RECANING OF WOODEN/STEEL CHAIR REPAIR TO SOFA SET BEDS AND RE-WEAVING OF CHARPOYS AND REPAIR OF STEEL AND WOODEN FURNITURE INCLUDING POLISHING / PAINTING AT FURNITURE YARD GE LUDHIANA

Amount

RE-CANING OF WOODEN CHAIRS: M&L for recaning of wooden chairs of Godrej Pattern with and including half round plastic cane 1.5mm to 2 mm wide and for border 3mm wide cane plastic including cutting and removing of old unsv cane from the frame complete all shown on the drawing complete all as specified & directed by Engr-in- Charge. Make of cane : Premier/Shah

Chair dining Drg No: FD-1105, 279

Chair Easy . Drg No: FD- 229

Chair writing. Drg No: FD- 280

RE-CANING OF CHAIR VERANDAH: M&L for recaning of chair Verandah with and including cane plastic 4mm wide half round complete including cutting and removing of old unsv cane from chair verandah and applying one coat of synthetic enamel paint (White) and providing four PVC shoe of best quality including removing of old unsv PVC shoes from Chair verandah all shown on the drawing complete all as specified & directed by Engr-in- Charge. Make of cane: Premier/Shah, Make of Enamel: Apcolite of Asian : FD-256 &359

CHAIR DINING/ CHAIR DINING PVC SEAT: M&L for providing following parts of Chair dining of Ist class Teak Wood as shown on drawing including dismantling & removing of old unsv parts from the frame including French polishing with one or more coats chair complete all as specified & directed by Engineer-in- charge. FD-279, 1105/MAP-II/01

Rear leg

Front leg

Side rail of seat

Front rail of seat

stiffener

Corners Between all Legs and Rails made of first class Teak Wood duly smoothed size complete all as specified & directed by Engineer-in- charge.

French polishing with one or more coats on chair frame and four PVC shoe on the leg of Chair dining

CHAIR WRITING M&L for providing following parts of Chair Writing of Ist class Teak wood as shown on drg including dismantling & removing of old unsv parts from the frame including French polishing with one or more coats chair complete all as specified & directed by Engineer-in- charge. FD-280

Rear Leg

Front leg

Side rail of seat

Front rail of seat

Stiffners

French polishing with one or more coats on chair frame and four PVC shoe on the leg of Chair Writing

CHAIR EASY M&L for providing following parts of chair easy of Ist class Hard Wood as shown on drawing including dismantling & removing of old unsv parts from the frame and French polished with two coating through out the item. complete all as specified & directed by Engineer-in- charge. FD-229

Rear leg

Front leg

French polishing with one or more coats on chair frame and four PVC shoe on the leg of Chair Easy

CHAIR DINNING CUSHIONED M&L for providing following parts of Chair Dining Cushioned including dismantling& removing of old unsv parts from the frame including French polishing with one or more coats tablecomplete all as specified & directed by Engineer-in- charge. FD/E6/MAP/04

Cushioned seat as shown on drg complete all as specified & directed by Engineer-in- charge.

Rear Leg made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Front Leg made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Corners Between all Legs and Rails made of first class Teak Wood duly smoothed size complete all as specified & directed by Engineer-in- charge.

Stiffeners made of first class Teak wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

French polishing with one or more coats on chair frame and four PVC shoe on the leg of chair all as specified & directed by Engineer-in- charge.

S&F in replacement PVC seat of CHAIR DINING with 20mm steel screw and providing four PVC shoe of best quality including removing of old unsv PVC shoes from Chair verandah all shown on the drawing complete all as specified & directed by Engr-in- Charge. FD/MAP-II/01

S&F in replacement PVC seat & back of CHAIR VERANDAH and applying one coat of synthetic enamel paint (White) and providing four PVC shoe of best quality including removing of old unsv PVC shoes from Chair verandah all shown on the drawing complete all as specified & directed by Engr-in- Charge. FD/MAP-II/06

Supply and fixing of the following components of CHAIR WRITING CUSHIONED / CHAIR VISITOR dismantling unserviceable components all as specified and shown on drawing all as specified & directed by Engineer-in-Charge. FD/E6/MAP/12

Replacement of Arms (set)

Supply and fixing of cushioned seat as shown on drawing including removing/taking off old unsv Cushioned seat complete all as specified and as directed by Engr-in-Charge.

Supply and fixing Cushioned back as shown on drg including removing/taking off old unsv Cushioned back complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of the following components of CHAIR REVOLVING / CHAIR COMPUTER all as specified and shown on drg. FD/E6/MAP/01, 75M

Replacement of PVC Base of chair revolving.

Replacement of Shocker of chair revolving.

Replacement of Arms of chair revolving (set)

Removing of old material i.e.rexine cloth ,cloth marking ,fome seat & back etc and material and labour for providing the above mentioned items

Replacement of ply BED HARD STEEL / CHARPOY I P and fixing new 12mm thick plywood BWR grade with 50mm long 4mm dia fully threaded nuts and bolts with washers on both side 2 No in each short rail including rounding off the corners of plywood complete all as specified and directed by Engineer-in-Charge. make:- Orchid / century / Greenply. FD/E6/MAP/08R & FD/MAP-II/01

M&L for providing PVC shoe of best quality including removing of old unsv PVC shoes from Bed Hard Steel/ charpoy IP complete all as spfd and as directed by Engr-in-Charge .

SUPPLY OF FOAM CUSHION OF 32 DENSITY OF SIZE 21" x22" x4" covered with superior quality tapestry cloth as approved by the GE including Removal of old unsv cushion and tapestry cloth of Sofa Sets Make of Cushion : Sleep Well/ curlon.

SOFA SET THREE SEATER : French polishing with one or more coats on sofa frame all as specified & directed by Engineer-in- charge. FD-373, FD/MAP-II/02

SOFA SET SINGLE SEATER : French polishing with one or more coats on sofa frame all as specified & directed by Engineer-in- charge. FD-373, FD/MAP-II/02

TABLE DINNING FOR 6 PERSONS M&L for providing following parts of table dinning for six persons including dismantling & removing of old unsv parts from the frame including French polishing with one or more coats table complete all as specified & directed by Engineer-in- charge. FD-273, FD/MAP-II/03

Table top made of 18mm thick block board with 0.8 mm thick teak face lamination sheet teak wood beading around the top 4mm thick fixed with nails complete all as specified & directed by Engineer-in- charge.

Long rail made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Short rail made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Leg made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Corners Between all Legs and Rails made of first class Teak Wood duly smoothed size complete all as specified & directed by Engineer-in- charge.

French polishing with one or more coats on table frame and four PVC shoe on the leg of Table all as specified & directed by Engineer-in- charge.

TABLE CENTRE M&L for providing following parts of Table Centre including dismantling & removing of old unsv parts from the frame including French polishing with one or more coats table complete all as specified & directed by Engineer-in- charge. FD-274

Table top made of 18mm thick block board with 0.8mm thick teak face lamination sheet teak wood beading around the top 4mm thick fixed with nails complete all as specified & directed by Engineer-in- charge.

Leg made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge

Long rail made of first class Teak wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Short rail made of first class Teak wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Stiffners made of first class Teak wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

French polishing with one or more coats on table frame and four PVC shoe on the leg of Table all as specified & directed by Engineer-in- charge.

TABLE PEG M&L for providing following parts of Table Peg including dismantling& removing of old unsv parts from the frame including French polishing with one or more coats table complete all as specified & directed by Engineer-in- charge. FD-277

Table top made of 18mm thick block board with 0.8mm thick teak face lamination sheet teak wood beading around the top 4mm thick complete all as specified & directed by Engineer-in- charge.

Leg made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge

Long rail made of first class Teak wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Short rail made of first class Teak wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

Stiffners made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

French polishing with one or more coats on table frame all as specified & directed by Engineer-in- charge.

TEAPOY M&L for providing following parts of Teapoy including dismantling & removing of old unsv parts from the frame including French polishing with one or more coats tablecomplete all as specified & directed by Engineer-in- charge. FD-278

Table top made of 18mm thick block board with 0.8mm thick teak face lamination sheet teak wood beading around the top 4mm thick fixed with nails complete all as specified & directed by Engineer-in- charge

Long rail made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge

Short rail made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge

Leg made of first class Teak Wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge

Stiffners made of first class Teak wood duly smoothed size and shape as shown on drg complete all as specified & directed by Engineer-in- charge.

French polishing with one or more coats on table frame and four PVC shoe on the leg of Table all as specified & directed by Engineer-in- charge.

TEAPOY VERANDAH M&L for providing following parts of Teapoy including dismantling & removing of old unsv parts from the frame including Paint with one or more coats tepoy frame complete all as specified & directed by Engineer-in- charge. FD/E6/MAP/17

Teapoy Verandah top made of 18mm thick block board with 0. 8 mm thick teak face lamination sheet teak wood beading around the top 4mm thick fixed with nails complete all as specified & directed by Engineer-in- charge

M&L for providing PVC shoe of best quality including removing of old unsv PVC shoes from Teapoy Verandah complete all as spfd and as directed by Engr-in-Charge .

S&F in replacement TABLE COMPUTER of the following components as specified and shown on drg. FD/E6/MAP/01

Teliscope channels for table.

Knob Teak shade as per trade complete.

PREM CONSTRUCTION COMPANY

PACHNANDA BUILDERS