Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.0 LAccepted-AOC | L1 | Accepted-AOC Being lowest bidder. | |
| 2 | L2₹32.5 L+₹4.1 L (14.4%)Rejected-AOC | L2 | Rejected-AOC Being other than lowest bidder. | |
| 3 | L3₹33.5 L+₹5.0 L (17.7%)Rejected-AOC 578 AVAS VIKAS JANAKPURI B IZATNAGAR BAREILLY 243122 UP | BAREILLY | UTTAR PRADESH | 243122 | L3 | Rejected-AOC Being other than lowest bidder. | |
| 4 | L4₹34.0 L+₹5.5 L (19.4%)Rejected-AOC | L4 | Rejected-AOC Being other than lowest bidder. | |
| 5 | L5₹34.4 L+₹5.9 L (20.9%)Rejected-AOC C 247 1 RAJINDRA NAGAR BAREILLY 243122 UP | BAREILLY | UTTAR PRADESH | 243122 | L5 | Rejected-AOC Being other than lowest bidder. |
Tender Value
₹37 L
EMD Value
₹74,000
Closing Date
13 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE EAST BAREILLY
Garrison Engineer East Military Engineer Services Shahjahanpur Road Bareilly Cantt
REPAIR TO HARDSTANDING AND MISC B/R WORKS AT BAREILLY STN UNDER GE (EAST) BAREILLY.
2024_MES_666937_1
8371/E8
Open Tender
Civil Works
Item Rate
245 days
BAREILLY
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE EAST BAREILLY
₹74,000
Yes
26 Dec 2024
20 Jul 2024
16 Sept 2024
20 Jul 2024
13 Sept 2024
3 Aug 2024
20 Jul 2024 - 27 Jul 2024
Amount
Dismantling posts or struts (wood, steel or RCC) any section including taking out embedded portion and making good disturbed ground post embedded in concrete, brick work, masonry etc complete all as specified and directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness below or above ground level complete all as specified and directed.
Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified and directed.
Surfacing excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.
M&L for brick work with fly ash bricks old size bricks in cement mortar, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified as directed.
M&L 15mm thick in CM 1:4 rendering on fair faces of brick work is to be finished even and smooth (without using extra cement) complete all as specified as directed.
M&L Providing cement concrete 1:2:4, type B1 (using 20 mm graded crushed stone aggregate) in surface channels and drains complete all as specified as directed
M&L for PCC 1:2:4, type type B1 (using 20 mm graded crushed stone aggregate) for copings on brick wall surfaces including weathering, slightly rounded or chamferred angles and throating, as directed.
M&L 75 mm thick PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base floor / pavings complete all as specified and directed
M&L 25 mm thick PCC 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in floors, surfaces finished fair and even complete all as specified and directed.
M&L in repairs for factory made machine pressed pre-cast concrete interlocking coloured paver block, Glossy finish and shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment laid dry over and including 50 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed.
M&L in repairs for factory made machine pressed pre-cast concrete interlocking coloured paver block, Glossy finish and shape and size conforming to IS-15658-2006 of 80mm thickness M-40 grade with grey cement and pigment laid dry over and including 50 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed.
M&L in repairs for factory made machine pressed pre-cast concrete interlocking coloured paver block, Glossy finish and shape and size conforming to IS-15658-2006 of 100 mm thickness M-50 grade with grey cement and pigment laid dry over and including 50 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed.
M&L in repairs factory made machine pressesd pre-cast cement concrete 1:2:4, type B1 (using 20mm graded crushed stone aggregate) kerb stone including weathering, slightly rounded or chemferred angles and throating complete all as specified.
M&L for 40 mm thick PCC 1:2:4, type B1 (using 20mm graded crushed stone aggregate) as in floors to receive surface of tile complete all as specified and directed.
M&L in repairs for factory made machine pressesd coloured glazed chequered cement concrete of size 25x25cmx25mm thick, Glossy finish with mixture of grey and white cement in equal proportions and no pigment set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including screed bed or bedding layer of mortar 20 mm thick, in cement mortar 1:6, complete all as specified and directed.
M&L for cement concrete 1:3:6, type C-2 (using 20mm graded crushed stone aggregate) in foundation and filling around fencing post complete all as spd & directed .(Deduction for the portion of fencing post/strut embeded in concrete shall be made) complete all as specified and directed.
M&L for PCC 1:2:4 type B-2 (using 20 mm graded stone aggregrate) mass concrete as in embadded 15 cm below, below up to 200 mm from above GL (from work paid seperately) for fixing chain link fencing complete all as specified and directed.
S&F in repair MS steel work in tubular trusses for sign board posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St.-240, complete all as specified and directed.
S&F in repair Pre-coated galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified.
M&L for cement concrete type A 2, M-20 graded 20 mm graded coarse stone aggregate (nominal mix) as in floor, concrete surfaces finished fair even laid in bays n.exc 2 m in length & joints filled with and including alminium strip 50mm high complete all as specified and directed.
S&F in repairs pre-painted galvalume aluminium zinc coated GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
M&L for 75mm thick PCC 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed.
M&L for preparing newly plastered walls surfaces and applying two coats of cement base paint over a coat white wash complete all as specified and directed.
M&L preparation new or previously untreated steel surfaces of any description over n.exc 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed.
M&L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of syntetic enamel paint over one coat of red oxide or zinc chrome primer complete all as specified and directed.
M&L for new or previously treated surfaces on kerb stone applying one coat of Kerb Painting Kerb stone painting with glossy paints for day and night visibility, with different color combinations Black/White or Yellow/Black over one coat of Priming paints coat of any description complete all as Spd and directed
Vasundhra Enterprises (BID ID -3095265)
UTTRAKHAND BUILDERS (BID ID -3095201)
M/S SAJJAD HUSSAIN CONTRACTOR (BID ID -3092784)
M/S Gupta Builders (BID ID -3085210)
N N ENTERPRISES (BID ID -3095192)
shiv shakti contractor (BID ID -3088386)
RIYASAT ALI KHAN (BID ID -3095231)
M/S ARORA ENTERPRISES (BID ID -3091253)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .