Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹4.9 LAccepted-Finance BILASPUR | BILASPUR | CHHATTISGARH | 495001 | ₹4.9 L | 1 | Accepted-Finance L1 |
| 2 | 2₹5.1 L+₹22,497 (4.58%)Rejected-Finance V P O DARINI TEHSIL SHAHPUR HIMACHAL PRADESH 176206 | DARINI | KANGRA | HIMACHAL PRADESH | 176206 | ₹5.1 L+₹22,497 (4.58%) | 2 | Rejected-Finance L2 |
| 3 | 3₹5.2 L+₹26,094 (5.31%)Rejected-Finance R O BRAGTA BHAWAN CHOTTA SHIMLA | SHIMLA | HIMACHAL PRADESH | 171001 | ₹5.2 L+₹26,094 (5.31%) | 3 | Rejected-Finance L3 |
| 4 | Rejected-Technical | - | - | Rejected-Technical Reject |
| Sl No | Description | Qty | Unit | Deep Ram L3 | Ravinder Singh Patial L1 | Akshay Kumar L2 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation trenches etc. in earth work in all kinds of soil such as pick work, jumper work, blasting work in soft/hard rock, chiseling wedging out of rock where blasting in prohibited saturated soil including bailing / pumping out of water, stacking the excavated soil in all leads and lifts clear from the edge of excavation and then returning the stacked soil in 15cm layers, when required into sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within all leads and lifts. | 355.88 | Cum | 450 ₹1,60,146 | 400 ₹1,42,352 Lowest | 425 ₹1,51,249 |
| 2.00Laying jointing and testing in trenches HDPE pipe of following diameter and classes as per IS: 4984-1995 grade PE-80 class PN-4.00 and jointing the pipes through push type compression joints by hydraulically operated machine complete with butt (heat) fusion welded joints with necessary fittings such as bends, tees, reducers etc. fabricated in accordance with IS: 8360 and IS: 8008 with latest amendements and shall be provided as per site conditions. The flanging of the pipes shall be made as and where required conforming to IS: code 8008 and 7634, stud ends shall be fussion welded on pipes & flanges shall be provided with slip on covered by epoxy coating / plastic powder. The flanges should be conform to ANSI B 16.5 with necessary nuts and bolts (Earth work in trenches to be measured and paid for separately) in all leads and lifts and to the entire satisfaction of the Engineer-in-charge. | ||||||
| 2.01 | 90 mm dia HDPE pipe P-80 PN-4.00 | 100 | Rmt | 360 ₹36,000 | 340 ₹34,000 Lowest | 350 ₹35,000 |
| 2.02 | 110 mm dia HDPE pipe P-80 PN-4.00 | 630 | Rmt | 510 ₹3,21,300 | 500 ₹3,15,000 Lowest | 520 ₹3,27,600 |
Tender Value
₹4.7 L
EMD Value
₹9,430
Closing Date
12 Aug 2026, 11:00 amClosed
Executive Engineer
Jal Shakti Division Bilaspur
Restoration of rain damages of LIS Harnoda Deola Chhamb in Tehsil Sadar District Bilaspur (SH Providing laying jointing and testing of HDPE pipe of various dia).
2026_HPIPH_140357_3
BLP-BLP-0736-NIT No. 6894-6995 Dated 30/07/2026
Open Tender
Civil Works
Item Rate
365 days
Sub Division Bilaspur Section Panjgain
Please refer Tender documents.
4 documents required · 4 mandatory
₹350
₹9,430
30 Aug 2026
3 Aug 2026
12 Aug 2026
3 Aug 2026
12 Aug 2026
3 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in foundation trenches etc. in earth work in all kinds of soil such as pick work, jumper work, blasting work in soft/hard rock, chiseling wedging out of rock where blasting in prohibited saturated soil including bailing / pumping out of water, stacking the excavated soil in all leads and lifts clear from the edge of excavation and then returning the stacked soil in 15cm layers, when required into sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within all leads and lifts. | 355.88 | Cum | 108 | ₹38,435.04 |
| 2Laying jointing and testing in trenches HDPE pipe of following diameter and classes as per IS: 4984-1995 grade PE-80 class PN-4.00 and jointing the pipes through push type compression joints by hydraulically operated machine complete with butt (heat) fusion welded joints with necessary fittings such as bends, tees, reducers etc. fabricated in accordance with IS: 8360 and IS: 8008 with latest amendements and shall be provided as per site conditions. The flanging of the pipes shall be made as and where required conforming to IS: code 8008 and 7634, stud ends shall be fussion welded on pipes & flanges shall be provided with slip on covered by epoxy coating / plastic powder. The flanges should be conform to ANSI B 16.5 with necessary nuts and bolts (Earth work in trenches to be measured and paid for separately) in all leads and lifts and to the entire satisfaction of the Engineer-in-charge. | |||||
| 2.01 | 90 mm dia HDPE pipe P-80 PN-4.00 | 100 | Rmt | 108 | ₹10,800 |
| 2.02 | 110 mm dia HDPE pipe P-80 PN-4.00 | 630 | Rmt | 108 | ₹68,040 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.31 MB
PWD6.pdf
Tender Documents • 0.40 MB
PWD8.pdf
Tender Documents • 1.32 MB
TC.pdf
Tender Documents • 0.35 MB
BOQ_208189.xls
BOQ • 0.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .