Construction of new 11 KV line for transferring load of 11 KV Rajendranagar Feeder on 11 KV Yamuna Feeder of 33/11 KV S/s Govindgarh.

Amount

DECENTRALIZE MATERIAL

MS NUT & BOLT OFF SIZE

Cable Holding clamp with N&B

PP & CLAMP WITH N&B ST POLE SP-55

STAY CLAMP FOR ST POLE WITH NUT BOLT

PP & CLAMP WITH N&B ST POLE SP-23

GI Pipe 4'" Dia

HDPE PIPE 140mm

11kV XLPE HS CABLE J/K 3X300mm² STRAIGHT

11KV CABLE T/K 3X300mm² XLPE I/D

11KV CABLE T/K 3X300mm² XLPE O/D

11KV O/D RMU 3 WAY TYPE

AL. CRIMPING TYPE LUGS 150 SQ.mm

AL. CRIMPING TYPE LUGS 240 SQ. mm

LABOUR CHARGES

Making Special type separate earthing for neutral /body of Power transformer by digging 3x4x12 feet deep pit at corner of Swithchyar d with duly provided 1 No. coal Iron earth plates of size 18''x18''x½'' jointing them with 6'' long bolt duly coverod wit

Earthing of support with M.S. Earth rod of 2.5 meter long by hammaring of M.S. Rod to proper depth and connecting the earth electrod e with the help of G.I. wire as per construction manual.

Fabrication of MS Channel angle iron etc in required sizes with drilling of holes upto good finish for top channel ,bracing and spec ial type bracket etc. as per RESPO schedule and local approced drawing.

Fixing of GI pipe.

Fixing of RCC cable route marker Including cost material

Excavation of earth for stay pit of size 0.6x0.6x1.2 mtr in all types of soil including proper dressing of sides and ramming of bott om including getting out the excavated soil and disposal of surplus excavated soil as directed complete work

Fixing,tightening and nozzling of stay with pole and stay rod on required tension as per drawing/manual in 11 KV Line

Grouting of Stay in size 0.6x0.6x0.3 in CC ratio 1:4:8 (1 cement : 4 graded stone 20mm nominal size : 8 coarse sand ) block includ ing cost of Cement,sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, lev

Excavation of earth for pole pit of size 0.9x0.6x1/6 of full length of pole for erection of pole in all types of soil including prop er dressing of sides and ramming of bottom including etting out the excavated soil and disposal of surplus excavated soil

Erection of SP-23 single support pole in proper level and alignment along with fixing of all accessories like top channel,& clamps a s per RESPO manual

Grouting of pole in size 0.45x4.45x1/9 of the support in CC ration 1:4:8(1 cement:4 graded stone20 mm niminal size: 8 coarse sand) b lock including cost of cement, sand and stone ballast back filling of soil and boulders in pit and ramming and proper ali

Muffing of poles size 0.45x0.60 cm radius with 1:3:6(1 cement:3 coarse sand :graded stone 10 mm nominal size) block size 45 cm heigh t from ground level including cost of cement,stone and sand etc.

Dismantling of existing HT line. including disc fitting, Insulator, clamps, Nut & Bolts and consumer connections and Street light co nnections etc. including rolling of conductor and cartage back from site to JE store(ACSR Weasel)

Laying of 11KV Cable in 1.5 mtr depth with suitable trencheless technology including laying in trench with providing & fixing of HDP E pipe PE 80 PN 6 & having dia 160 mm conferming to IS 4984/1995 & having thickness 9.1 to 10.3mm.

Providing and fixing of Danger Board and number plate complete by providing clamps of M.S. Flat 50x6 mm and Nuts & Bolts, danger Boa rds of M.S. Sheet 2 mm Thick 11''x7'' size (Including cost of all material)

Making of section pole for existing LT/HT/33KV line complete in all respect.

Jointing and fixing of cable jointing kit indoor/outdoor 11 KV XLPE heat shrinkable cable boxes

Jointing and fixing of cable jointing kit straight thru 11 KV XLPE heat shrinkable cable boxes

Cartage of ST pole SP-21/23 Poles from store centre to construction site with loading, unloading at both points and proper stacking. (Distance 0-20 Km)

Cartage of other material (other than poles) by vehicle from Store Center to nearest construction site Store including loading and u nloading at both ends(distance 0-20 Km)

Headload cartage of SP-21/23 Pole from road to site(distance 0-1 Km)

Head load cartage of small material(distance 0-1 Km)

Fixing,tightening and nozzling of stay with pole and stay rod on required tension as per drawing/manual in 11 KV Line

SAGGING/RESAGGING OF ACSR HT LINE

MAKING PIT OF SIZE 5X2X1.2 MTR FOR FILLING AND FIXING OF STRAIGHT THROUGH JOINT KIT WITH BAG FILLING RAMMING AND COMPACTION UPTO COMPLETE RESTORATION.

Fixing of 11KV double pole accessories (Top channel 01no., gaurding angle 01no., cable angle 02no. Or 02 No. cable angle on existing four pole)

Disconnection & Reconnection of 11/33 KV Cable Complete.

FIXING OF ACCESSORIES

HIPOT CABLE TESTING BEFORE ENERGIZING

OPENING & MAKING OF JUMPHER OF SECTION POLE

FIXING OF MS CHANNEL, ANGLE AND ALL ACCESSORIES ON EXISTING/NEW DOUBLE POLE

Shifting of 11 KV RMU With help crane

INSTALLATION OF 3 WAY RMU AND OTHER WORK

MAKING OPEN TRENCH IN ROCKY AREA INCLUDING LAYING OF CABLE IN TRENCH

LAYING OF 11 KV CABLE

PAINTING OF SINGLE POLE (SP-23)

MAKING OF CONN. OF 11KV CABLE AT CSS/RMU/PANNEL

MAINTENANCE OF BUSBAR

P M ELECTRICAL COMPANY (BID ID -356535)

M/S R. B. ELECTRICALS (BID ID -356417)

RJ ENTERPRISES (BID ID -356567)