Enquiry No I-13065/LTE/CONT/BT

Amount

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete 10 litre capacity-White

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32mm dia

Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing uplasticised PVC connection pipe with brass unions :30 cm length15 mm nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work20 mm dia. nominal bore

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :100 mm inlet and 100 mm outlet Sand Cast Iron

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :Black solid plastic seat with lid

Providing and fixing kitchen sink including making all connections excluding cost of fittings. White glazed fire clay sink of size 600x450x250mm.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work15 mm dia. nominal bore

Providing and fixing brass stop cock of approved quality :15 mm nominal bore

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :100 mm diameter

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour.600mm long towel rail with total length of 645mm,

Earth work in excavation for Foundations of buildings, equipments, trenches, drains, culverts, manholes, etc., in all types of soils including earth mixed with slag/slag/soft rock/is integrated rock, in both Dry and Wet conditions,

PROVIDING AND FIXING C P PILLER COCK FOR WASH BASIN ETC. COMPLETE. 15MM DIA NOMINAL BORE

PROVIDING AND FIXING PVC BIB COCK (HEAVY 15MM NOMINAL BORE I/C GI FITTING LIKE SOCKET, ELBOW IF REQUIRED.

PROVIDING AND FIXING WHITE VITREOUS CHINA WATER CLOSET SQUATTING PAN (INDIAN TYPE) INCLUDING A PAIR OF FOOT RESTS OF STANDARD PATTERN 580X440MM COMPLETE.

PROVIIDNG AND FIXING WHITE VITEREOUS CHINA PEDESTAL TYPE (EUROPEN TYPE) WATER CLOSET PAN STANDARD PATTERN INCLUIDNG PVC SEAT AND LID COMPLETE.

REPAIR OF THE LEAKAGE FROM TRAPS, BENDS ETC. WITH CEMENT CONCRETE 1:3:6 INCLUDING CUTTING, REMOVING & FIXING AND GROUTING WITH CEMENT SLURRY (LEAKEGE FROM ROOF OF TOILET, KITCHEN ETC COMPLETE (CEMENT WILL BE SUPPLIED BY HCL FREE OF COST)

PROVIDING AND FIXING ON WALL FACE UNPLASTICISED RIGID PVC RAIN WATER PIPES INCLUDING JOINTING WITH SEAL RING ETC. 75MM DIA

PROVIDING AND FIXING ON WALL FACE UNPLASTICISED RIGID PVC RAIN WATER PIPES INCLUDING JOINTING WITH SEAL RING ETC. 100MM DIA

PROVIDING AND FIXING MS HOLDER BAT CLAMPS OF APPROVED DESIGN FOR CI/PVC. PIPES INCLUDING COST OF CUTTING HOLES AND MAKING GOOD THE WALL ETC. FOR

PROVIDING AND FIXING WASH BASIN WITH CI/MS BRACKETS 15MM C P BRASS PILLAR TOPS (OF APPROVED QUALITY) 32MM C P BRASS WASTE OF STANDARD PATTERN INCLUDING PAINTING OF FITTING AND BRACKETS, CUTTING AND MAKING GOOD THE WALL (WHEREVER REQUIRE)

PROVIDING AND FIXING THE JOINTS OF SOIL WASTE VENT PIPE (SPUN) WITH CEMENT SLURRY AND CEMENT MORTAR 1:2 (ONE CEMENT:TWO FINE SAND) IN CI PIPES 75MM DIA PIPE.

CUTTING CHASES IN BRICK MASONRY WALLS, CONCRETE, FLOOR ETC. AND MAKING GOOD THE SAME COMPLETE FOR CI (SPUN) PIPE OF 100MM DIA SIZE

PROVIDING AND FIXING STAINLESS STEEL A ISI 304 (18/8) KITCHEN SINK AS PER IS 13983 WITH C.I. BRACKETS AND STAINLESS STEEL PLUG 40 MM INCLUDING PAINTING OF FITTINGS AND BRACKETS, CUTTING AND MAKING GOOD THE WALLS WHEREVER REQUIRED: 460X915

Providing and fixing PTMT grating of approved quality and colour. Circular type 100 mm nominal dia

PROVIDING AND FIXING GUN METAL NON-RETURN VALVE OF APPROVED QUALITY (SCREWED END:32 MM NOMINAL BORE VERTICAL

PROVIDING AND FIXING G.I. PIPES COMPLETE WITH G.I. FITTINGS INCLUDING TRENCHING AND REFILLING ETC. 50 MM DIA NOMINAL BORE.

PROVIDING AND FIXING C.P WASTE COUPLING FOR WASH BASIN AND SINK, WASTE COUPLING 50 MM OF 83 MM LENGTH AND 77 MM BREADTH

Providing and fixing ¾" GI union

Providing and fixing 1" dia GI union

Providing and fixing ½" dia brass ball valve

Providing and fixing ¾" dia brass ball valve

Providing and fixing 1.5" dia gun metal gate valve

Providing and fixing 2" dia gun metal gate valve

Providing and fixing telephone shower

Providing and fixing float valve with all fixtures-½" dia

Providing and fixing float valve with all fixtures-1" dia

Providing and fixing ½" GI union

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:893115 mm nominal bore.

GARG ENGINEERING AND CONSTRUCTION PRIVATE LIMITED

M/S SOKHEY BROTHERS

JUGAL AND CO

M/S. P.B ENTERPRISES