PROVISION OF POL STORE AND SHED FOR GSE AT AIR FORCE STATION BIDAR

Amount

Surface excavation not exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in hard / dense soil complete all as specified and as directed.

Excavation over areas not exc 1.5 mtr deep and getting out in hard / dense soil complete all as specified and as directed.

Description all as per Ser Item No 2 above but exc 1.5 mtr deep and not exc 3.0 mtr deep and getting out in hard / dense soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard dense soil complete all as specified and as directed.

Removing excavated material exc. 250 m but not exc 500 mtr and deposited where directed complete all as specified and as directed..

Removal of excavated material exc. 1.5 km but not exc. 5.0 km and depositing where directed complete all as specified and as directed.

Removing excavated materials not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtrin depth for foundation etc or for shafts wells cesspits manholes ,pierholes,etc not exc 10sqm on plan and not exc 1.5 mtr in depth and getting out in soft / loose soil complete all as specified and as directed.

Surface dressing not exc 15 cm deep in hard / dense soil complete all as specified and as directed.

M&L for providing cement concrete 1:4:8 type D-2 mix (using 40 mm graded stone aggregate) as in foundations , filling and mass concrete complete all as specified and as directed.

M&L for providing reinforcement cement concrete RCC M-25 Design Mix (using 20 mm graded stone aggregate) as in footing, foundation,beams, plinth beams, base for columns and mass concrete etc complete all as specified and as directed.

M&L for providing reinforcement cement concrete RCC M-25 Design Mix (using 20 mm graded stone aggregate) as in columns , posts , struts etc complete all as specified and as directed.

M&L for providing reinforcement cement concrete RCC M-25 Design Mix) (using 20 mm graded stone aggregate) as in beams, cantilivers, bressummers, lintels over 1.5 mtr span complete all as specified and as directed.

M&L for providing reinforcement cement concrete RCC M-25 Design Mix (using 20 mm graded stone agg) as in slab supported on wall, beams and column in floors, roofs, landings, balconies, canopies, deck slab

S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape requred, including crancing bending and binding with mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and as directed.

S&F mild steel TMT bars 6 mm to 8 mm dia, cut to length, bent to shape requred, including crancing bending and binding with mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and as directed.

S&F mild steel TMT bars 6 mm to 10 mm dia as in stirrups, spacers and binders complete all as specified and as directed.

M&L for Form work to sides of concrete in foundations, footing base, base of columns, side and soffits of plinth beams and simillar work complete all as specified and as directed.

M&L for Form work to sides of columns , pillars , posts , struts etc complete all as specified and as directed..

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) complete all as specified and as directed.

M&L form work rough finished surfaces to sides of soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves incl supports, overhangs etc also splays between floors and beams, etc complete all as specified and as directed.

M&L for Hardcore of guage exc 63 mm but not exc. 100 mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rolled / rammed to a true surface complete all as specified and as directed.

M&L for providing 100 mm thick cement concrete PCC 1:4:8 type D-2 mix (using 40 mm graded stone aggregate)as in sub base / floors / pavings etc.complete all as specified and as directed.

M&L for providing 75 mm thick cement concrete PCC 1:2:4 type B-1 mix (using 20 mm graded stone aggregate) as in sub base / floors / pavings etc and finishing concrete surface even and smooth without using extra cement complete all as specified and as directed.

M&L for providing 75 mm thick cement concrete PCC 1:3:6 type C-2 mix (using 40 mm graded stone aggregate) and finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and as directed.

M&L for AAC (Autoclaved Aerated Concrte) block masonary, blocks exc 10 cm in width (Block size 600 x 200 x 200 mm) having compressive strength as per IS-2185 (Part-III) and set in Chemical mortar of LATICRETE or equivalent as per manufacturer directions complete all as specified and as directed. Make : - BIRLA / ULTRATEC / SHREE SHAKTI / PRIME

M&L for AAC (Autoclaved Aerated Concrte) block masonary, blocks n exc 10 cm in width (Block size 600 x 100 x 200 mm) having compressive strength as per IS-2185 (Part-III) and set in Chemical mortar of LATICRETE or equivalent as per manufacturerdirections complete all as specified and as directed. Make :- BIRLA / ULTRATEC / SHREE SHAKTI / PRIME

M&L for rendering 15 mm thick in cement mortar 1:4 for external surfaces and rendering is to be finished even and smooth with using water proofing compund as per manufacturer instructions complete all as specified and as directed.

M&L for rendering 10 mm thick in cement mortar 1:6 for internal surfaces and rendering is to be finished even and smooth complete all as specified and as directed.

M&L for rendering 5 mm thick in ceiling surfaces in cement mortar 1:3 and rendering is to be finished even and smooth complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distempet over a coat of primer complete all as specified and as directed.

M&L for preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.

S&F Anodised aluminium powder coated (minimum 50 micron thick) frame for doors, windows ventilator with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

S&F Anodised aluminium powder coated (minimum 50 micron thick) for door shutters, aluminium section weighing 0.55 kg / mtr including necessary jioning cleat, glazing clips, ruber neoprene packing, handle 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc, complete all as specified and as directed.

S&F Anodised aluminium powder coated (minimum 50 micron thick) for window and ventilator shutters, side hung type with out sash bars, aluminium section weighing 0.55 kg / mtr including necessary jioning cleat, glazing clips, rubber packing, anodised aluminium snap beading, screws anodised aluminium fittings such as peg stays 150mm long(1 No), hinges type B-21 100mm long (2 Nos) suitable handle (1 No) complete all as specified and as directed.

M&L for 4.0 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane, complete all as specified and as directed.

S&F Steel rolling shutters 1.25 mm thick, with ball bearings as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicate but gear operated type with gear box and crank handle and safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed.

M&L for 20 mm thick cement screed bed or bedding layer of cement mortar in CM 1:6 complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for 10 mm thick cement screed bed or bedding layer of cement mortar in CM 1:4 complete all as specified and as directed.

M&L for Granite tiles (of any size) 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including rubbing and polishing complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface 350 x 250 x7mm / 450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for treating the backfill in contact with foundation at the rate of 7.5 litres of ATT emulsion per square metre of vertical surfaces (Area of the substructure in contact with backfill to be measured) complete all as specified and as directed.

M&L for treating the top surface of filled earth at the rate of 5 litres of ATT emulsion per square metre of surface complete all as specified and as directed.

M&L for treating the soil under plinth protection at the rate of 5 litres of ATT emulsion per square metre of surface area complete all as specified and as directed.

M&L for wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc., and surface painting, with a layer of blown grade bitumen of any penetration applied hot @ 1.7 kg per sqm, blinded with grit or pea size gravel @ 0.006 cu.m per sq.m, and lightly tampered (area of flashings, etc., shall be added to the roof area) complete all as specified and as directed.

M&L for APP based polymeric membrane minimum weighing 3.0 kg / sqm and minimum 3 mm thick reinforced with polyster non wove fabric (weight. not less than 150 gms / sqm) land on primed surface by forced application complete all as specified and as directed.

M&L for application of aluminium paint one coat over a coat aluminium red oxide primer after preparation of surfaces of any description, over 10 cm width or girth, not otherwise described, complete all as specified and as directed.

S&F Roof truses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed.

S&F Self Supported structural roofing colour coated Galvalume (aluminum-zinc alloy-coated steel sheets with 55% aluminum, 43.5% zinc and 1.5% silicon coating ) corrugated steel sheet 1.0 mm thick (TCT) as in trussless roof in profile and 20 m span all as per manufacturer instructions using requsite mechanical equipment. Sheet comes in cold roll coils of width 0.914 m including necessary fittings / fixtures and sealing the joints all as per manufacturer instructions. The panel forming and installation is a complete on-site process. The Pre Curved corrugated Sheet, after launching is fixed at the supporting RCC structure or eave with self-splitting High Tensile Screws or Nuts & Bolts, as per manufacturer instructions and cost is deemed to included the same complete all as specified and as directed.

M&L for providing cement concrete 75 mm thick PCC 1:2:4 type B-1 mix (using 20 mm graded stone aggregate) as in sub base in floor / pavings etc and finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed

M&L for Rolling and consolidating formation surface road including berms with 8 to 12 ton power roller complete to required level gradient, slope, camber and super elevation including filling depressions with and including approved earth which may occur during rolling process complete all as specified and as directed.

M&L for hard core of crushed stones / boulders of gauge not exc 63 mm and depositing, spreading and levelling in layers not exc 15 cm thick watering and well ramming complete all as specified and as directed.

M & L for M-15 cement concrete (nominal mix) PCC 1:2:4 type B-1 mix (using 20 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M & L for Sub main wiring complete with 2 runs of 4 sqmm single core PVC insulated unsheathed FRLSH cable , 1100 volts grade, multistranded copper conductor drawn throgh and including suitable size of steel conduit and accessories surface /wall roof etc with one run PVC insulated 4sqmm FRLSH cable , copper condutor for earth continuity conductor all as specified and as directed. Note :- Two runs of PVC insulated copper wire +one run of stel conduit +one run of pvc insulated copper wire as earth continuity conductor shall be measured as one unit length

Description all as per Ser item No.58 above but submain wiring with two runs of 1.5 sqmm PVC insulated copper wire along with 1.5 sqmm copper wire as earth continuity conductor drawn in steel conduit not less than 20 mm dia complete all as directed.

M&L for point wiring with 2 runs of 1.5 sqmm single core PVC insulated FRLS cable unsheathed cable 1100 volts grade multistranded copper conductor drawn into and including suitable sized of steel conduit cocealed in wall ,roof etc . and including provision of one run of PVC inlsulated 1.5 sqmm copper conductor cable for earth continuity and connected to common earth dolly and pressed steel terminal boxes made out of 1.6 mm thick MS sheet concealed in wall and laminated sheet cover of 3 mm thick on top for housing the switches , fan regulator ,socket outlets etc complete all as specified and as directed. One light point controlled by one switch. NOTE :- Three runs of copper cable and one run of conduit shall be measured as one unit length.

Description all as per Ser item No 60 above but One Fan point controlled by one switch.

Supply and fix Switch flame proof rotary type with termination box in LM 6, 16 Amps, single pole 250V complete all as specified and as directed

Supply and fixing LED light fitting 2 x 16 Watt flame proof, CMRI certified recommended for gas / vapour group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable sizecomplete all as specified and as directed

Supply and fix Vertical TPN MCB - DB 4 way vertical type double door 415 V AC 50Hz with MCCB as incomer and TPN MCB as out going with tinned copper bus bar ,neutral link earth link complete all as specified and as directed.

Supply and fix MCCB 125 Amps 440 V 50Hz ,16 KA C series including making electrical connection with the help of Lugs / thimbles complete all as specified and as directed.

Supply and fix TPN 4 pole MCB 32 Amps 440 V 50Hz ,10 KA, D curve series including making electrical connection with the help of Lugs / thimbles complete all as specified and as directed.

Supply and fix MCB DB 6 way acrylic double door IP 43 protection, 240 V AC 50 Hz with for MCB double pole / 4 pole as incomer and DP/SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete all as specified and as directed.

S&F MCB SP 6-32 Amps , C curve 240 V 10 KA 50 Hz complete all as specified and as directed.

S&F MCB SPN 32 Amps , C curve 240 V 10 KA 50 Hz complete all as specified and as directed.

Supply and fix fame proof Heavy duty exhaust fan of size 450 mm sweep 1 phase complete with cable 3 core of size 0.5 sq mm for ceiling rose to fan , complete all as specified and as directed

S&F 70 W high efficient LED building security light , aluminium die cast housing parts for long life, pure polyster powder coated dark grey housing, high purity PMMA lenses for superior performance, toughened glass with silicon gaskets for IP 65 protection, driver cover designed suitable power factor >0.95, luminaire lumen output -6440 lm, CCCV driver with voltage range 150- 270 v AC, temperature range 0 to 50 Deg C, CRI >80,cass -1, SDCM<5, driver efficiency >85 %, power factor >0.95, THD <10 % , colour temperature -6000 K, short circuit and over circuit protection, surge protection -3 KV in CM, safety extra low voltage safe levcel <60 V DC as per IS-10322/IEC-60598 standard IP65 protected, 50000 burning hours with 70 % of its initial lumen maintained luminaire effeciency > 100 lm/W fixed complete with all accesoories and provision of PVC sheathed 3 core 1.5 sqmm copper conductor for connection complete all as specified and as directed. Make : - Havells Model No BAYBRITEFLAREHB70WLED857PWBBOLTG or equivalent in C & S / PHILIPS / Crompton Greaves

S&F Low pressure squeeze grip type CO2 of 3 kg capacity (confirming to IS -15683 ) complete all as specified and as directed.

S&F Dry chemical powder DCP- ABC type ) portable wall mounted 6 kg capacity (confirming to IS -15683) complete all as specified and as directed.

Supply and fix Fire buckets of 9 litres capacity with round bottom ISI marked (confirming to IS 2546 all as directed) the buckets should be assembled on the fixing stand complete all as specified and as direcetd

M&L for Unreinforced pre cast concrete cable cover class LV type 1 flat size 250 mm x 150 mm x 40 mm for cable protection complete all as specified and as directed.

Supply , lay and spread River sand in trenches for cushioning of underground cable / filling of cable ducts complete all as specified and as directed. Note :- Only punned thickness of sand shall be measured for payment purpose

Supply and laying in wall / duct / trench and surface LT XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 95 sqmm 4.0 core complete all as specified and as directed.

Supply and laying in wall / duct/trench and surface LT XLPE insulated, armored heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sqmm 4.0 core complete all as specified and as directed.

M&L for providing earthing with GI earth plate electrode 600 mm x 600 mm x 6.0 mm thick burried directly in ground vertically to depth of not less than 2.25 mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below ground level connected to GI earth strip of 32x6mm by means of bolts, nuts, washers of GI and provision of earth lead, GI protection pipe with 15mm light grade galvanized including necessary earth work in any type of soil, PCC 1:3:6 type CI (using 20mm graded stone aggregate) earth chamber and 1:2:4 type B1 RCC cover fitted with50mm thick with 6mm dia MS bars complete all as shown in SSR Pt - 1 electrical plate No 3. Note :- Quoted rate deemed to include the cost or excavation and earth work PCC Chamber, funnel cover etc complete all as specified and as directed.

S&F LT feeder panel board of cubical out door type, double door angle iron structure mounted made out of 2.0 mm thick CRCA sheet for outer cover and 1.6 mm thick for inners plates mounted on frame with angle iron 75 mm x 75 mm x 6 mm of suitable size, weather / vermin proof type shutter with locking arrangements, prewired with aluminium bus bar 200 Amps for 03 phase and Aluminium busbar 200 Amps for neutral including suitable CTs etc and powder coated painting, including necessary excavation and PCC foundation complete including extendable bus bar for termination of cable connected to the following MCCBs with Earthing strip GI 32 mm x 6 mm connected in feeder pillar box with suitable size Nuts & Bolts and providing the following :- (a) MCCB 4P 100A - 01 No incoming (b) MCCB 4P 32 A - 02 Nos outgoing (c )MCCB 4P 63 A - 01 Nos outgoing (d) Digital type Ammeter 0-200 Amps capacity -1No (e) Digital type voltmeter 0-500 Volts capacity withset of quantity - 1No (f) Indicating lamps R,Y,B set of 03 Nos - 01 Set. Make : - CPRI Approved

S&F Aluminium strip 25 mm x 3.15 mm with saddles and fixing screws etc for roof conductors and down conductors above ground level complete all as specified and as directed.

S & F Copper strip 32 mm x 6 mm on walls / drawn in GI tubing completeall as specified and as directed.

S& F Single pointed air termination aluminium rod , 12 mm dia ,300 mm long complete all as specified and as directed.

S&F 40 mm dia GI pipe light grade with all fitting such as bends, sockets ,reducers ,unions, etc,complete laid in trenches fixed on walls / roof as mechanical protection to copper strip complete all as specified and as directed

S &F Test point terminal block made up of polycarbonate of size 300 mm x 200 mm x 150 mm drilled and screwed including 3 Nos x 8 mm dia x 25 mm long hexagonal head screws complete all as specified and as directed.

SHANKAR

VAISHNAVI CONSTRUCTION