Covering of fire hydrant water storage tank, construction of Retaining Walls behind fire hydrant tank and CC in front of CP Bank and pump house at 132KV S/s, Ranikhet under OandM Division, PTCUL, Almora

Earth Work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or pits of any size, including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavator soil as directed, including all leads & lifts. (DFR/ SFR)

DFR/SFR

Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12(1 cement:6 coarse sand:12 graded stone aggregate 20 mm nominal size) upto plinth level with: cement mortar 1:6(1 cement :6 corse sand) cost of all other material i.e cement, sand, stone etc. labour and T&P, leveling etc.

Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering All work upto plinth level : 1:2:4 (lCement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size ) (M15)

Providing weep hole with 75 mm PVC pipe (pressure 6 kg / sqm in proper slope)

Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete.

Supplying, stacking and Spreading 6 mm thick red bajri, watering and rolling complete including preparation of the surface and rolling.

Suppy and Fabrication of Girder Beam of Length approx. 7 mtr length each duly made of Heavy Weight M.S. I-Section 100mm x 50 mm Girder Beam including the work of Cutting, Welding, Grinding cartridge, loading unloading and carriage to the site by manual means.

Placing & Fixing of Guarders in Parallel at Equal Distance of approx. 1 Meter each having Support on Outer Walls alongwith required C.C. Work with the help of Cement, Coarse Sand, Stone Ballast Mixture in the Ratio of 1:3:6 for Covering the Guarders on all the 4 sides upto Height of Guarders & Width of Outer Wall of the water storage Tank including 12mm thick Plastering over the Exposed Surfaces.

Suppy and Fabrication of C channel to make approx. 1x1 mtr box with the help of welding on I section girder beam including the work of Cutting, Welding, Grinding cartridge, loading unloading and carriage to the site by manual means.

Fabrication of Checkered Plate Cover with the help of 6 mm thick M.S. Checkered Plate by due Cutting. Grinding, Drilling, Machining etc. with Provision of Fixing of 2 No. Hooks duly made of 6 mm thick M.S. Round Bar with due Cutting. Machining. Welding etc. then Placing & Fixing the Checkered Plate Cover in Frame duly Fabricated as per instructions of engineer-in-charge. all work including labour material and T&P.

Painting of complete M.S. Surfaces by Cleaning & Rubbing with Sand Paper & Wire Brush, then Painting with 1 coat of Red Oxide Primer & 2 coats of Black colour Paint (The 2nd coat of Paint shall be applied at the gap of 48 hrs., using 1st quality Synthetic Enamel Paint of Asian /Berger / Nerolac make)

RAGHVENDRA SINGH BOHRA (BID ID -411309)

JAILENDRA PRATAP SINGH (BID ID -412068)