor two level Item No. 2(6.13) (A) Modular 42.66 Per Floor

13.d 0 D) above floor two level Item No. 2(6.13) (B) Conventional 40.09 Per Floor

Providing and laying in position Ready Mixed M250 grade concrete for 4853.56 Cmt

reinforced cement conctere work , using cement content as per

approved Design Mix manufactured in fully automatic batching plant and

transported to site of work in transit mixer for a lead up to 10 kms having

continuous agitated mixer, manufactured as per mix design of specified

grade for reinforced cement concrete work including pumping of R.M.C.

from transit mixer to site of laying, excluding the cost of centering shuttering

14 1 finishing and reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting

of concrete, improve workability without impairing strength and durability as

per direction of the Engineer - in - charge. Without Fly Ash (Min cement

level as per latest IS 456 shall be maintained) (Cement level 450 kg )

Half brick masonry in common brunt clay building bricks having 583.49 Smt

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:5 ( 1-

15 8 Cement : 5 coarse sand ) in foundation

and Plinth conventional brickwork

Extra for half brick masonry in super structure above plinth

level upto floor two level

16.b 0 (B) conventional 52.80 Smt

Providing form work in ordinary timber planking so as to give a rough

finish including centering, shuttering, strutting and propping etc. height

of propping and centering below supporting floor to celling not

17 exceeding 4 M & removal of the same for in situ reinforced or

plain concrete work upto floor four level

17.a 25 Foundation, footings, bases of columns etc. and mass 171.68 Smt

(B) Flat surfaces such as soffits of supspened floors slabs Landings 252.00 Smt

and the like. (1) Floors etc. upto 200 mm in thickness.

(B) Flat surfaces such as soffits of suspended floor roof slabs Landings 270.90 Smt

17.c 1 and the like. (2) Floors etc. above 200mm in thickness.

Vertical surface such as walls (any thickness) partitions and the like including 229.95 Smt

attached buttresses & string course & the like.

(ii) Sides And Soffits Of Beam, Haunchings Cantilevers, Girders, 192.15 Smt

17.e 0 Bressumers And Lintels Not Exceeding 1 M In

17.f 0 (G) Columns PillarsPosts and struts. (1) Square Rectangular 297.68 Smt

Polygonal in plan.

17.g 2 (2) Circular or curved in plan. 422.10 Smt

(H) (2) Sides and soffits of Beams Beam Haunchings canti-levers Girders 259.88 Smt

Bressumers and Lintels exceeding 1M.in Depth.

Providing and fixing 35 mm thick panelled, glazed or panelled

and glazed shutters for Doors windows and clear story windows including

18 anodised alluminium But hinges with necessary screws and indian

teak wood shutters with.

a 1 (A) Plywood sheet panels. 3459.09 Smt

b 0 (B) Particle board panels 3464.51 Smt

c 1 (C)Hard board panels. 3433.65 Smt

d 1 (D) Asbestos sheet panels. 3406.53 Smt

19 2 Providing and fixing 25 mm thick shutters for cup boards etc. 3006.75 Smt

including black enamelled M.S. butt hinges with

necessary screws.(A) Indian teak wood. (i) Fully Panelled.

Providing and fixing 25 mm thick shutters for cupboards etc. including 3006.75 Smt

a 1 anodised alluminiu butt hinges with necessary screws.

(A) Indian teak wood. (ii) Fully Glazed.

b 3 Providing and fixing 25 mm thick shutters for cupboards etc. including 2814.42 Smt

anodised alluminiu butt hinges with necessary screws.

(A) Indian teak wood. (ii) Partly panelled and partl glazed.

1 Providing and fixing glazed louvered glass windows and 4102.54 Smt

20 ventilators with teak wood frame 10 cm. x 7 cm. size including 3 coats

of oil painting to wood work etc.complete.

Providing and fixing glazed louvered glass windows and 4332.47 Smt

ventilators with teak wood frame 10 cm.x7 cm. size including

21 1 coats of oil painting to wood work etc.complete.with wooden

louvers plank 12mm thick

Providing and fixing 35 mm thick shutters for Doors, windows 4595.06 Smt

and clere story windows including Indian teak wood frames 10 cm

x 7 cm. size including anodized alluminium fixtures and

22 1 fastenings including primer coat of approved quality and two coats of

oil painting etc, complete.(ii)

Providing and fixing 35 mm thick shutters for Doors, windows 5285.45 Smt

and clere story windows including Indian teak wood frames 10 cm x

7 cm. size including black enamelled iron

23 2 oxidixed fixtures and fastenings including primer coat of approved

quality and two coats of oil painting etc, complete.(ii)

Fully Panelled.

Providing and fixing 35 mm thick shutters for Doors, windows and clerestory 4940.25 Smt

windows including Indian teak wood frames 10 cm x 7 cm. size including

anodized alluminium fixtures and fastenings including primer coat of

a 2 approved quality and two coats of oil painting etc, complete. (iii) Partly

panelled and partly glazed.

Providing and fixing 30 mm thick FACTORY MADE SOLID PANEL PVC 1135.02 Smt

DOOR SHUTTER consisting of frame made out of M.S.tubes of 19 gauge

thickness and size of 19 mm x 19 mm for stiles and 15 mm x 15 mm for top

and bottom rails.M.S. frames hall have a coat of steel primers of

approved make and manufacture, M.S. frames hall be covered with

mm thick heat moulded PVC ‘C’ channel of size 30 x 50 mm formings

tiles, and 5 mm thick 75 mm wide PVC sheets for to prail, lock rail and

bottom rail on either side, and 10 mm (5 mm x 2) thick,

20 mm wide cross PVC sheet as gap insert for top rail and bottom

rail, Panelling of 5 stiles and rails with 30 mm wide x 5 mm thick PVC

sheet beading on eighter side, and joined together with

solventcement adhesive,. An additional 5 mm thick PVC strip of

mm width is to be stculkon the interiors side of the ‘c’ channel using

PVC solvent cement adhesive etc. complete as per

direction of Engineer incharge, manufacture’s specification and

Providing and fixing in position collapsible steel shutters with vertical 5391.23 Sq.M.

channels 20 x 10 x 2 mm braced with flat iron diagonal 20 x 5 mm size

with top and bottom rails T iron 40 x 40 x 6 mm with 38 mm dia steel pulleys

25 2 complete with bolts, nuts,

locking arrangements, stoppers, handles, including a priming

coat of red lead paint & approved make.

Providing and fixing 1 mm thick M.S. sheet sliding shutters with frame 3652.12 Sqm

and diagonal braces of 40x40x6 mm angle iron, 3.15 mm

M.S.gusset plates at Junctions and corners 25 mm dia. pulley,

26 5 40x40x6 mm angle and T-iron guide rail at top and bottom

respactively with handles, stoppers and locking agangement etc,

including applying a priming coat of red lead paint.

Providing & Fixing in position Alluminium doors with frame using 2900.00 Smt

approved quality anodised extruded alluminium section as

approved by Engg.in charge(Jindal alluminium) (a) Frame

sections 101.6x44.45 mm (b) Shutter bottom vertical & top section

83.5x44.45 (wt.1.31 kg/mt.)(at 1.31 kg/mt) (c) Shutter bottom

section at 114.3x44.45 mm at (1.37kg/mt) Shutter middle section

at 100x44.3 wt.(1.37 kg/mt) incl.providing & installing 5 mm thick

approved color Acrylic sheet of standard quality fixed with glazing

chips on upper pannel & Laminated sheet on lower

pannel (wtt.0.13 kg/Rmt) etc.comp.as direction of engg.in charge.(N.S.)

Providing and fixing extruded aluminum window having extruded aluminum 2119.14 Sq. M.

Colour r Powder Coated section frame main outer size 127mm x 38.10mm x

1.35mm ,@ Wt.1.384 Kg/mt,horizontal Four track member size 122.20mm x

31.75mm x 1.10mm @ Wt. 1.205 Kg/mt,vertical member of size 122.20mm x

,@ Wt. 1.398 Kg/mt with sliding shutters of horizontal member size

28 3 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,vertical member of size

40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,@ with 5 mm thick transparent

bronze colour tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as per details

etc complete for window.

Providing & Fixing in position Alluminium vents with frame using 1950.00 Sq. M.

approved anodised extruded alluminium section as approved by

Engg. In charge.(Jindal alluminium) units equivalent

Approved Rate)Frame section of 63.50 x

29 2 38.50 mm. (wt. 0.68Kg/Rmt) incl. Providing & Installing 5 mmthick

approved color Acrylic sheet of standard quality etc. comp.

Providing and fixing standared extruded of alluminium section of 1163.92 Sq. M.

size 63 mmx38.10 mmx1.2 mm (Jindal Section:2434, or

30 1 equivalent @ Wt.0.643 Kg/mt) with colour

anodized alluminium frame for ventilation with 5 mm thick frosted glass

as details etc complete for Ventilation

Providing and fixing standared extruded of alluminium section of size 63.50 x 2141.88 Sq.M.

38.10 x 1.95 mm,@ Wt 1.094Kg / Rmt with colour Powder Coated

alluminium frame with 5 mm thick transparent bronze colour tinted float

31 2 glass as details etc complete for Fix

Providing and laying 40 mm thick marble chips flooring rubbed and 811.13 Sqm

polished (I.E.terrazo) to granolithic finish with under layer 30 mm thick

cement concrete1:2:4 (1-Cement: 2-coarse sand: 4-graded stone

aggregate 10 mm and down gauge) and to player 10 mm thick with

white, black or white and blak marble cihps of required sizes from 1 mm to

32 1 mm nominal size laid in cement marble powder mix 3:1 (3- Cement:1-Marble

powder by weight) in proportion of 4:7 (4- Cement: 7-marble

chips by volume) (C) Medium Shade pigment with approx 50%

white cement and 50% ordinary cement (In top layer only) (upto 10 ton)

Providing and laying marble chips skirting (Terrazo) or dedo rubbed, and 869.40 Sqm

polished to Granolithic finish to player 6 mm white, black or white and

black marble chips of size from smallest to 4 mm nominal size laid

in cement marble powder mix 3:1 (3-Cement: 1 marble powder

33 0 by weight) in proportion of 4:7 (4-cement marble powder mix: 7-marble

chips by volume) (B) Light shade pigment with white cement (In top layer

15 Providing and laying white glazed tiles 6mm thick in flooring treads of steps 908.17 Sq.M.

34 and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-

coarse sand ) finishing with flush

12 Providing and laying Ceramic tiles 6 mm thick in flooring treads of 960.47 Sq.M.

steps and landing laid on a bed of 12 mm thick cement mortar 1:3 (1-

35 cement :3-coarses and) finishing with flush

pointing in white cement.

Providing & Fixing 20 mm thick Mirror Polished Decorative Granite 4304.00 No.

Board with Computerised Golden Letters Discription as per

36 1 instructions of engg. in charge to M.S. frame structure for

Inaugaration & Public Handover Function

Providing and laying Vitrified tiles 8 to 10 mm thick, 36''x36'' in flooring 1469.91 Sq.M.

treads of steps and landing laid on a bed of 12 mm thick cement mortar

37 5 1:3 (1-cement:3-coarses and) finishing with flush pointing inwhite cement.

15 Providing and laying Vitrified tiles 8 to 10 mm thick, 24''x24'' in skrting 1130.15 Sqm

risers of steps and dedo on 10 mm thick cement plaster 1:3 (1-

38 cement: 3-coarse sand) and jointed

with white cement slurry

2 Providing and laying Vitrified tiles 8 to 10 mm thick, in skrting risers of 1523.61 Sqm

steps and dedo on 10 mm thick cement plaster 1:3 (1-cement:3-

39 coarse sand) and jointed with white cement

5 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring 1062.50 Sq. M.

treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3

40 (1- cement : 3-coarse sand ) finishing with

flush pointing in white cement.

Providing and laying 24" x 24" vitrified 8 to 10 mm th.Double 165.00 Rmt

Charged Gloosy / Matt tiles of Approved make as Approved by

Adl.C.E. / Consultants for upto 10 cm high skirting as approved by

41 5 Engineer in charge over 10 mm thick cement mortar 1:6 (1 cement :

coarse sand)on new surface& jointed with colour cement slurry incl

with flush pointing & cleaning the surface etc. comp.

Providing and laying polished Kota stone slab flooring over 20 mm 982.83 Sq.M.

(Average) thick base of cement mortar 1:6 (1-cement:6-

coarses and) or L.M.1.1.5 (1-Lime putty:1.5-coarses and)

42 5 laid over and jointed with grey cement slurry mixed with pigment to

match the shade of slab including rubbing and polishing etc. complete.

(A) 25 mm thick

Providing and laying marble stone slab flooring over 20mm (average)base of 2194.63 Sq.M.

cement mortar 1:6 (1-cement : 6 coarse sand) or L.M. 1:1.5(1- lime putty :

43 2 - coarse sand) laid and jointed with gray cement slurry including rubbing and

polishing complete.

(A) Marble slab 25mm thick

Providing and laying polished Kota stone slab flooring over 20 mm 1085.48 Sq.M.

(Average) thick base of cement mortar 1:6 (1-cement:6-

44 5 coarses and) or L.M.1.1.5 laid over and jointed with grey cement

slurry including rubbing and polishing etc.complete. (B) 30 mm

Providing and laying polished kota stone slab 25 mm thick in risers of 1176.03 Sq.M.

steps, skirting Dedo and pillars laid on 10 mm thick cement mortar 1:3

(1-Cement :3 coarses and) and jointed with gray cement slury

45 2 mixed with pigment to match the shade of slab including rubbing

and polishing etc.complete.

Providing and laying cement concrete flooring 1:2:4 (1-cement: 297.68 Sq.M.

2-coarses and:4-graded stone aggregate 20mm nominal size) laid

46 5 in one layer and finished with a floating coat of neat cement. (A)

Providing and laying cement concrete flooring 1:2:4 (1-cement: 348.08 Sq.M.

2-coarse sand:4-graded stone aggregate 20mm nominal size) laid

47 2 in one layer and finished with a floating coat of neat cement. (B)

Providing and laying broken china mosaic flooring for terrace using 12 739.89 Sqm

mm to 20 mm broken pieces of glazed tiles to be laid over cement mortar

1:3 to plain or slope and to be tempered to bring mortar creme out upto

48 38 surface using white cement including rounding off junctions and

extending them up to15 cm along the wall, clearing with water and

oxalic acid etc.as directed.

Providing and laying coloured glazed tiles of the size 1426.95 Sqm

300 mmx200 mmx8 mm/300 mmx450 mmx8 mm in skirting, risers

49 1 of steps and dedo on 10 mm. thick cement plaster 1:3 (1cement:

coarse sand) & jointed with white cement slurry.

15 Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron 719.93 Sqm

J or L Hooks, Bolts and nuts 8mm diameter with bitumen and G.I. limpet

50 washer or G.I. limpet washer. filled with white lead complete excluding the

cost of purlins, Rafters and Trusses.(1) 0.80 mm thick sheet

Providing and fixing 150 mm wide 450 mm over all semi circular plain 555.71 Sqm

G.I.sheet class-3 gutter with Iron brackets 40 mmx3 mm size Bolts, Nuts,

51 1 washers etc. including making necessary connection with rain water

pipes. (i) 0.80 mm thick Sheet.

Providing and fixing five courses water profing treatment with bitumen 466.84 Sqm

felt consisting of second and fourth course of blown/ bitumen

or/and residual bitumen applied hot at

1.2 kg.per Sq.M.of area for each course and first course with fibre

base bitunen saturated under lay type land third course with fibre base

52 1 self finished felt type 2 grade 1 and fifth and final course of stone grit

mm and down size or pea sizes gravel spread at

Cu.Metre/Sq.metre preparation of surface excluding grading complete.

1 Providing and fixing on wall face C.I. Rain water pipe including filling the 283.62 Rmt

joints with spun yarn soaked in neat cement slurry and cement mortar

53 1:2(1- Cement : 2-fine sand) (A)

Providing 15 mm thick cement plaster in single coat on Rough 174.83 Sqm

(Similar) side of single or half brick walls for interior plastering up to

54 45 floor two level and finished even and smooth in (i) Cement mortar 1:3 (1-

cement :3-sand)

Providing 20 mm thick sand faced cement plaster on walls upto height 10 297.68 Sqm

metres above ground level consisting of 12mm thick backing coat of

55 25 C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-

cement : 1-sand) etc. complete.

Colour washing with lime on wall surface (two coats) over and 12.29 Sqm

including a primary coat of white washing to give an

56 20 even shade after through brooming the surface to remove all dirt, dust,

mortar drops and other foreigh matter.

5 Removing dry or oil bound distemper by a washing 11.19 Sqm

57 and scraping and sand papering the wall surface smooth including

necessary repairs to scratches complete.

Distempering with dry distemper of approved brand and 46.94 Sqm

manufacture (two coats) and of required shade on wall surfaces of

58 200 given an even shade, over and including a priming coat of

whiting after thoroughly brooming the surface free from mortar

dropping and other foreign matter.

Distempeing (Two coats) with oil bound distemper of approved 76.08 Sqm

brand and manufacture and of required shade on wall surfaces to give

an even shade, over and including a

priming coat with distemper primer of approved brand and

59 100 manufacture after thoroughly brushing the surface

free from mortar dropping and other foreign matter and also

including preparing the surface even and sand papered

Extra Coat for Above Item over above for every 30.09 Sqm

subsequent coat of approved brand and manufacture.

Wall painting (two coats) with plastic emulsion paint of approved 78.44 Sqm

brand and manufacture on undecorated wall surface to give an

61 50 even shade including throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth.

28 Extra over item for every sub sequent coat of wall painting 33.39 Sqm

with plastic emulsion paint of approved brand

Applying priming coat over new steel and other metel surface after 34.34 Sqm

and including preparing the surface by throughly cleaning, oil,

63 75 grease, dirt and other foreign matter and scoured with brushes

fine steel wood, scrapers and sand paper with ready mixed priming paint

brushing red lead.

Painting two coats (excluding priming coat) on new steel and other 86.94 Sqm

metal surface with enamel paint, brushing, interior to give an even

shade including cleaning the surface an even shade including cleaning

64 30 the surface of all dirt, dust and other

foreign matter.

Painting one coats (excluding priming coat) on previously painted 54.35 Sqm

steel and other metal surface with enamel paint, brushing to give

65 60 an even shade including cleaning the surface of all dirt, dust and other

foreign matter.

66 20 Extra over item for every sub sequent coat of paint. 50.40 Sqm

Painting two coats (excluding priming coat) on new steel and other 64.66 Sqm

metal surface with synthetic enamel paint, brushing to give an

67 10 even shade including cleaning the surfaceofalldirt,dust and other

foreign matter.

Painting one coats (excluding priming coat) on previously printed 43.79 Sqm

steel and other metal surface with synthetic enamel paint, brushing to give

68 10 an even shade including cleaning the surface of all dirt, dust and

other foreign matter.

69 5 Extra over Above item for every sub sequent coat of paint. 43.47 Sqm

Painting two coats (excluding priming coat) on external surface 20.16 Sqm

of new rain water, soil, waste and vent pipes and fittings with ready

70 5 mixed bituminous brushing, black, anti corrosive to give an even

shade including cleaning of all dirt, dustand other foreign matter.(75 mm dia)

Painting two coats (excluding priming coat) on external surface 25.05 Sqm

of new rain water, soil, waste and vent pipes and fittings with ready

71 5 mixed bituminous brushing, black, anti corrosive to give an even

shade including cleaning of all dirt, dust and other foreign matter.(100 mm dia)

Painting two coats (excluding priming coat) on new wood and wood 26.78 Sqm

based surface with enamel paint, interior to give an even shade

72 2 including cleaning the surface of all dirt, dust and other foreign

matter sand papering and stopping. (a) Ready mixed paint brushing wood

Painting one coats (excluding priming coat) on previously painted 26.78 Sqm

wood and wood based surface with enamel paint, to give an even

shade including cleaning the of all dirt, dust and other foreign

73 10 matter.(b) Ready mixed paintbrushing priming for

74 5 Extra over Above item for every sub sequent coat of paint. 24.26 Sqm

Painting two coats (excluding priming coat) on new wood and wood 104.12 Sqm

based surface with ready mixed paint, brushing, oil, gloss, semi gloss to

75 10 give and even shade including cleaning of all dust, dirt and other foreign

matters and papering and

Finishing wall with weather proof exterior emulsion paint on wall 113.40 Sqm

surface (two coats) to give an required shape even shade after

76 100 thoroughly brushing the surface to remove all dirt, and remains of loose

powdered materials.etc complete

Applying two coats of Birla (white cement based) or Asian 40.19 Sqm

(acryliclapy-putty) or equivalent & two coats of primer of approved brand

and manufacture on new wall surface to give an even shade including

77 35 thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth.

Painting one coats (excluding priming coat) on previously painted wood and 55.13 Sq.M.

wood based surface with enamel paint, to give an even shade including

cleaning the of all dirt, dust and other foreign matter.

50 Writing letter or figures on any surface with black japan paint 3.15 per letter

(stops, comas, hyphens and the like not to be measured and per

79 paid for separately) (i) Block Cm/Ht

(Letters/Figures) (Per 10 Letter pet CM.HT)

Demolition including stacking of serviceable materilas and disposal of 1047.38 Cu.M.

80 5 unserviceable materials with all lead and lift. (i)

7 Demolition of Brick work and stone masonry including stacking of 544.95 Cu.M.

81 serviceable materil as and disposalof unserviceable materials with all lead

and lift.(ii) In Cement Mortar.

Dismentaling tiled of stone floors laid in mortar including stacking of 47.25 Sqm

82 25 serviceable materil as and disposal of unserviceable

materials with all lead and lift.

1 Dismentaling of sheet roofing including ridges, Hips, Valleys, 47.25 Sqm

Gutters etc. stacking of serviceable materil as and disposal of

83 unserviceable materials with all lead and lift.(i)

G.I.sheet roofing.

30 Dismentling steel work including distempering and 2.42 Kg.

stacking the materials with all lead and lift.

Dismentling doors, windows, ventilators etc. (wood or steel) 185.85 Each

shutters including chowkhats architraves, hold fasts and other

85 10 attachment etc. complete and stacking the material within all lead

and lift.(i) Not exceeding 3 Sq.M. in area.

Dismentling doors, windows, ventilators etc. (wood or steel) 248.85 Each

shutters including chowkhats architraves,hold fasts and other

86 8 attachment etc. complete and stacking the material with in all

lead and lift.(ii) Exceeding 3 Sq.M.in area.

Dismentling barbed wire in fencing including making rolls and also 66.15 Rmt

including dismentling fencing posts including all earth work concrete in base

and making good the disturbed ground stacking useful materials

87 30 as directed and disposing

as directed and disposing of the unserviceable materials

with all lead and lift.

Dismentling C.I. pipes G.S.W. pipes abd A.C. rain water pipes with 74.03 Rmt

88 20 fittings and clamps including stacking the materials

with all lead and lift (for any dia, of pipe)

Dismantling santtary fittings like wash basin . W.C. pan Indian and 401.63 Each

89 5 Europe an type, flushing tank etc. including stacking the

materials with all lead and lift

Scraping oil paint from steel and other metal surface and making 48.83 Smt

the surface even (with Hand Scraping.)

Removing and scraping of old deteriorated plaster of any 19.38 Smt

thickness from wall / R.C.C member including

91 3.00 stacking of serviceable material and disposal of unserviceable

from site of work with all lead and lift

Providing and fixing M.S. fan clamps of shape and size as 168.53 Each

92 2 specified in existing R.C.C. slab including cutting

chase and making good.

Cutting out cracks of roof terrace to V-section, cleaning out, wetting, 64.58 Rmt

grouting with cement and sand slurry 1:3 (1-cement

Cutting out cracks roof terrace to V-Section cleaning out and 75.29 Rmt

94 1 filling solidly with a hot mixture of bitumen and clean dry sand

(1:1 by weight)

Providing & Fixing in position Alluminium doors with frame using 2900.00 Sq. M.

approved quality anodised extruded alluminium section as

approved by Engg.in charge(Jindal alluminium)(a) Frame sections

101.6x44.45 mm (b) Shutter bottom vertical & top section

83.5x44.45 (wt.1.31 kg/mt.)(at 1.31 kg/mt) (c) Shutter bottom section at

95 2 114.3x44.45 mm at (1.37 kg/mt) Shutter middle section at 100x44.3

wt.(1.37 kg/mt) incl.providing & installing 5 mm thick approved

color Acrylic sheet of standard quality fixed with glazing chips on upper

pannel & Laminated sheet on lower pannel (wtt.0.13 kg/Rmt)

etc.comp.as direction of engg.in charge.(N.S.)

Providing & Fixing in position Fully Panelled / Partly Panelled Partly Glazed 4583.00 Sq.M.

/ Fully Glazed Alluminium doors with frame using approved quality

anodised extruded alluminium section as approved by Engg. In

charge.(Jindal alluminium )(a) Frame sections 101.6x44.45 mm b)

Shutter vertical & top section 83.5x44.45 (wt. 1.31 kg/mt.)( at

1.31 kg/mt) © Shutter bottom section at 114.3 x44.45mm at ( 1.37 kg/mt )

96 0 Shutter middle section at 100x44.3 wt. (1.37 kg/mt ) incl. providing &

installing 5 mm thick Glass of standaed quality fixed / 12 mm thick

Laminated sheet with glazing chips (wt. 0.13 kg/ Rmt) in panels etc.

comp. as per Detail Given & direction of engg.in charge.

Providing & Fixing in position Alluminium window 2/3/4 track 4518.00 Sq. M.

sliding / fix type with frame using approved

anodised extruded alluminium section as approved by Engg.

97 1 In charge.(Jindal alluminium) units equivalent. including P/F

installing 5 mm thick clear/tinted Glass of standard quality etc.comp.

Providing & Fixing in position Alluminium vents with frame using 4218.00 Sq. M.

approved anodised extruded alluminium section as approved by

Engg. In charge.(Jindal alluminium) units equivalent Frame

98 1 section of 63.50 x 38.50 mm. (wt.0.68 Kg/Rmt) incl. Providing &

Installing 5 mm thick Glass of standard quality etc. comp.

Providing and fixing of Ridge flashing for roof panel shall be 510.10 Sqm

made out of 0.5 mm thick pre coated GI sheet. The Pre

coatedsheet shall be of minimum 240 mpa steel grade confirming to

IS 14246:1995 and shall have zinc coating of minimum 120 gsm

as per IS:277:1992, 5-7 microns epoxy primer on both side of the

sheet and polyester top coat 15-18 micron. The PP GI Sheet shall

99 2 have plastic protective guard film of minimum 25 microns to

avoid scratches during transportation. The ridge shall be fixed to the steel

members by poprivetor self drilling/self stitching fastners @

maximum 450mm c/c along length of capping/flashing etc complete .

Supplying and fixing vinyl flooring over the surface having 1- 963.00 Smt

100 1 2 mm thickness as per directed by engineer incharge etc as

completed (N.S.)

Providing and laying 15mm bamboza wooden flooring as per 2690.00 Smt

architect's drawing with all necessary details as directed by the

101 0 project consultants. Use underlay for better result as per Detail

specifications and directed by the project consultants. (N.S.) Approved

Providing and fixing 1.20 Metre high fencing with 2.0 Metre long 385.40 Rmt

M.S. Angle posts 40 mm x 40 mm x 6 mm and oil painting 3 coats fixed

at 2.5 Mt, C/c. with five Horizontan lines and two diagonals of

102 2 galvanised steel barbed wire weighting 9.38 Kg. per 100 Metre, strained

and fixed to posts with G.I, staples including fixing the posts in ground

with 0.5 M x 0.5.M x 0.5 M. block in C.C 1:5:10 etc complete.

15 Renovation and Repairing work in Chainlink fencing any size and 735.00 Rmt.

also refixing work incl. febrication work with all materails to be

103 painted one coat of primer and twocoats of

paint as directed inline and level. (N.S.)

Constructing a sink (chowkedi) with C.C. 1:2:4, 12 cm. thick over 2235.66 Rmt

B.B. masonry in C.M, (1:6) in front and dwarf wall 1.0 Mt. high and 23 cm.

104 1 thick cement plaster to masonry / in C.M.1:3) and cement concrete

flooring in 1:2:4: mix

5cm.dia.drain pipe etc.complete.

Constructing a cooking platform 60 cm. width and 70 cm high resting on 933.98 Rmt

B.B. Masonry walls 23 cm. thick in C.M. (1:6) with

105 2 (i) Fixing or precast R.C.C. 1:2:4) 8 cm. thick slab with marble

chips set in C.M. (1:6) (6 mm thick terrazo) with plastering on

exposed faces walls in C.M. (1:4) etc complete.

Extra rate for using Ready Mix Concrete of any grade for below 760.00 Cmt

ground level to vertical upto any floor with delivery & suction Pipe &

106 2 Pump etc. The rate includes fule, pump operator, skilled labor, driver

etc completed and as per direction

of engineer in charge

P/A Tremix with dewartering machine and floater machine 54.00 Sq.M.

on constructed CC work for finishing the surface as

107 5 per requirement. The rate including all machinaries, labor, loading,

unloading, transportaion etc complete as per direction given by

engineer incharge.

Carrying out timber treatment to all wood work including drilling holes 54.98 Smt

and spraying oil based chemical solution on surface of timber work for

termite control including labor and material etc. complete. Using

Chlorpyriphos20 EC as per 6313 2013 Part III (1% concentration by

mass) is recommended one litre chemical emulsion diluted with 19 liters

108 8 of kerosene. Total diluted concentration will be 20 liters inclusive

of 1 liter chemical emulsion application in drilled holes and 0.75 / Litre

chemical per one Sqmt two coat on wood surface not protected by

Applying general insecticide pest control treatment to floors, cupboards 88.40 Smt

etc including labour materials etc. complete. Using Imidacloprid

SCas Per IS 6313 part -II( (0.075% concentration by mass) is

109 5 recommended 10.5ml chemical diluted with 5 liters of water application

litre chemical /Sqm of surface

is recommended as per I.S.

Carring out plinth treatment to post construction / existing structure 104.90 Smt

by spraying chemical solution for termite control treatment including

labour and material consist ment with

I.S. specification. Using Chlordene and Chior purfiles 20 EC. As

110 5 Per 6131_paret-II Consentration Weight on percentis

recommended i.e one litre 20 EC chemical emulsion with

liter give 1% concrentration inclusive of one

litre chemical emulsion appication attherate of 5 Litre chemical /

Sqm of surface is recommended as per I.S

Carrying out wall treatment for termite control including spraying with 37.34 Smt

chemical solution in oil base including labour and material Using

Chlorpyriphos 20 ECAs per IS 6313 part - II (1% concentration by

mass) is recommended i.e one litre chemical emulsion diluted with

111 2 liter oil base. Total solution will be 20 liters inclusive of one liter

chemical emulsion application at the rate of 7.5 litre chemical / Sqm of

surface is recommended as per

2000 Providing erecting and fixing double coated Syntex or 3.91 Litre

equivalent PVC.(ISI) water tank of required capacity each with all

112 necessary fittings and connection etc. complete

Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes

(Medium grade) of the following nominal bore, tube fitting and clamps

113 including making good the wall ceiling and

114 Providing and laying in trenches galvanised mild steel tubes (Midium

grade) of the following nominal bore, and tube fitting (Earth work

in trenches to be measured and

paid for separately)

115 2 Making connection of galvanised Mild steel distribution branch with 600.08 Each

galvanised mild steel main 50 mm to 80 mm nominal bore by

providing and fixing tee including cutting and

threading the pipes complete.

Providing and fixing to wall ceiling and floor 6.0 Kg.F/Cm2 working

pressure poluthene pipes of the following out side Dia. Low

densidy, complete with special falnge compression type

116 fittings,wall clips etc.including making

good the wall ceiling and floor.

Providing and fixing to wall ceiling and floor 10.0Kg.F/Cm2 working

pressure polythene pipes of the following out side

117 Dia. Low densidy, complete with special falnge compression

type fittings, wall clips etc. including making good the wall ceiling and

Providing and fixing cast iron (Spun) Nahni trap of the following 600.08 Each

nominal diameter of self cleaning design with C.I. screaed down or

higned grating including cost of cutting and making good the walls

118 3 and floor 100 mm inlet and 50 mm

outlet.(C)100mm dia.

Providing and fixing water closet squatting Pan (Indian type 926.10 Each

W.C.Pan) size 580 mm (Earth work, bed concrete, foot rest and

119 3 trap to be measured and paid for separately)

(A) Vitreous China. (I)Long pattern = White colour

Provdg. & fixing wall mounted White / Color Vitreous China 4250.00 No.

European water closet with integral P trap of "Cera" - Clair

120 1 Series or equivalent incl. seat cover , Chair Bracket etc. complete as per

direction of engg. In charge.(N.S.)

3 Provdg. & Fixing Flat Back Large Urinal of White/ colour of "Cera" or " 1850.00 No.

Hindware" incl. C.P. Brass waste coupline , waste pipe,

121 pvcconnection etc. Complete.( size 635 x395x420

Providing & Fixing Angle cock of " Ess Ess" - Trend series or 675.00 No.

122 5 equivalent standard make as approved by engg. in

charge all complete. (N.S.)

3 Providing and fixing 100 mm size P or S trap for water closet 311.85 Each

squatting pan including jointing the trap with the pan and soil pipe in

123 cement Mortar1:1 (1-Cement : 1-Fine sand)(A)

Vitreous China.

5 Providing and fixing 600 mm x 450 mm bevelled edge mirrror of 825.48 Each

superior glass mounted on 6 mm thick A.C. sheet or ply wood sheet and

124 fixing to wooden pluge with C.P. brass

screws and washers.

Providing and fixing chromium plated brass halftrun flush cock of approved

quality including fixing in pipe line etc. complete.

Provdg. & fixing White / Color Vitreous china Counter wash basin with 2950.00 No.

signle hole for pillar tap of "Cera " - Concord series of 550 x425

mm size to be fiited in stone counter with necessary brackets painted

white incl. cutting holes and making good the same .Cost

126 2 Includes P/F C.P. brass waste coupline, 32 mm dia fisher union

mm dia. Pillar cock & Angle cock of " Ess Ess"- Trend series

mm dia. Waste pipe etc. complete as per dir. of engg. in charge.

Providing & Fixing S.S.304 Grade Sink of Nirali / 4650.00 No.

127 2 Krishna or Equivalent Make for Kitchen Platform of size :

24":x18" as per Direction of engg. In charge

Providing and fixing C.P. brass towel rail comlete with 597.22 Each

128 2 C.P.brass brackets fixed to wooden plugs with C.P. brass scews.(B)

600mm x 20mm size.

Providing and fixing 600 mmx120 mm glass shelf with C.P. 561.03 Each

129 1 brass bracket and guard rail complete mixed to wooden plug with

C.P.brass screws.

130 1 Providing and fixing toilet paper holder. (A) C.P.Brass 414.53 Each

Providing and fixing screw down bib taps of following size. (A)

Brass screw down bib tap polished bright.

12 (i) 15mm dia. 184.98 Each

5 (ii) 20mm dia. 212.68 Each

132 Providing and fixing screw down bib taps of following size. (B)

Brass chromium plated screws down Bib Tap.

0 (i) 15mm dia. 184.98 Each

0 (ii) 20mm dia. 212.68 Each

133 Providing and fixing screw down bib taps of following size. ©

Gun metal screw down bib tap.

2 (i) 15mm dia. 157.29 Each

1 (ii) 20mm dia. 176.09 Each

134 Providing and fixing pillar tap, capstan head, screw down

high pressure with screws, shanks and back nuts.

1 (i) 15mm dia. 305.67 Each

1 (ii) 20mm dia. 351.18 Each

135 Providing and fixing Gun metal check or non-return fullway

3 (i) 15mm dia. 184.98 Each

2 (ii) 20mm dia. 201.80 Each

2 (III) 25 MM DIA 416.47 Each

1 (E) 40mm dia 656.86 Each

Providing and fixing chromium plated brass half trun flush cock of

140 approved quality including fixing in pipe line etc. complete.

2 (i) 20mm dia. 252.26 Each

2 (ii) 25mm dia. 261.16 Each

1 (iii) 32mm dia. 273.03 Each

141 Providing and fixing chromium plated, bottle trap with necessary 292.87 Each

couplings of approved quality for wash basin.

142 2 Providing and fixing ball cock ofapproved quality as directed. 131.57 Each

(A) Copper Metal (i) 25mm dia.

143 2 Providing and fixing ball cock of approved quality as 101.89 Each

directed. (B)Abonite (i) 25mm dia.

144 Filling with good Quality thor as and where directed by the 3850.00 Cmt

Architect / Engineer-in-charge, in sunk in layers of 15 cm. thickness,

including watering, ramming well etc. complete, as directed by the

Architect / Engineer-in-charge .

145 Providing laying and jointing in true line and level 15 mm dia. 71.93 Rmt

U.P.V.C. Pipe (SCH-40) for cold water including fittings make

PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as approved

by Engineer In Charge. Pipe shall be fixed on the wall with the help of

40 clamp at every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with solvent, including cost of all materials.adhesive

146 Providing laying and jointing in true line and level 25 mm dia. 90.93 Rmt

U.P.V.C. Pipe (SCH-40) for cold water including fittings make

PRINCE/ SUPREME/ ASTRAL/ FINOLEX orequivalent as approved by

Engineer In Charge. Pipe shall be fixed on

15 the wall with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent, including cost

of all materials.

147 Providing laying and jointing in true line and level 32 mm dia. 117.97 Rmt

U.P.V.C. Pipe (SCH-40) for cold water including fittings make

PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as approved

by Engineer In Charge. Pipe shall be fixed on the wall with the help of

10 clamp at every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

148 Providing laying and jointing in true line and level 40 mm dia. 146.65 Rmt

U.P.V.C. Pipe (SCH-40) for cold water including fittings make

PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as approved

by Engineer In Charge. Pipe shall be fixed on the wall with the help of

20 clamp at every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 50 mm dia. 193.73 Rmt

U.P.V.C. Pipe (SCH-40) for cold water including fittings make

PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as approved

by Engineer In Charge. Pipe shall be fixed on the wall with the help of

151 5 clamp at every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

Providing in line level plumb, fabricating and fixing three row 390.00 Rmt

horizontal barbed wire fencing and punched tape concertina coil of

turns per meter of 610 mm dia fixed with clips on top of the angle iron

posts. The punched tape concertina coil having sharp barbs at

every 25 mm spacing shall be 0.5 mm thick and 19 mm width and

weighting 13 kg/100 mt. (Average) as per manufacture's specification.

152 8 The rate shall also include providing and fixing 1.20 mt.total

long MS angle 40 x 40 x 6 mm @3.00 mt.c/c spacing embaded in RCC

column, angle posts shall be painted with one coats of red oxide and two

coats of enamel paint of approved quality at top compound wall.

10 Fixing sun film for protection sunlight in black or any colour as as 850.00 Smt

directd by engineer In Charge.(Market rate)

Providing & Fixing 3 mm thick F.R.P.sheet of Approved Quality & 1930.00 SqM

Color / Pattern as per Consultant's design also includes required

fabrication structure in the grid of 2'-0x2'-0 size using hollow pipe of16

gauge & size 2"x1" & 1"x1" ,G.I. & Bitumen Washers, Silicon paste

154 75 application for fixing the sheet . Rate also includesnecessary bending,

cutting, labor charges , Zinc Primer coat & Two coats of oil painting of

color as approved by consultants & making good the wall. (N.S.)

2 Providing 2 mm thick F.R.P. Gutter with necessary M.S. 400.00 Rmt

Supporting Brackets. (N.S.)

Hiring charges for J.C.B.machine inclduing cost of fuel, operator, 600.00 Hrs.

dirver etc.. ( 12 hours sift day/night) (N.S.)

To provide tractor with hydraulic trolley, driver, 4 Nos. of Labor with all 1661.02 No.

tools like bucket drum, showels, trikam, pavadas,

etc,, to carryout different works during monsoon for 12 Hrs. Shift. Work

157 1 shall be carried out as per the instrucitons of Engineer In-Charge.No

extra charged shall be paid for night

Roller Blind Providing and fixing Roller Blind curtain fixed on window 3285.00 Smt

level on wooden batten and curtain lift with cotton thin rope, make

of aerolax or equivalent design and colour as per instruction by

158 3 engineer – in – Charge with necessary hardware fitting, material

2 Providing & Fixing Door closer - Door closers (Heavy type of 765 474.58 No.

number) Hardwire or Everite Prabhat or Equivalent

5 Providing and fixiing M.S. Fan clamps type 1 of 16 mm dia M.S. bar bent to 124.74 No.

shape with hooked ends of R.C.C. slabs during laying incl. painting the

160 exposed protion of loops, all as per standard

design complete.

Providing cement vata (10cm. x 10 cm. size) quarter round in cement 23.45 Rmt

161 45 mortar 1:1 including neat cement finishing, watering etc.

162 2 Making Water connection from exi.Muni. Water line (N.S.) 250.00 No.

Providing and applying fibere reinforced cementitious micro 530.00 Smt

concrete work in cellings and beams incl.mixture of

CEMSCREED HM (F) fair mate company material, FBR

bonding agent material with water in suItable proportion anti

163 1 corrosive treatment on exposed beam,celling steel bars with safeCore R

incl.all kind of labour etc.comp.including three coat of white

wash.(Approved Rate)

2 Providing and Fixing 1 H.P. Electrical monoblock or submarcible water 6800.00 Set

164 pumps withmotor and required cable and switch board of approved

brand and make etc.comp.as directed.

ProvidingTMTBarFE500/500Dreinforcement for R.C.C.workincluding 75.46 Kg.

bending,binding and placing in position complete upto floor two level

165 150 placing in position complete upto floor two level placing in position

complete upto floor two level

Providing and fixing 30mm thick solid both side prelam PVC door shutter 2867.00 Smt

166 3 (sintex door-equivalent) with necessary alluminium fitting

with EL-7 section frame

30 Conveyance charge of Earth,Lime, Murrum, building rubbish earch 235.51 Cu.M.

167 manure or sludge and excavated rock and fly ash,aggregate of

any kind etc.comp.upto 5 km lead.(L.S.)

Providing and laying polished granite stone slab 18 mm thick in risers of 2690.00 Smt

steps, dedo and pllars laid on 10 mm thick cement mortar 1:3 (1

168 1 cement:3 coarse sand) and jointed with gray cement slurry including rubbing

& polishing etc.complete.

1 Wall panelling with 12 mm MDF fixed to existing alluminium framing 1688.00 Smt

and making grove as per design and finished with royal plastic paint

169 as per instruction of engineer incharge.

Providing and laying 15mm bamboza wooden flooring as per 2690.00 Smt

architect's drawing with all necessary details as directed by the

170 0 project consultants. Use underlay for better result as per Detail

specifications and directed by the project consultants. (N.S.) (Approved

Applying two coats of Birla (whitecementbased) or Asian 40.19 Sq.M.

(acryliclapy-putty) or equivalent & two coats of primer of approved brand

171 50 and manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping

Finishing wall with weather proof exterior emulsion paint on wall surface (two 113.40 Sq.M.

coats) to give an required shape evenshade after thoroughly brushing the

172 65 surface to remove all dirt, and remains of loose powdered materials.etc

Providing and fixing flush door shutters, solid core construction 4686.36 Smt

with frame of first class hardwood with cross board and face

veneer or plywood face panels, with both side 1 mm laminate

finishing including anodized aluminum butt hinges with necessary

screws. Decorative type and pine wood core anodized minimum 3 no

150 mm long aluminum butt hinges in flush door shutters with 2 no of

brass holdfast 325 mm long 1 no brass tower bolt 250 mm long and two

173 0 no of 150 mm long brass door handle . Decorative both side

laminated Flush door 35 mm thick. with frame of 10 cm x 7 cmt Indian

teak wood frame including all necessary fitting fixtures

hardware screw and adhesive etc fixing up to all lead and lift height

up to 45 mtr from GL etc complete as per direction of engineer in

P/M/F chainlink jali 8'x4' size as per details sketch & instructionof engineer in 1230.00 Rmt

charge same as lal darwaja garden pattern consisting of 3'dia. M.S black pipe

'A' class 5'4" ht. fixed at 8'9" c/c in C.C 1:2:4 block of 9"x9"x9" size chain link

jali of size 2"x2"x10 gauge fixed in 35x35x5 mm MS angle frame 8'x4'

174 3 size with MS flat of size 25x3 mm welded jali etc.comp.The jali is to be

welded to MS pipe with MS flat as instruction given.The M.S pipe and the

M.S angle frame are to be painted one coat of primer and two coats of paint

as directed in line and level. (N.S)

Supplying and fixing of 300 mm-L x 15 mm-B x 380 mm-H Kerb 393.00 Rmt

block for Footpath in M-20 grade using 20 mm nominal size black

trap aggregate of Sevaliya/Timbaor equivalent quality for

pre-cast blocks, reasonablyexposed finish/ formwork

well equippedwith vibratory system for kerb stones of approved

design including curing, etc. complete, including thecost of formwork

etc. complete. The rate shall also include necessary

cutting of asphalt, fixing the Kerbstones in line and level on 5 cm

thick sand bedding

withnecessary equipments and materials. The rate shall also include

the flush pointing in CM (1:3) for all joints of the kerb stones. Filling of zari

alone the sides of the kerbstone fixed with Bituminous concrete

Bituminousconcrete /

C.C. mixed in proper position to flush withthe road surface as

directed by Engineer in change to form a portable mixture.a)

Laying on 5 cm thick Sand Bedding

Providing and Laying of Rubber Moulded Paver Block 501.60 Smt

Grey/Coloured 60 mm thick, M-35 Grade of any size shape (Usually

Uni-Paver Blocks) using black trap good quality aggragate of

mm nominal size for footpath,parking areas, service lanes and other

areas as mentioned in the drawing / instruction of engineer in charge.

Cost includes formworks using rubber mould, Rate providing and laying

paver blocks as per required grading and specification. The paver block

shall be mechanically compacted. The work of paving blocks shall be

executed in line and level by skill mason of flooring work only. It should be

laid in such a way that the no cutting of the paver block to be necessary. if

cutting of paver block necessary then it should be cut by machine only and

carting. The finished surface of the paver block shall have resonably

good, plain finished. Paver blocks shall be compacted and shall be

relaid if necessary. Gravel or such type of materials shall not be

allowed for production. Laying on 5 cms thick sand

Provoding and fixing flush door shutters, solid core construction with frame 1779.97 Smt

of first class hard wood with cross board and face veneer or ply wood

face panels, including anodised alluminium butt hinges with necessary

screws. (B) Non- decorative type and block board core anodised

177 2 alluminium butt hinges in flush door shutters (2) 35 mm thick. Labour work

for fixing any kind of paving with cement pointing in CM 1:2, including

watering, ramming etc comp. as dir.For pavement

Box type metal letters forming composite box made from 1mm thick

stainless steel plate of grade 304 having brush finish of following font

size to be fixed at Main Gate in english and or Gujrati and including

178 fixing charges approved before fixing by

clent / consultant.

178.a 1 400mm high 1000.00 Nos.

178.b 1 300 mm high 750.00 Nos.

178.c 1 230 mm high 565.00 Nos.

Providing and fixing false ceiling at all height including providing and fixing of 850.00 Smt

frame work made of special sections, power pressed from M.S. sheets and

galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per

IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick

with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange

fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia

bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50

mm of required length with nuts & bolts of required size and other end of

angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm

179 50 running at the spacing of 1200 mm centre to centre, to which the ceiling

section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm

each having lips of 10.5 mm, at 450 mm centre to centre, shall be

fixed in a direction perpendicular to G.I. intermediate channel with

connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at

every junction, including fixing perimeter channels 0.5 mm thick 27 mm high

having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to

wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long

dry wall screws @ 230 mm interval, including fixing of gypsum board to

ceiling section and perimeter channel with the help of dry wall screws of size

Providing at 230SPEED

& Fixing mm c/c,BUMP

No (1 and finishing

1 yellow) flush finishx

mm, Size per color End Cape 350 MM x 175 MM x 50 MM TOP DESIGN -

Lining Top flat ANTI SKID PATTERN FOR GRIP COLOUR :- YELLOW &

BLACK BODY MATERIAL :-

180 1 MODIFIED THERMOPLASTICS (Polymer Rubberized ) • ECO FRIENDLY

RECYCLE RUBBER Packing :- 4 pcs/ woven Bag Load Capacity :-

MT Fitting ( Fixing on TRAKE) :-4 holes & END CAPE :- 2 HOLE HEX

Bolts with Washer Epoxy for Bolt Fitting etc. complete as directed by EIC

Providing and fixing PVC/Gpsysum plain colour false ceiling with grid 933.00 Smt

type with aluminium frame from gypsteel, fastners

,props, Finishing as per architectural drawing allowing openings for

181 5 A.C. Diffusers, Light/Electrical Points etc –complete, Prior to fixing

on frame.(Brand : Anutone or equivalent ) (N.S.) or as directd by

engineer In Charge.

Provdg. & laying S.W. Gully trap with brick masonry chamber & water tight 1263.15 No.

182 1 G.T.Stone including fixing of covervSquare mouth trap

100 mm x100 mm size P-Trap

Providing cement vata (10cmx10cmsize) quarter roundin cement mortar 1:1 23.45 Rmt.

183 0 including neat cement finishing, waterin getc. complete.

1 Providing and laying (to level or slopes) and jointing with stiff mixture of 211.05 Rmt.

Cement Mortar in proportion 1:1 Salt glazed stoneware pipes including

184 testing of pipes and joints complete.(A) 100mm

1 Providing and laying (to level or slopes) and jointing with stiff mixture of 288.23 Rmt.

Cement Mortar in proportion 1:1 Salt glazed stoneware pipes including

185 testing of pipes and joints complete.(B) 150mm

Constructing brick masonry chamber for underground C.I. Inspection 2903.89 Each

chamber and bends with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm

186 1 size) foundation concrete 1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of neat cement on walls and

bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm and

450mm deep for single pipe line.

Constructing brick masonry chamber for underground C.I. Inspection 3624.51 Each

chamber and bends with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4

mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size)

187 1 foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on walls and bed concrete

etc. complete.(i)Inside dimensions 500mm x 700 mm and 450mm deep for

pipe line with one or two inlets.

Providing, supplying and fixing precast C.C. blocks (M-20) edge kerb having 219.00 Rmt.

size of 75 x 300 x 300 mm depth and as per design conveying it to the site,

188 2 jointing into C:M 1:3 and racking out the joints incl. necessary excavation of

asphalt, soil etc..completed.

Constructing a cooking Sandwich platform 60 cm. width and 70 cm high 754.95 Rmt.

resting on B.B.Masonry walls 23 cm.thick in C.M.(1:6) with (ii) Fixing black

189 0 Granitee 30mm thick laid on precast R.C.C. (1:2:4) slab with plastering on

exposed faces of wall in C.M. (1:4)

0 Providing and fixing hard drawn steel wire fabric 75mm x 25mm mesh or 754.65 Smt

190 weight not less than 7.75 kg. per Sq.M. to window frames etc. including60 x

20mm beading of teak wood.

Providing & fixing 15 cm wide chicken mesh jali with nails & then application 35.00 Rmt.

191 10 of 15 mm plaster on R.C.C.& masonary joints as per

dir.of engg.in charge

1 Providing and laying cement concrete flooring 1:2:4 (1-cement : 2- 348.08 Smt.

coarse sand : 4-graded stone aggregate 20mm nominal size) laid in one

layer and finished with a floating coat

of neat cement. (A) 50mm thick.

Providing and constructing, Underground (U/G) water tank of specified 6.50 Litre

capacity, on specified location, for all depths, in controlled CC of M-200

grade with bottom slab, top slab and RCC walls, including cost of

form work and reinforcement,with inside and outside plaster in CM 1 :3

and water proofing treatment as per IWP specification,including

injection, grouting, etc. complete. The rate includes for providing and

fixing two nos. 0.6m. x 0.6 m. size medium duty CI manhole cover/s at top,

including wash out pipe line and inlet and outlet connections etc.

Providing and fixing PVC Printed pain colour false ceiling with grid type 300.12 Smt

with alluminium frame consisting of 600mm x 600mm 3mm thick plain

PVC sheet used as panel insert in a frame work made using anodized

alluminium T section of size 1 x 1 (235 x 25mm, 19 gauge or 1 mm thick) in

square pattern of grid sizes of 2 x 2 (600 x 600mm) The alluminium

194 5 frame work is supported from the cceiling with the help of G.I. hook and G.I.

wire/6mm M.S. rods of required sizes to maintain proper level etc. The

aluminium frame work is supported on side wall with the use of alluminium

L section of size 1 x1 (25 x 25mm) angles etc. complete as per direction

of Engineer in charge. Manufactures specification and drawing.

5 Providing and supplying of labour for necessary manual excavation, 551.00 No

cleaning, Shifting of Material Or any other, or for any other work as

directed by Engineer In charge. The Rate

includes Handcart with Mazdoor

A 6 Mukadam/supervisior/karigar 425.00 No

B 2 Fitter/Plumber/Mason 697.00 No

C 2 WELDER/ Gas cutter at Day /night 689.00 No

Supplting of welding machine / gas cutter including cost of welding 1500.00 No

D 1 rods/gas, Transportation, including carting from site

E 2 Mazdoor at Day Female 450.00 No's

E 2 Mazdoor at Day Male 493.00 No's

Supplying electric breaker machine for RCC slab or asphalt demolishing 1071.42 Shift

work on site by using operator, fuel, power supply etc.complete as

directed. (no payment should be allowed for non working condition of

machinery and for pipe line excavation and M.H. work. Allowed only for

break down work) (Based on Previously approved rate by CE sir )

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR

13.5) PIPE having National Sanitation Foundation (NSF) seal for potable

198 water of following dia.

Nominal bore tube fittings and clamps including making good the wall,

ceiling and floor etc. complete.

A 5 15 MM DIA 165.21 Rmt

B 2 20 MM DIA 202.97 Rmt

C 2 25 MM DIA 247.25 Rmt

D 0 32 MM DIA 330.36 Rmt

E 2.00 40 MM DIA 437.66 Rmt

F 1 50 MM DIA 647.30 Rmt

Supplying and fixing C.I. cover 300mm x 300mm without frame for 491.80 Each

199 1 Gulley trap (Standard pattern) te weight of cover to

be not less 4.53 Kg.)

Providing and fixing to wall ceiling and floor 10.0Kg.F/Cm2 working

pressure polythene pipes of the following out side Dia. Low densidy,

200 complete with special falnge compression type fittings, wall

clips etc. including making good the wall ceiling and floor.

Proviging and Fixing Storage Shutter made out of 50mm X 25 mm Indian Teakwood 6805.00 Sq.mt.

Frame and 18 mm Ply Board. With 1 mm thick laminate finish in the front and

mm thick Laminate on Back Side with 12 mm thick Indian teakwood beading. The scope

also include providing and fixing s.s. finish hardware as per the Requirement. The

rate include cost of all labour, material and with all hardware like handle, magnate,

tackels, adhesive, screws, etc.for satisfactory completion of this items.All Exposed

Wood Work shall have

malamine polish etc. complete.

202 1.00 Providing & Fixing Sun Control Reflective Type Film / Frosted Film as Selected by 646.37 Sq.mt.

Architect/ Engg. In Charge For Glass Doors /

Windows etc. as Directed.

203 Providing & Fixing in Position Vertical Roller Blinds with Minimum 3 1372.03 Sq.mt.

% and Maximum 5 % Light Transperace Screen Fabric Incuding Providing &

Fixing of Powder coated G- Channel at the Topof Window with necessary Screw

, Cleats etc. and PVC Roller ( Weight Pipe) and PVC Chain For Up and Down

Movement of Blinds etc. of Approved Make and as per Drawings / Instruction of Engg. in

Charge For All Colors and Shades. Rates Includes all Lead and Lift For All Floor Level,

All Height , All Material , Accessories, Fixing , Scaffolding , Labor etc. Complete in

All Respects. All Required Accessories & Material must be From Same Manufacturer.

204 5.00 Providing valleys 900mm overall in plain 1.6mm thick G.I. sheet fixed with G.I. J or 1042.78 Sqm

L Hooks, Bolts and nuts glavanised iron J or L Hooks Bolts and nuts 8mm dia G.I.

Limpet and bitumen washers

205 Structural steel work ( Confirming to IS 4923-1997) riveted, bolted or 126.68 Kg

welded in builtup for all type sections, in framed work, including

cutting, hoisting, fixing in position and applying a priming coat of

approved steel primer all complete as per the structural designs and directions

of Engineer in charge.Column ( 122 x 61 x 3.6mm )

206 Providing and applying approved coloured chips 20mm thick STONE CREAT 709.60 Sqmt

PLASTER for exterior / interior side on wall up to full height from ground level

consisting of 12mm thick backing coat of CM 1:3 (1 cement : 3 Bodeli sand) and 8mm

thick finishing coat of CM 1:1 (1 cement (Grey / White / Colour : 1 stone grit (approved

coloured chips)) including providing & fixing 300mm wide strip of chicken net at

0.00 vertical and horizontal joints of RCC and masonary including 10mm alluminium

channel for expantion joint / grooves, curing, necessary scaffolding in true line and

level etc. complete as

directed by EIC.

207 Providing and laying 18 mm thick polished granite stone machine cut in single 3279.00 Sqmt

piece (Max. available) in sill and jambs of door

,window,ventilation & lift wall cladding,staircase flooring landing, risers & treads,

skirting laid over 10 mm thick cement mortar 1 : 3 (1 cement : 3 coarse sand) and

jointed with grey cement slurry with matching pigment incl. rubbing and

polishing,half rounding edge and incl. fixing of hilty fastener at every 1/3 span of sill as

required size etc. complete colour and shed as approved by architect

engineer in charge.

208 Filling in foundation and plinth with brick Bats Chhara in layers of 20cm. 594.61 Cmt

1.00 thickness including watering, remming and consolidating etc. complete.

209 Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6- 4006.15 Cmt

0.00 crushed stone aggregates 20 mm nominal size) and curing

complete including cost of formwork in (A) Wall Caps / Coping

210 Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2- coarse 8508.71 Cmt

sand : 4- graded stone aggregates 20 mm nominal size) and finishing smooth

0.00 with,curing etc. complete including the cost of formwork but excluding the

cost of reinforcement for R.C.C work in (A) BEAMS :(i) Having cross-

sectional area 0.05 to 0.08 Sq.M

211 Providing and fixing complete sliding shutter solid PVC window 25mm thick 2576.85 Sq.mt.

factory made glazed solid PVC window shutter consisting of frame made out

of M.S. tube of 19 gauge of size 15 x 15mm for styles top, bottom rail. M.S.

frame shall have a coat of steel primer of approved make and manufacture,

M.S. frame shall be covered with 4mm thick heat mouled PVC ‘C’ channel

of size 58mm x 25mm x 38-mm out of which 8mm shall be bent at 90 degree

towards inner side on front face of the window shutter forming stiles. For top

rail and bottom rails, M>S. frame shall be covered with 4mm thick, 58mm

wide PVC sheet out of which 8mm shall be bent at 90 degree towards inner

1.00 side on front face and 38mm wide PVC sheet shall cover the M.S. frame at

top and bottom rail on back side of window shutter, 4mm thick 15mm wide

cross PVC sheet as gap insert for top and bottom rail. PVC sheet beading of

8mm thick (4mm x 2) to be stuck internally with solvent cement adhesive in

top and bottom rails. Glass panel will be fitted externally in the clear space

available between stiles & rails and fixed

between PVC sheet of stiles and rails bent at 90 degree on front face 12mm x

123mm ‘L’ shape outer PVC beading nailed on stiles and rails at theback side

so that ‘L’ shape outer PVC beading can be removed when required for

replacement of broken glass etc. complete as per direction of etc. complete as

212 Providing and fixing PVC Printed pain colour false ceiling with grid type 766.00 Sq.mt.

with alluminium frame consisting of 600mm x 600mm 3mm thick plain PVC

sheet used as panel insert in a frame work made using anodized alluminium T

section of size 1 x 1 (235 x 25mm, 19 gauge or 1 mm thick) in square pattern

of grid sizes of 2 x 2 (600 x 600mm) The alluminium frame work is

1.00 supported from the cceiling with the help of G.I. hook and G.I. wire/6mm

M.S. rods of required sizes to maintain proper level etc. The aluminium

supported on side wall with the use of alluminium L section of size 1 x 1 (25

x 25mm) angles etc. complete as per direction of Engineer in charge.

Manufactures specification and drawing.

213 Providing and fixing sheet glass, selected quality (Type-C) bedded in putty 1143.05 Sq.mt.

and fixed with wooden beading including the cost of wooden beadings of

1.00 first class teakwood and necessary cutting of glass.

(1) 5 mm thick.

214 Providing 20 mm thick double coat mala cement plaster on interior brick / 269.78 Sq.mt.

concrete work for plastering comprising of base coat of 12 mm thick cement

plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and

mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished

with trovel including scaffolding curing etc. complete.

215 Pointing on brickwork with cement mortar 1:3 (1- cement : 3-coarse sand) 91.20 Sq.mt.

(A) Flush pointing

216 Cutting out cracks of roof terrace to V- section , cleaning out, wetting , 64.58 Rmt

2.00 grouting with cement and sand slurry 1:3 (1-cement 3-sand )

217 Acoustic sheet 3500.00 Sq.mt.

PET acoustic sheets are high-density, porous sound-absorbing panels made

from polyethylene terephthalate (polyester) fibers. They feature an NRC

rating of 0.75 to 0.95, a density of 180–240 kg/m³, and standard dimensions

R-Value: Approximately 3.0 to 3.3 per inch of thickness.Density Range:

Varies from 30 kg/m³ (lightweight batts/rolls) up to 150+ kg/m³ (high-density

industrial boards and slabs).

Acoustic and Water PropertiesSound Absorption: High open-porosity matrix

yields exceptional noise reduction coefficients (NRC 0.85 to 1.05 depending

0.00 on thickness/density).

Fire and Thermal SafetyFire

Classification: Non-combustible, Euroclass A1 rating (highest grade).

Gypsum perforated

Perforation and Acoustic

PerformanceHole/Slit Types: Circular (6 mm to 20 mm), square (10x10 mm),

petal, or linear slotsPerforation Rate: Open area ranging from 9.5% to 23% of

the board surfaceAcoustic Backing: Sound-absorbing non-woven acoustic

fleece or tissue on the rear sideNRC Rating: 0.55–0.65 standard; increases up

to 0.75–0.85 when paired with mineral/glass wool infill mats

218 Providing and fixing Anutone / usg / saint govind wall acoustical paneling 7059.00 Sq.mt.

using Stretch NRC Fabric fixing with FS 25 Griper system,Strand 2400 x

x 20mm,Tracks ( Perimeter Track , Half wrap, mid seam whatever is

required) fixed directly by staping to the SB25/SB50 which is screw fixed

directly to the wall along the perimeters with backing of Anutone make NSS

SoundSmooth MB Primer 2400 X 600 X 15 mm thick Panels with fixed

horizontal/Vertical to the wall at 300mm c/c & Anutone make Synth PF 25 x

10 with SoundStick S7adhesive used as backing material. As per

manufactures specification. High NRC, class A fire rating,Fire Hazard

Classification of class I or A in accordance with ASTM E-84 or UL-

testing parameters,The colour shade of malamine and veneer as approved by

Architect and as specified by manufacturer including all accessories, material