Maintenance and Repairing work of Distributaries MD-13 to MD-15 & its Minors of Maliya Branch Canal for Year 2026-27

BILL OF QUANTITIES

BILL OF QUANTITIES

1. The bill of Quantities shall be read in conjunction with the Instructions to Bidder,

Conditions of Contract, Technical Specifications and Drawings.

2. The quantities given in the Bill of Quantities are estimated and provisional and

are given to provide a common basis for bidding. The basis of payment will be the

actual quantities of work ordered and carried out, as measured by the Contractor

and verified by the Engineer and valued at the rates and prices tendered in the

priced Bill of Quantities, where applicable, and otherwise at such rates and prices

as the Engineer may fix within the terms of the Contract.

3. The rates and prices tendered in the priced Bill of Quantities shall, except in so far

as it is otherwise provided under the Contract, include all construction plant,

layout, supervision, materials, erection, maintenance, insurance, profit, taxes and

duties, together with all general risks, liabilities and obligations set out or implied

in the Contract.

4. The rates and prices shall be quoted entirely in Indian Currency.

5. A rate or prices shall be entered against each item in the Bill Quantities, whether

quantities are stated or not. The cost of Items against which Contractor has failed

to enter a rate or price shall be deemed to be covered by other rates and prices

entered in the Bill of Quantities (in case of Item rate contract).

6. The whole cost of complying with the provisions of the Contract shall be included

in the items provided in the priced Bill of Quantities, and where no Items are

provided the cost shall be deemed to be distributed among the rates and prices

entered for the related items of Work.

7. General direction and descriptions of work and materials are not necessarily

repeated or summarized in the Bill of Quantities. References to the relevant

sections of the contract documentation shall be made before entering rates or

prices against each item in the Bill of Quantities.

8. The method of completed work of payment shall be in accordance with the

specification for Canal work Road and Bridge works. For building works

specifications for building are to be followed.

9. Errors will be corrected by the Employer for any arithmetic error pursuant to

Clause 29 of the Instructions to Bidder.

10. Rock is defined as all materials which, in the opinion of the Engineer, required

blasting, or the use of metal wedges and sledgehammers, or the use of

compressed air drilling for its removal, and which cannot be extracted by ripping

with a tractor of at least 150 KW with a single rear mounted heavy duty ripper.

BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 Cr.)

Name of Work :- "Maintenance and Repairing work of Distributaries MD-13 to

MD-15 & its Minors of Maliya Branch Canal for Year 2026-27"

No. Description of Item Qty. Unit Rate in Rs. Amount in Rs.

Jungle clearance of specified category and

bushes for canal/Dam work as directed with

disposing material etc completed.(Excluding

1 tree of grith above 0.5 mt )

(B) more than 2 years old (c) for heavy

Earthwork / Back filling with selected earth

brought from outside borrow area or from

2 excavated useful material including watering 3759.60 Cum 141.00

ramming, Compaction with pneumatic

temping and all lead and lift etc complete

Clearing the silt from canal/drain bed by digging

the same to the required bed level and gradient

including depositing the excavated earth

regularly on spoil bank for utilizing the same for

3 preparing the bund after bracking the clods as

and where directed for lead upto 30 mt and lift

as under. (Excluding weed cutting) (A) Depth

Dismantalling the C.C. Lining including disposing

of the dismentalled materials as directed etc.

4 Complete. (a) 7.5 cm Thick

Providing and Laying HDPE Geomembrane in

bed and slopes of canal at required level below

lining as per drawing and as directed etc.

5 complete. 34443.45 Sqmt 50.90

(a)200 micron a)Type-I For smooth

Providing and fixing welded wiremesh 1.8 mm x

6 65mm x 65 mm with 30 gsm galvanized coating 34443.45 Sqmt 85.80

confirming to IS 280 -2006 as per specification

Providing and laying in position Nominal Mix

Plain/Reinforced Cement Concrete Lining of

1:2:4 using cement, sand and crushed aggregate

in Bed, Side Slopes and Curvature including

batching, mixing, transporting, placing, vibrating,

smooth finishing, membrane curing (By Curing

Compound Only) as directed with all lead & lift

7 etc. Complete including dressing the bed and

trimming the canal section and minor filling with

murrum/earth as per site condition to correct

profile incl. providing bitumen joints at specified

interval. (Without Using Paver Machinaries &

without sleepers) For 7.50 cm thick canal lining

..................... %above/below percent (Should

be written in figures and words) of the estimated rate mentioned above. Amount of my /our

tender works out as under.

Estimated amount put to tender Estimated amount put to tender

In words In words

(B) For Item Rate Tender (ForaboveINR50Cr.):

Item Description of Quantity Unit Rate Amount

No Item(with brief

specification and In In

reference to book of figures Words

specifications)

(A)Total Tendered Amount

(C)Net Tendered Amount (A-

1 The Contractor shall exhibit a board with detailed specification and details of work as

directed by the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1%of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all P.C.C./R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken

as per vernacular office letter no. 04 of 2024, Dt. 20/01/2024 of The Chief Engineer,

Quality Control (SSNNL) as stated in S.O.R. therefore in P.C.C./R.C.C. items where there is

a change as per Nominal mix the cost of difference of cement consumption have been

deducted from the rate of original item at the rate of input rate (i.e. 5448.53 Rs / MT for

OPC) mentioned in all the tender