Consrtuction of Kabaddi Shed in Gundur Panchayat

Consrtuction of Kabaddi Shed Gundur Panchayat. Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth and earth mixed with small size boulders SS.20B and sand, silt or other loose soil wet sand or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water whenever necessary refilling the sides of foundation with excavated soil other than sand in layers of 15cm thick well rammed and cleaning and levelling the site etc., complete - Open Earth Work Excavation

Supplying and filling in refilling in foundation and basement with excavated earth well rammed watered and compacted - etc., complete complying with standard specification.

Supplying and Filling in Foundation and basement with filling sand in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Plain Cement concrete 1:4:8 (one cement, four sand, eight aggregate) using 40mm guage hard broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted, etc., complete complying with standard specification.

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, Plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild Steel sheets of size 90cm x 60cm and BG stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding, laid over oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specification - Plinth Beam

Plain cement Concrete 1:3:6 mix using 40mm Guage hard broken granite stone jelly for Foundation including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted,etc., complete complying with standard specification.

Plain Cement Concrete 1:1,5:3 mix using 20mm guage hard broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted,etc., complete complying with standard specification.

Brickwork in CM 1:5 (one cement & five sand) using III class Country bricks of size 8 including finishing, curing, etc., complete complying with standard specification

Plastering with cement mortar 1:5 (One Cement, Five Sand) 12mm thick in all floors including cost and coveyance of all materials to site and Labour charges etc., complete as per standard specifications.

Supplying and fixing in position of aluminium anodised color matt finish Louvered Ventilator. The outer frame will be 62x38x2mm @ 1.17 Kg/m and the louvers with moving arrangements will be made with Alu. Channel of size 60x30x4 mm @ 1.27kg/m with necessary glass pans for louvers 4mm thick AI. Clips, including all materials, labour & power consumption charges required for fabrication if neccesary chipping dismantling making holes in RCC columns, beams or masonry wherever necessary with power drill to the extent required and make good to the original conditions after fixing etc.,complete. The Aluminium surface is to be anodised with matt finish under electricity controlled condition in accodance with ISI specification 1868/1962 of anodic film thickness of not less than 15 micrones (fifteen) for all sections.

Painting 2 coats with approved cement Emulsion paint over cement plastered wall surface, ceiling and other new surface and including cleaning, preparing the surface and curing etc., complete.

Supplying, fabricating, recting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to Is specification including primer coating and enamel painting as per Design given by the departmental officers etc., complete as per standard specification.

Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Supplying and filling in gravel in well rammed watered and compacted - etc., complete complying with standard specification.

Name board charges

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}