Const. of Govt. Homeopathic College with intake of 100 students college and 25 bedded Hospital Manglai, Ambala Cantt in Distt. Ambala (Pdg. Internal EI) (Recall).

Amount

(a) Main Switches 1 Supply and erection of metal clad switches / B.D.Bs with rag bolts on wall or on existing angle iron board / pedestal including bonding to earth and necessary connections . (31.12)

1.1 Triple pole switch with neutral link 32 amp. 415 Volts. (31.12(a) (xiv) Cat-B)

1.2 Triple pole switch with neutral link 63 amp. 415 Volts. (31.12 (a) (xv) Cat-B)

2 ( c ) Moulded case Circuit breakers.

Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. (31.12 (c))

2.1 15 amp.to 60 amp. 415 V ,10 KA 3-phase. (31.12 c (i))

2.2 100 amp.to 220 amp.415 V,10 KA 3-phase. (31.12 c (ii))

2.3 250 amp. To 300 amp. 415 V , 35 KA 3-phase. (31.12 c (iii))

3 S/E of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suiteble size of rag bolts with cement concrete ,duly painted with three coats of approved paint including one coat of red oxide. (31.13)

3.1 Size 40 mm x 40 mm x 6 mm. (31.13(ii))

4 M.S.Sheet . (31.14)

4.1 Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide. (31.14 (i))

5 (K) Distrubution board with plug and socket.

Supply and erection of sheet steel enclosure 2 pole / 3 pole with earth plug and socket suitable for incorporating single pole / triple pole MCB on wall / on existing pedestal complete with necessary connections etc. (31.15)

5.1 S.P.N. enclosure for single pole MCB 20 amp. (31.15 (ii))

6 Blanking sheet . (31.16)

6.1 Supply and erection of blanking sheet in existing distribution board. (31.16 (i))

7 Miniature Circuit Breaker and Isolator. ((L))

S/E of miniature circuit breaker/ isolator 240 /415 V in the existing D.B including making necessary connections. (31.17)

7.1 SP MCB of 9 KA breaking capacity 6 amp. to 32 amp. (31.17a) (ii))

7.2 SPN MCB of 9 KA breaking capacity 6 amp. To 32 amp. (31.17(a) (ii))

7.3 TP MCB of 9 KA breaking capacity 6 amp. to 32 amp. (31.17(a) (ii))

7.4 TPN MCB of 9 KA breaking capacity 40 amp. to 63 amp. (31.17(a) (iii))

8 (M) Supply and erection of Fittings and Accessories.

8.1 Bakelite angle / straight button holder large size. (31.18 (xi))

8.2 Erection only of 1x40 watts or 2x40 watts 1220 mm long / 1x20 watts or 2x20 watts ,610 mm long fluorescent tube fitting directly on wall including necessary connections with 0.75 sqmm ( 24 / 0.20 mm ) PVC copper flexible cable for connecting the tube with the adjecent point. (31.18 (xxiv))

8.3 Supply and erection of hexagonal M.S. box 1.60 mm thick having each side 8 cms , 7.5 cms deep top covered with M.S. lid by means of screws including 10 mm dia 30 cm long mild steel rod made into suitable suspension hook and erected in RCC slab for erection of fan , the bottom covered with 3 mm thick bakelite sheet with suitable holes , painting etc. complete with all labour and material required to complete the job. . (31.18 (xxvi))

9 (O) Erection and carriage of fans..

9.1 Erection of ceiling fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to the site of work. (31.20 (i) )

9.2 Erection of exhaust fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to he site of work. (31.20 (iii) )

9.3 Making suitable hole in the wall upto 450 mm sweep exhaust fan including finishing the same and fixing of wire mesh duly fixed with Deodar wood frame of section 40 mm x 25 mm thick. (31.20 (v) )

9.4 Pdg. and fixing of required size of deodar wood frame of section 50 mm x 32 mm for fixing exhaust fan upto 450 mm sweep. (31.20 (vi) )

10 (P) Pipe Laying.

Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. (31.21)

10.1 Galvanised iron pipe 50 mm dia on surface. (31.21 (vi))

10.2 Galvanised iron pipe 65 mm dia on surface. (31.21 (vii))

11 Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. (31.21)

11.1 Heavy guage welded conduit pipe 20 mm dia 1.60 mm thickness flushed. (31.21 (xxi))

11.2 Heavy guage welded conduit pipe 25 mm dia 1.60 mm thickness flushed. (31.21 (xxii))

11.3 Heavy guage welded conduit pipe 32 mm dia 1.60 mm thickness flushed. (31.21 (xxiii))

12 Supply and erection of PVC pipe of 6 kg. pressure laid 1 metre below ground level complete including digging refilling of the trench with jointing etc. (31.21(xxx))

12.1 PVC pipe 120 mm dia. (31.21(xxx) (a))

12.2 PVC pipe 80 mm dia. (31.21(xxx) (b))

12.3 PVC pipe 65 mm dia. (31.21(xxx) ©)

13 (Q) Earthing ()

13.1 Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required . (31.22(i))

13.2 Extra for using salt and charcoal / coke for pipe earth electrode as required. (31.22(ii))

13.3 Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as equired. (31.22(iii))

13.4 Earthing with tinned copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) comlete as equired. (31.22(iv))

13.5 Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode. (31.22(v))

13.6 Supplying and laying of 6 S.W.G. G.I. wire at 0.50 metre below ground level as conductor earth electrode including thimbles, soldering etc. as required . (31.22(vii))

13.7 Supplying and laying of 25 mm x 5 mm G.I. Strip at 0.50 metre below ground level as strip earth electrode including soldering etc. as required . (31.22(viii))

13.8 Pdg. and fixing 25 mm x 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required . (31.22(x))

13.9 Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required . (31.22(xi))

13.10 Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required . (31.22(xii))

13.11 Pdg. and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required with all labour and material. (31.22(xiv))

13.12 Pdg. and fixing 25 mm x 5 mm GI strip on surface or in recess for connections etc. as required with all labour and material. (31.22(xv))

13.13 Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required . (31.22(xvi))

14 Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections . (31.26)

14.1 50 Sq. mm 3.5 Core Cable . (31.26 (xxvii) Ard.)

14.2 70 Sq. mm 3.5 Core Cable . (31.26 (xxviii) Ard.)

14.3 95 Sq. mm 3.5 Core Cable . (31.26 (xxix) Ard.)

14.4 120 Sq. mm 3.5 Core Cable . (31.26 (xxx) Ard.)

14.5 400 Sq. mm 3.5 Core Cable . (31.26 (xxxv) Ard.)

14.6 16 Sq. mm 4 Core Cable . (31.26 (xI) Ard.)

14.7 25 Sq. mm 4 Core Cable . (31.26 (xIi) Ard.)

15 Supply and erection of suitable compression type brass cable glands for underground Cable. (31.28)

15.1 10 Sqmm to 16 Sqmm Cable 2 to 4 Core . (31.28 (ii))

15.2 25 Sqmm to 50 Sqmm Cable 2 to 4 Core. (31.28 (iii))

15.3 70 Sqmm to 95 Sqmm Cable 3 to 3.5 Core . (31.28(iv))

15.4 120 Sqmm to 185 Sqmm Cable 3 to 3.5 Core (31.28 (v))

15.5 300 Sq mm to 400 Sqmm Cable 3 to 3.5 Core . (31.28 (vii))

16 (X) Miscellaneous .

Supply of M.S.pipe (B-Class) for suspension rod of ceiling fan including threading if required. (31.35 (i) )

16.1 Supply and erection of 75 mm x75 mm x 60 mm deep M.S.box for telephone and inter-communication system including 2 pin 5 amp. socket including cost of bakelite sheet . (31.35 (vii) )

16.2 Supply and erection of aluminium lugs heavy duty including crimping etc. upto the entire satisfaction of the Engineer-in-charge of the work. (31.35 (ix) )

16.3 16 sqmm . (31.35 (ix)(d) )

16.4 25 sqmm . (31.35 (ix) (e) )

16.5 50 sqmm . (31.35 (ix)(g) )

16.6 120 sqmm . (31.35 (ix) (j) )

16.7 400 sqmm . (31.35 (ix) (o) )

17 Wiring in 1.5 sq.mm PVC Insulated copper conductor cable in 1.6 mm thick conduit pipe. (31.36)

17.1 Fan Point - Medium . (31.36)

17.2 Fan Point- Long. (31.36)

17.3 Light point -Short. (31.36 (ii))

17.4 Light Point - Medium. (31.36)

17.5 Light Point- Long. (31.36)

17.6 Twin control light point with 2 way 5 amp. single pole switch- Medium point. ( (iii) b)

17.7 Twin control light point with 2 way 5 amp. single pole switch-Long point. (31.36 (iii) c)

17.8 Call bell point including M.S Box of size 180mmx100mmx60mm deep for call bell - Long point (31.36 (vi) c)

17.9 3 pin 5 amp. plug point including earthing the 3rd. pin etc. - Short point. (31.36 (vii) a)

17.10 3 pin 5 amp plug point including earthing the 3rd. pin etc. - Medium point. (31.36 (vii) b)

17.11 3 pin 5 amp. plug point including earthing the 3rd. pin etc.-Long point. (31.36 (vii) c)

17.12 3 pin 15 amp plug point including earthing the 3 rd. pin etc.with 4 sq mm PVC insulated Al.conductor cable - Long point. (31.36 (viii) c)

18 S/E of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe. (31. 40)

18.1 Size 1.5 sqmm (3 / 0.81mm). ( 31.40 (i))

18.2 Size 2.50 sqmm (3 / 1.05mm). ( 31.40 (ii))

18.3 Size 4 sqmm (7 / 0.85mm). ( 31.40 (iii))

18.4 Size 6 sqmm ( 7 / 1.05mm). ( 31.40 (iv))

18.5 Size 10 sqmm ( 7 / 1.35mm). ( 31.40 (v))

18.6 Size 16 sqmm (7 / 1.70mm) ( 31.40 (vi))

19 Supply and erection of double door sheet steel enclosures distribution boards suitable for MCBs and ELCBs etc. recessed in wall including bonding to earth with all labour and material requared complete the job in all respect upto the entire satisfaction of the Engineer-in Charge of the work. (31.41)

19.1 4-way, SP & N (Horizontal) (31.41 (ii))

19.2 4-way, TP & N (Horizontal) (8+12) (31.41 (iv))

19.3 8-way, TP & N (Horizontal) (8+24) (31.41 (v))

19.4 4-way, TP & N (Vertical) (8+12) (31.41 (vi))

19.5 8-way, TP & N (Vertical) (8+24) (31.41 (vii))

20 Supply and erection of PVC conduit pipe ISI marked (Medium) recessed in wall / ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect to the entire satisfaction of Engineer-in-Charge of work. (31.44)

25 mm dia (31.44(b))

21 Supply and erection of copper lugs including crimping etc.upto the entire satisfaction of Engineer-in-Charge of work. (31.45)

21.1 1.5 sqmm to 2.5 sqmm (31.45 (a))

21.2 4 sqmm to 6 sqmm (31.45 (b))

21.3 10 sqmm (31.45 (c))

21.4 16 sqmm (31.45 (d))

22 Supply and erection of MS sadles and clamps on wall / RCC parapit for fixing underground cable at at distance of 0.60 metre centre to centre fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect. (31.48)

23 Providing & fixing modular type accessories of approved make in existing box including fixing and making necessary connection, complete in all respect. (31.56)

23.1 10 amp 1 way switch ()

23.2 10 amp 2 way switch ()

23.3 20 amp switch ()

23.4 10 amp socket ()

23.5 16 amp socket ()

23.5 Bell push ()

23.6 Fan regulator ()

23.7 Call bell Ding Dong (Monitca) ()

23.8 Blinking Plate ()

24 Pdg and fixing GI concealed sheet metal boxes with inner an outer faceplate including concealing the box in wall and fixing in position with inner plate and face plate with all labour & material required for the job complete in all respect. (31.57)

24.1 1 & 2 modules ()

24.2 3 modules ()

24.3 4 modules ( )

24.4 6 modules ()

24.5 8 modules ()

24.5 12 modules ()

25 Supply, Installation, Testing and Commissioning of Wall/ free standing flooor mounting dust & vermin proof compartmentalized cubical panel made out of 2 mm thick CRCA sheet, required hardware 3 mm thick bakelite sheet provided all along the bus bar and cable alley separating switches compartment and supporting suitable channel duly painted by 2 coat of Zinc/Red oxide primer followed by 2 coats of powder coating in grey or required shade after rinsing. The panel having PU/Neoprene rubber gasket of not less than 3 mm thicness seperate detacable gland plate MS base channel hinged door with inter locking arrangement for equipment/switch wear.Transparent acrylic sheet shall be provided in front of bus bar compartment to prevent direct access to bus bar bakelite sheet 3 mm thick for separately cable alley to BBC from switch chamber Extended solid copper bars up to cable cable alleys shall be provided for outgoing connection which shall be paid as extra items. Side walls and cable alley compartments shall be having bolted type doors withdetachable extension type structure. The panel will be complete with control wirring (copper) and fuse protection.(only outer area on all sides shall be measured) (31.63)

26 Supply and fixing of copper bus bar duly tinned by means of SMC/DMC type insulator high tensile nuts and bolts spring washers fixing to same in existing panel including bending, cutting in required shape and size and insulation with colour coding heat shrinkable PVC insulation complete in all respect. (31.64)

28 Supply and fixing of rotary handle for on / off operation of existing MCCB in the LT panel including fixing the same in position with all labour and material required to complete the job in all respect. (31.66)

28.1 Rotary handle upto 125 A, MCCB ((i))

28.2 Rotary handle above 125 A, MCCB ((ii))

29 S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 Mtr. Below ground level including diging and refilling of earth including cost of suitable size socket cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to entire satisfaction of Engineer- incharge of the work. (31.67)

29.1 HDPE Pipe 63/50 outer dia / inner dia. ((i))

29.2 HDPE Pipe 90/75 outer dia / inner dia. ((ii))

30 Supply and erection of module case circuit breaker single pole/ 4 pole on wall /on existing pedestal including bounding to earth and making necessary connection required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. (31.69)

30.1 4 pole MCCB 100 amp (v)

30.2 4 pole MCCB 200 amp (vi)

30.3 4 pole MCCB 500 amp (viii)

31 Supply and erection of heavy duty 4 pole ON load changeover load breaker switch comprising of switches 63 amp to 400 amp suitable for operation on 415 V 50 Hz AC supply complete with handle assembly having door interlock & padlocking arrangement on existing panel / including making necessary connections with petty material required to complete the job. (31.74)

31.1 100 amp 4 pole ON load changeover switch (ii)

31.2 200 amp 4 pole ON load changeover switch (iii)

31.3 400 amp 4 pole ON load changeover switch (v)

Total

32 Supply and erection of Double door Prewired enclosures distribution boards ,made of CRCA sheet steel phosphrrous cooted with copper bus bar,earth studs,din rain for incoming and out going circuit,suitable for MCBs and MCCB etc. recessed in wall including bonding to earth with all labour and material requared complete the job in all respect upto the entire satisfaction of the Engineer-in Charge of the work. (MR-1)

32.1 TPN 4 WAY VERTICAL ((i))