Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.5 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | l2₹4.6 L+₹1,523.86 (0.34%)Rejected-AOC | l2 | Rejected-AOC L2 | |
| 3 | Rejected-Technical | - | Rejected-Technical L3 |
| Sl No | Description | Qty | Unit | SYAMLAL. D L3 | KS DAS L2 | HABEEB H L1 |
|---|---|---|---|---|---|---|
| 1.00RENOVATION WORK | ||||||
| 1.00 | 50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete | 16.38 | cum | 7,200 ₹1,17,936 | 6,536.57 ₹1,07,069.02 | 6,514.73 ₹1,06,711.28 Lowest |
| 1.00 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 174.72 | sqm | 367 ₹64,122.24 | 332.04 ₹58,014.03 | 330.94 ₹57,821.84 Lowest |
| 1.00 | 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | 174.72 | sqm | 80 ₹13,977.6 | 72.6 ₹12,684.67 | 72.36 ₹12,642.74 Lowest |
| 1.00 | 13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 174.72 | sqm | 172.88 ₹30,205.59 | 155.25 ₹27,125.28 | 154.73 ₹27,034.43 Lowest |
| 1.00 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 939.36 | kg | 155 ₹1,45,600.03 Lowest | 160.22 ₹1,50,503.46 | 159.69 ₹1,50,005.6 |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 89.88 | sqm | 160 ₹14,380.8 | 148.04 ₹13,305.84 | 147.55 ₹13,261.79 Lowest |
| 1.01 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 284.09 | kg | 198 ₹56,249.82 Lowest | 207.38 ₹58,914.58 | 206.68 ₹58,715.72 |
| 1.01 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 73.26 | kg | 178 ₹13,040.28 | 167.97 ₹12,305.48 | 167.4 ₹12,263.72 Lowest |
| 1.01 | OD471333/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with
zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy
primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have
protective guard film of 25 microns minimum to avoid scratches during transportation and
should be supplied in single length up to 12 meter or as desired by Engineer-in-charge. The
sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal,
complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins,
rafters and trusses and including cutting to size and shape wherever required. | 25.74 | per sqm | 580 ₹14,929.2 | 523.41 ₹13,472.57 | 521.5 ₹13,423.41 Lowest |
Tender Value
₹5.1 L
EMD Value
₹12,692
Closing Date
12 Mar 2026, 3:00 pmClosed
Hema S
LID EW AE Office Thrikkunnapuzha GP
TGP 54/26 E Tender Infrastructural Development Of Pallana LPS
2026_LSGD_843923_1
01/2026/AE/LIDEW/TKPZA
Open Tender
Civil Works - Buildings
Item Rate
180 days
Thrikkunnapuzha GP
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,120
Yes
₹12,692
Yes
11 Jun 2026
5 Mar 2026
13 Mar 2026
5 Mar 2026
12 Mar 2026
5 Mar 2026
RENOVATION WORK
50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
OD471333/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 meter or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
OD471334/2025-2026:providing and fixing pre coated galvanized steel sheet roofing accessories .35mm(+0.05%) total coated thickness zinc coating
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1424674.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.05 MB
FOT54.pdf
Tender Documents • 0.25 MB
PAG54.pdf
Tender Documents • 0.26 MB
AFFIDAVIT54.pdf
Tender Documents • 0.24 MB
SBD54.pdf
Tender Documents • 0.91 MB
PACT.pdf
Other Document • 0.23 MB
EPAY.pdf
Other Document • 0.23 MB
BOQ_1424674.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .