Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.5 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED BEING LOWEST QUOTED | |
| 2 | L2₹21.1 L+₹3.1 L (17.4%)Rejected-AOC 274 210 DAFNALA ROAD SHAHIBAUG AHMEDABAD GUJARAT 380009 | AHMADABAD | GUJARAT | 380009 | L2 | Rejected-AOC NOT ACCEPTED DUE TO HIGHER RATE QUOTED | |
| 3 | L3₹21.8 L+₹3.8 L (21.3%)Rejected-AOC | L3 | Rejected-AOC NOT ACCEPTED DUE TO HIGHER RATE QUOTED |
Tender Value
Refer Docs
EMD Value
₹39,600
Closing Date
3 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ARMY GANDHINAGAR
GE GANDHINAGAR PO BSF CAMPUS GANDHINAGAR 382045
REPAIRS TO BR WORKS FOR ZONE 5 AT MIL STN GANDHINAGAR
2022_MES_544492_1
GE(A)/GNR/TOKEN/49 of 2022-23
Open Tender
Civil Works
Item Rate
120 days
MIL STN GANDHINAGAR
AS PER TENDER DOCUMENTS
6 documents required · 6 mandatory
₹500
Yes
GE ARMY GANDHINAGAR
₹39,600
Yes
29 Oct 2022
10 Aug 2022
5 Sept 2022
10 Aug 2022
3 Sept 2022
22 Aug 2022
10 Aug 2022 - 20 Aug 2022
Amount
M&L for 35mm thick, precast cement concrete 1:2:4, Type B-0 using 12.5mm graded stone aggregate as in louvers and jallies, (measured solid) including all mouldings and precast cement concrete 1:2:4 type B-0, pillars/supports to jallies, set in cement mortar 1:4 complete including taking down old Jallies all as specified and directed.
M&L for fly ash Brick work with old size, sub class 'B' bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for fly ash Brick work with old size, sub class 'B' bricks, straight or curved on plan any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.
Cutting chases, pinning in, for brick walls, making good to facings for concealed water tubing etc. cutting exceeding 10cm but not exceeding 20cm girth complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sq.m but not exc. 4 sq.m each complete all as specified and directed.
Taking down chowkhat or frames exc 1.5 sqm but n exc 4 sqm each complete all as specified and directed
Taking down old shutters of any description exc. 1 sqm but not exc. 2 sqm each complete all as specified and directed.
Taking down old shutters exc. 2 sqm each complete all as specified and directed.
Refixing in same opening shutters of any description exc 1 sqm and n exc 2 sqm complete all as specified and directed
Refixing in same opening shutters of any description exc 2 sqm complete all as specified and directed
Resecuring or easing & adusting without taking down of shutters exc 1.0sqm and n.exc 2.0sqm and adjusting with out taking down
S&F, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed.
S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specifications complete all as specified and directed.
S&F, 35 mm thick, 2nd class hard wood, factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed.
S&F, factory made, 30mm thick, flush shutters, solid core construction, with block board core and plywood face panles, commercial type on both sides complete all as specified and directed.
S&F, 35 mm thick 2nd class hard wood plain framed panelled shutter (two panel) with lock rail and panel of 12 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part -I), Klin seasoned and chemically treated and complete all as specified and directed.
S&F, in repairs, 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice laminations and other side balanceing white lamination, fixed with screws to timber frame work in cup boards, rebated or flat edged complete all as specified and directed.
M&L for 6mm thick external teak wood lipping fixed to18/19mm thick prelaminated particle boards with screws.
S&F, single action spring hinges (ISI MarK), mild steel with steel wire spring, stove enameled black, size of spring hinge 150mm all as specified and directed.
S&F, in repair, single action spring hinges (ISI MarK), mild steel with steel wire spring, stove enameled black, size of spring hinge 150mm all as specified and directed.
S&F, stainless steel butt hinges of size 100mm complete all as specified and directed.
S&F, butt hinges, medium weight, cold rolled, mild steel of size 100 mm complete all as specified and directed.
S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed
S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed
S&F, in repair aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed
S&F, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete all as specified and directed.
S&F, in repair aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete all as specified and directed.
S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.
S&F in repair extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.
S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor
S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor
S&F, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
Hacking out old broken glass ( any thickness ) size or description from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.
S & F 3 mm thick plain sheet glass, ordinary quality and glazing not exceeding 0.5 Sqm in each pane fixed to steel window with glass putty complet all as specified and directed.
S&F, 4mm thick, black tinted glass panes fixed to aluminium doors/windows/vents with necessary rubber gaskets complete all as specified and directed.
Taking down steel window/ventilator including grills of any description, n. exc 1.5 Sqm each complete all as specified and directed
Taking down Aluminium doors/window/ventilator of any description complete all as specified and directed
Taking down aluminium door shutter, resecuring shutter at joint by cleats/screws fixing of horizontal ms screwed bars for strengthening, replacement of pivots, floor door spring, hydraulic door closer, mortice lock etc. complete all as specified and directedNote : Replacement item shall be paid seperately
S&F in repair brass four levers mortice lock, vertical type size 100 mm complete all as specified and directed
S&F, Mortice lock, brass, four lever, verticle type, size 100mm complete all as specified and directed.
Supply only Mild steel screwed bar 5 to 6 mm dia length of bar equal to width of door shutter (machine made) with hexagonal and screwed at both end to top fitted with washers and hexagonal or square nut complete all as specified and directed
Supply only Mild steel door pivot suitable for aluminium door frame & shutter complete all as specified and directed
S&F in repair cast iron body hydraulic door closer hydrualically regulated designation No 3, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed
S&F solid PVC wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing complete all as specified and directed
S&F 5 mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed
M&L double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed
M&L for mild steel framed work such as grills, gratings, etc. with ends of bars, shouldered and/or riveted, or forged into spikes, framed guard bars etc and similar work conforming to Fe-290 (Gde-E-165) complete all as specified and directed
M&L for rolled mild steel angle iron work as in door frames complete, drilled for fixing of hinges etc. also fastening and fixing conforming to Fe-290 (Gde-E-165) complete all as specified and directed.
S&F mild steel work in weather shed posts, main and cross beams, hip and jack rafters, purlins, including special shaped washer etc. complete using ERW or induction butt welded tubes, conforming to IS 1161-1979, Gde St-240 complete all as specified and directed.
S&F, Aluminium anodised sections for doors/windows/ventilators with one or more rebates including joining cleat for fixing etc complete with frames, shutters and grills of size directed by Engineer-in-charge including handles, tower bolts, grills, etc complete all as specified and directed. Note:- Floor door spring, sheet glass, wire cloth, lock, etc shall be measured and paid seperately.
S&F, in repairs, 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with screws complete all as specified and directed.
S&F, in repair, pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L for machine cut kota stone slab, 450x600mm ( 18"X24"), 20-25mm thick as in flooring laid over and including cement mortar screed bed of 15mm thick in CM (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L for machine cut kota stone slab 20-25 mm thick as in riser of steps, skirting, dado and pillar laid over and including rendering 10mm thick in cement mortar (1:4), jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L 16 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite
Providing edge moulding to granite18-20mm thick stone of counters vanities etc. cluding machine polishing to edge to give high gloss finish etc. complete
M&L for 75mm thick cement concrete 1:3:6 type C1, using 40mm graded stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement, Joints of plinth protection shall be filled with bitumen mastic (1:3) complete all as specified and as directed.
M&L for 75 mm thick cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of flooring/hard standing and finishing the surface even and fair without using extra cement complete all as specified and directed.
M&L for 40mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floors and finishing the top surface even and smooth without using extra cement complete all as specified and directed.
M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in flooring finished fair and even to receive floor finishes complete all as specified and directed.
M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc. set & jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 complete as specified and directed.
M&L for coloured non skid ceramic tiles, 7 to 8 mm thick, (square/rectangular), area of each tile exceeding 0.18 sq.m but not exceeding 0.38 sq.m as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed or bedding layer of 15 mm thick in cement mortar (1:6) complete all as specified and directed.
M&L for coloured non skid ceramic tiles, 7 to 8 mm thick, (square/rectangular), area of each tile exceeding 0.18 sq.m but not exceeding 0.38 sq.m as in Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed or bedding layer of 15 mm thick in cement mortar (1:6) complete all as specified and directed.
M&L for light shade, vitrified tiles, 10mm thick, (square/ rectangular polished, area of each tiles exceeding 0.36 Sqm (including 600mmx600mm size) but not exceeding 0.42 Sqm, in flooring set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and laid over and including 15mm thick screed bedding in CM 1:6 complete all as specified and directed.
M&L for light shade, vitrified tiles, 10mm thick, (square/ rectangular polished, area of each tiles exceeding 0.36 Sqm (including 600mmx600mm size) but not exceeding 0.42 Sqm, in Skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and laid over and including 10mm thick screed bedding in CM 1:4 complete all as specified and directed.
M&L for glazed ceramic coloured tiles any coloured / shed of size 450mm x 300mm x 7mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including rendering 10mm thick in cement mortar (1:4) , complete all as specified and directed.
M&L for heavy duty, exterior grade vitrified tiles (Durastone of Somany/Endura of jhonson or equivalent as approved by GE) of size 300 x300x 10mm thick, as in skirting/dado, risers and verticle surfaces, set,jointed and pointed in neat cement slurry with white cement and pigment over and including screed bed or bedding layer of 10mm thick cement mortar (1:4) complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.
M&L for rendering cement plaster 10mm thick in cement mortar (1:6) on brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering cement plaster 15mm thick in cement mortar (1:4) on brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering cement plaster 5mm thick in cement mortar 1:3 on fair faces of concrete in ceilings, chajjas, fins facia etc. finished even and smooth without using extra cement complete all as specified and directed.
M&L for cutting uneven surfaces of concrete & cutting reinforcement from drops of fins & facias (thickness not exceeding 50mm) using necessary scaffolding and making good the disturbed portion with 5mm thick rendering in CM 1:3 finished even and smooth without using extra cement etc. complete all as specifeid and directed.
Taking down cement plaster on brick or stone wall etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
M&L for preparing new plastered or un-plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.
M&L for preparing new plastered or un-plastered surfaces and applying two coats of oil bound distemper over a coat of chalk whitining on walls complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of white cement as primer complete all as specified and directed.
S&F, in repairs, 17 mm thick, solid PVC sheet of approved texture as in Kitchen cabinet complete all as specified and directed.
S&F, 01mm thick, PVC lamination sheet of approved colour & make fixed as ward robe shutter / Kitchen cabinet complete all as specified and directed by Engineer -in Charge.
S&F, 05 mm thick, hallow PVC sheet of approved texture as in back support of Kitchen cabinet complete all as specified and directed.
S & F 15X20X4 Inch stainless steel kitchen basket with stainless steel wire perforate plate fabricated and stainles steel telescopic drawer chanel with ball bearing soundless complete all as specified and directed
S&F, stainless steel auto closing concealed hinges 9.5 crank for half overlay door with 95 degree opening angle, 14-32 mm zink complete all as specified and directed.
S&F, 75 mm long capsule D stainless steel drawer cabinet handle complete all as specified and directed
S&F, 1.77X 0.59 inch magnet for kitchen cabinet handle complete all as specified and directed
S&F, in repair, false ceiling, at any height, 600 x 600mm grid with Armstrong 'Prelude XL 32' grid system and 16mm thick mineral fibre acoustic tile 'RH - 99 Classic lite' with suspension system complete all as specified and per manufacturer's instruction.
M&L for preparation of new wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.
Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed.
Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed.
Taking up or down steel tubing and connections for 25mm bore of pipe complete all as specified and directed.
S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 20mm bore of pipe complete all as specified and directed.
S&F of 20 mm outer dia CPVC elbow with brass thread at one end for fixing of taps etc and other end plain complete all as specified
S&F of 20 mm outer dia CPVC Tee with brass thread at one end for fixing of taps etc and other end plain complete all as specified
S&F of 20 mm outer dia CPVC adopter with female brass thread at one end for fixing of taps etc and other end plain complete all as specified
S&F of 20 mm outer dia CPVC tank adopter complete all as specified
S&F of 20 mm outer dia CPVC union complete all as specified
Supply and laying of 20 mm outer dia CPVC pipe SDR 11 fitting on walls /ceiling or laying in floors including connection to old GI pipe if required complete all as specified
S&F of 20 mm outer dia CPVC tank adopter complete all as specified
S&F of 20 mm outer dia CPVC union complete all as specified
S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 25mm bore of pipe complete all as specified and directed.
Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 15mm bore of pipe complete all as specified and directed.
Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 20mm bore of pipe complete all as specified and directed.
Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 25mm bore of pipe complete all as specified and directed.
S&F, in repair, 40mm bore, low density polyethelene pipe (LDPE) of pressure rating 6kgf/sq.cm fixed to walls, ceilings or in floors etc. complete all as specified and directed.
S&F,in repair brass chromium plated, tubular towel rail 20mm dia, D type, 600mm long complete all as specified and directed.
S&F, in repair, pillar taps,15mm bore , cast copper alloy , chromium plated complete all as specified and directed.
Supply, hoisting, fixing in position and connecting, in repairs, 500 litres capacity rotational moulded polyethylene water storage tank double layered (cylindrical, vertical with closed top), ISI marked,including dismantling of old PVC/AC tanks of 500 litre capacity and fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and directed. Note- The water tank etc shall be contractor's supply.
Supply, hoisting, fixing in position and connecting, in repairs, 1000 litres capacity rotational moulded polyethylene water storage tank double layered (cylindrical, vertical with closed top), ISI marked, including dismantling of old PVC/AC tanks of 1000 litre capacity and fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and directed. Note- The water tank etc shall be contractor's supply.
S&F in repair Gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe for 25 mm bore of pipe complete all as specified and directed.
S&F in repir Gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe for 20 mm bore of pipe complete all as specified and directed.
S&F, in repair, 25 mm dia, 1 mm wall thickness stainless steel fancy type, decorative curtain rod complete all as specified and directed.
S&F, 130 mm long (10X1 mm) curtain bracket to support for curtain rod pipe fixed with rawl plug complete all as specified and directed.
S&F, decorative type finals for curtain rod fixed with screw complete all as specified and directed.
S&F, in repair, chromium plated glass shelf of size 20"(500mm long) complete all as specified and directed. .
S&F, in repair, corner glass shelf with CP brackets and with decorative railing fixed to wall complete all as specified and directed.
S&F, in repair, chromium plated, Soap dish holder complete all as specified and directed.
S&F, in repair, chromium plated, Toilet paper holder complete all as specified and directed. .
S&F, in repair pillar taps fancy type cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed 15 mm bore dia complete all as specified and directed
S & F in repairs chromium plated with long shank and cup (concealed type) 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as directed.
S&F, in repair, angular stop cock with flange complete all as specified.
S&F, in repair, Sink Cock (Table Mounted) with angular Knob, of 15mm bore complete all as specified and directed.
S&F, in repair, flush cock, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 25mm bore complete all as specified and directed.
S&F, in repair bib taps, 15mm bore, brass chromium plated, short body with wall flange.
S&F, in repair, bib taps, 15mm bore, brass chromium plated , long body with wall flange.
Supply only 32mm, waste fittings, brass chromium plated for glazed ware sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
S&F, in repair, Grating, square, 150mm size of PTMT (minimum weight 100gms) complete all as specified and directed.
Supply only PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.
Supply only PVC waste pipe 32mm bore of size 800 mm long complete all as specified and directed.
Supply only pillar taps,15mm bore , cast copper alloy , chromium plated complete all as specified and directed.
S&F, 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed.
S&F, 75mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.
S&F, 110mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.
S&F, 75mm bore PVC (SWR) bend, any radius complete all as specified and directed.
S&F, 110mm bore PVC (SWR) bend, any radius complete all as specified and directed.
S&F, in repair, PVC (SWR) floor trap, with chromium plated grating including jointing with solvent cement, dia of outlet 75mm complete all as specified and directed.
S&F, in repair, 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets and connection to pipe or lever etc. complete all as specified and directed.
S&F, in repair, vitreous china wash basin, white, flat back of size 550mm x 400mm including brackets grouted in cement mortar 1:2 in wall complete all as specified and directed. Note :- Supply only pillar taps, waste fittings, PVC connection, PVC waste pipe shall be measured and paid separately.
S&F, in repair, jet spray with 1.50m PVC tube (stainless steel), chromium plated for vitreous china padestal pattern water closet complete all as specified and directed.
S&F, in repair, central hole basin mixer with popup waste system with 450mm long braided Hoses, cast copper alloy, chromium plated, screwed down, high pressure, screwed for iron pipes of 15mm bore complete all as specified and directed.
S&F in repair health faucet with 1.0 mtr brass flexibile tube and wall hook mounted type chromiun plate for EWC.
S&F, in repair, vitreous china squatting pan, 'Orissa’ pattern, white of size 580mm x 440mm with integral foot rest (excluding flushing cistern and flush pipe) complete all as specified and directed.
S&F, in repair, brass chromium plated shower rose with or without swivel joint, 125mm size complete all as specified and directed.
S&F in repair, vitreous china bowl urinal flat back, of size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing flush pipe grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.
S&F, in repair kitchen sink without drainage board made of stainless steel 1mm thick including supply and fix 32mm CP waste coupling, plug, washer, 32 mm bore and 60cm long PVC waste pipe including cantilever brackets made of mild steel angle iron 30x30x4mm and flat iron 25x3mm both duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, cutting for and pinning in ends of brackets to errecting stand into wall and making good disturbed portion in cement mortar 1:2 or in PCC 1:2:4, type B-1 using 20mm graded stone aggregate and connecting union to pipe, over all size 495 mm x 420 mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F, in repair kitchen sink with drainage board made of stainless steel 1mm thick including supply and fix 32mm CP waste coupling, plug, washer, 32 mm bore and 60cm long PVC waste pipe including cantilever brackets made of mild steel angle iron 30x30x4mm and flat iron 25x3mm both duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, cutting for and pinning in ends of brackets to errecting stand into wall and making good disturbed portion in cement mortar 1:2 or in PCC 1:2:4, type B-1 using 20mm graded stone aggregate and connecting union to pipe, over all size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F, in repair, vitreous china wash down water closet pan (pedestal pattern), white with seat cover (including fixing bolts but excluding flushing cistern and flush pipe) complete all as specified and directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc. 15cm thickness (below or above ground level) all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.
Dismantling structural steel work including door, gates but excluding framed truss etc complete all as specified and directed
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed
Dismantling of cast iron, PVC or reinforced concrete drain pipes jointed in cement mortar for 110mm and 75mm bore of pipe from wall/floors etc complete all as specified and directed.
S&F, in repair, 0.63 mm thick, stainless steel plate rack of size 24x30x10 inch complete all as specified and directed.
ALBA AC AND REF SERVICES
Ramdev and Sons
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .