Tender for Supply of material, Erection, Testing and commissioning for SOP to IPH in village Kakrehar near Adharshila School by prov. 11 KV HT Line, 11/0.4 KV, 25 KVA S/stn. a/w 3 phase LT Line in Electrical Section Maranda .

Amount

Prov. Steel Tubular Pole 9 mtr. Long w/l 200 kg.

Providing of RCC pipe (Muff) ISI marked suitable for different size of steel poles 2000mm in length and 25mm thick with 250mm internal dia duly fabricated by using un-galvanized MS wire of 12 SWG Rings and 6mm MS Round in vertical direction conforming to IS 458-1988 or latest version if any. After erection of Muff the cavity between pole and muff be filled up with cement concrete 1:2:4 as per specification of HPSEBL and curing complete in all respect.

Prov. AAAC 7/3.15 mm (50 mm2)

Prov. G I Wire 8 SWG

Prov. A.I Bracing Set 2x(750x50x50mm)

Providing 11 KV Disc Insulator set cleaves and tongue hellically formed fitting

Prividing M.S Channel 100x50x6 mm Cross arm 1500 mm long suitable for fixing on both Steel & PCC Poles whatever is required Single & Double Pole Str 11 KV Lines with holes at suitable places whereever is required to adjust 5/8" dia nuts & bolts,Pin Insulators,Ball Cleaves eye shoucket & washers the Weight of M.S Channel should strictly 9.56 Kg per meter with a variation of +/-5%.The cross arm should be duly painted with two coats red oxide paint of superior quality( Tfr.Base Main Channel)

Providing M.S.Channel 100x50x6 mm Cross Arms 2400 mm Long suitable for fixing on both Steel and PCC Poles Whatso ever is required Single/Double pole Structure,11 KV line with holes at suitable places where ever is required to adjust 5/8" dia nuts and bolts,Pin Insulator,Ball cleaves,eye socket and washers confirming to REC specifications.The weight of M.S Channel should be strictly 9.56 Kg per meter with variation of +/-5%.The Cross Arm should be duly painted with two coat red oxide paint of superior quality.

Providing M.S.Channel 100x50x5 mm Cross Arms 2700 mm Long suitable for fixing on both Steel and PCC Poles Whatso ever is required Single/Double pole Structure,11 KV line with holes at suitable places where ever is required to adjust 5/8" dia nuts and bolts,Pin Insulator,Ball cleaves,eye socket and washers confirming to REC specifications.The weight of M.S Channel should be strictly 9.56 Kg per meter with variation of +/-5%.The Cross Arm should be duly painted with two coat red oxide paint of superior quality.

Prov. GO Switch 400Amp

Prov. D.O Fuse unit

A.I.X-Bracing for double pole (2700x50x50) (1500x50x50)mm X2

Prov. Stay Wire 7/8 SWG

Providing M.S. Black Hexagon Bolts and Nuts, threaded in diameters and length given below conforming to ISI-1363-1992 duly threaded with ISI mark.

Prov.Coil earthing for Steel Pole

Providing Barbed wire as per REC specification and satisfaction of Engineer In Charge including all type of leat lift etc.

Providing aluminium paint of superior quality

Providing MS Top Clamp

Providing H.T. Stay set made of M.S.round 1800 mm in length and 18 mm dia having threaded up to 300 mm on one end with one nut and one check nut to aviod slippage and an eye of 40 mm dia on other side and welded confirming to REC specification. Elbow made of M. S Channel Iron 75 x 40x 6 mm, 250 mm long and M.S Round 18 mm dia, vertical height 450 mm, both ends bend after putting in two holes in Channel Iron taking the ends out 25 mm minimum in length and welded with Channel iron one anchor of Angle Iron 65 x 65x6 mm,750 mm in length with one hole of 20 mm dia in the centre including gay assembly .The complete stay set shall be painted with superior quality black Japan paint.

Providing Danger Plate

Providing Pin Insulator with Pin hellically formed fitting

Prov. Egg Insulator

Providing 11/0.4 KV ,25 KVA Transformer

Providing ST Pole 9 mtr. Long

Providing of RCC pipe (Muff) ISI marked suitable for different size of steel poles 2000mm in length and 25mm thick with 250mm internal dia duly fabricated by using un-galvanized MS wire of 12 SWG Rings and 6mm MS Round in vertical direction conforming to IS 458-1988 or latest version if any. After erection of Muff the cavity between pole and muff be filled up with cement concrete 1:2:4 as per specification of HPSEBL and curing complete in all respect.

Providing C.I. X-Arm (2800x100x50 mm) for X-Arm Transformer base Main Channel(4 Pole Structure)

Providing M.S Channel 100x50x6 mm Cross arm 460 mm long suitable for supporting Main Channel of Transformer the Weight of M.S Channel should strictly 9.56 Kg per meter with a variation of +/-5%.The cross arm should be duly painted with two coats red oxide paint of superior quality ( For supporting main Channel of Tfr)

Prividing Angle Iron 50x50x6 mm Cross arm 2800 mm long suitable for Transformer belting the Weight of A.I.Should strictly 4.50 Kg per meter with a variation of +/-5%.The cross arm should be duly painted with two coats red oxide paint of superior quality ( For Tfr Belting)

Prividing Angle Iron 35x35x6 mm Cross arm 460 mm long suitable for Transformer belting the Weight of A.I.Should strictly 3.00 Kg per meter with a variation of +/-5%.The cross arm should be duly painted with two coats red oxide paint of superior quality ( For Tfr Belting )

Prividing M.S Channel 75x40x6 mm Cross arm 2800 mm long suitable for Fuse Unit/AB Switch the Weight of M.S Channel should strictly 7.14 Kg per meter with a variation of +/-5%.The cross arm should be duly painted with two coats red oxide paint of superior quality ( Fuse Unit/ AB switch )

Providing Angle Iron 50x50x6 mm Cross arm 2800 mm long suitable for Lightening Arrestors the Weight of A.I.Should strictly 4.50 Kg per meter with a variation of +/-5%.The cross arm should be duly painted with two coats red oxide paint of superior quality ( For Lightining Arrestor )

Prov. G.O Switch for S/Stn.

Prov. D.O Fuse unit

Provding Lightning Arrestor as per REC specification 10/176 and ISI no 3070/1974 and as per satisfication of Engineer - in - Charge

Providing Disc insulator with fiting

Providing H.T. Stay set made of M.S.round 1800 mm in length and 18 mm dia having threaded up to 300 mm on one end with one nut and one check nut to aviod slippage and an eye of 40 mm dia on other side and welded confirming to REC specification. Elbow made of M. S Channel Iron 75 x 40x 6 mm, 250 mm long and M.S Round 18 mm dia, vertical height 450 mm, both ends bend after putting in two holes in Channel Iron taking the ends out 25 mm minimum in length and welded with Channel iron one anchor of Angle Iron 65 x 65x6 mm,750 mm in length with one hole of 20 mm dia in the centre including gay assembly .The complete stay set shall be painted with superior quality black Japan paint.

Providing Stay wire 7/3.15 mm @ 8 kg. per Stay Set

Providing of L.T.Distribution Pannel box suitable for 25 KVA Transformer/Sub Station with MCCB(40A, 35KA, 4P) & SFU(32A, 4No, rewireable)

Prov.earth electrode i.e. GI pipe 38 mm dia 3 mtr long and prov. and placing in position into excavated earth pit, filling of kalmi sora 1.5 kg , charcol 60 kg and salt 60 kg in each pit along with GI Wire as required and then filling of pit with soil thereof. Complete in all respect.

Providing Half clamp MS Flat 50x6 mm as per specification and satisfacation of Engineer - in - charges

Providing M.S. Black Hexagon Bolts and Nuts, threaded in diameters and length given below conforming to ISI-1363-1992 duly threaded with ISI mark.

Prov. A.Thimble

Prov.Danger Plate

Providing Barbed wire as per REC specification and satisfaction of Engineer In Charge including all type of leat lift etc.

Prov. Lead Tin Solder 60:40

Prov. Solder Flux

Prov. LT cable 3.5 core 95mm2

Prov. AAAC 7/3.15 mm (50 mm2) for earthing and line

Prov. Energy meter 3-P, 4 wire 200/5 amp.

Providing aluminium paint of superior quality

Civil work i.e Transformer plinth etc.

Prov. ST Pole 8 mtr. Long

Providing of RCC pipe (Muff) ISI marked suitable for different size of steel poles 1800mm in length and 25mm thick with 250mm internal dia duly fabricated by using un-galvanized MS wire of 12 SWG Rings and 6mm MS Round in vertical direction conforming to IS 458-1988 or latest version if any. After erection of Muff the cavity between pole and muff be filled up with cement concrete 1:2:4 as per specification of HPSEBL and curing complete in all respect.

Prov. Egg Insulator

Providing Eye Hook

Providing L.T. Stay set made of M.S.round 1600 mm in length and 16 mm dia having threads up to 300 mm on one end with one nut and one check nut to aviod slippage and and eye of 40 mm dia on other side and welded confirming to REC specification. Elbow made of M. S Channel Iron 75 x 40x 6 mm, 250 mm long and M.S Round 18 mm dia, vertical height 300 mm, both ends bend after putting in two holes in Channel Iron taking the ends out 25 mm minimum in length and welded with Channel iron. One anchor of Angle Iron 50 x 50 x6 mm,75 mm in length with one hole of 20 mm dia in the centre. The complete stay set shall be painted with superior quality black Japan paint.

Providing Stay wire 7/3.15 mm @ 8 kg. per Stay Set

Providing M.S. Black Hexagon Bolts and Nuts, threaded in diameters and length given below conforming to ISI-1363-1992 duly threaded with ISI mark.

Providing aluminium paint of superior quality

Prov. LT AB Cable 3.5 core 70 mm2

DEEPANSHU GAUTAM GOVT. CONTRACTOR

M/S DEVARYA ENGINEERING

rukash electrical power solution pvt.ltd