WELCOME MAINTENANCE OF CERTAIN MARRIED ACCOMMODATIONS INCLUDING E/M WORKS IN OMQ AREA AT AF STN TEZPUR UNDER GE (AF) TEZPUR.

Amount

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exc. 1.5 Sq. M but not exc. 4.0 Sq M each, complete all as directed.

Taking down chowkhats or frame not exc.1.5 Sq. M each and re fixing in the same opening, complete all as directed.

Taking down chowkhats or frame exc.1.5 Sq. M but not exc. 4.0 Sq M each and re fixing in the same opening, complete all as directed.

Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each,complete all as directed.

Resecuring or easing and adjusting existing shutters of any description exc 1 sq. m but n exc 2 sq. m each without taking down,complete all as directed.

Materials and Labour for plain cement concrete (1:3:6) type C1 using 20 mm graded aggregate in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary from work complete all as specified and directed.

Materials and Labour for brick work with Sub Class ‘B’ bricks straight or curved on plan exceeding 6M mean radius built in cement mortar (1:6), including demolition of existing brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles,complete all as specified and directed.

Materials and Labour for,cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings,steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, in stone concrete block or slab walls, complete all as specified and directed.

Supply and Fix, second class hard wood plain fillets rectangular or triangular in section, clean sawn secured with nails, sectional area exc 13 Sqcm but n.exc 25 Sqcm including dismanteling existing timber rails, posts, rafters,purlins, etc. under 40 sq. cm in section,unframed,complete all as specified and directed.

Materials and Labour for,second class hard wood, plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid, rounded or chamfered put together with glue, pinned at joints, complete all as specified and directed.

Supply and Fix, 35 mm thick, second class hardwood, glazed skeleton shutters, open rebated and prepared to receive glass, gauze etc.(without sash bars) , edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc; sizes of members of windows, ventilators provided with stiles and rails as specified in SSR Part I Section 8, clause 8.24 (a) and fitted to chowkhats,complete all as specified and directed.

Supply and Fix, 35 mm thick,plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated,complete all as specified and directed.

Supply and Fix, mild steel barrel tower bolt, black Japan finished, with bright bolt 200 mm long, complete all as specified and directed.

Supply and Fix in repairs,mild steel pressed handles,150 mm size, oval type, black Japan finished,complete all as specified and directed.

Supply and Fix in repairs, mild steel sliding door bolts,length of bolt 250 mm, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.

Supply and Fix, medium wight, cold rolled mild steel butt hinges, 50 mm size,complete all as specified and directed

Supply and Fix, medium wight, cold rolled mild steel butt hinges,100 mm size,complete all as specified and directed

Supply and Fix,continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps 30 mm (when open),complete all as specified and directed.

Supply and Fix,40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished,complete all as specified and directed.

Supply and Fix in repair,40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished,complete all as specified and directed.

Supply and Fix,50mm dia, polished, hard wood knobs fixed with screws, complete all as specified and directed.

Supply and Fix in repairs,harrison rails, mild steel, chromium plated with fixing brackets,stops, rollers etc.,complete all as specified and directed.

Supply and Fix,alloy steel, polished,door catcher magnet,size 50 mm x 30 mm x 10 mm, complete all as specified and directed.

Supply and Fix,stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

Supply and Fix in repairs,stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

Materials and Labour for mild steel works, conforming to Fe 290, Grade E-165 , in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles, complete all as specified and directed.

Supply and Fix in repairs,projecting type hinges for steel windows with side hung shutters ,complete all as specified and directed.

Resecuring or easing and adjusting side hung shutters of steel windows of any description exceeding 1 sq.m and n. exc 2 sq.m in each opening without taking down,complete all as directed.

Materials and Labour for,18/19 mm thick prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work and including dismantling existing timber boarding of any description fixed in any position with screws,complete all as specified and directed.

Materials and Labour for, glazed ceramic coloured tiles, 450 X 300 X 7mm thick, conforming to IS 15622, economy class, Grade B III, on vertical surface of wall such as dados, skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:3) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises,, complete all as specified and directed.

Materials and Labour for,Non - skid Ceramic tiles, coloured, 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,conforming to IS 15622, economy class, Grade B IIa, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) and including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed.

Materials and Labour for granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) and including dismantling existing stone slabs and tiles of any description or thickness,laid,bedded in any mortar, complete all as specified and directed.

Demolition of existing cement concrete (un reinforced) in padding of roof slabs,covings of chajjas etc.,roughening surfaces of old concrete roof slab/chajjas by picking, sweeping clean and washing down with water to remove dust, etc.,brushing neat cement slurry with 3.0 kg of cement per sq. metre and rendering 10 mm thick, cement plaster/screed, in cement mortar (1:3) mixed with water proofing compound as per manufactures instructions over and including 25 mm thick plain cement concrete (1:2:4) type B0 using 12.5 mm graded aggregates,complete all as specified and directed.

Materials and Labour for rendering 10 mm thick, cement plaster, in cement mortar (1:6) on surface other than fair face of brickwork and finishing surface even and smooth without using extra cement and including applying two coats of distemper oil emulsion over a coat of primer over and including 1mm thick wall care putty,complete all as specified and directed.

Materials and Labour for rendering 10 mm thick, cement plaster, in cement mortar (1:6) on surface other than fair face of brickwork and finishing surface even and smooth without using extra cement,including taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc.,and including applying two coats of distemper oil emulsion over a coat of primer,complete all as specified and directed.

Material and Labour for preparing old surfaces plastered or unplastered and applying one coat of white wash,on walls, complete all as specified and directed.

Material and Labour for preparing old surfaces plastered or unplastered and applying one coat of white wash,on ceiling, complete all as specified and directed.

Material and Labour for washing,rubbing down and stopping of distempered and painted surfaces and applying one coat of distemper oil emulsion,on walls, complete all as specified and directed.

Complete removal of existing treatment on walls and applying two coats of distemper oil emulsion over a coat of primer over and including 1mm thick wall care putty,complete all as specified and directed.

Material and Labour for washing,rubbing down and stopping of distempered and painted surfaces and applying one coat of plastic emulsion paint,on walls, complete all as specified and directed.

Material and Labour for, 3 mm thick sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane,including hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads,complete all as specified and directed.

Material and Labour for,4 mm thick sheet glass,ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane,including hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones,complete all as specified and directed.

Material and Labour for applying one coat of synthetic enamel paint (ordinary tint) on old painted wood or wood based surface of any description,over 10 cm in width or girth, not otherwise described, including preparation of surfaces complete all as specified and directed.

Material and Labour for applying one coat of synthetic enamel paint (ordinary tint) on old painted sttel and iron surface of any description,over 10 cm in width or girth, not otherwise described, including preparation of surfaces complete all as specified and directed.

Material and Labour for applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer on new or previously untreated wood or wood based surface of any description,over 10 cm in width or girth, not otherwise described, including preparation of surfaces complete all as specified and directed.

Taking up or down, steel tubing 15 mm bore, and connection including cleaning for re-fixing and refixing old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.), complete all as directed.

Taking up or down, steel tubing 20mm bore, and connection including cleaning for re-fixing and refixing old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.),complete all as directed.

Materials and Labour for galvanized steel tubing, medium grade, 15 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor,including taking up or down existing steel tubing ,complete all as specified and directed.

Materials and Labour for galvanized steel tubing, medium grade, 20 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor,including taking up or down existing steel tubing ,complete all as specified and directed.

Material and Labour for 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I , including provision of ball valves high pressure of PTMT (Minimum weight 210 gms) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, 20 mm bore and including dismantling existing water tanks and removing to store, complete all as specified and directed.

Material and Labour for 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I,including provision of ball valves high pressure of PTMT (Minimum weight 210 gms) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, 20 mm bore and including dismantling existing water tanks and removing to store, complete all as specified and directed.

Supply and Fix in repairs,ball valves high pressure of PTMT (Minimum weight 210 gms) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, 20 mm bore,complete all as specified and directed.

Supply and Fix in repairs, bib tap, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule, 15 mm bore and fixed, complete all as specified and directed.

Supply and Fix in repairs, bib tap,cast copper alloy,chromium plated,long body type with wall flange and with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule, 15 mm bore and fixed, complete all as specified and directed. [Cat No. CON-107KN of Make “Jaquar” or equivalent Model of Make “Marc”/ ”Kohler"/ "Grohe”]

Supply and Fix in repairs, angle stop valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for steel pipe of for unions, 15 mm bore, complete all as specified and directed.

Supply and Fix in repairs, pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, 15 mm bore,complete all as specified and directed.

Supply and Fix in repairs,Central Hole Basin Mixer, round spout with Popup Waste assembly with 10 mm dia. 450 mm Long Braided Hose, screwed for iron pipe, 15 mm bore, complete all as specified and directed. [Cat No. CON-169KNB of Make “Jaquar” or equivalent Model of Make “Marc”/ ”Kohler"/ "Grohe”]

Supply and Fix in repairs,Sink Mixer with swinging spout (Wall Mounted Model) with connecting legs & wall flanges,screwed for iron pipe, 15 mm bore, complete all as specified and directed. [Cat No. CON-309KNM of Make “Jaquar” or equivalent Model of Make “Marc”/ ”Kohler"/ "Grohe”]

Supply and Fix in repairs,brass CP mixer for mixing hot & cold water screwed down for iron pipe 15 mm bore and fixed,complete all as specified and directed. [Cat No. CON-219KN of Make “Jaquar” or equivalent Model of Make “Marc”/ ”Kohler"/ "Grohe”]

Supply and Fix in repairs,swivel shower of PTMT any colour for fixing with 15mm pipe (Minimum weight 40gms) including shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms,complete all as specified and directed.

Supply and Fix, waste coupling of PTMT (half or full threaded) (Minimum weight 45gms), for 32 mm bore discharge pipe,complete all as specified and directed.

Supply and Fix,PVC connections 15 mm size with PTMT nuts of length 450 mm,complete all as specified and directed.

Supply and Fix in repairs,sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long,complete all as specified and directed.

Supply and Fix in repairs,brass chromium plated soap dish,100 mm size, all as per Cat No ACN-1131N of Make “Jaquar” or equivalent Model of Make “Marc”/”Kohler"/ "Grohe”,complete all as specified and directed.

Supply and Fix in repairs,brass chromium plated toilet paper roll holder,100 mm size, all as per Cat No ACN-1151N of Make “Jaquar” or equivalent Model of Make “Marc”/”Kohler"/ "Grohe”,complete all as specified and directed.

Supply and Fix in repairs,PVC collapsible waste pipe (31/32 x 950) mm all as pe Cat No.3274 of Make Prayag or equivalent model of Make Polytuff/Shakti, complete all as specified and directed.

Supply and Fix in repairs,Hand Shower (Health Faucet) with 8 mm bore, 1.2 Metre long PVC tube and wall hook with plastic body,all as per Cat No ALD-563 of Make “Jaquar” or equivalent Model of Make “Marc”/”Kohler"/ "Grohe”, complete all as specified and directed.

Supply and Fix in repairs, vitreous China wash basin, white, flat back, size 550 X 400 mm excluding taps, waste chain and porcelain stopper, but including brackets,complete all as specified and directed.

Supply and Fix in repairs,sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes;including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm,complete all as specified and directed.

Supply and Fix,stainless steel kitchen plate rack of overall size 900 mm (L) x 750 mm (W) x 250 mm (D),complete all as specified and directed.

Supply and Fix in repairs, vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440 mm, white, with integral foot rests and with ‘P’ or ‘S” trap, (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including provision of lime concrete bedding, complete all as specified and directed.

Supply and Fix in repairs,vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device,complete all as specified and directed.

Supply and Fix in repairs,vitreous China one piece wash down water closet pan (pedestal pattern),white,including seat cover and twin flush fittings,complete all as specified and directed. [Cat. No. S1013123 'CLOUD' of Make Cera or equivalent Model of Make Parryware/Johnson Pedder/Hindware (Italian collection)]

Supply and Fix in repairs,PVC valve less, syphonic action type, flushing cistern, low level,white, with inlet, ball valve, float and handle, of capacity 10 Litres, including brackets, flush pipe, complete all as specified and directed.

Supply and Fix in repairs,plastic water closet seat,closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device,complete all as specified and directed.

Supply and Fix, 50 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.,complete all as specified and directed.

Supply and Fix in repairs,grating doom 100mm dia of PTMT (Minimum weight 25gms),complete all as specified and directed.

Supply and Fix in repairs,grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) ,complete all as specified and directed.

Supply and Fix in repairs,PVC (SWR) multi floor trap with grating including jointing with solvent cement,with diameter of outlet 75 mm, including jointing with solvent cement,complete all as specified and directed.

Taking down carefully existing copper/ aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendent, regulators, sockets, light fittings etc, removing materials from site and making good disturbed surfaces of walls, floors etc., complete all as specified and directed.

Taking down carefully existing copper/aluminium circuit/submain wirings of any size (2 runs single core and earth continuity) complete including PVC casing capping/ PVC conduit/Steel Conduit with fittings etc, removing materials from site and making good disturbed surfaces of walls, floors etc.,complete all as specified and directed.

Disconnecting electrical connections and taking down carefully existing switch fuse units/MCB DBs of any description complete including Fuse/MCBs/MCCBs etc.,removing materials from site and making good disturbed surfaces of walls, floors etc.,complete all as specified and directed.

Materials and Labour for point wiring with 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing and capping complete with all fittings and accessories, fixed to walls/ceiling, including sunk type pressed steel terminal boxes 60 mm deep, conforming to IS-5133 (Part-I) with 3 mm thick plastic laminated sheet cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLHS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for,one light/fan point controlled by one switch,complete all as specified and directed.

Materials and Labour for point wiring with 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing and capping complete with all fittings and accessories, fixed to walls/ceiling, including sunk type pressed steel terminal boxes 60 mm deep, conforming to IS-5133 (Part-I) with 3 mm thick plastic laminated sheet cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLHS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for,one bell point controlled by one bell push,complete all as specified and directed.

Materials and Labour for point wiring with 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing and capping complete with all fittings and accessories, fixed to walls/ceiling, including sunk type pressed steel terminal boxes 60 mm deep, conforming to IS-5133 (Part-I) with 3 mm thick plastic laminated sheet cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLHS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for,one 3 Pin 5 Amps socket outlet independent,complete all as specified and directed.

All as per Serial Item No.86 Here in Before but for,one 3 Pin 5 Amps socket outlet on same board with other switch,complete all as specified and directed.

Materials and Labour for point wiring with 2.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing and capping complete with all fittings and accessories, fixed to walls/ceiling, including sunk type pressed steel terminal boxes 60 mm deep, conforming to IS-5133 (Part-I) with 3 mm thick plastic laminated sheet cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLHS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for,one 3 Pin 15 Amps socket outlet independent,complete all as specified and directed.

Materials and Labour for point wiring with 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core,drawn into existing steel conduit/PVC conduit,including 3 mm thick plastic laminated sheet cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for,one light/fan point controlled by one switch,complete all as specified and directed.

Materials and Labour for point wiring with 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core,drawn into existing steel conduit/PVC conduit,including 3 mm thick plastic laminated sheet cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for,one light point controlled by two 2-way switchs,complete all as specified and directed.

Materials and Labour for point wiring with 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core,drawn into existing steel conduit/PVC conduit,including 3 mm thick plastic laminated sheet cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for,one 3 Pin 5 Amps socket outlet independent,complete all as specified and directed.

All as per Serial Item No.91 Here in Before but for,one 3 Pin 5 Amps socket outlet on same board with other switch,complete all as specified and directed.

Materials and Labour for point wiring with 2.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core,drawn into existing steel conduit/PVC conduit,including 3 mm thick plastic laminated sheet cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core,earth continuity conductor connected to common earth dolly for,one 3 Pin 15 Amps socket outlet independent,complete all as specified and directed.

Supply and Fix, switch piano, flush button, single pole, one way, 5 Amps, complete all as specified and directed.

Supply and Fix in repairs,switch piano, flush button, single pole, one way, 5 Amps, complete all as specified and directed.

Supply and Fix, switch piano, flush button, single pole, two way, 5 Amps, complete all as specified and directed.

Supply and Fix in repairs, switch piano, flush button, single pole, two way, 5 Amps, complete all as specified and directed.

Supply and Fix,bell push, flush type, single pole, 5 Amps, complete all as specified and directed.

Supply and Fix in repairs,bell push, flush type, single pole, 5 Amps, complete all as specified and directed.

Supply and Fix, socket outlet 2 in 1, 3 pin, 5A, complete all as specified and directed

Supply and Fix in repairs, socket outlet 2 in 1, 3 pin, 5A, complete all as specified and directed

Supply and Fix,switch socket combination 2 in 1,5A,flush type, complete all as specified and directed.

Supply and Fix in repairs,switch socket combination 2 in 1,5A,flush type, complete all as specified and directed.

Supply and Fix,switch socket combination 3 pin 5A/16A, 5 in 1 flush type, complete all as specified and directed.

Supply and Fix in repairs,switch socket combination 3 pin 5A/16A, 5 in 1 flush type, complete all as specified and directed.

Supply and Fix stepped type electronic fan regulator, flush type, on existing phenolic laminated sheet etc. as required , complete all as specified and directed.

Supply and Fix in repairs, stepped type electronic fan regulator, flush type, on existing phenolic laminated sheet etc. as required , complete all as specified and directed.

Supply and Fix, Ceiling Rose, three terminal, PVC/ Polycarbonate insulated body, complete all as specified and directed.

Supply and Fix in repairs, Ceiling Rose, three terminal, PVC/ Polycarbonate insulated body, complete all as specified and directed.

Supply and Fix, Bell multi music type, AC 230 Volts,complete all as specified and directed.

Supply and Fix in repairs, Bell multi music type, AC 230 Volts,complete all as specified and directed.

Supply and Fix, Lamp holder, PVC/Polycarbonate type, with back plate suitable for batten fittings complete all as specified and directed.

Supply and Fix in repairs, Lamp holder, PVC/Polycarbonate type, with back plate suitable for batten fittings,complete all as specified and directed.

Supply and Fix in repairs,modular switch 1 way 6A,1 module,complete all as specified and directed.

Supply and Fix in repairs,modular switch 2 way 6A,complete all as specified and directed.

Supply and Fix in repairs,socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed.

Supply and Fix in repairs,modular switch socket combination 16A, 6 pin,3 module,complete all as specified and directed.

Supply and Fix in repairs,modular fan step regulator, 120W - 2 module, complete all as specified and directed.

Supply and Fix in repairs,3 mm thick plastic laminated sheet cover (ISI Marked) of size 100 mm x 100 mm,for mounting switches/ regulator /bell push etc,complete all as specified and directed.

Supply and Fix in repairs,3 mm thick plastic laminated sheet cover (ISI Marked) of size 125 mm x 175 mm,for mounting switches/ regulator /bell push etc,complete all as specified and directed.

Supply and Fix in repairs,3 mm thick plastic laminated sheet cover (ISI Marked) of size 125 mm x 225 mm,for mounting switches/ regulator /bell push etc,complete all as specified and directed.

Supply and Fix in repairs,3 mm thick plastic laminated sheet cover (ISI Marked) of size 225 mm x 275 mm,for mounting switches/ regulator /bell push etc,complete all as specified and directed.

Supply and Fix,LED lights fitting 1x 20W, 220V,AC decorative box type with driver,holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose,complete all as specified and directed. [Cat No. CCS-100-20-65-HL2-DP-NWH of Make 'Crompton Greaves' or equivalent Model of Make 'Wipro'/'Philips'/'GE']

Supply and Fix in repairs,LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose,complete all as specified and directed. [Cat No. CCS-100-20-65-HL2-DP-NWH of Make 'Crompton Greaves' or equivalent Model of Make 'Wipro'/'Philips'/'GE']

Supply and Fix, LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size,complete all as specified and directed. [Cat No.LBHP-10-CDL of Make 'Crompton Greaves' or equivalent Model of Make 'Wipro'/'Philips'/'GE']

Supply and Fix in repairs, LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size,complete all as specified and directed. [Cat No.LBHP-10-CDL of Make 'Crompton Greaves' or equivalent Model of Make 'Wipro'/'Philips'/'GE']

Supply and Fix in repairs,round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size,complete all as specified and directed. [Cat No.LCDEP-06-CDL of Make 'Crompton Greaves' or equivalent Model of Make 'Wipro'/'Philips'/'GE']

Supply and Fix in repairs,round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size,complete all as specified and directed. [Cat No.LCDEP-12-CDL of Make 'Crompton Greaves' or equivalent Model of Make 'Wipro'/'Philips'/'GE']

Supply and Fix in repairs, decorative wall light fixture made up of polycarbonate, with and including 15 W retrofit LED Lamp (Spiral B-22 base) complete all as specified and directed. [Model CITY 2, Cat No.LHDL03160099 for light fitting and Cat No. LHLDDEEEML8R015 for Lamp, of Make 'Havells' or equivalent Model of Make 'Philips'/ 'Wipro']

Supply and Fix in repairs,36 Watts,LED recessed full lit luminaire,size 600 mm x 600 mm with glare free uniform illumination,lumen efficacy >100 Lumen/Watt,complete all as specified and directed. [Cat No.LCTLSNE-36-FO-CDL of Make 'Crompton Greaves' or equivalent Model of Make 'Wipro'/'Philips'/'GE']

Materials and Labour for two single core FRLSH PVC insulated unsheathed cable 4.00 Sq. mm. (Nominal area) with stranded copper conductor cable, 1100 Volts grade, drawn in and including PVC casing and capping and continuous earth wire of single core FRLSH PVC insulated, unsheathed cable 4.00 Sq. mm (nominal area) with stranded copper conductor cable, 1100 Volts grade for circuit/sub main wiring,complete all as specified and directed.

Materials and Labour for two single core FRLSH PVC insulated unsheathed cable 6.00 Sq. mm. (Nominal area) with stranded copper conductor cable, 1100 Volts grade, drawn in and including PVC casing and capping and continuous earth wire of single core FRLSH PVC insulated, unsheathed cable 6.00 Sq. mm (nominal area) with stranded copper conductor cable, 1100 Volts grade for circuit/sub main wiring,complete all as specified and directed.

Materials and Labour for two single core FRLSH PVC insulated unsheathed cable 4.00 Sq. mm. (Nominal area) with stranded copper conductor cable, 1100 Volts grade, drawn into existing surface/recessed steel/PVC conduit and continuous earth wire of single core FRLSH PVC insulated, unsheathed cable 4.00 Sq. mm (nominal area) with stranded copper conductor cable, 1100 Volts grade for circuit/sub main wiring, complete all as specified and directed.

Materials and Labour for two single core FRLSH PVC insulated unsheathed cable 6.00 Sq. mm. (Nominal area) with stranded copper conductor cable, 1100 Volts grade, drawn into existing surface/recessed steel/PVC conduit and continuous earth wire of single core FRLSH PVC insulated, unsheathed cable 6.00 Sq. mm (nominal area) with stranded copper conductor cable, 1100 Volts grade for circuit/sub main wiring, complete all as specified and directed.

Supply and Fix,single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amps, 240V, complete all as specified and directed. [Cat No. 5078 11 of Make Legrand or equivalent Model of Make L&T/ Hager/Seimens/GE/Schneider/ABB]

Supply and Fix, Double Door, Sheet Metal Enclosure for DBs for mounting of MCB for 240 Volts, 4 way, with 200 Amps rated bus bar, Single Pole & Neutral,complete all as specified and directed. [Cat No. 5076 10 of Make Legrand or equivalent Model of Make L&T/Hager/ Seimens/GE/Schneider/ABB]

Supply and Fix, Double Door, Sheet Metal Enclosure for DBs for mounting of MCB for 240 Volts, 8 way, with 200 Amps rated bus bar, Single Pole & Neutral,complete all as specified and directed. [Cat No. 5076 11 of Make Legrand or equivalent Model of Make L&T/Hager/ Seimens/GE/Schneider/ABB]

Supply and Fix, Double Door, Sheet Metal Enclosure for DBs,415 Volts, 4 Way,Triple Pole & Neutral,complete all as specified and directed. [Cat No. 5076 70 of Make Legrand or equivalent Model of Make L&T/Hager/ Seimens/GE/Schneider/ABB]

Supply and Fix, miniature circuit breaker (MCBs) single pole, 240 Volts, 10KA, 6 to 32 Amps complete all as specified and directed. [Cat No. 4085 87-4085 95 of Make Legrand or equivalent Model of Make L&T/Hager/Seimens/GE/Schneider/ABB]

Supply and Fix in repairs, miniature circuit breaker (MCBs) single pole, 240 Volts, 10KA, 6 to 32 Amps complete all as specified and directed. [Cat No. 4085 87-4085 95 of Make Legrand or equivalent Model of Make L&T/Hager/Seimens/GE/Schneider/ABB]

Supply and Fix, miniature circuit breaker (MCBs) single pole and neutral, 240 Volts, 10KA, 6 to 32 Amps complete all as specified and directed. [Cat No. 4086 09-4086 17 of Make Legrand or equivalent Model of Make L&T/ Hager/Seimens/GE/Schneider/ABB]

Supply and Fix in repairs, miniature circuit breaker (MCBs) single pole and neutral, 240 Volts, 10KA, 6 to 32 Amps complete all as specified and directed. [Cat No. 4086 09-4086 17 of Make Legrand or equivalent Model of Make L&T/ Hager/Seimens/GE/Schneider/ABB]

Supply and Fix, miniature circuit breaker (MCBs) single pole and neutral, 240 Volts, 10KA, 40 Amps complete all as specified and directed. [Cat No. 4086 18 of Make Legrand or equivalent Model of Make L&T/ Hager/Seimens/GE/Schneider/ABB]

Supply and Fix in repairs, miniature circuit breaker (MCBs) single pole and neutral, 240 Volts, 10KA, 40 Amps complete all as specified and directed. [Cat No. 4086 18 of Make Legrand or equivalent Model of Make L&T/ Hager/Seimens/GE/Schneider/ABB]

Supply and Fix, miniature circuit breaker (MCBs) triple pole, & neutral, 415 Volts, 10KA, 63 Amps complete all as specified and directed. [Cat No. 4086 83 of Make Legrand or equivalent Model of Make L&T/ Seimens]

Supply and Fix in repairs, miniature circuit breaker (MCBs) triple pole, & neutral, 415 Volts, 10KA, 63 Amps complete all as specified and directed. [Cat No. 4086 83 of Make Legrand or equivalent Model of Make L&T/ Seimens]

Materials and Labour for,earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm dia galvanised iron or steel wire, complete all as specified and directed.

Materials and Labour for earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.5M below normal ground level connected to galvanised steel earth lead wire 4 mm dia. by means of bolts, nuts check nuts and washers of galvanised steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8 mm dia. MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing medium grade for protection of earth lead connection, necessary excavation and earth work in any type of soil complete all as specified and indicated on electrical plate No 3 of SSR Part –I (2009) including testing on completion.

M/S Mandeep Singh

M/S A K MITRA

SHRI D. C. BISWAS

M/S P.C. SERVICES

Singhs Construction

M/S Kangkans

Evergreen Firm